Fusion 360 exile here. Thanks for the useful intro.
@TimmaethBoy3 жыл бұрын
7 dislikes from Autodesk representatives. Thanks for the quick how-to video Brodie.
@lewiscobb78173 жыл бұрын
Another Fusion 360 refugee here - sub'd and waiting for LOTS of content on FreeCad ! Thanks !!!
@carlosmanuel59923 жыл бұрын
search joko engineering freecad
@blendarious3 жыл бұрын
I wished FreeCAD would be as professional as Blender is, but in the current state it does kinda everything, but nothing really good. For playing and wasting time it is perfect, but it is miles away from getting even close to products like Inventor, NX or Solidworks. It really needs active development supported by a open source company and new versions every month!
@BrodieFairhall3 жыл бұрын
Blender wasn't always that way, not too long ago people would turn their nose up at Blender for being terrible, hard to use etc but a slowly increasing loyal community, donors and contributors made it grow and improve and the 2.8 release was in incredible milestone. KiCAD has a very similar story, FreeCAD could too.
@blendarious3 жыл бұрын
@@BrodieFairhall I mean I used Blender excessively back in 2013 and it was amazing. The experience was far better than using FreeCAD in 2020.
@BrodieFairhall3 жыл бұрын
@@blendarious That's really cool that you stuck with it all the way back then, 2013 Brodie would not have agreed with you at all, I personally struggled to find logic in how it worked and good tutorials online at that time, so I didn't put the effort into it and give it a decent chance back then.
@dunkeroni3 жыл бұрын
For anyone new to CAD design, don't be fooled: The Hole tool is very useful. The hole tool allows you to define a hole with a radius, counterbore/countersink, and optional tapered point at the bottom. The software will then create a revolved cut with the defined profile shape. This can be later edited as a single feature with a single defined center point, which will reduce the number of sketches and features that you might mess up. Additionally, if you are designing something to be machined from a solid material, properly modeling the taper from the end of the drill bit is important. It allows you to correctly analyze the model, and the machinist doesn't have to call you up and ask how deep the hole should be because flat bottom holes can't be drilled. This is less critical for 3D printing applications, but the ability to create more complex hole geometry in less steps is still helpful.
@Entaran3 жыл бұрын
I mean, you can drill a flat bottomed hole with an annular cutter or an endmill. But it's not optimal.
@jeffk4123 жыл бұрын
Heartily agree...
@chas18783 жыл бұрын
You can definitely drill flat bottom holes. It's just not practical as the need for a specific drill would add to the cost unnecessarily unless you really need it flat for some reason.
@transatlant1c3 жыл бұрын
I agree, this was a somewhat odd recommendation by Brodie. I use the hole tool as I find the workflow of having all properties as a single feature to be easier to manage, but then again I don't do any professional work, only things for home use so perhaps my use-case is different.
@paulvorderegger15223 жыл бұрын
Now with FreeCAD 0.20 you can even make holes with real threads for screws with different standarts like M1, M2... or custom ones. kzbin.info/www/bejne/nonOf6SpdrmKmdU It will be out soon.
@BM-jy6cb3 жыл бұрын
Fusion are really going to regret their recent move to restrict hobby use. In 5 years time with an army of freeCAD users starting their own businesses, not many are going to want to start shelling out $$$ and embark on a learning curve to switch to Fusion.
@juliusvalentinas3 жыл бұрын
Sure they just pirate inventor an be done with it.
@forrestgumpv90493 жыл бұрын
Fusion 360 is unusable for me anymore, so i'm just an X hobbyist user now. Giving Freecad a try now.
@theR69693 жыл бұрын
I started learning and using Fusion 360 couple of months ago after getting a bit frustrated with FreeCad, and I was considering paying for subscription when I got better with Fusion 360. But the stunt AutoCad pulled opened my eyes to the fact that I will always be at the mercy of Autocad and they can change the terms any time they like and there's nothing I can do about it. So I am back to learning FreeCad where no one can dictate what I can or can't do, and I will be donating to the project whatever I can when I can.
@124kpr3 жыл бұрын
I’ve reached the max of my editable documents ( only 30) on Fusion 360 and now can’t save new designs , time to move to Freecad , many thanks for a great Tutorial.
@einsteinx23 жыл бұрын
This is exactly the video I was searching for! The new license changes prompted me to look for alternatives to Fusion 360, plus I realized it won’t run natively on the Linux workstation I’m building next year. I’m still pretty new to CAD in general so I figured better to switch now than later, but all my experience so far is with Fusion so I was looking for a tutorial just like this to get a jump start on switching. Thanks for taking the time to make this!
@BrodieFairhall3 жыл бұрын
Glad I could help! Let me know if you get stuck on anything in particular.
@italogarcia15973 жыл бұрын
Freecad trava muito
@saritshull39099 ай бұрын
Same reason I'm here. I always hated fusion since I learned solidworks first. And their price changes and reducing features has only made me hate it more.
@Daekar33 жыл бұрын
Love your narrative style. I'm using FreeCAD for 3D printing and look forward to more guides.
@curtismarcus57593 жыл бұрын
Instablaster.
@manukrafter85063 жыл бұрын
I'm here seeking asylum from the autodesk oppressors.
@BrodieFairhall3 жыл бұрын
Welcome aboard!
@kylequinn19633 жыл бұрын
Disappointing that they added even more restrictions to Fusion360 free version. I understand why, but it still blows.
