This Might Be The Death Of Me!

Tell me about your project that started as a quick fix and turned into a two week or even two MONTH long ordeal. Unfortunately i'm not in a position to let this one just sit around until some other sucker buys it in 10 years after there are trees growing out of it. I HOPE to have this wraped up in the next week, but thats starting to look more and more like a wishful thought.
Let me know in the comments what content you want to see more of!
Check out my other platforms:
Instagram: / luke_mcfad
Facebook: / fvsoutherngirl
TikTok: / fvsoutherngirl

[@nervousnedmusic]

Luke, I don't envy your pain. I feel like you need to ask your 16.5K subscribers to sign up for a volunteer day and put us to work. I have no doubt you'd have a small army to help you renovate both boats.

[@LD-to4ft]

I would bring my boy down

[@fvsoutherngirl]

Hey not a bad idea!

[@feliciaslaughter4221]

I'd do it

[@yakityakteriw6774]

I'm a boater. I'd help but I'm in AZ

[@Mike-tc8ob]

Just finished turning an abandoned sailboat into a crabber so I'm free if you need me. I don't do fiberglass, paint, removing barnacles or any crab pot repairs but I'll work for crabs if you have any like clothes to fold or anything. @@fvsoutherngirl

[@jerrymedlen1948]

Use a Modified Urethane it's flexible and will stick to the Fiberglass. You can use a Vinyl Flake in the Urethane to give it a texture or a Quartz.

[@historyhunter5146]

Get you some of those restaurant quality rugs to put on your floor it’ll help your back , protect the floor, look nicer and prevent anything from sliding during rough seas !!! It’s the orange/red colored rugs with the holes in it. A thick rubber type material. You can cut them to fit the space . Trust me you’ll love it

[@thegreeninvasion5511]

They make a clear sealer for roofs that can be brushed or rolled on! Stuff is awesome, I’m sure it could seal a boat! Can’t remember the name but it’s available at most hardware stores. Should seal the old gel coat and then some

[@arthurrose6473]

This is all so you can tell your kids some day what NOT to do, or how it should be done. Seriously, you're doing an excellent job of depicting the struggle of the uncommon man. I WISH I could do all the things you're doing that I used to do! Good show!

[@2millersadventures]

Any decent topside paint (poly) with some grit thrown in on spots where you step and extra coats in high wear spots. Grinder with a sanding pad goes quicker than a sander but just be careful!

[@fvsoutherngirl]

I’ll give it a try thanks!

[@tomscott3939]

prep work is the key to a good paint job!!!! time well spent!!! do it right and it will last!!

[@curthazlett595]

You need that crazy navy trowel on slip proof shmoo for the floor. That stuff is crazy!

[@RajA-0202]

This dude seems chill. Hope his channel goes into the millions 🎉

[@megacatsupreme466]

447,000 now, was at 16,000 eleven months ago

[@brianburrows9060]

A suggestion for the floor... Get the spray in bed liner at Depot. Pretty durable stuff.

[@fvsoutherngirl]

Not a bad idea! I got some paint already tho!

[@chrishelms1967]

I'm exhausted 😢 just watching this

[@mr_lemon_drop4703]

Your an amazing young man, keep up the hard work.

[@michaelwhiting668]

This boat reminds me of my first 72 Chevy impala. I loved that Chevy. But at some point you have to when to stop throwing good money after bad.😊

[@jamiebell314]

This channel is amazing inspiration. Seeing someone not much older then myself working hard and succeeding for themselves is incredible. Really appreciate you showing some of the struggles along with the good times. One of these days ill have ti head south and buy some crabs

[@robertgracie8949]

Love this show you are one he'll of a guy keep up the hard work

[@Bearaway]

It's all in the surface prep. If it's not clean and dry, the gel coat won't stick, it's that simple...

[@fvsoutherngirl]

I’m going with paint this time

[@fussybugger]

You're crazy articulate, keep on keeping on

[@FVMissPaula]

Can't see it from my Yard.

[@fvsoutherngirl]

We could change that!

[@briancriggs2199]

Keep grinding Luke!!!!!

[@robcain6254]

Can you use a small sandblaster and a small compressor? You should paint it with the stuff they use for truck beds that spray on bed liner

[@fvsoutherngirl]

good idea!

[@danpags7023]

I envy you, my friend. You have a lot going on, but all of it are positive. Your drive is commendable. Do it right the first time you won't have to do it again.

