FX Impact M4 Tuning Series (.22 cal) Tune the FX M4 (FX Factory Tunes)

[@rmoreno6014]

ABSOLUTELY BEAUTIFUL! I've been wanting one for the past 3 years. Cant seem to pull the trigger on it, cause $2000.00 is alot of money, and the wife always convinces me to use that much on something for the house.

[@AirgunChannel]

You don't loose your money when you buy an M4. You can always sell if for just a few $100 less than you paid. It's an investment in yourself.

[@ΑΓΓΕΛΟΣΣΙΜΑΤΗΣ]

Στην Ελλάδα μπορώ να το αγοράσω????❤❤❤❤❤​@@AirgunChannel

[@williamwilson2624]

You did a great job of simplifying the tuning process. Excellent video!

[@AirgunChannel]

Thank you! I finally figured it out!

[@MongtoLagula]

how many shot per fill

[@jabugga]

Looking forward to the .30cal video!

[@AirgunChannel]

Me too!

[@gutiguti3914]

Excelente video como y muy buenas pruebas y el FX M4 un lujo 👍👍👌👌👏👏🧉🇦🇷 saludos y a seguir así 👍

[@AirgunChannel]

¡Gracias! Disparar y poseer el M4 es un lujo. ¡Tengo suerte de tener uno!

[@gutiguti3914]

@@AirgunChannel 👍👌👏🖐️🧉🇦🇷

[@mykhaylostetsyuk8017]

Very informative video, grat job. Questions, I just received my m4 today, I'm planning to shoot slugs. Do I have to change the probe, or I can use the one came with? Thanks.

[@AirgunChannel]

That I don't know. Call Talon Tunes or Utah Airguns or go on Airgun Nation for that answer

[@airriflehunter87]

You don't need to change the probe. Better air flow with pin probe but I find the gains minimal for the hassle

[@billhatcher2984]

When shooting slugs do you need a special barrel or can you use the same one

[@AirgunChannel]

Not sure. You can use the same one but they may have slugh barrels with different twist rates. Call Utah Airguns

[@bloodops3751]

Great job

[@AirgunChannel]

Thanks man!

[@caseyjones6197]

Good video. My M4 will be a dedicated slug rifle. I’d be interested in a slug video. Also try about 930ish fps.

[@davidt9411]

Does the M4 stock also shoot slugs this well? Or do you have to buy a slug kit for this rifle also with the heavy hammer

[@AirgunChannel]

It already has a power block installed...so just up that Regulator to shoot slugs. Don't adjust it past 170 bar though.

[@jonasschaeferjunior7274]

It would be amazing if they can put the phantera plenum on an m4, to bring all the power that the system can achieve in a more compact chassis with a longer barrel, etc.

[@TsRide83]

Now need one with slugs turning video

[@AirgunChannel]

Shooter 1721 shoots those. I'm not sponsored by FX...so I can't really afford slugs.

[@chrischattergoon47]

Hey could you do a video with the m4 in .177

[@AirgunChannel]

Sorry, but that will be the last of the series...so for sure, but probably in 3-4 months. That's the only caliber they didn't send me, so I have to buy the barrel kit.

[@chrischattergoon47]

@AirgunChannel Ok I understand thanks for the reply 👍

[@heneryhenery]

what kind of scope camera do you use

[@AirgunChannel]

The Side shot. It's the best I found so far. Works with my galaxy cell phone and all cell phones

[@andy545i]

Very useful video, thx. Looking to buy a quality modular rifle system. Short listed the FX M4 and Epic Two. Anyone have any bias towards either of them?

[@AirgunChannel]

Epic 2 is sold my Edgun West and those guys a super creeps. Really horrible human beings. Go with the M4.

[@OriginalThisAndThat]

I want confirmation for a question. Is it ok to lower reg pressure (M4) when uncocked by turning to clockwise 1/4 turn at the time or does it destroy something? Or how to adjust that reg pressure lower if you cant do it like this? I know you can open it, but by closing it, manual says dont do it when under pressure. So how should I read that? Is the reg under pressure all the time when tank is connected, or does it mean that you can adjust it uncokced so its no "under pressure/pressurised"?

[@AirgunChannel]

To be safe then you alwasy lower the reg with no air in the gun and then raise it under pressure., But if the manual says you can turn it down 1/4 turn with air in the gun, then you can. But it's best to just remove the tank, Fire in only once if there is air in the guage, and lower the reg belwo where you want it set. DONT FIRE with no air in the M4, will void warranty. Fire a few shots to settle the regulator.

[@dennisgardner7991]

I turn my regulator up and down all the time uncocked with air in the tank. I haven't experienced any problems. When I turn CCW I watch the gauge and I can fine tune the reg from say 88 to 89 pretty easily. If I want to go down a bit I turn CW but hardly any movement at all - 1/32nd of a turn or so. Fire a few rounds for it to settle and then read the results. You can get a pretty fine result like 1 bar down that way. In the vid he seems to think something is wrong with his macro wheel when he turned it from 16 to 1 and the micro jumped. It doesn't hurt anything but will move the micro a little over 1.5 numbers all at once - a big jump if you're not ready for it.

[@bigeclipse718]

What distance were you shooting?

[@AirgunChannel]

That was 38 yards, 68 yard shooting here: kzbin.info/www/bejne/nXnQl5l3aJigb9E&pp=ygUMZnggbTQgcmV2aWV3

[@chopperg9443]

I'm getting the FX M4 .35 Copper (small game) and the Western Rattler .45 Long Strike to cover all the bases. Unfortunately, they're on backorder at this time.

[@AirgunChannel]

You will be set!

[@NM-x2t]

ist problem you don't adjust the reg down with it pressurized that reg will be needing some help soon !

[@AirgunChannel]

I have never done that s my reg is fine.

[@NM-x2t]

watch you video .

[@SyifaSfya]

👍❤

[@AirgunChannel]

Gotta love the M4!

[@brettellis1837]

Very nice.😂

[@georgetripp6727]

Is the air gun channel strictly FX products

[@AirgunChannel]

Huh? Get with the program dude! www.youtube.com/@AirgunChannel/videos

[@georgetripp6727]

@@AirgunChannel OH I see it's just expensive stuff. I'll pass.

[@Addicted2Fun]

@@georgetripp6727lol this whole hobby cost money! Gtfo and go back to pumps

[@WidiPrasetiyo-ej4dh]

A gift for me who is in Indonesia FX m

[@Melskeh]

Heeft er iemand, die een FX Impact heeft, een Power kit geinstalleerd. Zo ja welke?? Ik hoor een verhaal dat iemand een 26 grams Tunsten Hamer erin heeft gezet. Voor mijn M4 Extended 800mm .22 wil ik dat ook omdat de snelheid van de zware slugs 40grain die ik wil gaan schieten te laag is. Met 145Bar op de Regulator haal ik maar plm 245 m/s of plm 800 ft/s dat zou voor de 40 grain Slugs plm 1025 ft/s moeten zijn.

[@dougbreese613]

Slipping on trigger every video.

[@AirgunChannel]

Say No to Drugs.

[@lopan776]

So can a felon own these legit question ❓

[@AirgunChannel]

Yes, for sure it's OK. Get one of these: kzbin.infoEx94Ys3S65I?si=tBJ--3k8ohOpf9M_

[@lopan776]

@@AirgunChannel thanks for answering I like the setup you got. Definitely considering buying an air gun