FX Impact M3 Tuning 101

A good tune can take a long time to achieve. Patience is key in this evolving world of airguns. Achieving a great tune take time and patience, never forget that. Regulators need to be broken in, barrels also need time to adjust. As seen in my previous videos it can be frustrating when you want to shoot a specific slug and your airgun just does not want to cooperate. I tried for a good time to get my 38gr NSA slugs to work with no good outcome. But once I found that my airgun liked the 35gr NSA slugs... Well it was game time. Be patient and try different slugs, you will find the pellet or slug that shoots best for you with time.
Welcome to Airguns of Michigan, we are excited to bring you content based on Airguns and accessories. Our content is based on the best practices I know and how I achieve what I feel is the best at this time for me. Opinions vary and that is the best part as well can all learn from each other. Let’s have fun and grow together along the way.
You can get Patchworm kits and Balistol at High Pressure Pneumatics
Here are the links to the people we support and we hope you will also.
High Pressure Pneumatics
myhighpressure...
Ergo Air
www.ergoair.net/
Saber Tactical
sabertacticali...
Donny FL
donnyfl.com/
Accutac Bipods
accu-tac.com/
Arken Optics
www.arkenoptic...
RX Target Systems
www.rxtargetsystems.com
Monstrum Tactical
monstrumtactic....
Splatterburst Targets
splatterburstt...
Airgun Detectives
www.airgundetectives.com
www.youtube.co....
As always please be safe and God Bless
Moose
music by audionautix.com
Track: JJD - Adventure [NCS Release]
Music provided by NoCopyrightSounds.
music by audionautix.com

[@josephdecoteau9638]

Just bought an impact m3. I'll probably watch this video 5 more times. 👍

[@abitoutside]

Let me know how it goes for ya

[@suhailahmed3515]

I purchased my M3 a while back and was quite perplexed about tuning it. Despite scrolling through nearly a hundred videos, I still couldn't grasp it. Then, thankfully, I stumbled upon your video, which completely changed my understanding of tuning. Your teaching method is incredibly simple and effective. Many thanks and hats off to you, Sir!❤❤❤

[@abitoutside]

Glad I could help!

[@tonvanderlinden8960]

You're a great teacher!! 3 weeks ago I bought an Impact M3 sniper .25 and have shot over 1200 pellets, trying to tune the gun to the FX 34 grain pellets. I've watched the FX masterclass video's over and over again, but it didn't get me where I wanted to be. I started watching your video (over and over again) a few days ago, started tuning my gun again (finally had the balls to change the second reg) and somehow it all clicked. Now I know what 'tuning your gun on top, or just over the top of the rainbow' actually means. Dude, you are awesome!! Today, on the range, I found my sweetspot and the gun is shooting like a dream. I shot my first 10 mm (5 shot) group at 50 meter (55yards) today, and get really good ES and SD numbers (11 and 2.9 over 30 shots). The thing that put the so called 'cherry on the cake' was me changing the moderator from the DonnyFL Sumo to the stock moderator. (way less flyers) 3 weeks of stress, failure, getting myself together and trying again, came to a close and it was beautiful. Greetings from The Netherlands and many THANKS!!!!

[@abitoutside]

Glad I could help buddy.

[@OregonAirgunner]

the stock moderator helped??

[@G0F15H]

The guns don't ship with a moderator, so what do you mean by "stock?" Do you mean nothing, or the DonnyFL / FX-branded suppressor?

[@abitoutside]

​@gofish4036 umm yes they do. And not sure if you noticed but you even admit it in your reply..lol

[@G0F15H]

@@abitoutside well mine didn't come with one

[@haithemalsanea2758]

This explanation is the best in KZbin of how to tune FX, Well done

[@anthonye7216]

This is the BEST tutorial and philosophy of tuning I have seen! Thank you, I can clearly understand how to tune from scratch for any situation. Every other video I've seen either gives set values , is chasing their tail around or is describing the fine tune assuming you understand how to get everything else adjusted. Even the FX channel doesn't break it down this well. I won't even go into the chaos of trying to look through forums. You just saved me multiple tins of pellets I would have wasted trying to figure this out!