@tomuhr58023 жыл бұрын
Nothing changed for you guys. If you use Fusion 360 above the level they restricted, you’re not using it as a hobbyist. The level of functionality that the free F360 version provides, even after the restrictions, is mind blowing. You’re certainly free to go with open source, just don’t expect the same functionality and speed of modeling.
@BrodieFairhall3 жыл бұрын
@@tomuhr5802I think you're underestimating quite a number of hobbyists here, lots of non commercial users were using a lot of functionality that has been removed from Fusion. Also think about the number of open source projects that have been effected by this, both the 3D side and because Adsk rolled Eagle into Fusion. After using Fusion for 5 years, I'm amazed that Adsk actually think it is ready to charge people money for at all.
@tomuhr58023 жыл бұрын
@@BrodieFairhall No. I was quite clear in what I was saying. But sure, humor yourself. Since you clearly think that software on this level should be for free, what I would consider rather delusional, FreeCad is ideal for you. While we, that actually use these different CAD platforms for work, consider Fusion 360 the most cost efficient software on the market. And look nothing against open source, there’s a lot of amazing stuff out there, but please stop the whining on what you should get for free.
@leeo.alexander23243 жыл бұрын
I have been using FCad v0.18 for about two solid months now. I am nowhere experienced in CAD generally, but I have become very comfortable in using FCad. The only real issue I have now is learning how to get text on my objects. It works sometime and getting the orientation of my text is a little troubling. But I am quite satisfied with its performance and the current tools it has. I still have a lot to learn. Its is an enjoyable application with a nice CAD community involved. Thanks for your input on this application.
@DWatso3 жыл бұрын
The trim tool was a revelation - thank you sir!
@ruiloureiro32143 жыл бұрын
FreeCAD it's an astonishing achievement
@Alasdair-Morrison3 жыл бұрын
I believe the days of over priced sub based app's are nearly over F360, Adobe and the other exorbitant priced app's are just not worth using anymore.
@thedarkpill35903 жыл бұрын
Nah, as long as big companies are shelling out the money for Creo, Catia, Autocad, they have no incentive to drop the price
@FranzStrasse3 жыл бұрын
Exactly what I was looking for. I've been using FreeCAD for years as a viewer but have never had any idea where to start with designing. I have used F360 a few times to design little things for 3D printing but the hobbyist licence keeps eroding. With this, I can make the leap I needed to make. Thanks!
@brucewilliams62923 жыл бұрын
Thank you so much for the "Highlight open vertexes " button! That has been a big frustration.
@BrodieFairhall3 жыл бұрын
That was a massive frustration for me too when I was starting out, that's why I made sure I put it in the video!
@tcaleshu3 жыл бұрын
Would be keen to see a section on a key part of my Fusion workflow - jumping back and forth in the timeline and making edits. Not just revising a sketch, but reorganizing the order of things (eg move a fillet command to later in the timeline) or deleting an extrude (pad) operation. Oh and appreciate the moderate pace and even voice over of the video :)
@markopesevski3 жыл бұрын
^ this. Give this person a cookie. Also a newb to FreeCAD coming from Fusion 360. It's been quite a smooth sail upto the moment but a few things like this keep me missing Fusion.
@BrianVanderbusch3 жыл бұрын
Small tip: when you change settings like you did at the beginning, please do things like that a bit slower, and make sure to do things in the order you say. (You said change the gradient and add anti-aliasing, but you did those things in the order of adding anti-aliasing and then changing to a solid color background.) Great video, thanks for publishing this one!
@bullzebub3 жыл бұрын
Well.. they was cosmetic changes so its not that important. Why not play around yourself? 😀
@BrianVanderbusch3 жыл бұрын
@@bullzebub I was trying to give you a tip, not asking a question about how to do something. You also way underestimate the power of cosmetic changes. Most people in the free-to-use market who shy away from FreeCAD do so because of cosmetics.
@darrenvoong90133 жыл бұрын
I started fusion last year and with all their shenanigans and my trial ending, I’m exporting my projects and switching to free cad. This video is godsend
@BrodieFairhall3 жыл бұрын
No better time than now, FreeCAD is only going to get better for this point on.
@thefoosel3 жыл бұрын
Awesome stuff, thank you! Would love to see an Assembly! Also during the weekend I've now several times come across the recommendation to NOT sketch directly on a face but rather create a datum plane and use that instead, to work around some error that's currently still in FreeCAD. I'd love if you could go into that, maybe with a demonstration of said error so one knows what one wants to avoid. Right now it's all still a bit of a mystery 😅
@kurtkremitzki15583 жыл бұрын
That is called the wiki.freecadweb.org/Topological_naming_problem and it results in problems down the road, when you have to recompute the model, such as when changing a parameter. Attaching a sketch to a face makes a relationship based on the numbering of the entity, e.g. Face01. So if that face was the result of some operation, like a Pad, and you recompute your model, but your faces come out with a different numbering, e.g. Face01 is no longer "the top face", then your model will break.
@BrodieFairhall3 жыл бұрын
@@kurtkremitzki1558 Absolutely right! Fusion actually suffers from the same problem too, but less people encounter it I guess. I can definitely show an example of the error in a video too, I have done it to myself a lot.
@thefoosel3 жыл бұрын
@@kurtkremitzki1558 Thank you very much! I really need to do some reading on the wiki it seems. That node just did wonders to my understanding.
