FX Dreamline Tactical Huma Air regulator installation

  Рет қаралды 81,899

Airbuks

Airbuks

Күн бұрын

Пікірлер
@MARKLINMAN1
@MARKLINMAN1 5 жыл бұрын
one of the BEST airgun guys on KZbin! Explains EVERYTHING smoothly and very accurate. Love it! Cant wait to get my Compact FX. My Lelya in .22 is AWESOME.
@Airbuks
@Airbuks 5 жыл бұрын
Thx guys , I love to do these videos to help others ! I hope to be doing more in 2020
@Eralov
@Eralov Жыл бұрын
thanks man. without your video i would have damaged my rifle for shure. Everything worked perfectly. Thanks so much
@Airbuks
@Airbuks Жыл бұрын
Glad the video could be of service 🤣 well done 👍
@mintramatrial
@mintramatrial 5 жыл бұрын
this rifle is very good ... the ideal dream for the bedillers. very special master
@leftymadrid
@leftymadrid 4 жыл бұрын
Excellent video! These videos are exceptionally well made, clear narrative talk, keep it simple type of editing, and super helpful for many I'm sure... I did notice when you tested it with that factory regulator, that it was doing an ok job, keeping the spread around 28-30 fps in a 40 shot string... I wonder what the shot count AND the spread would be now with the Huma regulator?! I'm sure it will give a difference in numbers, making this air rifle super accurate. In my set-up and specs, in an air arms rifle of mine, I am getting a spread of 14fps! In a 48 shot string! Which is rather impressive wouldn't you say?! Well, I had to subscribe, as everything I've seen so far is great stuff, very informative!
@Airbuks
@Airbuks 4 жыл бұрын
Thx for the support and sub 👍🙏🏻 It is difficult to judge the factory numbers as when I tuned it properly the spread gets a lot less , I realized it came from the factory with the hammerspring overpowering the valve and getting inconsistent results , now I get a extreem spread between 11-18 FPS depending on the weather ( cold = more variation) The Huma is a little bit better in my opinion then the stock one giving a few extra shots en some thighter spread but again tune is key . If my original one works perfectly like it should the difference is to small to change it but if it’s breaks or creeps I will swap it for the Huma one
@mindful1786
@mindful1786 5 жыл бұрын
Really good explanation. the best I have ever seen.
@Airbuks
@Airbuks 5 жыл бұрын
Thx for the kind words, appreciate it !
@flytelaw1
@flytelaw1 5 жыл бұрын
Very professional and easy to understand!
@Airbuks
@Airbuks 5 жыл бұрын
Thx 🙏🏻 for the support , much appreciated
@owdred6314
@owdred6314 4 жыл бұрын
Excellent comprehensive video thank you some much
@therodenthitman
@therodenthitman 5 жыл бұрын
If anyone watching this has an Impact, Huma make the BEST single shot trays. Put 2 of their regulators in a couple FX Boss's i had also. Great products!
@pasegers
@pasegers 5 жыл бұрын
great , very clear and well made video again ! Huma is great stuff hé ;)
@Airbuks
@Airbuks 5 жыл бұрын
Thx 🙏🏻 indeed they still make a difference 👍
@pasegers
@pasegers 5 жыл бұрын
@@Airbuks i was sure ;)
@lesmo9627
@lesmo9627 10 ай бұрын
Always excellent vids
@mrnoname5162
@mrnoname5162 Жыл бұрын
Very good video. How ever, I´m very confused. Just bought a dreamline, and a power plenum. That goes between the cylinder and the gun right? What you are showing, is that a extra piece that you need for the "tank" And with the tank you have more options? Or is the piece you are showing the thing you need to be "linked" to lets say a divingbottle? Sry for silly questions, but I rather ask em then staying dumb.
@Airbuks
@Airbuks Жыл бұрын
No problem mate the setup is like this . Action block - powerplenum - bottle adapter. If you have a tube style Dreamline you don’t need the tube and can just put the powerplenum between the action block and the tube . The bottle adapter gives you offcours the option to swap the tube for a carbon fiber tank .
@mrnoname5162
@mrnoname5162 Жыл бұрын
Thanks
@ariamaguila8549
@ariamaguila8549 2 жыл бұрын
Which lubricant can be use instead of the huma one. I finally installed the huma reg in my Maverick and its taking a really long time to recover after each shot. I think its creeping too.