[@keithprevette5002]

You go my brother I had a freshwater boat I used to pull a shrimp net off of Oak Island North Carolina and yes saltwater will eat anything up

[@chewiepac5932]

Hey bud you should watch some total boat videos about glassing, youll get the boat painted an caeaned up when you come to the realization that gelcoat over glass especially polyester glass is the way to go, btw thats a polyester glass boat

[@fastback57deloach27]

Luke the way I see it your whole life is an adventure and we enjoy watching however it turns out! Now turn your camera on and get on with it!! Lol!

[@chewiepac5932]

Eis alaska's channel is working on a glass boat like yours, the emerald isle is a beutiful build you should check it out

[@shadetreecatfishing5729]

keep that drive alive and you will succeed in life!

[@duanelappe9767]

Your efforts will be rewarded

[@EWH87]

5200 is my go-to quick fix for the holes 😂

[@fvsoutherngirl]

That was my previous fix! Haha

[@thisisyourcaptainspeaking2259]

Drill the holes oversize, fill with epoxy-rich slurry, cure then redrill holes. This ensures water cannot penetrate core under the glass. 5200 is a great adhesive sealer but doesn't penetrate wood/glass and lock it all together like epoxy will. Epoxy is an structural adhesive, I use it almost exclusively wherever I can, 5200 as a sealer between water-tight surfaces, trying to ensure water cannot penetrate into the interface.

[@Kahuna54]

If I were closer, I’d help out where I could!

[@johnkolakowski3459]

That’s a good name for a boat “Ambitious Endeavor “!

[@Mike-tc8ob]

Man! I kept wanting to see you break out the power sanders or shot blasters or something that would save you from the antique hand scraper. Sometimes the old ways are the only ways, but you know, you're the youngest crabber on the big B, maybe you should consider one of those fast and furious paint jobs? Like a big crab holding a sword that runs up the side of the boat with some cool tribal tattoo camouflage all over. You would be the envy of all the old men! Oh, and play load rock and roll onboard all the time.

[@johnhamilton9229]

Flying paint chips without safety glasses or sun glasses. You need those eyes to catch crab my man.

[@nicholasflaherty8695]

Nice window art😂

[@jeffreystorer4966]

Good on you thanks ,I'd fix your roof section with a saw , just chop it off n bin it ,go a light weight frame n tarp it ,half your weight n work load

[@pakaornellas4238]

I seen a lot of boats with gelcoat paint do the same here and how are you? I use epoxy paint Valspar that’s what they use to paint airplanes with and can handle the banging around and doesn’t chip easy at all and it’s way cheaper

[@randywendel]

Have you tried Herculiner, the stuff you roll on. It supposed to be like the spray in bed liner.

[@dastu56]

Sorry for your loss. Earbuds are hard to replace!

[@fvsoutherngirl]

Thank you. Moment of silence for my air pod.

[@JP-JustSayin]

"This will take 5 years off my life" This reminds me of a comic (randy feltface i think?) That did a bit that goes ... "what ever is gonna finally kill me ... I already did it."

[@jodidavis6595]

Watching you suffer makes me sad but they way you video makes me laugh.

[@ibbylancaster8981]

Would you like some cheese to go with that whine 🤣😂. Yeah boats suck and I’m not even a commercial fisherman 😂😅. Keep up the good work dude Much love from NC🤙

[@Kahuna54]

I still think you should use Flex Seal paint, it’s so durable and completely water tight!

[@Mike-tc8ob]

Do you think it might hide continuing issues? Thats my only fear of waterproof membranes like that is that you can't see the problem until your floating on a sheet of flex seal. still, works in the commercials.

[@COPPER71]

@fvSoutherngirl Ask Lou from tips from a ship wright here on KZbin about your gel coat painting issues. The fella is an amazing boat builder

[@fvsoutherngirl]

ill look into him! thanks buddy!

[@-RyN-23]

Quick tip, set up time lapse so you can get content while working

[@theladyoflife]

You know what "BOAT" stands for right? Bring On Another Thousand 🤣 I think you make the right decisions brother, so you will be fine! I bought my boat 8 months ago, and I'm living on it and enjoying myself...until I got into an accident at work...now all work on my boat stopped😪 So...I will watch you work, because I have nothing else to do 😆 Keep it up Luke! Oh and here is my little project here in Amsterdam! kzbin.info/door/57VBtQIpQ-nbynO2f8H1dA

[@lesterwicklein717]

thanks for vids ,always good, i would come up for a volunteer day, during the week is best for me

[@fvsoutherngirl]

Thanks for watching! Yeah maybe!

