How I Do All The Right Stuff Wrong

[@anguscole1]

We should start a go fund me to buy Luke, a new refrigerator unit. He is one of the hardest working folks around he deserves it.

[@PerforatedPaperboy]

nevermind it is a work boat

[@jodidavis6595]

I’m in but like he said…works as good as used 😂😂😂

[@richardbeese7635]

Dude I'm 59 I've been stuck in the hospital for 4 months fighting a bone infection, I've owned a few boats up in South Jersey. I thought I was the king of do it yourself but you have me beat I Love your content it takes my mind off this bone infection, when I'm healed up I want a Job I'll work for free just to get a taste of the hustle. Keep up the great content

[@egomaniac247]

Best of lucky Richard, hope you feel better soon!

[@BarbarisII]

Get well soon! We need all the DIYers we can keep, this guy is exceptional but most folks between his age and mine (33) can't even change their oil. Hell, I know a bunch of folks that don't even know how to cut their own grass.

[@pfcfrye]

Feel better dude. You'll be hustling again in no time.

[@lindaorr1805]

Best wishes speedy recovery

[@a_soldierz_genetics]

Praying for a speedy recovery for you, Richard. Much love from Texas 🤙

[@jameslarkin4067]

I’m a diesel boat mechanic on the Chesapeake down in Virginia and we work on stuff like that all the time. If you ever need Cat parts for that thing I suggest Carter Cat. They’re an awesome shop and usually carry just about everything

[@jdub4662]

i can agree cats suck but i love them lol.. not to mention the only time i was there the boat broke down and they were the only ones who had the unusual part and a gasket a few years ago seriously if i member right it was a john or tom or close too lol 4 years ago i did have to crash at the port near broken oar if i member right i seriously cant remember a lot of things off the top but i think thats what i recall i j ow it was off the patapasco river

[@guywilson3233]

So you want to be a waterman lol

[@Nagantfan762]

If you turn the 5 gallon bucket of oil so the spigot is on the high side of the bucket as you pour it, it won't "glug" it will pour out smoothly in a constant stream. It will make it easier to pour with out it making a mess. Works with everything one might pour paint, hydraulic fluid, oil, transmission fluid, ect. Keep up the great work.

[@user-ty8zq2mi1d]

Good call!!!

[@TwoAcresandaMule]

works with all offset spout containers.

[@patrickconnell6654]

He likes spilling helps with the rust, his words.

[@officerkrupke4966]

Needs a vent hole

[@buckfiden1228]

Hoe Lee Sheet…. I wish I would’ve known that earlier in life.

[@chompsmcgee]

That filter's been changed as often as i see my therapist

[@bradleysimpson9819]

Pro tip: Your therapist has wayyyy deeper darker issues than you do 😂

[@motaman8074]

On the one hand, you have Luke. On the other hand, you have the video of the guy at Starbucks crying because they have to work. Thank you, Luke.

[@laker3]

The wire size was correct before you replaced it. It was the burnt out plug causing high amps heating up the wires.

[@mikemunhall7399]

You’re hysterical. Watching at least one of your videos has become a part of my day. You make daily life seem manageable for everyone in a fun way. Your self deprecation is charming. Thanks for posting Luke.

[@1godaboveALL]

❤ME TOO‼🤣👍 This My Guy! 😑No Homo. His Name is Luke? Thank You for sharing.

[@BarbarisII]

Yeah same here. I live close enough to go get crabs from him and plan to asap. Unfortunately, crabs for a relatively large family are kind of expensive, so it hasn't happened yet :/ Hopefully around labor day

[@mikemunhall7399]

@@BarbarisII I would buy Luke’s crabs if I could eat them but I’m allergic to crabs. But it’s just fun watching and listening to his adventures. He’s just such a decent person…and funny.

[@BarbarisII]

@mikemunhall7399 that's such a shame, sorry you have to deal with that! Crabs and shellfish in general are my favorite food, I can't imagine having to avoid them :/

[@hiheeledsneakers]

Amazing, "tighter than a knats azz" is exactly how my dad would put it. He's long passed, I'm 64. I heard you say that and my head whipped around. ❤

[@74GenX]

Modern day macgyver. You give me hope in a world full of panzees! Masculinity exists! Rock on young blood ❤❤

[@MastaT_150]

Little tip for doing electrical work, consider picking yourself up a set of Solderstck crimp connectors, if haven’t already heard of them they are essentially crimp connectors with built in low temp solder and shrink wrap all in one so the make awesome weather tight connections. They’re kinda life changing if you do much electrical work like that. Heck you may be able to score a partnership with the as the do help out a lot of automotive KZbinrs. 😬

[@Eddie80580]

Yelling while working on an engine is so relatable

[@dsimon966]

The only problem with the noise is that it’s harder for your “coworkers” to know how angry you really are.