[@abitoutside]

Thanks for the kind words. I am glad it helped.

[@flbosco]

This is probably the best video I have ever seen on how to obtain harmony between reg 2 , hammer wheel, micro hammer adjust and valve adjust for a desired speed. Once this is achieved the speed at which the gun has achieved harmony may or may not be the speed at which delivers the best accuracy . Ex .22 slug nest accuracy between 930-950 fps. This video is outstanding !!

[@abitoutside]

Thank you

[@FreeFloridaAirgunner]

Finding that perfect combination is key. I've over pressurized my Maverick to the point where the projectile speed decreased as I increased the hammer setting. And someone else's tune should be used as a guide, each gun is different. Your explanation gives EVERYONE a guide to achieve the desired results. More speed usually means more air, more air means less shots per fill. The goal is to find that balance between ACCUARCY and SHOTS PER FILL. As you mentioned, wasted air actual diminishes accuracy by pushing the pellet outside the barrel without guidance from the barrel twist. Keep it up, there are always those that think they know better, but there are more of US that appreciate your efforts to achieve maximum accuracy without over stressing the system

[@abitoutside]

Yep

[@stedyone1090]

Well said

[@kiteboardkid]

and in the UK :-) Keep it up Moose, love this method of tuning.

[@wilf9697]

Clear and precise, how refreshing to make sense of such a complex and complicated rifle. I loved the part about maxing out every thing so you know when the hammer will not actually engage. Great video. Thank you.

[@abitoutside]

Glad you liked it.

[@macsteer45mac96]

Great vid, watched so many other video's and all they talked is what they like to do and never explained just how it actually works just the facts on how to.....Great Job.

[@abitoutside]

I appreciate that!

[@KPMVAB]

I must say that this is the best explanation of tuning the FX Impact I’ve seen. Love the way you get in deep but not too deep of explaining the tuning process. I just found your channel the other day and boy am I glad I found you. Keep ‘‘em coming. You doing a great jobb and don’t let anyone else say otherwise. 👍👍👍

[@abitoutside]

Thanks buddy, I'll keep them coming

[@georgegandara6054]

I am not an expert at all just a humble enthusiast, learnig a lot with every new review, thumbs up sir!!!!

[@bmaryniak5]

I've had my fx m3 for about a year now. Watched Ernest tune his impacts and whiskey 68 and just dozens of others. Your video just gave me that ha-haa moment. And I was a able to tune my gun with confidence. Maybe its because I grew up in Michigan but now live in Arizona that your explanation hit home. Thank you. I want to show my appreciation by how to improve accuracy by clocking your barrel that is rarely talked about, a real game changer if you know how. I won't go into detail, but your fx viewers need to know. I'll explain how if you don't know. Send me a reply

[@DeaganZ3488]

Reply

[@sallutz]

Just bought my m3 in .25 cal, compact model. Your video is outstanding and I look forward to following your methodology once I receive my rig in a few days. Thank you Moose.

[@abitoutside]

Have fun!

[@mikekrzychylkiewicz7948]

The best video on tuning the M3. Hands down. Got my groups super tight by just following your advice. U are a legend.

[@abitoutside]

Thanks Mike I do it for you all

[@landonritchie9886]

Finally. An excellent video that explains in detail about tuning the M3. I just picked mine up from HPP the other day and I was extremely overwhelmed trying to understand all of the adjustment points, what does what, etc. So, as a new dude, thank you.

[@abitoutside]

Glad you enjoyed it.

[@cnchobbyist991]

I have a M3 and finally I now know how to tune it. You got yourself a new subscriber!

[@waynesexton8621]

You made tuning my impact 3 in 22 so easy. Thank you. The best and easiest to understand video on tuning that I have found. Thank you!

