Fusion Pro still the best? BRX01 and Hobbywing Quicrun Fusion Pro 2300kv

[@KobtsevRC]

#fusionpro #fusion2300kv Thank you very much for watching and your support! Your comments and likes are very important so that my work is not wasted! I hope you liked it!

[@edsadventures3575]

It looks like you turned the foc off. That’s what makes it great, when the esc controls the modulation when holding the trigger at a low rate. It keeps the same speed the whole way thru obstacles. I have 2 of them. They are amazing! Great vid!

[@KobtsevRC]

Thank you very much for your support. Now I have 2 of them too.

[@BUILTLIGHTWOUNDTIGHT]

This system has 9 levels of punch control, and running the 22 tooth pinion in the TRX4 Blazer. It will wheelie in first gear, and after going to second gear. It pulls a power wheelie in second gear, this system is incredibly powerful!!! This is a very impressive system!!! 😎

[@KobtsevRC]

Thanks for the info! Im really like this motor! What's important to me is that it takes up less space, fewer wires, and is super smooth, I've never seen smoother.

[@BUILTLIGHTWOUNDTIGHT]

@@KobtsevRC I love all those same features as you do! This system is 7.2 oz with the 1800kv and that is 4.2 oz lighter than the stock XL5 ESC, and the 550R motor. I still need to weigh this new 2300kv system, but it could be a little bit lighter than the version one.

[@KobtsevRC]

For me, its weight does not matter, the main thing for me is that it works well. The old version of 1800kv suited me completely. This new chassis has two gears which means I can go very slow and very fast in second gear. I like it! I like to drive sometimes.

[@ConditionZero76]

22 tooth in a crawler ?? You should be around 12 / 14t Volt up gear down in Crawlers

[@redndeyes]

Absolutely love my fusion pro in my trx6. That sloooow control baby!

[@KobtsevRC]

Yes, it will be perfect for my Discovery and realistic driving

[@uok_rc]

Thank you for this vid! I had literally just upgraded to the motor this morning and say your vid. Nice to know the speeds and compare since this is my first brushless motor. Loving the slow speed modulation available and can go pretty fast when needed! :)

[@KobtsevRC]

Glad it helped! This is truly the best motor I have ever owned. And his old version also proved to be excellent. I love it because there is a lot of free space in your model and less wires.

[@czabatrans4420]

Going slow and smoothly is much cooler for me!

[@KobtsevRC]

Yes, that's right, but I showed both options.

[@czabatrans4420]

I just bought the Fusion 1800 based on your review for my BRX01. Until now I was running brushed 80T motors with the Quicrun 1080 ESC in my crawlers, great ESC, but this is night and day difference. Absolutely amazing! With the brushed setup car takes 10 seconds to run 30 cm distance at slowest speed, this takes 35 seconds to run 30 cm. I love going slow, the realism in it and it’s so quiet! I’m buying another two! Thanks for the review!

[@KobtsevRC]

I'm glad this video helped you! Thanks for support!

[@czabatrans4420]

@@KobtsevRC where are you from? Your videos are absolutely amazing! I am in Slovakia

[@KobtsevRC]

I'm from Ukraine! Thank you very much for your support, I appreciate it!

[@MikeRCWorld]

Great setup for brx01 👍🤠 Nice tests, cool video my friend 👌☺

[@natkobe3158]

Дякую за інформативне відео 👍👍👍👍

[@KobtsevRC]

Дякую за підтримку і перегляди!

[@PassionHobbyRC]

Very nice 🙏🥰

[@KobtsevRC]

Thanks I hope you enjoyed 💙💛💙💛

[@RCplamodel]

*THIS WAS SOOOOO FANTASTIC DUUUDE!!!! real cool video👍*

[@KobtsevRC]

Thanks so much my friend. I’m cant wait when I’m finish this rig. See you soon.

[@ErbsenHack161]

Your videos are so beautiful and informative ❤❤❤

[@KobtsevRC]

Glad you like them! Thank you so much!

[@ErbsenHack161]

That's not a criticism! Please censor your child there are such strange guys on the internet.

[@KobtsevRC]

ok thanks

[@ErbsenHack161]

You are a really really good guy❤️❤️❤️

[@KobtsevRC]

@@ErbsenHack161 thanks for all 🇺🇦🇺🇦🇺🇦

[@alexhobbyman]

Cool video, your level is growing, keep it up

[@KobtsevRC]

Thanks, will do!

[@shortyrcpassion632]

J adore ce moteur merci pour cette vidéo de démonstration 👍✌️

[@KobtsevRC]

Yes, I fell in love with it after the first version of 1800 kv and so I decided that I should try Fusio Pro 2300kv

[@O3Sraji_ch]

A very easy to understand verification video.💯 Very informative.👍

[@KobtsevRC]

Glad you liked it! This is really very good to hear! I'm glad to see you here! Your support and comments that you leave really help the video to move up. Thank you!

[@davidambrozi8179]

I love this build! Very cool my friend

[@KobtsevRC]

Thanks a lot! I get new wheels in a couple of days and continue building!

[@guly2004]

I love your videos. I love the light, how you mount it etc. Super cool. Are you in scandinavia or north europe?

[@KobtsevRC]

Thank you very much for your support! I am very glad that you like what I do! I'm from Ukraine! We have problems in our country now, so doing what you love is not very easy. I hope peace will come soon, I really want this and then I can shoot more!

[@guly2004]

@@KobtsevRC ho shit, is a terrible moment, I have ucrainian friends and is really hard. I hope this war is stopping. Amazing you are able to do this.