@Airbuks
@Airbuks 2 жыл бұрын
Super lube is also a good product www.bol.com/be/nl/p/super-lube-siliconen-vet-met-ptfe-85-gram-tube/9200000129696000/?Referrer=ADVNLGOO002060-G-129938608457-S-989657914315-9200000129696000&gbraid=0AAAAAD5OnmO8VfD825dvPEdLvhlkDkSB8&gclid=EAIaIQobChMIiJyQ2pfw9wIVFNZ3Ch3JEw5qEAQYASABEgLQx_D_BwE The link is just a example , you should be able to buy it where you live aswel
@ariamaguila8549
@ariamaguila8549 2 жыл бұрын
What does the 0.4 mean? Is that the thicknes of the washer?. Thank you for your time.
@Airbuks
@Airbuks 2 жыл бұрын
Yep , thickness of the belville washers . These days you have different thickness for different setups
@FreeFloridaAirgunner
@FreeFloridaAirgunner Жыл бұрын
Have you ever installed the Huma Regulator into the plenum tube for the FX Maverick?
@Airbuks
@Airbuks Жыл бұрын
No 🤔 but it should be straight forward
@jlk22182
@jlk22182 5 жыл бұрын
Simple, easy and strait forward "How to do it" video. Good camera view. Thanks. Q1 What is the working pressure range on the original FX regulator? Q2 What is the default pressure set to. Q3 Do you know what the different is, in the 3 models of Huma regulator that make change the range.
@Airbuks
@Airbuks 5 жыл бұрын
Hi 👋 thx Q1 in FAC it between 100bar and 150bar Q2 mine was set to 145bar in .22 Dreamline compact Q3 the difference is the kind of bellvile washers they use the ones for extra high power are tougher then the higher pressure ones ect . and also the different way of stacking them . But to know exactly you can send Huma a mail and they will answer you in more details
@nicimoyou
@nicimoyou 5 жыл бұрын
Airbuks please can have your direct contact or e-mail best regards
@Airbuks
@Airbuks 5 жыл бұрын
nicimoyou you can mail me at Airbuks@icloud.com
5 жыл бұрын
I like this gun! very beautiful! and I also enjoyed your video!
@Airbuks
@Airbuks 5 жыл бұрын
Thx
@MiLsDoTs81
@MiLsDoTs81 5 жыл бұрын
FX airgun, the best 👍👍👍
@wildscorpion73
@wildscorpion73 3 жыл бұрын
Amazing! Very detailed instructions so even child could assembe the regulator. Can you instruct me please how to asseble regulator with only 9 washers for extra high pressure. I got only 9 washers for pressure 135-200 Bar not 12 like you have in this video. Thanks
@Airbuks
@Airbuks 3 жыл бұрын
🤔 don’t know that , but you can find a guide how to stack them on the website of Huma air
@ariamaguila8549
@ariamaguila8549 2 жыл бұрын
I order the huma regulator for my maverick and the regulator body is a little wider that the amp regulatorI was unable to screw it in the gun and it is suppose to fit the maverick. Do you have any idea why could that be? Thank you.
@Airbuks
@Airbuks 2 жыл бұрын
No sorry this I don’t know , contact Huma for assistance
@chrisfigueroa3361
@chrisfigueroa3361 5 жыл бұрын
Great video thanks for sharing the information
@Airbuks
@Airbuks 5 жыл бұрын
Thx , your welcome
@patriciacristobal6977
@patriciacristobal6977 4 жыл бұрын
Just one question, power plenum is posible to be added with no modificaciones? Thanks.
@Airbuks
@Airbuks 4 жыл бұрын
Yes it’s , drain all the air and place the power plenum between the action block and bottle adaptor
@fabianhessink
@fabianhessink 4 жыл бұрын
Will you do a video on installing de new Huma 30cc plenum in the dreamline?
@Airbuks
@Airbuks 4 жыл бұрын
If someone sends me a air tube I would like to do so 😉 the Huma power plenum is made only for the tube version and I have the compact and carbon tank . Sorry 😐
@donspiteri6814
@donspiteri6814 14 күн бұрын
Great video mate.