[@chucklevision3961]

I've not seen your channel before, one of your videos just popped up randomly, I've got to say, I'm completely blown away by your indomitable spirit & tireless hard working drive! One day Luke, all your efforts will pay off & you'll strike gold, it may not happen in the way you think, but ultimately, it w.i.l.l. happen for you. Keep striving forward, you're going places, honestly.👍 Blessings ✨🙏✨

[@paultkr8184]

Luke,,, you are an awesome young fellow. More young people should have your enthusiasm and work ethic. Do not despaired doing it wrong , we all learn from our mistakes. I applaud your strength.

[@1godaboveALL]

❤Well said‼ My sentiment exactly.

[@dr.strangelove7739]

Don't let anyone tell you different about the old CAT motors you are using. 3208's will run forever if you take care of them. We use them in the oilfield. Also, without all of the ridiculous computer crap they have on the new engines, they are easy to work on. The reason mechanics don't want to work on them is because they cant charge the higher prices.

[@pooh143luv]

Their only flaws are in the front of each head they have some plastic clamps that give way and you spill your antifreeze and if your not paying attention overheat ur engine and these clamps are hard to get to . My advice a good oil and temp alarm with a loud buzzer. I don’t think he has one

[@72plyduster1]

I give you this little info, if you know this sorry to be waiting your time, usually you should not start and stop refrigerating equipment without letting the compressor rest for at least 15 minutes. This allows the compressor to equalize the internal pressure, so when you start the compressor it is starting with zero pressure. Hope that makes sense.

[@ehass85]

Bucket loads of respect and admiration for someone willing to get stuck in and make shit work. Clearly a solid work ethic and good values.

[@ChrisMcIntee]

classic quote from an old salty captain, "if you dont have time to do it right the first time, when will you have time to do it a 2nd time".

[@rc_reefer7449]

Luke your doing a GREAT JOB. For the oil filters they sell a wrench that goes on them with a cloth strap and a 1/2 ratchet or breaker bar. that should make it a little easier on you. take care and keep it up.

[@gravely1000]

Get a lisle brand filter wrench and ditch that bent up unit you are trying to use before you injure yourself.

[@patrickconnell6654]

While filling it up, spilt it all over this thing, remember your words Luke, spilling a little helps protect from rust. Life of a small businessman Luke shows us firsthand the grind and sacrifice it takes. Keep grinding away Luke.

[@mcmillan1963]

Keep hammering away kid. Your ambition and perseverance will pay off. Love what you're doing.

[@humaux8457]

"I love burning the living piss out of myself" 🤣🤣🤣🤣 I was laughing so hard i couldn't breath.

[@robertjolley8715]

You are a hell of a young man! The sky is the limit for you!

[@curt2580]

Rewatching these videos. I love em. Take care of your equipment and it will take care of you believing I’m a truck driver.

[@mikemoonman1940]

You'll be these the good ol days before you know it man don't quit.

[@Doug8D3]

PRO TIP* Pour with the spout on the top, and the oil won't glug out, making a mess. You have to be able to let air in as oil comes out.

[@bocajred11]

I’ve seen a small brewery use a window AC unit to cool their walk in cooler, it was just a small one, probably a little bigger then your trailer. It worked great kept it below 40 degrees.

[@kylegallardy1894]

Was going to suggest this

[@toddlarmon3708]

You are amazing Luke! You seem to have an answer to every problem. You can fix anything and you are entertaining too. Love your channel Sir!😉

[@dehnger]

Made our Sunday here. Love the channel and love your attitude man, what you leave unsaid notwithstanding, youre a beast man. All the best from me and mine

[@Prodigyautodetailing]

I love your channel the most humble guy I know and loves the simple things in life sooo ! Thankful love learning from you not afraid to say 😁💪🏼

[@MrMattDat]

Hey Luke! Great to see you at it again. Two things I hope will help you are 1) Use your dielectric grease on all exposed copper (like that ground wire that was all oxidized and cooking the contact) and 2) Invest in some "solder seal wire connectors" from companies like TICONN or Kuject for any splicing or connector replacement (VERY handy). You might consider buying some gun oil or just a lightweight oil and wipe down all your tools to slow down the rusting. You could also blacken them, but that would take more time (better, more durable coating though!)