[@abitoutside]

Very welcome

[@yourotherleft]

I'm so thankful I found this video! You explain it well and make it so simple to understand. I owned two FX Impact Mk2, watching FX masterclass video again and again for years but didn't get me anywhere fast, wasting so much time and lead. In fact, it makes me hesitant to try to tune it. Not anymore. Subbed!!

[@abitoutside]

Glad it was helpful!

[@sorenso]

I agree with many of the other comments. This is THE BEST tutorial for tuning you FX Impact M3. Thank you so much!

[@abitoutside]

Glad it was helpful!

[@vascolopesdasilva4161]

Thank you, probably the most useful piece of information that actually makes sense on tuning the M3. Currently I am wasting air but did not understand why! Will definitely give this a try.

[@abitoutside]

Glad it helped

[@rimcroy]

Awesome tutorial! It gave me the confidence to upgrade from my .22 Dreamline ( 1st PCP) to a .30 Cal Impact. I spent hours tinkering with my Dreamline and learned allot but your tutorial helped make all click. 😀

[@abitoutside]

Glad it helped

[@glenpearson6959]

Absolutely brilliant way to explain tuning the M3, helped me to understand it much better. Thank you

[@abitoutside]

Glad you liked it!

[@barrywruck2266]

Good explanation, easy to understand

[@abitoutside]

Thanks

[@robinsonsitompul9362]

Thank you for the tuning video... Eventhough my m3 is 177 but as you said, it is all the same principle for tuning.. Now you get a new subscriber from indonesia... Thank you again and God bless you and family...

[@abitoutside]

Glad it helped

[@JAVBigBadVinny]

Thank you Sir, I have trawled all over the internet for this information and finally found it all in one place. Fantastic 🙂

[@abitoutside]

Glad it was helpful!

[@deeellis1953]

Thanks.... a compete instructive video in simple terms. Now, after a year, I understand.... makes sense finally. Keep it up.

[@abitoutside]

Thanks buddy

[@Don.E.63]

Great video Moose, thanks!

[@abitoutside]

Glad you liked it!

[@JacksonCooper-m1b]

The best explaniation I have ever seen. Thanks so very much!!! I have an FX impact mark ll and have never tuned it since I purchased from Utah Air Guns. 25 cal slug liner shooting pellets and slugs on the orighinal tune. Again perfect explanation. --Jackson

[@abitoutside]

Thanks buddy

[@Tunnelrat6666]

Great vid thanks this is going to help a lot. Dam it was hard to watch that M3 balance with one leg off the table. I dropped my M3 the same way only days after finally getting one punched the barrel out the back of the power block.

[@pabuffa]

Thank you. I was messing around with my .25 M3 today. Could not get 43.2 grain NSA slugs above 820. Now I know why. I was doing it all wrong. I will be rewatching to start over with my M3 once I refill it. Awesome teaching video. 👍🏻

[@abitoutside]

Anytime, glad it helped

[@toddroy9558]

I don’t even own a gun and never have but want too. I understand just what you are saying, good teacher. Thanks

[@abitoutside]

Well thank you sir

[@pabuffa]

Rewatched today after setting my reg1 to 175 and my reg2 to 135. Trying to achieve 925-950 fps with a NSA .25 43.5 grain slug. Improved from yesterday's 820 to today's 860 but still not there. Now I need to go back thru your recommended steps. Start Macro 16 , micro to sear engage plus two clicks, Valve all the way out. Interesting observation. Once the above is set, work back to front on the gun. Macro - Micro - Valve. Can't wait to work this and see my results. If I can't achieve my fps, I won't be disappointed as I know the gun will be set up as well as possible. P.S. Born and raised in Michigan .... Thanks again!

[@abitoutside]

You will need higher reg pressure, also you may need a heavier hammer.. Do not use that heavy Tungsten. Huma tuning hammers work fine

[@pabuffa]

Thanks for the advice. I am going to see where this leads for velocity and accuracy. If I can't get close, I will up the regs and start again. Thanks again!

[@fuselman91]

Great video in explaining tuning.

[@stevenbattell4014]

If I'd have put my rifle with the leg missing the table like that mine would have fallen off lol, this is a great tune guide thanks you.