@ariamaguila8549
@ariamaguila8549 2 жыл бұрын
Is that the 14mm piston or the 16mm. I think the 16mm piston uses 14 spring washers instead of 12. Am I right? I have the maverick and I installed the huma reg with 12 spring washers and for some reason its still having some creep and taking a long time to recover after each shot.
@Airbuks
@Airbuks 2 жыл бұрын
Hi , I am not sure exactly what size it was as it’s a older video I made . I would advise you to contact Huma by mail to ask this as some regulator piston and washer sizes depend on different serial numbers. In the life cycle of the production FX something change certain components to improve there products
@alanchan463
@alanchan463 Жыл бұрын
What will happen if without the little piece delrin installed?
@Airbuks
@Airbuks Жыл бұрын
Te reg won’t work 😉
@alanchan463
@alanchan463 Жыл бұрын
But mine (Maverick)seems working good for few months.
@Airbuks
@Airbuks Жыл бұрын
@@alanchan463 you mean that little white disc ?
@alanchan463
@alanchan463 Жыл бұрын
Yes and it is gen3
@ariamaguila8549
@ariamaguila8549 2 жыл бұрын
If you have to degas the rifle, will the huma degas the same way as the amp regulator?
@Airbuks
@Airbuks 2 жыл бұрын
Yes 👍🏻
@rolis.j
@rolis.j 4 жыл бұрын
i got new dreamline compact,and i noticed its leaking an air from 250bar to 150 about 3-5 days,any sugestion where to search and how to repair?
@Airbuks
@Airbuks 4 жыл бұрын
Ai , sorry to hear that 😣 . The best way to find out is with some leak detector spray ( local hardware store ) and spray it on all the possible connections . Most likely at the bottle adapter or the gauges
@doomfathertm8771
@doomfathertm8771 2 жыл бұрын
Does all this apply to the dreamline lite compact?
@Airbuks
@Airbuks 2 жыл бұрын
For every bottle version if the Dreamline yes . For the tube versions it’s slightly different I think 🤔
@rolis.j
@rolis.j 2 жыл бұрын
Airbuks hi ,can you help me? i have huma air reg , that is gen 3 , it come 14 stacks of bellvile washers it is 110-165 bars hi pressure ,do i use them all 14 or use like in video only 12? ps i like the all yuor videos :) thanks
@Airbuks
@Airbuks 2 жыл бұрын
Hi , thx for the support 👍🏻 Regarding the regulator: I am not super familiar with changing the configurations on the regs but if Huma advises to install 14 washers I would do as the intended. Maybe there washers are a little thinner and behave differently then if you would install 12 🤔
@Slapsamillion
@Slapsamillion 3 жыл бұрын
Could you get the EHP package and just use less washers?
@Airbuks
@Airbuks 3 жыл бұрын
Explain exactly what you mean . To get less in pressure?
@Slapsamillion
@Slapsamillion 3 жыл бұрын
@@Airbuks Sorry I made that comment before seeing how they were stacked. Pretty sure that answer would be no.
@nicimoyou
@nicimoyou 5 жыл бұрын
Hi please sir if you can find me some information about tact compact : full length and weight for tube version.
@Airbuks
@Airbuks 5 жыл бұрын
Sorry sir I don’t own a tube version. But I think you can find some info here fxairguns.com/rifles/dreamline-tactical/
@nicimoyou
@nicimoyou 5 жыл бұрын
How many joules in 22 ?
@Airbuks
@Airbuks 5 жыл бұрын
@@nicimoyou 33.5 Joules but you can shoot them faster if you want
@priyonoherlambang2338
@priyonoherlambang2338 4 жыл бұрын
This is great video. I like this video very much. I hope more and more video will come from you my friend.. 👍👍👍
@Airbuks
@Airbuks 4 жыл бұрын
Thx mate , more videos are to come. It slowed down abit the last 15days but I will be back very soon
@priyonoherlambang2338
@priyonoherlambang2338 4 жыл бұрын
Helo, i'm interested to replace my factory regulator with huma air regulator since it's leaking now. My rifle is fx dreamline tactical bottle cal .177. As you described in the video that there are 3 pressure type. Which one is good for my rifle? So i can get high power and longe range target. I like to shoot in 100m. Can i choose the High Pressure one? Because in the future time i plan to change the caliber into .22 . Please give your best suggestion for me. Thanks my friend.