@4funrc113 жыл бұрын
@@BrodieFairhall That'd be a great video. 👍 TiA 😃
@MichaelKJohnson3 жыл бұрын
I'm looking forward to realthunder's topological naming fixes making it into mainline FreeCAD. I think the advice on how to use datum planes I've read hasn't been consistent. I'm still new, but I get the idea that the best approach is to have the datum planes drive both the surfaces and the sketches that would be on those surfaces? But realthunder's work should usually make that a boondoggle I think. I've gotten used to SolidWorks getting topological naming mostly right, but I've still seem models fall apart topologically there and realthunder's naming scheme looks even more robust. I crashed his build before managing to induce a topological naming error when I tried yesterday. 🙂
@waynemenzie70153 жыл бұрын
I laughed out loud when you said that hole is something you'll probably never use because that's a specific software feature I'm looking for. In Fusion 360 it's great for easily modeling printable threads and countersunk fasteners.
@stephenobrien11833 жыл бұрын
In FC there is an add-on which allows for the creation of scaled threads specifically for 3D printing, the fasteners WB.
@vladimirseven7773 жыл бұрын
Just like "you will never use the grid". Something in the middle of nowhere looks great. I guess they tried to create software not for designers but for kids.
@stephenobrien11833 жыл бұрын
@@vladimirseven777 Sketcher is a constraints driven application, for noobs using the grid can give the impression that lines/curves are connected because the endpoints start/finish at the same place. This is not the same as being constrained together. That is why a lot of people never use the grid. It just isn't much help.
@Sarwiz13 жыл бұрын
I dont use the grid in 360, so would not use it here. Been playing with freecad for a few weeks now, but still use 360 on a regilar basis for modelling.
@t5sblanco3 жыл бұрын
Ditto the comments about the hole feature - it's extremely useful when ultimately moving to engineering prints. If all one is doing is FDM/SLA printing, probably less so, though the standard c'sink and c'bore features are good to if you want to print them - get them sized right. Though I was just messing with it in 0.19.22665 (current as of this is 22670) and the hole feature is broken in it. Working fine in 0.18. So one's mileage may vary with the development build rather than the stable branch.
@jeffk4123 жыл бұрын
You did a fantastic and I mean fantastic job of explaining things. You are a either a natural at this or you have instructed before. In a short time you gave clear information on how Freecad works including things to watch out for! Really hope you do more! Cheers!
@fkdump Жыл бұрын
Thanks for not making an hour long video, great and short, straight to the point.
@timothystark44753 жыл бұрын
Subscribed! I am happy to see tutorial video with subtitles (must required for deaf/foreign community). I was going to use Fusion 360 and learned license policy was recently changed. I finally switch to FreeCAD and Blender that I recently installed. I hope that developers catch up like insanely expensive commercial CAD applications (AutoCAD, SolidWorks, etc.)
@wpegley3 жыл бұрын
Thats should be available via KZbin Subtitles button, Id love to see a translated subtitles from all the other language's in the world
@bluephreakr3 жыл бұрын
The best part about the F360 plan restructuring is all of the programming talent also into CAD who will iterate upon FreeCAD and OpenSCAD.
@RiccBallard3 жыл бұрын
Yes please continue with FreeCAD tuts. Would like a video on G-code creation and possible a simulation starter.
@forrestgumpv90493 жыл бұрын
I second this request !!
@N900ADM3 жыл бұрын
Thank you Brodie. I am a intermediate F360 user mostly for 3d printing and paper templates for cutting materials. I don't spend enough time per year on F360 to warrant a massive yearly subscription. Your video is also exactly what I need and coming in at the first video means I can learn at a pace rather than wading through loads of videos trying to catch up. I'm still not convinced FreeCad is what I need but you have prevented a premature binning of the software. I look forward to your next instalment. Aiden
@makersonaboat3 жыл бұрын
This introduction was just what I needed to get started! Thank you for creating this video!
@chaddanylak87063 жыл бұрын
freecad will become like blender now
@yosyp59053 жыл бұрын
Freecad doesn't have the support Blender has. let's hope that they'll improve the software, I'm looking forward to migrate.
@yosyp59053 жыл бұрын
@YS TR very bad news. It makes me want to complete computer engineering just to help with the software myself lol
@peterjansen48943 жыл бұрын
@YS TR not true at all. Why so negative? The realthunder branch is nearly perfect.
@peterjansen48943 жыл бұрын
@@yosyp5905 do your own research, ys tr is negative and has clearly no clue of the current development of freecad.
@yosyp59053 жыл бұрын
@@peterjansen4894 who's YSTR? can you explain more?
@peterharris30963 жыл бұрын
From an engineering designers standpoint this seems much intuitive in creating parts. Thanks.
@lauriehartley98083 жыл бұрын
Peter - look at Bugman’s FreeCAD channel - kzbin.info/www/bejne/eZzUinqNoNR9h68
@willemkossen3 жыл бұрын
I am just starting 3d design. This stuff is pretty hard. Thanks for explaining it well
@richardwilliams34083 жыл бұрын
Thanks Brodie!! You are Just the guy we need to get us going in Freecad
@jothain3 жыл бұрын
I know how to use Fusion quite well and have some very basic skills on FC. This was very good video. I haven't known about that missing vertex option and have bit struggled with boolean operations. This immediately explained what I've been likely doing wrong in couple occasions. Very good job 👍👍
@simpernchong3 жыл бұрын
As a Rhino 3D User, this free CAD video tutorial is very useful for me. Thanks. Subbed.