[@bradleycramer612]

Why don't you get deck skins. They use them on fishing boats jet ski's really easy to clean up nice to walk on very durable

[@eddeetz493]

One day Luke will mount some fishing chairs on top for channel fans to drop a line behind the boat while crabbing.

[@fishingwiththad681]

You need a class in fiberglass work. You did a decent job but there are a few things you could do to make it better. If you need a few pointers on fiberglass just let me know. Free of charge.

[@danlamartina8583]

looks like someone just used cheap flat latex on that, I would if you what it to last and I know it's expensive Use two-stage epoxy like Interlux. I use that on the bottom of my grady white and it was still there 20 years when I finally got rid of it.

[@WayneTheBoatGuy]

Luckily we've had some decent weather for this time of year - but then again... All that work isn't lucky at all!

[@fvsoutherngirl]

I did it to myself 🥲

[@justpassinthrough7]

Seems they didn't pain the boat properly

[@CaptSpence]

Look for a zinc primer from Ameron paint. It’ll hold up pretty well

[@fvsoutherngirl]

ill look thanks!

[@CaptSpence]

@@fvsoutherngirl it was a two part epoxy mixture, I think it was 302 Dimecote

[@boatmanboatman7448]

That boat is like my 💯 year house I call it work camp 🏕

[@deeannasmith4917]

You have nice weather for the next few days to get a lot done. Lol.

[@fvsoutherngirl]

This is true!

[@franklinrhodevelt6441]

It's called maintenance and work.

[@Sam-blackwidow7329]

flex seal that boat......😂

[@bigal1863]

Twice as much money and 3 times as much time...yeppers that's a boat alright

[@JDski]

It could be worse. It could be a wood boat.

[@fvsoutherngirl]

True that!

[@dougshirley3460]

Boats are like children and dogs. Best one is someone else's. Non boaters have no idea how much work and money has to go into them. Fuel is the small part. Had boats, bigger than trailer boats, since 1981. GRRRRRR! I love to hate boats.

[@lpdriftn]

Had the same problem doing paint on my boat last year worst job ever

[@fvsoutherngirl]

agreed!

[@michaelwhiting668]

Luke I’m a little old man. I’m no as smart as wealthy as you. Go to a paint store. Take pictures of your project. Show them what have and how you want it to .

[@michaelwenstrup8737]

Get yourself a tri pod dude….. awesome content tho love watching you suffer!! Haha 🤪

[@nikolauschiorgno5884]

Good video

[@fvsoutherngirl]

thanks!

[@shoresharp8349]

Young Daniel Son , paint westsytem fiberglass is in every watermans shed. You ain't no crabber if you ain't got it in the shed. Where is CJ??? Btw who built your boat ? Is it glass hull or glass over wood?

[@fvsoutherngirl]

The southern girl is all glass cut down!

[@fvsoutherngirl]

Buddy hampton built her

[@Snowflakebabytoo9]

Luke keep going it will be fine, it’s just a crab boat. Lol ❤

[@fvsoutherngirl]

I agree!

[@neptune4167]

lmao, 100% me 11:25

[@mrindependent1]

How old are you Luke? U seem super young But I’ve heard u say you’ve been crabbing for many years

[@thisisyourcaptainspeaking2259]

Epoxy is your friend, moisture is your enemy. Polyurethane top coat. IMO

[@creativetradesman6833]

Are you spiffin’ her up to sell? Or are you gonna run both

[@fvsoutherngirl]

Probably crab out of the southern girl this year!

[@richardalan5064]

Teardown is always quicker than the rebuild. The project car hits too close to home.

[@fvsoutherngirl]

I bet!

[@FernandaAcuña-t6t]

Holaaa

[@PrimetimeNut]

It should be illegal to do this while the boat is in the water.

[@fvsoutherngirl]

good thing it isnt!

[@danagius2827]

DUDE HIRE SOME HELP..

[@Michaelbos]

Not be funny here, I’m being serious. You ever think it’s time for another profession ? You work extremely hard and you have saved money by learning to do a lot of work yourself. But this is your living, but think about check and balances. Your making money, but how much are you losing with up keep, etc. you want to save, especially in todays world, where it seems hard working Americans are getting slammed. Just talking out loud here.