[@abitoutside]

I didn't even notice, im glad mine didn't fall!

[@josephrickard7973]

Lol. I had anxiety watching it the whole time.

[@andyfreeman2343]

Thank's , most in depth explanation on tuning I've seen . Really clears things up on how to get started .

[@abitoutside]

Glad you enjoyed 😉

[@BinNe3man]

The best explanation ever 👏👏👏👏 Very clear and direct to the point

[@abitoutside]

Glad it was helpful!

[@williamaldridge5104]

Great summary. Thanks. This video makes the process clearer to me.

[@abitoutside]

Great to hear!

[@adrian-soto]

Great video, very informative, and your passive-aggressive way towards Karens and trolls make it a lot more enjoyable haha, long time follower here. Hi from Costa Rica! keep those videos coming.

[@abitoutside]

Lol, ya Karen's crack me up and are great to make fun of

[@saviour514]

Great video

[@jasonjones1720]

Really appreciate your explanation of the system. Makes complete sense now! Thanks Moose!

[@abitoutside]

Anytime buddy, glad it helped

[@JamesJones-jg9wj]

Good video, thanks for taking your time to try and help others, greatly appriciated!

[@RJMHuntingAustralia]

Just Subscribed. Thank you for the video mate. I personally got a lot out of it. Finally someone explaining things in terms the average Joe can understand. 👌

[@joeschmitt8694]

I've been really liking the amount of videos you've been creating. Great having new stuff to watch. Thanks!

[@abitoutside]

Thanks

[@arnierawleigh1543]

Thank you good explanation 🎉

[@richardginder6680]

Great explanations! Thanks.

[@abitoutside]

You're welcome!

[@tomlongbow]

Best Information I have found so far. Thank you very much and Greetings from Germany 👍🏻

[@abitoutside]

Glad I could help

[@morewind11]

Outstanding explanation...keeping it simple!

[@abitoutside]

Yep, no need to complicate

[@chrisfigueroa3361]

Yup I agree on the way you tune your rifle that's how I do it I go for a fps like 885 fps but I take it to 915 to 920 then back off till I hit 880 to 885 just like you said brotha thanks for sharing bsafe buddy 👍

[@westerncanadapestcontrol2483]

Great video moose it has lots of great information Very well done keep the videos coming

[@abitoutside]

Will do

[@rudychavira5558]

Sir I have my power wheel set at sdifferent settings for 3diff pellets but its shooting rear well, and your video is the best I've seen thanks for your work helped alot, now for some fine tuning, thanks again

[@abitoutside]

I am very glad it helped. It's why I do what I do!

[@rudychavira5558]

@@abitoutside sir so if I have power wheel set for fps I like, do I turn valve gradually until it changes then same for micro wheel?

[@abitoutside]

Micro then valve

[@Jskd06]

Excellent explanation and tutorial, thank you!

[@abitoutside]

You're very welcome!

[@gudendk]

Just got an M3 - this was very informative, thanks!

[@abitoutside]

You are very welcome

[@brettnixon113]

Thanks for sharing I will need to watch this a few more times for it to sink in

[@lectro88]

Bubba I like the way you told the keyboard experts and Tubey to pound salt right outta the gate,. Thumbs Up all the way.. I'm not an expert nor do I claim to be,. If I was I wouldn't need to be on your channel. (almost was gonna make a Funny out that)but I'll save it. You may remember I just bought a Panthera and is my 1st. FX and Tuner. Anyway mine is still on a truck and I'm just grazing while it's moving. I doing the how much mud is sticking to the wall deal. Think I got a good Idea how to proceed and where to start. I just need a pile ammo and still day. Cheers.

[@abitoutside]

Thanks, make sure to let us know how the new pew does

[@hughdolben6010]

Best video on tuning ive seen ,nice one

[@abitoutside]

Thanks buddy, that means a lot to me.