@andy.puempel3 жыл бұрын
Nice Introduction Video, Brodie. I like your methodical tutorial approach. Nicely done.
@tomfenn71493 жыл бұрын
I just wanted to chime in and add that the sketch function in FreeCAD is in fact very similar to that in Solidworks (I trained in Solidworks as part of my engineering degree). I think we all got a bit spoilt by how A360 sketches. A360 sketching is really nice, while Solidworks/FreeCAD being a little more 'clunky', but it still works and works well.
@3d-explorer3 жыл бұрын
Thanks for this video! I appreciate your concise comparisons and demonstrations of basic operations and also pointing out "gotcha"s. The hint about the pocket tool, for example, being unable to cut a body in two is very helpful.
@ameliabuns40583 жыл бұрын
Oh i just realized I'm not subbed :O Great tutorial thanks :3 I created my first part in this for my project now :D it was simple and hard to do when you're used to fusion but I already feel better at it! also I'm really happy there's a tutorial for someone who already knows CAD fundamentals but is transitioning!
@BrodieFairhall3 жыл бұрын
It's hard to unlearn habits, it took me a long time to grasp FreeCAD, but now I couldn't imagine going back to a closed source CAD suite, especially an Autodesk tool.
@ShandonCodes3 жыл бұрын
This series is helping me so much with designs for projects on my channel. Thank you so much for taking the time to make these videos!!!
@ramtek27023 жыл бұрын
I've been using Solidworks for nearly 20 years so I would like to see some comparisons to SW. I still have a valid SW license and would be happy to contribute in any way possible to further the open source progress of FreeCad.
@vorupan3 жыл бұрын
Search for Joko Engineering Freecad Solidworks. He did a nice video on FreeCAD from a Solidworks Users Perspective
@TooManyProjectsWorkshop3 жыл бұрын
Seems to me that FreeCad is a lot more similar to solidworks than it is to fusion - for example the differentiation between additive and subtractive tools is very similar to Solidworks.
@ramtek27023 жыл бұрын
@@TooManyProjectsWorkshop I was thinking the same but I've only watched one video so far.
@philliptoone3 жыл бұрын
I learned Solidworks in 2000 and have been using it until 2017 when I discovered OnShape. I've dabbled with FreeCAD for years but never become proficient.
@Beerbatter19623 жыл бұрын
@@TooManyProjectsWorkshop Agreed. In many other ways. I don't know if SolidWorks still has these limitations currently because I haven't used it in a while but back in the day when I did, you also couldn't have open sketches, and you couldn't split bodies. Additionally, the sketch is absorbed into the body, where in fusion you can use sketches over and over again.
@nightfighter783 жыл бұрын
Nice and useful video, thank you ! I will link this to my friends who are interested in FreeCAD.
@drbytes683 жыл бұрын
I like Freecad alot. I have however stumbled upon Siemens Solid Edge and that thing is a local install with local storage. Definitely a solid 360 contender
@BrodieFairhall3 жыл бұрын
Solid Edge and Solidworks both seem to be nudging in to the space Autodesk opened up with their recent stunt. It's great to see some kind of community support coming from Siemens and Dassault Systems, it's also a smart move for a company to get people familiar with their tools so that is the one they want to buy if they do any commercial work. There is always still that risk that they will change their licensing. FreeCAD might be lacking a bit of polish right now, but, it is still a fantastic tool and if the community gets behind it, it will grow and they'll have a tool that no one can take away from them. Blender and KiCAD are excellent examples of this.
@LT728843 жыл бұрын
So a while back, 2 years ago, i did my cswp solidworks certification. But since that is super expensive haha, i am looking into freecad. I would like to take all the examples from my book and course, then recreate them in freecad. Thanks for the video
@qasthor3 жыл бұрын
Excelente explicación, gracias por mostrar y apoyar a Freecad. Saludos desde Chile.
@supercurioTube3 жыл бұрын
Super good intro! I've been learning FreeCAD for about a week and didn't come across everything you showed here earlier, like: - trim tool - validating sketch Since I got started with 3D modeling only now I can start directly on FreeCAD instead of being tempted by Fusion360 and likely migrate from later 😁 This unclear "10 active documents limit" might get quite the annoyance on their free plan.
@BertNielson3 жыл бұрын
Very timely information for me. I'm looking to start a small business that leverages some 3D modeling. As a result I've been debating the paid or start-up license of 360, because I was overwhelmed trying to understand freecad. Subscribed so that I can learn more!
@Festivejelly3 жыл бұрын
This will be valuable to a lot of people including myself. Thanks for taking the time to do this.
@alicedad61713 жыл бұрын
Subbed and Belled. Would be lovely to see "Beginner" "Intermediet" and "Advance" user tutorials. There are a couple of beginner videos out there but I think if you made a complete series from beginner to advanced you would gain alot of subs and many people would benefit from it. Looking forward to see lot's and lot's of videos from you!
@RuudK.3 жыл бұрын
AliceDad I second that 👍
@everydaygear37303 жыл бұрын
I had a fusion 360 tutorial series up, on how to make folding knives up over a year ago, 20 videos. I left them up for a month - tons of views, little to no likes on videos, very little comments, no patreon support (not even a dollar a month) and only 5 subscribbers. Honestly, I think it's about the teacher - this guy's channel would do GREAT with tutorials, people like me just don't mesh well with the majority or don't know how to teach others their skills - so now I just make time lapse videos of my designs. Subbed, and looking to move over from fusion 360.
