HOBBYWING Fusion Pro 2300kv Installation. Setup and Calibration. TRX4 Bronco 2021 (Raptor) #1

Installing a Hobbywing Fusion Pro 2300kv instead of my old Hobbywing AX R2 2800kv and seeing how much smoother and quieter it is to run. I think the Fusion Pro 2300kv is the best combo for my Traxxas TRX4 Bronco 2021. I'll show you how I tune and oscillate this Fusion Pro 2300kv motor.
More about Hobbywing Fusion Pro 2300kv • Fusion Pro still the b...
HOBBYWING Quicrun Fusion PRO 2300KV FOC System 2in1 amzn.to/3S9lUjT
s.click.aliexpress.com/e/_DCp...
H-TECHPRODUCT bit.ly/3LZF4FR (10% discount code: kobtsevrc10)
Aluminum Metal ''Raptor Type Fender Flare'' amzn.to/3F9w3bf
Aluminum Metal Roof Rack amzn.to/41T5Jfj
Tires RC4WD Mickey Thompson 1.9" Baja MTZ P3 4.6" Scale Tires store.rc4wd.com/RC4WD-Mickey-...
Thanks for the channel membership:
Pure RC
Quarry Crawler RC
Join this channel to get access to perks:
/ @kobtsevrc
Chapters:
0:00 Unboxing Hobbywing Fusion Pro 2300kv
0:39 How smooth my old Hobbywing AXE R2 2800kv
1:00 Removing my old motor AXE R2 2800kv
2:11 Install Hobbywing Fusion Pro 2300kv
2:49 Hobbywing Fusion Pro 2300kv settings
3:35 Calibration Fusion Pro 2300kv
3:58 How smooth Hobbywing Fusion Pro 2300kv
4:40 Test Fusion Pro 2300kv
5:35 Hobbywing Fusion Pro 2300kv speed
5:50 In the next episode
MY SHOOTING GEAR: (Amazon Links)
Camera : iphone 11 (4K/60fps)
Gimbal : zhiyun smooth 4 (3-axis stabilization gimbal) amzn.to/3Gpd0aB
Big camer Sony A7C amzn.to/3udJ7HP
My Mini Tripod amzn.to/34XKKPJ
MY BUILD HARDWARE:
Xiaomi Mi Cordless Screwdriver
amzn.to/3WWPGKO
s.click.aliexpress.com/e/_DBO...
Hex Screwdriver
amzn.to/3Adpyl1
s.click.aliexpress.com/e/_Dkk...
s.click.aliexpress.com/e/_DBy...
Electric Precision Screwdriver
s.click.aliexpress.com/e/_DdW...
amzn.to/3tvm8Gy
Soldering iron TS101
amzn.to/3GgDIG0
s.click.aliexpress.com/e/_DFr...
Engraver
amzn.to/3EwYe42
Helping Third Hand Tool
amzn.to/37XKFNl
s.click.aliexpress.com/e/_9Hf2S5
Bolt Screw
s.click.aliexpress.com/e/_DEy...
amzn.to/3g6z9Ds
Blade Knife
s.click.aliexpress.com/e/_DFV...
amzn.to/3V1xT3c
SUPPORT ME:
Subscribe to my KZbin channel kzbin.info?s...
My Patreon / kobtsevrc
👕Merch👕 kobtsevrc.myspreadshop.com/
Music www.epidemicsound.com/referra...
FOLLOW ME:
Instagram: / kobtsev_rc
Twitter: / dmitrykobtsev
Facebook: / kobtsevrc
DISCLAIMERS:
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
By using some of the affiliate links above, I may receive a small commission, at no extra cost to you. This is the easiest way to support me and helps me continue making content like this for you. Thank you 🙏
#fusionpro #hobbywingfusionpro #fusion2300kv #trx4 #trx4bronco2021raptor #trx4broncoupgrade #kobtsevrc

[@KobtsevRC]

If you put your thumbs up it will help a lot More about Hobbywing Fusion Pro 2300kv kzbin.info/www/bejne/rn6zqKeEZbF3fsk #fusionpro2300kv #hobbywing2300kv #trx4upgrade

[@Schmitty4564]

I like how you explain how you install products. It helps alot. You deserve way more subscribers! Nice work!