[@killachef91]

Keep it up brother! I feel the same as you in a lot of ways! Started a food truck a little over a year ago. And it has been fun but also very challenging in a lot of areas

[@lindaorr1805]

I am just relieved I didn't see a big arc when you plugged it in. Love as always👏😎👍

[@newdoggproductions]

I swear, one of these days, this Seabee is gonna just show up and start fixin your shit lol. Your vids make me feel your pain lol. But you doin what you gotta do, much respect for the hustle brother.

[@anthony3603]

Flip the bucket so the spout is closer to you and it will pour much better

[@chrisgallagher3703]

You the man Luke !! Sweet work brother!!!

[@GetUsum03]

Your a hard worker self driven is the way to be your doing great at it keep pushing forward

[@thomasferrara3148]

Hi Luke, on my 3208 in my charter boat I break the filters loose before I warm the engine breaking loose. Spin them on until they barely touch start your engine let it warm up and It will come right off.

[@anthonydebacco2106]

Man you definitely the crab goat keep up the great work buddy love you videos Louisiana down here

[@JohnDoe-jc3cl]

I’m grinding it out too You ve been a huge inspiration to me this spring and summer Jim in Chicago Do a video on where you got your work ethic from. Get to work!

[@jmb1762]

One law of thermodynamics, as metal gets hot, it expands. So your oil filter threads have expanded and are now constricted against the engine block threads. Try loosening when cold by a 1/8 turn. Then run engine to get hot.

[@robertcarter9693]

Oop’s….wrong way. Funny as hell….love watching you work😂

[@dwayneroberts6616]

I'm getting ready to go work on my live well pump and a bunch of other stuff. I'll lose a gallon of water in the first 15 minutes. It's 90 degrees out with ridiculous humidity here in Florida. I just sit in that big white tub and bake😂

[@danaecoyle4222]

Not many young guys like you around, so much energetic enthusiasm. Very rearly see people who love there jobs. If I had money I'd be helping you out. But I will watch. Thank you

[@texanoutdoors6409]

Hello from Texas, you definitely have a Texan work ethic for sure.

[@joelphow6314]

Good day, and a positive life for Luke! Stand strong and maintain some resting time overly Best wishes

[@bpd231martinko9]

One suggestion I would have for you- use Never Seize on all of your bolts. I believe they make a salt water formula, I had some many years ago and It was green. The guy that gave me that stuff said they used to use it on underwater connections at the Philadelphia ship yard back in the day. Since I ran out of that stuff I have been using the Copper and Nickle formulas, never have a problem taking stuff apart, it's messy if you get it on you but well worth using, saves a lot of time getting stuff apart. I recently discovered that Harbor Freight carries it. Keep up the good work. Just think you only have about another thirty plus years of fun to look forward to.

[@b.morris2816]

Never enough time to do it right the first time but there is always plenty of time to fix it when it breaks.

[@johnprue]

Hey that's a good strong motor you got right there just take care of it 👍

[@lizzard7473]

Just the title of this video brought tears to my eyes. I feel ya dawg.

[@deadmanzdayz]

Luke, I have to applaud you on your hard work. Most people your age don't even want to work or move out of their parents house, you doing all this work at your age is rareity. Keep grinding young man and your grind will only turn into success !

[@Kahuna54]

I like the just long enough drill bit you used! Use what you got works!

[@tylerhouck]

New subscriber, your videos are awesome. Keep it up man, I have days like this all the time. Just keep kicking the can.

[@jripn8543]

I’m commercial crabber 22 years , bought me a thermo king reefer van brand new ! Thinking I can haul all night and deliver when I wake , that fkn thing broke 3-4 times in year and half !wtf

[@scottzimmerman4951]

Keep it up Luke! You’re the man!

[@miked9606]

Luke love the channel. Get a belt wrench for the oil filters. Large size. Oil filter will not have a chance with that tool.

[@klatt4057]

Truck camper suggestion for one person operation. Hang camper with ropes and pullies from tree limb or other support. Drive under and lower camper on bed or lift off. If you dont have a tree suitable, build a simple wooden A frame to pull under and just raise or lower your camper with the ropes. God bless.