@lauriehartley98083 жыл бұрын
Please note at 3:40 - when the sketch turns green it is “fully defined” - i.e. zero degrees of freedom. This is very important.
@hughcowart20493 жыл бұрын
Just ran through this and the other FreeCAD videos you have. Easily the best I have found so far. Subbed and liked, and considering bumping a current patreon cause to contribute to yours if these continue. Promise of this project is high... but good lord does it need some helping hands to climb the curve of that interface and the work flows.
@BrodieFairhall3 жыл бұрын
Thanks! Let me know if there are any particular topics you want covered.
@nilocray3 жыл бұрын
Great video, i had almost given up on free cad but in an effort to ditch windows 10 for liunx fusion360 is not a real option. However your vids have given me a good feeling about the move. Now just need to export all my projects. Keep up the good work.
@macdroid533 жыл бұрын
This video is very nicely done. Great info on the similarities and tips on how fusion360 users can find comfortable ways of doing things in FreeCAD. But, it immediately teaches techniques that, while very convenient, wiill almost guarantee the new user will quickly face the topological naming issue. Especially when encouraging the user that sketches can be changed at any time. While ture, there are caveats. Teaching/explaining how to use sketches attached to base planes with offsets, and other techniques, while less convenient, can avoid confusion and frustration. New users have enough to cope with transitioning from Fusion360, no sense adding to the frustration.
@BrodieFairhall3 жыл бұрын
Absolutely right, I'm doing a few more videos this week and one is specifically going to be about the topological naming problem, how to cause it, how to fix it and ultimately how to do it properly. Most people who try FreeCAD, unfortunately drop it after 15 minutes of trying to get anything accomplished, so I just wanted to get people feeling like they can actually create something before dropping the big problems on them, especially when Fusion lets you get away with so many lazy things.
@macdroid533 жыл бұрын
Yea, I see the "15 minute" tolerance all the time. I did a series of written tutorials that, I thought, tried to present the "learn to stand, before you attempt a marathon" and the response was a room full of crickets. ;) And, yes, Fusion does allow one to get lazy. ;)
@deeeeeds3 жыл бұрын
I hope you keep these up! Even just basic videos showing how to design various parts in FreeCAD would be awesome. I'd also love if you could show off some basics of assemblies. I love the joints in Fusion and how intractable they are and have yet to find something in FreeCAD that compares.
@dennisdecoene3 жыл бұрын
YEP!!! I'm switching!!! Thanks for this it was exactly what I was looking for.
@JesterOTL3 жыл бұрын
Thanks, Brodie! This video helped me with a couple of FreeCAD features I was struggling with. Very much appreciate the video!
@rmtz74883 жыл бұрын
Subscribed. What I'd really want to know more about is how to deal with 3d sketching, more specifically on non orthogonal planes and for scaffolding purposes. Thinking of situations where you know a few parameters and need to use the sketch as a construct to find the actual measurements of your parts.
@BrodieFairhall3 жыл бұрын
I'm sorry, I want to make sure I get what you're asking correct. Do you have a simple example you could point me at?
@rmtz74883 жыл бұрын
@@BrodieFairhall Currently in Fusion, I use 3d sketching to model complex concave shapes on multiple construction planes that are not the origin planes. Those scaffold construction sketches are parametrized by measurements that are NOT the final part dimensions, basically their job is to actually compute where the part should go and how to bend the shape to conform to that. Sorry I know this sound confusing. If I had to think of a concrete example that more people could understand it would be something like this: You have to design an aftermarket car bumper, you only know the location of the fastening points and of the chassis bounds, these are not located on any single 2d plane, and you have to generate a shape that surrounds them with and matches the fastening locations. I hope that makes some sense, if not don't worry too much, I'll end up figuring it out somehow.
@howardosborne86473 жыл бұрын
The errors with non closed sketches reminds me very much of working with older versions of Solid works.You really had to look very closely to spot the error sometimes. I've just subscribed,this looks like it could get very interesting👍
@Hotwire_RCTrix3 жыл бұрын
Really excellent tutorial and likewise with all the other videos on FreeCAD I have seen of yours. Thank you!
@robles19993 жыл бұрын
Great tutorials. FC isn't easy to learn. I've used Rhino and Fusion360 and FC is by far the most complicated and non-intuitive. I hope the developers look into simplifying the process like in DesignSpark Mechanical and Space Claim. I am currently using DesignSpark Mechanical (which is a free version of Space Claim and has been for many years without any of the SolidWorks licensing games) and I can believe how intuitive it is and how brilliant the toolset is. I was actually up and running creating complex parts (a guitar necks and bodies) within a couple of hours after viewing a few KZbin videos. FC developers should take a close look at DesignSpark Mechanical or Space Claim toolsets to get ideas for simplifying the FC interface. The Pull, Combine and move tools are so powerful and such a pleasure to work with. Please FC take a look at DesignSpark. Thanks Brodie for you time and efforts on helping us understand FC better.