[@KobtsevRC]

I appreciate that! Maybe someday this will happen. See you)))

[@ZacksRC]

4:20 I love how you can hear the clock in the background. That just shows how quiet it is. Hope you like the new motor 👍

[@KobtsevRC]

Yes, this is not my first motor, this is the second one. the first one I installed on BRX01 Thanks for your support and watching!

[@RCplamodel]

*Your Bronco is getting better and better!~ That bronco looks so awesome 👏👀 great mods, thanks for sharing this video, i love it 😍🙌*

[@KobtsevRC]

Many Thanks 🙏 I’m appreciate it. Yes Fusion pro really cool

[@ClassicSteelRC]

Amazing slow speed modulation on that new motor! That'll definitely be my next upgrade!! Also, thanks for posting my comment for your previous video! 🙂👍

[@KobtsevRC]

No problem my friend! It's a really good motor, I love it!

[@wolfbanger2124]

Got my first Fusion Pro today and installed into my Ascent and OMG! I get all the hype, ive never been able to crawl at such a controlled and slow speed. You can almost count the spur teeth as they go by its so slow.

[@natestapp5573]

Such a great video! Loved all the editing....Very well done....And for me, I just got this 2300kv motor for my TRX-4.....So I can't wait to install it. I also got a 13 tooth pinion (11 stock) With crawling this slow I can afford to give up some low range from the gearing....Now I can have both speed and crawl. Hopefully! Shooting for 20mph in 2nd, and snails pace in low range!

[@KobtsevRC]

13 teeth is a good idea, I think you can afford it. Thanks for the support, glad you liked it!

[@halfkat4742]

Great video as always, I just got the same motor for my bronco, can't wait to try it 🤩

[@KobtsevRC]

Good choice! Its super cool motor i like that! Super smooth. See you!

[@thebestdjhits]

Just got this motor as well cannot wait to install it

[@KobtsevRC]

I think you will be pleased! Thank you for watching!

[@Fourwheeljive]

Wow! Big difference.

[@KobtsevRC]

Yes))) Thanks so much for watching

[@SandJ-Adventures]

Wow, neat video that really shows the improvement that motor makes to the slow speed operation! 👍 I'll be interested to see some crawling footage with the "cruise" on - makes for easier filming while driving! 😄

[@KobtsevRC]

Yes, it's much smoother. But I don't think cruising is easier. Thank you very much for visiting and viewing!

[@JoeOvercoat]

4:02 🤯

[@JoeOvercoat]

@@KobtsevRC You can set the multifunction knob on your TQI transmitter to act as a throttle trim, where some people use this as a cruise with great success. P.S. You do not need the Bluetooth module to access any of the controls’ adjustments on your TQi transmitter…but it’s handy, especially when one forgets what the settings are for a given model in its multi-model tree. For example, whether the multi-function knob is controlling punch or degree of stabilization.

[@KobtsevRC]

I think it's difficult for me))) But at the moment I'm happy with the result!

[@renercadventures]

I love the way you upgrade my friend 😹👍

[@KobtsevRC]

Thank you very much for watching! My friend bailed me out and sent me a gear

[@renercadventures]

@@KobtsevRC hahaha😹👍

[@KobtsevRC]

@@renercadventures Am I wrong?

[@JoeOvercoat]

@@KobtsevRC in a giant envelope, no less. 😂

[@renercadventures]

@@KobtsevRC nop

[@bcochener]

Excellent! Just picked up one of those motors!

[@KobtsevRC]

Good choice! I have 3. Im relly heppy.

[@O3Sraji_ch]

Fusion is very popular around me.😎 It is very easy to operate.🤘 It's a great motor.😎

[@KobtsevRC]

Yes, this is my third motor. I love it very much. Thanks for watching and support me. See you in next video.