@juandediosmoraduval1591
@juandediosmoraduval1591 Жыл бұрын
Can install the regulator to Hatsan factor
@Airbuks
@Airbuks Жыл бұрын
I don’t own any Hatsan
@Jonaslm93
@Jonaslm93 4 жыл бұрын
if i want to shoot slugs with my compact .177 24J, can i just switch this to EHP and the rest of the gun wont break? just using alot more air?
@Airbuks
@Airbuks 4 жыл бұрын
All the breech blocks are exactly the same so you should be fine . To be sure you can go to the website of FX and ask it on the support section . It is possible that there is a difference in hammer weight or spring
@rudy_yazz7307
@rudy_yazz7307 5 жыл бұрын
The best 👍👍👍
@ganantachennel1270
@ganantachennel1270 3 жыл бұрын
May i know where i can buy that thank??? Can i buy in Amazon???
@Airbuks
@Airbuks 3 жыл бұрын
It’s a OEM part from FX , you can buy it from Huma air or Krale Schietsport and in any fx dealer
@ganantachennel1270
@ganantachennel1270 3 жыл бұрын
@@Airbuks may i know what this tank name???
@Airbuks
@Airbuks 3 жыл бұрын
@@ganantachennel1270 I believe it just calls “ FX Dreamline compact 170cc airtank “
@craigharrell1372
@craigharrell1372 4 жыл бұрын
I’m new to PCPs. What’s bad about the FX regulator to make you want to replace it with a Huma?
@Airbuks
@Airbuks 4 жыл бұрын
Nothing bad at all , they are just fine giving great results. Look at it like a high end sports car , every thing is fantastic but there are a few after market accessories that give you that little bit extra performance.
@biakmawia
@biakmawia 3 жыл бұрын
Which 1 will be good for bench wildcat mkiii or dreamtac both at 500mm
@Airbuks
@Airbuks 3 жыл бұрын
Difficult choice 🤔 the wildcat in my opinion I would choose more for hunting. If you put the Dreamline in a chassis with monopod at the back then I would go for the that as a benchrest gun . Standaard they will preform these same
@finforcer
@finforcer 3 жыл бұрын
Does this installation method also apply to the FX Crown?
@Airbuks
@Airbuks 3 жыл бұрын
I don’t own a crown sadly enough, so I can advise you on that .
@ronaldkonings8117
@ronaldkonings8117 4 жыл бұрын
Whats the reason you change these regulators?
@Airbuks
@Airbuks 4 жыл бұрын
Sometimes people like to change them when they experience some regulator creep or want a regulator that cannot a little bit higher in regulator pressure. I am just making these videos to show how to install it
@fjqtaxch9
@fjqtaxch9 5 жыл бұрын
Nicely done!
@Airbuks
@Airbuks 5 жыл бұрын
Thx
@yamar6
@yamar6 4 жыл бұрын
Did u have to adjust the hammer spring after the installation?
@Airbuks
@Airbuks 4 жыл бұрын
You can just swap it and leave the rest like it is from the factory , your shots will be abit more consistent and you can maybe have a few extra per fill .
@doomfathertm8771
@doomfathertm8771 2 жыл бұрын
Hi, I have another question for you. According to the Huma gen 3 reg manual, the only difference between low, high and extra high power regs is the belleville washer stacks, is this correct?
@doomfathertm8771
@doomfathertm8771 2 жыл бұрын
never mind, I see now they washers have different thicknesses too
@seanbooth9416
@seanbooth9416 4 жыл бұрын
Hi do you know if the UK 12fb Dreamline Tactical has a adjustable regulator or not ?.. thanks
@Airbuks
@Airbuks 4 жыл бұрын
No sorry 😐 I don’t know . Mine is a FAC
@ptescreen18
@ptescreen18 4 жыл бұрын
Sean booth yea it’s adjustable but only to about 120
@MikesBigTrouts
@MikesBigTrouts 3 жыл бұрын
good job,man!!
@Airbuks
@Airbuks 3 жыл бұрын
Thx
@MrRockstar1968
@MrRockstar1968 Жыл бұрын
What was wrong with the FX regulator?
@Airbuks
@Airbuks Жыл бұрын
Nothing wrong if it’s well maintained, but I just made the video to show how it’s done for some that would like to change it to a Huma
@MrRockstar1968
@MrRockstar1968 Жыл бұрын
@@Airbuks I wouldn't know how to even maintain a regulator.