@BrodieFairhall3 жыл бұрын
Thanks! DSM is very nice and simple to pick up and work with for sure, but lacks the non destructive workflow that most cad suites have (like rhino, fusion, FreeCAD, Solidworks etc.) along with a whole lot of other features. FreeCAD is primarily developed by about 4 people as a hobby outside of their day jobs, I'm sure they'd love to be able to make it more intuitive and easy to pick up but FreeCAD needs more contributors, donations and users in general to help that happen. If you want to see what is potentially coming to FreeCAD soon, you could look at RealThunder's Link Stage 3 branch on GitHub, there are some significant UI/UX and QoL developments going on there that you may be very interested in. As for DSM, Ansys or RS could turn around any minute and change the free licence, just like RS have done in the past with Designs Park PCB, which is why I'd rather invest my time and donate to FreeCAD.
@mattlennon33 жыл бұрын
Really great video, so many little tips to pick up. I was trying freecad for the first time tonight and I had struggled without knowing how to align to the grid/edges, I know now! The UI also looks much better with your suggestions! The other thing I was struggling with was camera control, the cube in the top right can't be dragged like in fusion and the camera itself seemed to stay in rotation mode until I let go of shift. Maybe a video on that would be good :)
@BrodieFairhall3 жыл бұрын
Instead of "Shift + Right Mouse Button" to rotate, you can also use "Middle Mouse Button + Right Mouse Button" (Which I always forget doesn't exist in Fusion every time I use it)
@andrewdonald27703 жыл бұрын
Brodie, thank you for this video. I will seriously consider making the shift fro F360.
@ctempleton33 жыл бұрын
I am a SolidWorks CATIA user on a daily basis at work. This would be nice for home projects.
@polin19623 жыл бұрын
That's brilliant, extremely useful initiative, well explained and to the point !! thanks a lot for this
@powil4ss3 жыл бұрын
FreeCAD is awesome. Maybe there are few bugs but in my job we use FreeCAD to make all designs for manufacturing and using Path module to setup CAM.
@JavierChiappa3 жыл бұрын
In a way, this Fusion360 shitstorm is a blessing for FreeCAD, i did a lot of training in Siemens SolidEdge, just to be wasted time, so i learned and NEVER EVER waste time again learning how to use a closed source tool. Fuck Autodesk and guys, learn your lesson here. Thanks for the tips at the end!!
@harryt6223 жыл бұрын
I used F360 as a hobbiest for years, then it all went to hell. I have been looking for something for my 3D printer designs. I’ll try this right away.
@pa12973 жыл бұрын
How did it go? Easier?
@theredstonehive3 жыл бұрын
Coming from Fusion 360 making stuff in FreeCAD is quite a bit more tedious, I really hope it can get more attention and support.
@BrodieFairhall3 жыл бұрын
They're just entirely different workflows. FreeCAD takes a bit of time to get used to, but I am just as fast in FreeCAD as I was in Fusion360 and Inventor.
@justinmargason72613 жыл бұрын
Thanks for the video! Looking forward to more fusion to freecad vids
@vincepugliese9113 жыл бұрын
Outstanding and very timely. Please, keep producing these videos as there is keen interest at this time for this content. Thanks, .vp
@warperone3 жыл бұрын
nice, clear, slow explanations ..... pls keep making such video on freecad. One note though- your theme color screen make it hard to see text and icons on youtube....I think the default is clearer when streaming on youtube
@notsonominal3 жыл бұрын
Nice timing..! Hope to see threads in a future video
@cekuhnen3 жыл бұрын
I guess it really comes down to what you need. Sofar it seems to me that for mechanical solid modeling FreeCAD delivers very well. But for product design where you work more with surfaces, blend curves etc it quickly shows missing tools. RealThunder is a pretty god sent for FreeCAD to catch up.
@BrodieFairhall3 жыл бұрын
You should really check out the curves add-on, OCCT has incredible surface modelling power and this workbench really makes it accessible. kzbin.info/www/bejne/n4bLeZqkq8yjpZI
@cekuhnen3 жыл бұрын
@@BrodieFairhall I did watch and follow it - when I bring the STEP export into Fusion it shows many tangency issues. I might have to investigate more.
@Brunmed3 жыл бұрын
This came up just great! I'm starting my migration with help from your videos for sure :)
@Mtaalas3 жыл бұрын
FreeCAD needs some UI overhaul... the huge number of small icons isn't really good for user experience. Everyone hated Ribbon UI when it was introduced, but in hindsight Ribbon helps with the clutter and legibility way more than people realize. Something similar to FreeCAD woudl be great. Especially when the resolutions of the screens are increasing rapidly, small 16x16 icons are just the evil. Having multiple tabs for different type of editing is also good in reducing clutter. And CAM integration would be almost essential these days. It's not in the style of linux-type software to integrate anything but one thing in a program, but frankly, manufacturing and designing are so integrated that I hope they'll add CAM facilities as well that can update when the model updates :)
@BrodieFairhall3 жыл бұрын
You can change the Icon size in the preferences menu, the dropdown is just under the one theme selection one. There is a Ribbon UI add-on github.com/HakanSeven12/Modern-UI FreeCAD does have CAM integration
@kippie803 жыл бұрын
Yay! Thanks much!! I absolutely refuse to use Fusion 360. Turned away from AutoCad at R17 and never want to look back. Sketchup Pro V8 has been my home since then (later Sketchups have less features). Curves are terrible in Sketchup for STL file creation though so, gonna check this out. Thanks again!