[@adamsearle4823]

When u have that problem with a pinion screw use a square bit size s0 and tap it in works great !!!!

[@pandacrawler6x6]

A very Naice upgrade! Cool Info and tips (and Funny) tutorial! LOVED! Cheers!

[@KobtsevRC]

Thank you! Cheers! Glad you like it!

[@pandacrawler6x6]

@@KobtsevRC 🐼

[@KobtsevRC]

I appreciate it

[@EricsRC]

Liked and subbed brother!! I love my hobbywing 2300kv!!!

[@KobtsevRC]

Thanks for the sub! Yes i like too. I will tested in future.

[@TheHermanhunter]

i will try it on my trx6….. Nice sharing friend…… ❤❤❤❤

[@KobtsevRC]

Thank you so much 👍Glad you like it!

[@eduardorivas2197]

I LIKE IT...GREAT JOB MY FRIEND.

[@KobtsevRC]

Thank you very much! Glad you like it!

[@tsenif]

Thank you so much for this video.

[@KobtsevRC]

Glad it was helpful! Thank you very much for your support!

[@GARYU-S44]

Very good video 👍 Thanks for sharing my friend😆👌🤝

[@KobtsevRC]

Thanks for visiting watching and comments!

[@GARYU-S44]

@@KobtsevRC 😁👍

[@mauriciodelvalle4648]

Yeap u got a great motor... I have 3 of those and ate amazing

[@KobtsevRC]

👍 yep I have 3 also. One old and two pro

[@gtrf25rc]

Awesome bro👍👍👍👍👍

[@KobtsevRC]

Thanks for the visit! Glad see you like it)))

[@natkobe3158]

Дякую за інформативне відео 👍👍👍

[@KobtsevRC]

Немає за що! Дякую за перегляд!

[@matusknives]

Awesome. Being not too experienced in the RC world so far I was happy to learn, that one can keep using the stock radio (and thus I suppose the receiver). Helps to keep the invest down a bit.

[@KobtsevRC]

Glad to help! Yes, you can use an old radio, but it's a very poor quality radio. The smoothness of the trigger is very low.

[@matusknives]

@@KobtsevRC thank you. I understand that getting a better radio is definitely going to improve the overall experience, but it is nice to know that one can upgrade these two components separately.

[@KobtsevRC]

Sure its really cool.

[@JoeOvercoat]

@@KobtsevRC It does creak & feels like the throttle is turning on bushings (not bearings), and the steering spring response* is a bit stiff for crawling, BUT the bluetooth module, paired with a smartphone, provides configuration info & adjustability, and even run-time telemetry, that is best in class and just the ticket for ‘daily driver’ bashing & racing. * I run a DX4C Tx on my SCX10 that has had the steering spring removed and it is great for finesse when crawling and PERFECT FOR CONTINUITY WHEN FILMING of the steering angle from clip to clip.

[@JoeOvercoat]

@@matusknives I suggest that you consider the FlySky GT3C. 👍 Can be paired with a FlySky Rx with stability control, even. The Spectrum DX5C is another worthy contender, but be advised its grip is larger, for better or worse (if you have short fingers, it’s not for you).

[@temanfriends]

Nice video bro ❤️🔥👍👍 Uraa

[@KobtsevRC]

Thanks so much for watching and commenting.

[@Rcloverofficial]

superb..🔥👍

[@KobtsevRC]

Thank you so much 😀

[@SevenWelt]

Hello, Nice update! Greetings Seven🖖

[@KobtsevRC]

Thanks for the visit

[@SevenWelt]

@@KobtsevRC 😀

[@Bradkozakandfriends1830]

Good choice. I’m hoping to do the same to mine.

[@KobtsevRC]

Yes it’s really big difference. Much better and smoother.

[@xXB.FunkXx]

I have a fusion pro in a axial 2.0. it has so much torque it will snap metal axles if you bind them up and it does it like they were made of wood.

