FX DYNAMIC BARREL WEIGHTS

[@keithrush4168]

Almost have my 600 .25 Panthera ready for the Pyramid Cup. It’s sporting the pellet liner and set up for BR only. I have most all of the same Saber assemblies you do. Always enjoy your videos. Hope to meet you at a future competition. Keith

[@Airbuks]

Hi mate , I am also looking into making a BR gun for comp but in 30cal . Love to meet you somewhere aswel 👊

[@larry11251956]

Is this barrel clocked and marked at the 12 o clock position?

[@Airbuks]

Do you mean the barrel in the Dynamic ? The barrel is marked for its optimal position but different projectiles can behave differently so if you are experiencing anomalies then I would advise to readjust it and see if you get improvements .

[@tomiliff7591]

Have you thought any further on the self indexing impact magazine? Has anyone expressed interest in making it from your design

[@Airbuks]

Yeah , I was talking to eagle vision and at first he was interested but 2 days later there where already 2 copies for sale in eBay 😔 but now it cooled down and I might pick it up again

[@murathayta3211]

So how many dynamic weights do you advise? My panthera is 5.5 700. 34 grain 1000 fps I use

[@Airbuks]

3 is the perfect amount for me

[@murathayta3211]

@@Airbuks so if ı don't use weights, what is the disadvantage for benchrest? Thanks

[@Airbuks]

@@murathayta3211 On the bench with bigger calibers .30 for instance it can reduce the amount of flip when firing a shot . Or when shooting PRS it helps to balance the rifle

[@murathayta3211]

@@Airbuks Have you got any problem with valve holder cap? ın this cap, there is 3×1.2 o ring. And this o ring stratched in very short time and leak. What is the solution about this problem? Have you got any idea? Thanks

[@hotchihuahua1546]

Changing subjects . Do you think you will be receiving the Skout Epoch for testing in the future?

[@Airbuks]

No , I don’t think so . I have seen it on IWA but they had so much attention I didn’t had the chance to speak to them

[@hotchihuahua1546]

@@AirbuksYou do such a good job I think Skout should send you one to do a review. I’m getting a 30 cal today to keep my MKII Gen 3 company . Lol

[@hankvana2149]

Hi, would you please post the factory settings from your Panthera. I just received my .22/700 (reg 150, micro 1.25, macro 2) and am curious if the settings are similar. Thanks!

[@Airbuks]

Hi , my factory settings where 135 Macro at 23 and micro at 2.5

[@davethompson2430]

What about barrel harmonics

[@Airbuks]

So far I don’t see any poi difference , I think since the barrel runs true the plenum and the shroud tightens the last part it doesn’t affect the harmonics that much but it’s worth to play with it and see if moving it back and forward makes a difference in accuracy

[@mustafakhan7953]

Will it help in harmonic tune of the rifle?

[@Airbuks]

It will change the harmonics yes , all still to be tested 😉

[@BRKGHOST.25]

Can these be used on a fx impact mk2 sniper

[@Airbuks]

It does fit inside the shroud of the impact but you will need to undo the endcap at the back , slide it over the barrel , place the weight and then screw the shroud to the endcap ( I have a picture on Instagram about that )

[@nss-diver]

I love this chanel

[@Airbuks]

Thx mate 👊

[@nss-diver]

@@Airbuks keep the good work

[@dironizareyes596]

Is it safe to unscrew the shroud without depressurization. I guess there’s no pressurized air within the shroud?

[@Airbuks]

You can unscrew the shroud without depressurization 👍

[@salemdorgham2891]

Please I want video to regulator fx impact mk2

[@Airbuks]

What do you mean , disassembly or ?

[@nico-max]

Always cleared explain 👍🇫🇷🥂

[@Airbuks]

Thx

[@mikesanchez1403]

So Im in the US are they selling any store here yet?

[@Airbuks]

Fx USA should be able to provide you with them and I have see. Some posts by Ken Hicks with these so I think that could be a option aswel

[@mikesanchez1403]

Thanks for getting back to me appreciate it love your channel A+

[@johnbeetge4137]

barrel harmonics ?

[@Airbuks]

Until now I don’t see any difference in poi , the barrel on the panther is so stiff it doesn’t affect anything

[@mwanzagoulding8355]

Can I go on the Puntero 500

[@Airbuks]

Yes at least 1 should fit , not sure

[@JustMe-xe2wu]

The rest of the world who use .177 calibre wants you to make videos of stock FX impact M3, without any addon....till date nobody dared to make a tuning videos with .177... as it is very difficult product FX has launched but forgot...

[@Airbuks]

I just have bought a 177 barrel a week ago to do some testing , but I assume you would like a video in sub 12 😬 all my guns are FAC

[@tyrantwitness2482]

Goes totally against free floating the barrel! Many remove the spacers.

[@Airbuks]

The weights don’t touch the shroud 😉 the only spacer is the one on the barrel nut . Some do remove it indeed , but since the plenum covers 50% of the barrel and stiffens it because it’s under pressure there isn’t really a free floating barrel

[@shiz8048]

so ....this little pis cost you $99 ??

[@Airbuks]

No 50€

[@dataykhan]

I don’t think so this is worth i think this is just worse

[@Airbuks]

What do you mean ? This is to balance the gun not for any harmonic tuning or so