@davidtaylor68702 жыл бұрын
Great video, thanks. Had been using Fusion for a little while, but as it is cloud based, and my connection speed is not so great (retired, and no money) I decided to use FreeCAd. What this did highlight was, my 3D modelling skill. None. I do get confused with bodies, and multiple bodies in the same project, and the relationship when I use, say the sweep tool. FreeCAd is somewhat more bare bones than Fusion, but it is where I am now, for the speed. If you have the time, a lesson on the what is the 'tree' and the rules that would apply to bodies, and how bodies work in the project. regards, David
@BrodieFairhall2 жыл бұрын
Hi David, thank you for the feedback on both of my videos! I am planning to do some more FreeCAD videos shortly, but in the mean time I'd suggest checking out videos from FreeCAD Academy / Flowies corner (same person, but they have an English and a German channel), Andrew CAD (has great explanations of each individual tool on detail), Joko Engineering and Math Code Print. If you have any issues, let me know. Good luck!
@rondlh203 жыл бұрын
Exactly what I was looking for...thanks!
@madk4speed Жыл бұрын
Fusion 360 seems to be one of the easiest pieces of SW to learn CAD. I made a start with DesignSpark Mechanical, then tried Fusion. Not an expert user but I do feel comfortable using it. My initial attempt with FreeCad was similar to using Solidworks 2013. It feels much more difficult, and was somewhat dissapointed. Willing to try more with FreeCad mainly because it's available for my work laptop, as a 3D Experience licence for designing stuff cannot be justified yet. And I do need occasionally to design something for work. If it wasn't for the cloud based feature of Fusion 360 I would already consider buying a proper licence. Anyway good video.
@TheDaveOutlaw3 жыл бұрын
Thank you Brodie . I like how you explained things to get started . I have been fusion 360 for the last year between changing the user terrace to the recent changes in the free liscense fusion has alienated some of those I am mentoring . I still subscribe to the fusion 360 as there are more training videos like yours in fusion 360 than free cad . As just a comment I liked how you took the time to make the display the same .it took me several tries as it was don3 very quickly and there may be som3 difference between the apple an windows menu options . In apple the preferences tab was located in the free cad icon not the edit drop down menu. I am going to create a video today for my student using your model in a zoom meeting . The newbies have a lot to learn and the video is a little too fast for them but was perfect for me . So I am creating one that is for beginners I can send to you if you would like to see it . I know you are busy and I really appreciate your time . Do you have a Patron account ? Kind regards Dave Outlaw
@BrodieFairhall3 жыл бұрын
Hi David, I apologise it has taken me so long to reply. Thanks for the heads up on the Apple menus being different, I'll try an include any differences like this in future videos. It's great to have feedback about the pace of the video, both of my Fusion to FreeCAD videos are targeting people with an understanding of 3D CAD and want a quick overview of the tools and layout, but I probably should make them a little more beginner friendly. I'll be focusing more on videos covering single concepts or tools which will be short but hopefully a good pace to keep everyone interested but not leave beginners behind. I would love to see your tutorial, as you mentioned, FreeCAD is seriously lacking educational material when compared to Fusion, so the more tutorials available, the better. I have recently made my Patreon public (www.patreon.com/makeor), I'll be adding more to it soon. Also, thanks for taking the time to comment! Kind regards, Brodie
@joebywan3 жыл бұрын
I'd love to see a video on loading reference into freecad and modelling from it? It's something I do quite often in F360, and I'm definitely considering the switch after this latest nerf of the free licence.
@BrodieFairhall3 жыл бұрын
As in loading a scan/mesh as a reference?
@joebywan3 жыл бұрын
@@BrodieFairhall In fusion I regularly load reference images in, then calibrate them with a scale & model over them to make something in fusion. Does freecad allow that?
@BrodieFairhall3 жыл бұрын
Ah, I understand now, you can definitely do this in FreeCAD and it would make for a good little video :)
@1951split3 жыл бұрын
@@joebywan You mean something like this?: kzbin.info/www/bejne/gXLRhmd9gJJjn68
@MrInnovativeEnergy3 жыл бұрын
Fusion 360/Rhino 3d user. Thanks for the tutorial!
@The_Unobtainium3 жыл бұрын
Keep going with FreeCAD Brodie. Thank you. Subscribed.
@michaelnoardo33153 жыл бұрын
LEAVING FUSION TO BE FREE CAD ADEPT
@DennisCaunce2 жыл бұрын
Thanks for making this video.
@nickyoutu3 жыл бұрын
A significant difference seems to be in FreeCAD each sketch can only have one shape. In Fusion, I'm used to a sketch having many shapes, and then extruding those shapes to different heights, and even starting at different offsets. But it seems in FreeCAD, that's not the way. So many more sketches. Do I understand it right? (Edit: The first sketch can only have one shape, but sketches on the body later can have multiple so long as they don't overlap, but it seems they all get padded the same)
@BrodieFairhall3 жыл бұрын
Pretty much right, you can have multiple shapes in one sketch if there is one outer sketch and multiple inner sketches. But since pad works on the entire sketch/you can't pick what parts of a sketch to pad and ignore others and you can only have one solid within a body, you can't have multiple separate shapes within a sketch.
@alejandroperez53683 жыл бұрын
And that's one of the reasons why F360 is so attractive and easy to use. Everyone go use Freecad, I'll keep using the nice tools, all to myself muhahah
@ameliabuns40583 жыл бұрын
the trim tool didn't work on my circle D: it's such a bummer that I can't select surface of a sketch or parts of it to pad like fusion and solidworks. I hope they add that soon!