[@jimbundy8449]

Great explanation! Straight forward! Thanks 👍🏼

[@reddyksl7213]

Fantastic explanation of the concepts of PCP system. Great job. Pls request you to publish the approximate speed for good accuracy of FX Impact/Crown with different caliber and grain pellets. I am asking for too much, but you are the best guy to do this ..

[@abitoutside]

Honestly, most Diabolo pellets fly best at 900-920 fps.

[@jamesperkins343]

I agree with Anthonye7216, your explanation was very clear and descriptive. Thanks

[@abitoutside]

Thanks for watching!

[@argirismarmaras5142]

Great job! Τhanks.

[@abitoutside]

Thanks for watching!

[@viper2a]

Very informative video!! thx.

[@abitoutside]

Glad you enjoyed it!

[@jeffkuehn107]

thanks for this video. Finally I understand the tuning better.

[@abitoutside]

Glad it helped!

[@jeffkuehn107]

@@abitoutside just wish i had some basics to start the speed for a certain slug weight

[@abitoutside]

Depends on slugs, but start around 940 and go up till groups are great.

[@iantcroft]

Great video. The two set points you need to decide when you start are, the speed you want to achieve and the weight of the projectile. Then when set up efficiently try different projectiles of that weight as some will group better at certain speeds and certain barrels. Endless tinkering!

[@johnfire4099]

Don't give a sh@!t for those haters buddy ! Your way on tune is the most common out there... It's what most people must do when they buy a brand new FX air gun So keep doing your great job ....

[@abitoutside]

Right! Thank for the boost

[@paanglin]

U da man A.

[@elmagnoon2]

Excellent tutorial

[@abitoutside]

Thank you! Cheers!

[@allenhaymond5934]

Good video my man

[@abitoutside]

Glad you enjoyed

[@allenhaymond5934]

@@abitoutside ok thanks

[@JohnHowerton223]

Great video Moose. When you got to your hypothetical 110 bar and 9PW for 915fps, could you creep your reg up to say 113 so that you could re-max your PW to 16, just above your desired velocity say 930… then creep the valve back just a little bit or click the wheel one click to 15 until it gets back to 915? I’m no bench rester by any stretch and barely have time to test, but I like having ALL the adjustability I can so that I can shoot like 3-4 different projectiles. I also I shoot in 40% humidity and 100% humidity in the same day or even hour! For example I shoot: - 14.3gr on PW1 at close range for small creatures @ 950-970 (I know too fast) - 18-19gr on PW8 at I think @ 910 - 25gr pellets PW16 @ 915 - 22-25gr slugs on PW16 between 900-1000fps for longer shots. I have such huge swings in temp, humidity and elevation where I shoot that I find my speeds can vary shockingly and use that adjustability to get back to harmony. This is what I’ve been doing. All that basically only touching the round knob. I’m sure/know I’m not optimized for anything, but guess my question is… I don’t want a worthless #10-16 on my wheel. I really love the versatility that the Impact platform can afford. Am I missing something? It seems to work. I AM ASKING, not just trying to tell you what I do. I’m really new to PCP stuff but have a good grasp on firearm stuff in general.

[@abitoutside]

Absolutely, this guide was intended to get people roughly where they should be. Minor changes are what we all need to do to accomplish our goals

[@user-lt7kc2zr1d]

Just Purchased an FX Impact MK3 Sniper FAC in .22 cal and found your video on the Tuning for 18.1gr Pellets very informative. I was just wondering what your first regulator is set to. I currently have mine set at 150 bar. Regards David

[@abitoutside]

30 - 40 bar more than second reg

[@bobjoatmon1993]

Note that I'm using a 6" phone, not a bigger tablet, notebook or PC and I couldn't see the writing on the brown cardboard. Maybe get a whiteboard at Wally world?

[@abitoutside]

Already did. I thought the same thing

[@kirbysands3197]

Im looking to getting into the airgun world and watching aas much as i can as to learn about these guns. I have watched a few different tuning videos and i understood exactly how you explained each step very well. Thank you so much for such a well made tutorial on tuning. Cant wait til i can put my order in for my FX.