[@JoeOvercoat]

0:26 ARE YOU CRAZY THAT’S NOT SOOOOOOOOOOOOUP! 🤪

[@KobtsevRC]

Damn it, I was fooled again, I thought it was soup))))

[@JoeOvercoat]

@@KobtsevRC Everyone knows soup doesn’t come from a packet, it comes from a *can*. 🇺🇸 🇺🇦

[@KobtsevRC]

:) UA US

[@flipertrucks]

Good job.

[@KobtsevRC]

Many many thanks! Im glad see you like it! See you in next video)))

[@RC_TRX4]

this is perfect. What if it is mounted on a land rover defender? Is 1800kv or 2300kv better when climbing?

[@christopheralves2026]

Since the traxxas trx 4 uses a few smaller servos would it be possible to set the bec on the fusion pro to 7.4 volts and use an after market steering servo capable of that power without frying the smaller shifting and diff lock sevos.

[@MegaTraxxas]

Is it possible to set in a way, where there's a free running (like on brushed motor). So when i release the throttle motor just does nothing?

[@JOP-RC]

nice video!! good~~

[@KobtsevRC]

Thanks for the visit. Glad see you here. See you soon.

[@htechcustom]

cool friend! 😁

[@KobtsevRC]

Thanks for the visit

[@user-yq5dm5gq2q]

I have the factory xl5 esc and take power for the lights and winch. If a change to this combo how I will get power for this two? Thanks

[@wrc_adventurehobby5242]

Nice👍👍

[@KobtsevRC]

Thanks so much for watching and support

[@Glenn.J]

Awesome video. Can I get that front bumper with those Leds pre-installed? If yes can you share a link?

[@KobtsevRC]

Many thanks! Yes you can. amzn.to/3GswgXG you can watch here how im add this kzbin.info/www/bejne/kGnbdGmdm92bp9k

[@fazlysaihin3276]

Nice

[@KobtsevRC]

Thanks much! See you in next video.

[@nomoacidburn2185]

Really like the video thinking of getting the same motor but where can I get that little program thing and card you used

[@KobtsevRC]

Thank you very much for your support!

[@KobtsevRC]

s.click.aliexpress.com/e/_DDKaK05

[@KobtsevRC]

s.click.aliexpress.com/e/_DEkdPxn

[@The_regular]

What is that bumper and skid plate?

[@MrCADU267]

I noticed the chassis seems to be much more robust than the Redcat.

[@sweetsnoopy1212]

Let me know how to set it up,thank you very much for sharing.

[@KobtsevRC]

Check it kzbin.info/www/bejne/rn6zqKeEZbF3fsk

[@shamvideo]

интересно с аутраннером сравнить

[@Fre2dy]

Yo bro, always so cool your raptor broncos! Nice new engine, I think I will use it later!! Today was the first run with my TRX4 bronco silver!! My Raptor H-tech parts are starting to arrive!! I invite you to come watch my latest video on the bronco and give me your opinion!! Thanks in advance! Strength to you and your loved ones

[@KobtsevRC]

Thank you very much for your support and comment

[@GULIVERSOFFROAD]

a little marine grease goes a long way

[@wolfbanger2124]

Gotta comment again on how super imressed i am with this combo. may never go to another setup.

[@TKim103]

you really need to upgrade your screws to stainless steel so you don't have rusty hardware anymore and strip more screws.

[@KobtsevRC]

Yes, I will do it very soon, when I completely change all the gears.

[@robertsalazar2212]

Bro get stainless steel screws lol

[@Fre2dy]

Yo bro, c'est la galère en ce moment en ukraine!!! Look ma derniere vidéo! Bronco Vélociraptore 500 , custom HENNESSY!! Force a toi et tes proches. COURAGE

[@KobtsevRC]

Yes, war is bad! Many friends and relatives are now at war. The best people are dying! It's scary, but no one will give up!

[@Fre2dy]

@@KobtsevRC Yes, I often think of you with this fucking war.... Great strength to you and your loved ones! peace and love

[@KobtsevRC]

thanks!