@Airbuks
@Airbuks Жыл бұрын
@@MrRockstar1968 oh , then you have a lot to learn 😉
@headcrackersilentsniper9111
@headcrackersilentsniper9111 5 жыл бұрын
Where does the valve sit in the dreamtac? I heard of the valve breaking in certain models. I have a dreamtac and I have a leak coming from the adjustment screw area
@Airbuks
@Airbuks 5 жыл бұрын
The valve is located behind the bottle adapter , I have about 2000 pellets true it in 22 and 25 . No issues . If you have a leak at the adjustment screw of the reg you need to service it and put some new orings and grease
@gameboymaxin1825
@gameboymaxin1825 4 жыл бұрын
Geoff Redick w
@ИгорьРященко-б9к
@ИгорьРященко-б9к 4 жыл бұрын
tell me what diameter belleville spring, 12 or 15mm?
@Airbuks
@Airbuks 4 жыл бұрын
I will measure it be time I take it apart , or you can ask Huma air
@ИгорьРященко-б9к
@ИгорьРященко-б9к 4 жыл бұрын
@@Airbuks ок
@flytelaw1
@flytelaw1 5 жыл бұрын
Is it the same for the bottle version? Thanks!
@Airbuks
@Airbuks 5 жыл бұрын
This is the bottle version , the tube version is different
@jorgengeesink2538
@jorgengeesink2538 4 жыл бұрын
I think I read somewhere that you are not supposed to engage the safety when the rifle is not cocked..
@Airbuks
@Airbuks 4 жыл бұрын
Hi, there is absolutely no harm in engaging the safety when the rifle is cocked. The safety is a mechanical lever that blocks the possibility to pull the trigger so it’s absolutely fine . But what I thing you have heard is that you are not allowed to change the hammerspring setting when the rifle is cocked, this can inflict damage to you system
@tommoore8458
@tommoore8458 4 жыл бұрын
Your Videos are incredibly professional and informative. They have helped me save time, effort, and cost already. So I am wondering if you can do a video of the fitting of the "Huma FX Dreamline Power Plenum XL 30cc Set With Tuning Regulator". I am sure this will be of interest to many people, and I cannot find a you tube video of this yet. But feel if anyone is likely to demonstrate this well, then it will be you. Thank-you, and I look forward to it. FYI - Am using Dreamline Compact Tac .22 with compact barrel
@Airbuks
@Airbuks 4 жыл бұрын
Thx for the support 👍 I can ask Huma if the would like to sponsor a video like that 🤔 . But from what I see the Huma xl plenum is for te tube version not the compact
@andrewb8809
@andrewb8809 5 жыл бұрын
Good stuff, thank you sir!
@Airbuks
@Airbuks 5 жыл бұрын
Hopefully this will help with your installation
@andrewb8809
@andrewb8809 5 жыл бұрын
@@Airbuks It already did and my reg isn't even here yet lol... I ordered the Dreamline Tube reg and from your vid I see I need the bottle one hah.
@Airbuks
@Airbuks 5 жыл бұрын
Drew Breezy that’s sad to hear 😬 it can be confusing when you can do so much with this gun
@andrewb8809
@andrewb8809 5 жыл бұрын
@@Airbuks Well I guess there is a bottle adapter on it, but the website should tell you not to order the tube reg for the Compact lol.
@jc51373
@jc51373 4 жыл бұрын
Some guys have had issues with these regs creeping and the Amp regs back on.
@Airbuks
@Airbuks 4 жыл бұрын
The creep in any regulator is caused by bad orings or no maintenance. If you take it apart service it they both should be fine
@jc51373
@jc51373 4 жыл бұрын
possibly but not everyone is willing to take it that far. My question is, what is the difference between this procedure and just replacing the guages themselves? Is there a benefit to replacing the washer and piston etc? My gun is brand new but I like the readings on the huma better than the FX. Do I need to replace the washer etc?
@patankashif
@patankashif 5 жыл бұрын
So now you change regulator to huma regulator.what else will you change in a high end gun.