[@tkielek24]

Best channel with airguns!!!!!! Great job 👍 Happy 4th of July GOD bless You, 🙏

[@abitoutside]

Thanks and God Bless you also buddy

[@ronaldpierattini6909]

Very good video, congratulations. I have a question. It is true that when setting to maximum, you should clearly hear how the plenum fills with air or that depends on each rifle. And another question is what is the range of a good standard deviation? greetings and thanks

[@abitoutside]

Thanks, plenum sound never concerned me. Also less than 3 is sufficient less than 2 is ideal

[@Craizg35]

Def earned a sub here. Thank you sir, excellent job.

[@Kashmirwithlove]

19-22minutes is the gravy.

[@airpower7692]

Made me nervous with that bipod leg hanging off the table 😂

[@abitoutside]

Lol, didn't notice

[@rickschmitt7052]

Funny, that's all I was looking at too! Bet if it fell I'd hear you scream all the way here in White lake. Great video

[@abitoutside]

I miss Clarkston some times, but up north is awesome

[@drweip2892]

THANK YOU SO MUCH!!! As a noob, this is PRICELESS! (But $10 is a start!;))

[@bigfranksworld]

Interesting way of tuning that I haven't seen before. It does make sense, when you think about it. Thanks for the info. Now I need to get out there and give it a try with my new M3! Subscribing!

[@abitoutside]

Yea man, go get it.

[@bigfranksworld]

@@abitoutside scope just showed up a day ahead, so mount it today, and tune tomorrow morning before it gets too hot. 107° right now at noon.

[@carlosaguilar7793]

Wow wow can’t believe how much out of tune my riffle was can’t thank you enough.

[@abitoutside]

Hope it gets better

[@carlosaguilar7793]

@@abitoutside it is I did not go to work I’m out shooting got my first sub Moa group just now dialing in some more

[@nealeash1445]

Very easy to understand!

[@airgunmarksman726]

Great vídeo my friend 😉💯 Best regards from Portugal 🇵🇹😉💪

[@OPiBoO]

Initially let the highest hammer spring be 16! You have not advised the anti-discharge spring, so let the tension be the highest or the lightest

[@abitoutside]

😀 nice

[@starlightHT]

After watching the whole video I can comment. As I don't have an Impact. But I have a rti prophet that I maximize the hammer until it doesn't increase the desired speed anymore and I give the regulator a sniff to lower it about 10fps. With the wildcat mk2, I tuned the regulator to 135bar and I worked with the hammer until I reached perfection at 20 meters, then I saw the speed. With vulcan3 I can only tune the hammer so I go straight to 20 meters to perfection. Only then do I see the results at 90 meters. Rti and wildcat all have 135 bar regulator. The wild with 60J (not max hammer, about three full turns less) and the rti with 70J.

[@mustafakhan7953]

Well explained sir 👍

[@airriflehunter87]

No right or wrong way as long as your achieving what you want then what’s the issues ? Always people there to put you down. Keep up the great work. Enjoyed them all

[@zacharyperkins8067]

Awesome! I subbed! Question- I want to tune my .25 FX hybrid slugs in my 600mm M3 Impact pellet barrel. 1) Should I turn the barrel to the slug port, and 2) Should I start with the 100 bar (second reg pressure), or do you recommend starting higher?

[@abitoutside]

Thanks for the sub buddy. Yes the slug port and 100 might be ok to start, doesn't hurt to start lower to find that sweet spot.

[@zacharyperkins8067]

Thank you! @@abitoutside

[@Douger318]

the sehkment gaugesure helps as it tells you how much air used per shot how accurate it is but good way to tell

[@abitoutside]

Yep, I have them on my Maverick

[@phillipbrown3265]

Thanks Moose love the video could you do one on the maverick every one is doing the m3 and the maverick seems to be forgotten thanks Ps I love the way you explain tuning

[@abitoutside]

Sure I will do one on the Maverick

[@bobjoatmon1993]

@@abitoutside YES please

[@compressed_precision]

Great Info brother!! 👍💪

[@johnnyventurino8947]

Your a good man Moose happy 4th bud.