[@timmoline2190]

Respect brother. You haven’t quit and still fight. 👍

[@kd8bac]

Get yourself a large channel lock pliers to help you get the filters off. It works great when you get a stuck filter.

[@mudd4284]

Man, you sure remind me of myself. Love you bro!

[@oneamericanpatriot108]

Mechanics tip - Find an old leather belt. Get a length of steel pipe of about 18". wrap the filter with the bet and put the pip through the belt between the filter and the belt, then twist the pipe until the belt is tight around the filter and start turning the filter. If it slips twist the pipe more until tighter and repeat until the filter comes loose. I promise its easier than the crappy filter wrench.

[@michaelwhiting668]

Luck, I have never seen anyone with as much energy as you.

[@Nate-bc1el]

doing good man, even filled the filters and oiled the seals! on the rudder, that thin fibreglass will keep doing that, would plan on getting a glass guy to reinforce it properly sometime in the future ( and i'd want to seriously inspect the rudder log for fatigue from all the years of flexing) and as others pointed out, turning the 5gal bucket around will let the bucket vent, and reduce the glugging, and you can pick up a strap wrench for that rachet, and get some serious leverage on the filters.... keep it up! quickly becoming a favorite channel man, doing good

[@user-hh5my5ux5k]

You are smart and hardworking!!

[@GarryD]

2:03 That made me chuckle. My mind went wayyyy south. LOL

[@who_is_asking]

Pro Tip. Smack a hole in the bottom of the filters with a lady finger or Phillips screwdriver. Direct the oil with a funnel that has a bendy neck. After the oil drains out. Use a grease gun. Put a pump of grease in the hole you made to stop it from leaking. No mess to clean up.

[@jodidavis6595]

You know it takes some talent to talk to a camera and with no one else to commentary back to you. He has the best sense of humor. God keep him safe.

[@Rags74017]

Thermoking should sponsor your channel!!!

[@A-DUBCLUB]

U guys kno Y i subscribed and personally praise young luke here, hes a young man already out trying to build his own little empire to provide for himself and his other half. The thing with this new generation of young men is most are not out hustling n bustling to earn that precious dollar. Half of this generation all day are sitting at home playing games or at the pc worrying abt social media than getting a real job to build up that nest egg. The other quarter is either out in the streets every night breaking into ppls houses and stealing cars or destroying other ppls property. Then the remaining quarter is either just too dammmn good to work for someone or they complain about not being paid enuff for there time or are requesting to work less but are expecting to be paid more. Tell ya wat though.. there is nothing harder than being a young entrepreneur. The start is always the most difficult.. getting that rapport and customer base takes time. There is so much choice for ppl to choose from so u have to give customers a good reason why they should part with their money on you. If u have sons n daughters thats young n already know how to fend for themselves and earn there living, your the lucky few.

[@kingstoeck]

Like you are a solid guy! Enjoy your content and you seem like a hard working, genuine guy. Small tip for future, those bolts and nuts you used, you ever think to try using lock washers between the plate and nut? To keep the nut from pulling into the wood. Also try nylon but not sure that will hold up, if not stainless steel maybe. Good luck man!

[@dustanthornton5532]

Doing great little buddy. Keep it up. Take care of the equipment it'll take care of you

[@tautog4424]

luke, good move doing ur own work, helps with the bottom line....a couple of suggestions, buy a can of pure teflon grease and use that to pre lube the oil filter gasket and threads on the filter...you will notice a difference the next time u r enjoying urself changing the oil.....also if you turn the 5 gall spout the opposite, even though it sounds odd, you won't have the issue with spills. as a former mechanic this truly will work.......keep up the good work. hope ur pots are loaded with some nice whales....

[@officerkrupke4966]

needs a vent hole

[@Baysahiyah]

I feel ur pain bradah😂 the reason why the oil filter is hard to take off after u hand tight it, is bcuz the heat expands the metal🤙🏾💯

[@chrishidalgo5998]

Love the sound effects, been there done that on cars😂

[@robertschemonia5617]

Pro tip from a heavy equipment mechanic: When pouring oil out of a 5 gallon bucket, pour it with the spout on the top. It lets air in as the oil comes out, keeping it from making a huge mess. Try it. It works.

[@vinnycobb3713]

Thanks for the great video Luke!

[@TonySeagle]

The mistakes you make now will be the knowledge you pass on to your kids so keep up the good work! They'll be some kick-a$$ crabbers.