[@xxkingslayemxxgamer5553]

It isn't All about the money I have been a commercial fisherman for 35 years in NC once it's in your blood that's it your in God's country everyday would not trade for nothing

[@kenlynch6332]

⛴ ⛴ ⛴⛴⛴

[@angrybigfoot752]

so when i worked at a caterpillar dealer years ago we used Sherman William's marine grade paint on the concrete in our shop. It was a two part paint that was absolutely tough as nails. We drove metal tracked dozers and 30 ton excavators across it without any issues you may want to look into it

[@fvsoutherngirl]

I’ll definitely look into it!

[@bigal1863]

Oh yes this one goes in the keeper file

[@Eric-gi9kg]

I do know your pain. Helped my father refurbish a Round Bottom Poulsbo fishing boat. He bought it from a fishman that was upgrading. Hundreds of hours sanding, grinding, removing and replacing planks, installing a period correct engine, steering, etc. Then, putting in thousands of brass screws and hundreds of feet of clinking. Thought my summer was going to be fun... NOPE. Took 2 1/2 years from disassembly to finish.

[@BurchellAtTheWharf]

3:47 man, fer them screw wholes, bits of Dowel work fantastic, an then a few postage stamps worth of fiberglass and reason , an she be mint

[@stevenjacobs6934]

Keep up the noble work, nice to see a young guy with ambition!

[@noluckchuck1368]

Absolutely..best boat is a friends boat🤣 I have to do a haul out and blast the crap out of everything...boats are the best way to have a million bucks...start with 2 million

[@fvsoutherngirl]

hahaha yes!

[@lockguy2652]

LOL... i am getting serious stand up comedy vibes! Hilarious only because i can relate (not the boat) part but life in general.

[@bpd231martinko9]

Do yourself a favor my friend, get a 3500 psi pressure washer and I guarantee you that you won't need to spend one dollar on sand paper or lot's of hours sanding. Just saying. And PS: Dry dock the boat before you do that, if DNR finds you sanding or pressure washing paint into the water, I just guessing , about 3 to 6 thousand dollars in fines. just saying....Keep up the good fight, love your videos...

[@bigbearccoffin]

Tractor paint or bedliner rino liner linex

[@adamcorbin974]

I was always taught if you do it thr right way it should be done it will last you a lot longer in the future i could never half ass something i just dont feel right you want to be pround of the work you do its much leds to worry about in the long run

[@JustinSchuhmann]

One day builds always take longer than a day - Adam savage

[@victorremick9721]

All your hard work is going to pay off and you have to give linzee a lot of credit as well.

[@gmgjake6945]

Crazy how you came up 100k subs in 3 months

[@michaelsmith-0744]

Pool paint works great on boats it epoxy paint!!!

[@phillipcerrillo2513]

Invite a bunch of friends to a big BBQ with free beer, once they get there put to work

[@chewiepac5932]

Hey brother, they dont take years off your life, it adds years of wisdom.

[@SailingAnja]

The Wisdom to never buy another boat again

[@michaelwhiting668]

Make sure you and the crew use mask most boats have some lead paint.

[@boxfanz1000]

Few more vids and I’ll be ready to crab! Jk

[@Elios0000]

have you though about any of the spray on truck bed-lining stuff stuff for the floor?

[@fvsoutherngirl]

Probably wouldn’t work great. Things kinda need to slide a little on the floor.

[@phillipstubbs8776]

The most interesting videos on the net

[@johnfischer4472]

Fiberglass was put down the proper way. The small first going with bigger each time leads to more edges that introduces de-lamination spots. aka impossible to squeeze out the air where the two pieces meet. Let me know if you got any questions I've spent the last 8 years working on boats, doing countless repairs and complete overhaul/rebuild projects.

[@flyinjeeper90]

Came here to say just that. Are you local to MD John, I'm in the market for just those services.

[@MichaelW-vj6wx]

Rhino liner for the deck.

[@markknister6272]

Experience is a harsh teacher…

[@brucegiilck7730]

awesome vids love this

[@gmatthewclark]

Grinder with a sanding pad is really quick. Just pay attention!

[@fvsoutherngirl]

Hard pads on a Grinder are really good I’ve found!

[@perrybraden874]

Really enjoy TikTok videos but please keep putting out the KZbin videos.

[@MEOW151]

Welcome to fiberglass! 32 grit , also different types of fiberglass, they don't like each other, also scuff and apply new, before moisture embers the fresh sanding. Overnight dew bad, no super hurry, just same day