@BrodieFairhall3 жыл бұрын
The trim tool can be a bit finicky, it can do weird things depending on how your sketch is constrained. I don't use it 99% of the time. You could use the arc tool to create the part of the circle you need instead of making a circle and trimming it. As for being able to selectively pad (or use any other action on) parts of sketches, I doubt that will ever be in FreeCAD, as it's generally viewed as bad CAD practice. I learned why it's bad in Fusion when I started making a lot more customisable / highly parametric designs before I really understood why fully constraining sketches was so important, so I got a lot of topological problems and a lot of other weird geometry problems. It wont effect you in Fusion unless you are really doing a lot of parametric design, but as I learned FreeCAD I started applying what I learned to Fusion and it made me much, much better at Fusion. Oh also I remember you talking about wanting to project surfaces from imported parts etc. While I kinda advise against it in the long run, this video from Andrew CAD (kzbin.info/www/bejne/g3S8ZnyojNd7qLc) will introduce you to the shape binder tools which will let you do exactly that.
@heinoschiller45003 жыл бұрын
Great video! I work as a professional using CREO... and I am not happy with Fusion for my home applications. FreeCAD seems to be more like Creo than Fusion.... I will try it.
@diymotionsimulator37443 жыл бұрын
Really really good tutorial thank you Brodie.
@3DJapan3 жыл бұрын
I've actually never used either of them. For the small amount of CAD I do I use MoI. But the Fusion news made me look into FreeCad. I opened the program and didn't have the foggiest idea what to do. I couldn't even find any tools.
@BrodieFairhall3 жыл бұрын
This is exactly the reason I decided to make the video. It's not obvious where to start.
@jamesdonnelly88883 жыл бұрын
Wow, everything I heard about it was either outdated or wrong. Er, why do I need F360 now exactly?
@BrodieFairhall3 жыл бұрын
Yeah, most people who have an opinion on FreeCAD years ago, couldn't work out how to get started and base everything off that one outdated bad experience. Without direction, it isn't clear where to start in FreeCAD, but once you're up and going, you'll work out it's far better at some things than Fusion and not as good at others, just like comparing Fusion to Solidworks etc.
@foadsf3 жыл бұрын
It would be great to have more of you guys on FreeCAD Discord channel discord.gg/HrhnvnE
@benyyz3 жыл бұрын
FreeCAD is very promising. Though I wish it were more stable on Mac OS. It would be nice to ditch the PC that I only use for CAD work.
@rickseiden13 жыл бұрын
This is a great video (but your audio was off a little). I'm a 360 user, and I am thinking about FreeCAD now, but after this video, I don't think I will. Not being able to split an existing body into multiple parts is a big deal for me. If I have an enclosure I'm building with a hole cut out on the side and some mounting holes on the bottom, I'll cut that part out of the existing body, export it to STL, then undo the cutting out. That gives me a much smaller piece to print and verify the fit. Mostly it's time I'm concerned with. It might take an hour to print that section of the bottom and side, but four or five to print the whole thing. I use this method on almost every project I work on, because most of my projects are mounting various electronics in enclosures for my projects. I don't want to give this up. But I think there are tools out there that I can do this with anyway. Maybe even my slicer (PrusaSlicer) can do that. I'll have to look at that, because if my slicer can do it, it's not a big deal to not be able to do it in my CAD tool.
@rickseiden13 жыл бұрын
Turns out PrusaSlicer can cut models before printing. OK. I'm still in.
@BrodieFairhall3 жыл бұрын
There are a whole bunch of different ways you can do exactly what you mentioned in FreeCAD and almost in the same way you do in Fusion, but I could only for a small amount in this video. I'd definitely recommend checking out the development branch of FreeCAD RealThunder (one of the main Devs) is working on if multipart bodies is something you need, it's also a good look at what is the likely direction the software is moving in next. github.com/realthunder/FreeCAD_assembly3/releases
@zsigmondkara3 жыл бұрын
This is so cool! You helped me decide to do the jump!
@VorTex1083 жыл бұрын
Nice Video, even for me who didn't use Fusion. Can you show an assembly? Thanks!
@BrodieFairhall3 жыл бұрын
I plan to do a video on one of the assembly workbenches this week :)
@cdyoutoob3 жыл бұрын
Like to see all those UI tweeks you and others do just be a standard part of 0.19+. It does need wholesome redesign of some UI features. All the 'under the hood' stuff is pretty rock solid. Perhaps see what can be borrowed from Blender's UI
@BrodieFairhall3 жыл бұрын
There is a lot that can be done with the UI with Addons and RealThunder, one of the main dev's is doing a lot of UI work right now. This video shows a fair bit of it (very much a work in progress) kzbin.info/www/bejne/qWiyYZp_q72hgrc
@CadAxe3D3 жыл бұрын
Many thanks for this video. Keep going!
@Enderbro33003 жыл бұрын
Beautiful. Thank you so much for this
@diahrongrismore10543 жыл бұрын
Very good and informative video. Can you do a video on the 'grid system' setup. Thanks for the great videos!
@BrodieFairhall3 жыл бұрын
I'm not sure what you mean by the 'grid system'?
@diahrongrismore10543 жыл бұрын
When setting up your work environment you have the choice of using Metric or Imperial measurements. Question: If accepting the default settings (Metric), for your initial settings, can you use Imperial measurements in a drawing without modifying your default settings? I believe the answer will be in understanding how to manipulate and setup your grid environment settings. Which would probably be better implemented in a beginners tutorial.