[@KobtsevRC]

It is not simple! I'm relatively far away but all the same rockets fly over my head

[@islandrc-duke1972]

Awesome system and RC, great test

[@KobtsevRC]

Glad you enjoyed it! Thanks for support!

[@islandrc-duke1972]

@@KobtsevRC 😁👍

[@ClassicSteelRC]

Awesome video! I'd love to get a brushless system when I have the money for it! I haven't been able to have such smooth slow speed control with my brushed motor/ESC combo.

[@KobtsevRC]

Yes Fusion super cool system! I like this so much

[@GARYU-S44]

Thank you for sharing the very helpful video 👍 my friend🤝🎶😆

[@KobtsevRC]

Thanks so much. I’m really glad see you there.

[@GARYU-S44]

@@KobtsevRC 👍😆🍻

[@renercadventures]

Excellent video my friend 🤩👍

[@KobtsevRC]

Thanks so much! I’m glad if you like this video! I’m really tried hard. See you soon.

[@carloshnunez]

Very nice how slow it goes and with torque 🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵

[@KobtsevRC]

Yes it really slow. I like this motor!

[@quarrycrawlerrc]

Looks great, so the model and, as always, the clip😜👍 I think you're on the right track with the combo, I've been driving the 1800kv in my Sherpa for 1.5 years without the slightest problem and will probably also use the 2300kv in the BRX02🔧🛠 Maybe I'll swap the two and take the big one for the Sherpa. Put your finished model on the scales when you're done, I'd be interested to know what it weighs ready for use with the battery 🤔

[@KobtsevRC]

Thank you very much for your rating! Yes, I also had an older version of 1800kv, but on that chassis there was only one gear and I did not have enough speed. Do you have input with a body?

[@quarrycrawlerrc]

@@KobtsevRC Okay, thats good to know👍Depends on what you want to build. I tend to place the chassis in the scale division, I would rely on something else for performance, but I think you see it the same way. My ideas for the chassis would now be an expedition vehicle or a trail rescue rig, personally I will probably rely on the BRX02 because I want to build a classic "Camel Trophy" Defender. What kind of body do you have in mind?

[@domirc5474]

Bravo for your son ! 👏😃😉

[@KobtsevRC]

Thanks so much I’m really appreciate it 💙💛💙💛

[@PakWahyu]

Very cool brooo🤠🤠🤠👌👌👌👌

[@KobtsevRC]

Thanks a lot for your support. I am very glad that you like it. I appreciate it!

[@jasongilbert6992]

Your son has better control then me 😆

[@KobtsevRC]

))))) Thank you very much for watching and supporting!

[@epicstrengthinsanity1235]

Do you think this fusion pro 2300 kv work on stock Axial 1/10 SCX10 III Early Ford Bronco esc? Thank you for reading this.

[@KobtsevRC]

I think yes. Why no.

[@epicstrengthinsanity1235]

@@KobtsevRC thank you :)

[@KobtsevRC]

No problem!

[@myrcfun9183]

amazing 👏

[@KobtsevRC]

Thank you! Cheers! Im glad see you here! Thanks for support!

[@m.a.s.hq8715]

So it is not worthy to upgrade from 1800 to 2800 ??

[@KobtsevRC]

only if you have one gear and want a little faster. Other than that, you won't notice a difference. But if you did not have a 1800 kv version, I recommend taking 2300 kv

[@m.a.s.hq8715]

I have axial scx 10 iii gladiator.. so i assume it is one gear only with 1800 combo hw ... so i'm planing to upgrade to either 2800 or 3300 ...

[@KobtsevRC]

Yes, it's a good choice! I think 2800 will be good for you

[@m.a.s.hq8715]

@@KobtsevRC thanks bro u were helpful 👌

[@KobtsevRC]

No problem! I myself have little experience, but what I tried I know! Always glad to see you here!

[@ka4172]

Inside the 32 bit chip.

[@KobtsevRC]

Cool! And what does it change?

[@JoeOvercoat]

One might say “It’s not slow-motion. It’s slow motion.”

[@KobtsevRC]

What do you mean? Did I make a mistake in the caption? Thanks for the tip!

[@JoeOvercoat]

@@KobtsevRC No, you're good. I just enjoy word play.

[@julianorozco761]

hola mi Hermano como estas , como esta tu Hijo , aprendiendo del maestro te felicito yo tambien tengo hijos , me gusta el nuevo motor , saludos mi Hermano te deseo un excelente video y gracias por compartir Dios te bendiga siempre

[@KobtsevRC]

Thank you very much for your support! This is very helpful for development. I'm glad you like what I do! Thank you! Peace for everyone

[@rc-daily]

The hobbywing stuff should have Bluetooth and do away with the cards all together.

[@KobtsevRC]

Yes, that would be very cool! I do not understand why this is not there, perhaps saving space?

[@rcarty419]

Ohhh love me some fusion FOC! Just so nice less mess and just works perfect for me.....slow rolling... Big sub dude!!! Check me out sometime!!

[@KobtsevRC]

Yes its cool motor. I dont like a lot of wires and we have more free space.

[@fnkrc1393]

Wow boss Look at me boss new friend new all

[@KobtsevRC]

Thanks a lot for your support. I am very glad that you like it. I appreciate it!

[@familyvideomagazine10rus]

Такой английский я ещё не слышал)))... Дружище говори на своём родном лучше))).

[@KobtsevRC]

Зараз я би ще поради слухав від rus

[@politening8303]

Русский?)

[@KobtsevRC]

нет