@Airbuks
@Airbuks 5 жыл бұрын
I have made this video because I had many requests about it . If you want to change it or not that’s up to you 😉
@fredcarter7003
@fredcarter7003 2 жыл бұрын
How much better is the huma regulator than the fx regulator
@Airbuks
@Airbuks 2 жыл бұрын
At the time of making the video the Huma regulators where superior to the original ones , but lately the AMP regs of FX also became very good . If you maintain the AMP reg well it is on par with the Huma
@fredcarter7003
@fredcarter7003 2 жыл бұрын
Huma regular is awesome
@bluewater454
@bluewater454 4 жыл бұрын
Good camera work on the installation. It drives me nuts when I watch someones "how to" video on a rifle and it is like watching surgery from the bleachers. Looks like you want to go max power on your Compact. I understand that FX will be coming out with a power plenum for their Dreamline rifles. Are you going to be installing the power plenum on your Tac Compact?
@Airbuks
@Airbuks 4 жыл бұрын
Yes I am lucky enough to Abel to shoot this gun full power . I will be installing a power plenum as soon as it comes in the mail 😉
@HienHoang-fi9tg
@HienHoang-fi9tg 4 жыл бұрын
Airbuks có bán về việt nam không bạn
@Airbuks
@Airbuks 4 жыл бұрын
Hiền Hoang English?
@TungLe-lv3on
@TungLe-lv3on 4 жыл бұрын
Do you ship to Vietnam she asked. And do you ship to the UK? Asking for a friend.
@narkohuntingvlog
@narkohuntingvlog 5 жыл бұрын
Nice gun brother...👍
@tonotomas8770
@tonotomas8770 4 жыл бұрын
Hi, according to your line Huma regulator FX Dreamline bottle version: https: //www.huma-air.com/FX-Dreamline ...) I did not find a tegulator for my FX-Dreamline tactical compact version. You know, because you have a FX Impact MKII rehearsal in your video
@Airbuks
@Airbuks 4 жыл бұрын
Sorry I don’t really understand what you mean . For the Dreamline tactical compact you have to by the regulator for the bottle version . There are only 2 different regulators for the Dreamline. 1: the tube version ( for every Dreamline without bottle adaptor ) 2: the bottle version ( looks like the one in a impact/crown/Dreamline)
@bonexedisantoso5131
@bonexedisantoso5131 4 жыл бұрын
👍👍👍👍👍
@kewlheadkewlhead4038
@kewlheadkewlhead4038 2 жыл бұрын
Wow nice vid! New subs here :)
@Airbuks
@Airbuks 2 жыл бұрын
Thx for the support
@flytelaw1
@flytelaw1 5 жыл бұрын
I mean the big bottle version...I think it should be the same...thanks👌❤️
@Airbuks
@Airbuks 5 жыл бұрын
Yes , as long you have the bottle adaptor this is the way to install it
@ดําF16
@ดําF16 5 жыл бұрын
it's Nice.
@Grace-qg8mk
@Grace-qg8mk 5 жыл бұрын
😍❤❤👍👍👍👍
@Radax1956
@Radax1956 Жыл бұрын
I am missing something. Your washers don't look like the drawing.
@Airbuks
@Airbuks Жыл бұрын
What do you mean ? There are different ways of stacking the washers . You have a FAC or sub 12 ?
@Radax1956
@Radax1956 Жыл бұрын
@@Airbuks fac
@franciscocarvalho2424
@franciscocarvalho2424 5 жыл бұрын
Cuantos disparos com ela é cuantos jaules
@Airbuks
@Airbuks 5 жыл бұрын
+- 35shots jsb15.89gr at 830fps
@anandbagang5124
@anandbagang5124 5 жыл бұрын
Amount
@Airbuks
@Airbuks 5 жыл бұрын
You should ask your local dealer, I am not a shop sorry 😐
@anandbagang5124
@anandbagang5124 5 жыл бұрын
Give me your whtapp number please
@Airbuks
@Airbuks 5 жыл бұрын
Anand Bagang contact me true messenger please
@anandbagang5124
@anandbagang5124 5 жыл бұрын
7628004329 my arite number please contact me
@anandbagang5124
@anandbagang5124 5 жыл бұрын
Please col me
@airaalnaira8590
@airaalnaira8590 5 жыл бұрын
Price?
@Airbuks
@Airbuks 5 жыл бұрын
You should ask your local dealer, I am not a shop sorry 😐
@wiltonlewis5369
@wiltonlewis5369 5 жыл бұрын
What is the point of doing this?