[@abitoutside]

Thanks buddy

[@Quagm1re]

Great video. I will admit to feeling anxious with that bipod leg hanging off the table throughout the video..lol. Disaster averted!

[@abitoutside]

Lol, I had no idea

[@Craizg35]

OMG!!! I was thinking the same thing!!! I was a nervous wreck the whole time it was dangling out there. LMAO!

[@mikewilliams6522]

Is that better then the 20-30fps over your speed then use the valve to bring it down to what you want? Because this method you showing now seems so much easier then the 20-30 over thing lol

[@preyingmathis2517]

Whenever I see tunes for the M3 that have the hammer wheel set at 16 I always make this face 🤔.... I was surprised my M3 tune from the factory was set at 16 because FX claims that their factory setting is efficient. Great job on explaining the basics. I really enjoyed this video. Which .30cal pellet do you find to be the most accurate in your impact? What speed?

[@abitoutside]

44gr FX pellets at 920 for bench

[@pavernater]

Great video, appreciate it

[@abitoutside]

No problem 👍

[@josephrickard7973]

Everyone is right Moose best video for tuning the M3. I've been fiddling with mine for weeks. .22 cal with the 800mm tension barrel. Tried javelin, NSA, zan, H&N. from 28 grain to 33 grain. Can get any good groups. I put the stock 700 mm barrel on. Seems a little better. My question is, what speed should I be looking for. Some say 930, some say 1,000 and in between. The best I've got so far was the NSA 28.5 gn at 950. 3/4" group at 50 yards. Not impressive. I'm setting this up for PRS for the northeast air gun classic. I was hoping to shoot 32 grain or so thinking it might help more in the wind but I'm pretty new at this. Any input you want to throw at me would be awesome. Thanks.

[@abitoutside]

Anything less that 35gr should be a superior liner. Slug liner for over 35

[@jmel81]

This is a fantastic video on tuning the best I have seen so far, I just have one question though if I want to change the pellet speed say from 920 to 895 will I need to repeat the tuning process from the start?

[@abitoutside]

Ot necessarily you can use the valve adjustment alone to correct this small change

[@jmel81]

@@abitoutside Makes sense, thank you for that reply

[@timc5922]

Nice job!

[@allenhaymond5934]

GOT QUESTION I GOT A FX WILDCAT MKlll 22cal my pellet pellet probe screw broke so I had to replace it was wondering if there was a adjustment for the pellet probe carrier because my cocking is not as smooth

[@abitoutside]

I would need to see it to assist with that one, sorry. Try to find a local shop and see if they can help.

[@gerhardpotgieter9091]

Watched this video allot over and over and i do get the speed and the very low es and sd and after doing everything you show me, my gun still don't shoot accurate at all. I know i miss something😢😢

[@abitoutside]

By your other post I am guessing 22 caliber and slugs. If so we all struggle with that

[@DanielGarcia-zw8nx]

Wish I could have a fx airgun just don't have the $ but i just got a A.V. avenger 22 wood and out the box already having regulator leak. Reg. set at 2200 over night to 3000. this will be my second avenger. Not impressed at all frustrated as hell.great job explaining you tuning method 👍

[@josephrickard7973]

Hey Moose, I really appreciate you responding to me yesterday. I had something else if you had a minute. I put the stock 700 mm barre backl on the .22 M3. Seems to be a little better. My question is, what speed should I be looking for? Some say 930, some say 1,000 and in between. The best I've got so far was the NSA 28.5 grain at 950 FPS. 3/4-in group at 50 yards. Not impressive. I'm setting this up for PRS for the Northeast airgun classic. I was hoping to shoot 32 grain or so slugs thinking it might help with the wind but I'm pretty new at this. Any input you want to throw at me would be awesome thanks.

[@abitoutside]

That is a question only testing will answer. Normally I find that 980-1000 is best for most slugs. However, it can sometimes be lower speeds.