[@MrKACharlie1865]

T-shirt idea... "Good as used" FV Southern Girl... loving your content.

[@BrianBHatteras43c]

I love that Permatex dielectric grease, and I do the same thing… get too much on first use! You are not alone

[@douglasgottschall2883]

Luke, When your pouring out of the 5 gallon pale. Start pouring with spout on top it will leave air in .

[@joejones7523]

Hey buddy pro tip, hold your 5 gallon bucket of oil with the spout on top when it's full. It will pour smoothly

[@robertschemonia5617]

I run Rotella T4 15W-40 in everything I own. My lawnmowers, my old '81 KZ750LTD, my clapped out 2000 Silverado with 278K on the clock of the ol 5.3 Its great oil. Has all the vitamins and nutrients an engine needs.

[@traceyandymcintire9288]

Put a gallon zip lock bag around the filter when taking it off

[@Georges3DPrinters]

11:52 omg been there so many times. Rotary air compressors have some big friggin fikters and oil air separators that are even bigger. I have moved the equipment trying to get them to budge. They are not fun, i have the home depot strap wrench for one hand and a ½" ratchet drive strap wrench in the other wit a breakerxbar and extension. I have collapsed them many times.

[@kajunkat72]

Dialectric grease all I put on filter gaskets/orings for years, they always tighten up and come back off nice 🤙

[@joeshmow1583]

Hey just a tip for next time, pick up a pair of rubber dish gloves to use when dealing with the hot oil. Will keep your hands both clean and cool!! Also next time you go to do a maintenance day write down what you want to do then what those tasks will require. You said people would say do it right the first time and your response was you didn't have time. But you made a trip to the hardware store for supplies and you had planned to fix the rudder support since you already had the braces. It's not that you don't have time it's just that you are being pulled in a million different directions. Maybe just try writing down things with a little more detail a couple times and see if it helps. What's the worst that that will happen, you give it up and go back to flying by the seat if your pants. Love the videos and absolutely respect your hustle and refusel to ever give up.

[@richardpippin6159]

Luke you always place oil on the filter gasket and never tighten more than hand tight. You’re working too hard! Again! Love your videos!

[@j.j.clingman4083]

Hey Luke you should definitely try loosening the filters before you start the engine and warm the oil up!!! They might be easier to loosen up while they are still cold!! Metal does expand when it gets hot so that could be part of the problem when you are trying to take the filters off after you have warmed the oil up!!! Yes I am a mechanic and have had issues before when changing oil that someone else had done the time before I got the job!!!

[@JohnDoe-jc3cl]

👍

[@davidlabar6688]

Love your content keep up the great work. BTW anything on any boat should have silver antisieze on it (like the rudder post stabilizer)

[@markessic6145]

Love the sound affects we all have been there😂

[@girldad1994]

I have an idea for the truck cap. When you take it off, back under a tree limb and use a chain hoist. Let it hang until you need it back on. Not sure if you tried that before but it's worth a shot. Thats almost as bad as hooking up an auger on a tractor.

[@grandtheftundead6634]

Love the content, id say its safe to say. You need a new oil filter wrench haha

[@Papapickles69]

Great video brotha, I hate when I get oils and stuff on the things I’m working on too especially if they heat up and start stinking lmao🤣 I learned a can of brake cleaner helps a lot, but that is probably real THICCCC oil like you said. Anyways, keep it up man!

[@mitchelsanborn2395]

If you ever need decent size wire for power and negative, just buy jumper cables. They’re a little thick but are very nice and cheap

[@alananderson1615]

Man you have picked a hard path through life. Good luck my guy.

[@Buck_Fudder]

When talking about the mixture of materials of hardware you forgot the ol fisherman saying "the stainless will be isolated"

[@shotbycoaster]

Hey bro I worked on garbage trucks with big old mechanical Cummins in them, those filters can for sure be a pain in the ass!😂 type in google “breaker bar filter wrench” basically the same as what you got but with a 1/2” drive receiver so you can hook in any length breaker bar you’d like, either that or a chain wrench!! Love the videos bro🤙🏼

[@jasonhinshaw9018]

Anyone that talks smack in your comments either has never had or owned a boat or has way more money then they need keep up the great content and hard work brother

[@lovinglife69]

"Thats tighter than a gnats @ss" 😂😂

[@jerryforeman4543]

Use the force Luke!