@Airbuks
@Airbuks 5 жыл бұрын
Huma air regulators are a quality product and some people would like to replace the original one of they are not happy with it . I just make the instruction video 😉
@wiltonlewis5369
@wiltonlewis5369 5 жыл бұрын
@@Airbuks I understand why you made the video, but I don't understand why some people want to change the regulator.
@Airbuks
@Airbuks 5 жыл бұрын
From what I heard some of the original regulators are have issues with creep and in some cases the Huma regulator eliminates that and there for will be more consistent
@penontonbudiman5068
@penontonbudiman5068 4 жыл бұрын
Just a dream for me 😢
@Airbuks
@Airbuks 4 жыл бұрын
I am sorry , but dreams is what people drive to accomplish great things .
@gucci350
@gucci350 5 жыл бұрын
🙏🇹🇭 Thailand
@HDHD-yv9np
@HDHD-yv9np 4 жыл бұрын
Better to use gloves so the swet from your hands won't get on the parts
@Airbuks
@Airbuks 4 жыл бұрын
Thx for the tip 👍
@lanhgia8975
@lanhgia8975 4 жыл бұрын
Mơ ước đc sở hữu e nó...
@Airbuks
@Airbuks 4 жыл бұрын
English?
@bankchanel8111
@bankchanel8111 5 жыл бұрын
คนไทยยุไหม
@anandbagang5124
@anandbagang5124 5 жыл бұрын
Please reply me
@AS-ge6xc
@AS-ge6xc 5 жыл бұрын
E a cbc e a gamo , acham que são boas carabinas, kkkkkkkkkkkkk .
@Airbuks
@Airbuks 5 жыл бұрын
English?
@AS-ge6xc
@AS-ge6xc 5 жыл бұрын
@@Airbuks Good, cbc e gamo? kkkkk FX the besth !!!
@w.callens1629
@w.callens1629 5 жыл бұрын
Vlaams accent..
@Airbuks
@Airbuks 5 жыл бұрын
Yep 👍
@agusnurwahyono8343
@agusnurwahyono8343 4 жыл бұрын
Boring.....
@Airbuks
@Airbuks 4 жыл бұрын
Thx for the feedback 👍 I suggest you watch something else 🤷‍♂️
@aronkeylfb023
@aronkeylfb023 4 жыл бұрын
You did not do anything because everyone who puts a regulator and does not try it is because it is not very good, you must have taken several shots to see its coefficiency and its precision, but apparently it is not very good that you did not 😂😂 this is how all companies that only think about selling are
@Airbuks
@Airbuks 4 жыл бұрын
Oei 😬 shame you don’t trust me 😉 not that you have to ! But I can assure you the Huma products are great and they don’t pay me for this 😉 . All the videos is have done after this one have the Huma reg installed. The video was just about the installation not the performance
FX Dreamline Multi Purpose Tune
8:11
Airbuks
Рет қаралды 16 М.
小丑教训坏蛋 #小丑 #天使 #shorts
00:49
好人小丑
Рет қаралды 54 МЛН
Support each other🤝
00:31
ISSEI / いっせい
Рет қаралды 81 МЛН
It’s all not real
00:15
V.A. show / Магика
Рет қаралды 20 МЛН
FX Dreamline: How to Add the Power Plenum
7:06
Airgun Depot
Рет қаралды 55 М.
FX Dreamline External Hammer Spring Adjuster Installation
6:46
Wisconsin AirGunners
Рет қаралды 36 М.
FX Dreamline Tact-Compact 25-50-75M Accuracy
7:50
Airbuks
Рет қаралды 23 М.
FX Dreamline UK Sub 12 Strip and rebuild.
25:43
Sub12 Airgunners
Рет қаралды 20 М.
Fx Dreamline Huma gauges replacement
4:03
Airbuks
Рет қаралды 16 М.
FX DREAMLINE | Initial Impressions & First Shots [FX Factory Visit]
20:45
AirArmsHuntingSA
Рет қаралды 139 М.
Saber Tactical chassis for the FX Dreamline installation
12:44
FX Dream-Tact Compact, A Lot of Features in a Small Package
19:12
Airgun Depot
Рет қаралды 69 М.
Fx Dreamline tactical compact unboxing and overview
9:13
Airbuks
Рет қаралды 62 М.