How to Disassemble the FX Impact - FX Masterclass

FX Masterclass -World-renowned airgun smith, Ernest Rowe, shares a lifetime of airgun knowledge. covering everything from basic airgun maintenance to a comprehensive step by step repair tutorials. ** Table of Contents Below **
In this Episode, Ernest demonstrates how to disassemble your first-generation Impact.
Table of Contents
0:28 - Degas Rifle
1:49 - Upper Removal
4:10 - Reloading Assembly
5:01 - Valve Assembly
8:51 - Trigger Assembly
10:04 - Regulator
12:28 - Bottle Adapter
For a detailed schematic of the FX Impact, follow the link below:
www.fxairguns.c...
To order parts www.fxairguns-...
If you have a specific tutorial you want Ernest to do, please leave them in the comment section below.

[@hankvana2149]

Thanks Ernest, waiting for my Impact to arrive - now I don't have to take it apart to satisfy my curiosity as to what is inside - you have shown me already!

[@Navigator777777]

13:15 Bass adapter. My Mk3 was working flawlessly on October 22. I switched from the .30 barrel to the .22 so I could compete locally. November 3, it started snowing. We had snow on the ground for another 5.5 months. Gun was stored in the case. I opened the case in April. Was saddened to see no pressure. Pumped it up but I could tell it was leaking. I could put my finger over the counter sunk area of the Bass Adaptor apply pressure and release and could feel it pop a little. I didn't know what it was called, how to safely empty the gun or what to do but thanks to this video, I do now! Thanks Ernest.

[@Navigator777777]

Fixed it! There was a metal sliver in the o-ring. I bought one of those FX O-ring kits. Back in service!

[@jackdaniels7913]

Way farther than I ever hope I need to dive 😅 but I know the day will come and I'll be thankful for this video! 🥃cheers🍻

[@nuangel]

Fantastic ! An interesting topic for another video would be addressing common trouble areas with the rifle and how to solve them.

[@korbendallas4345]

Thank you, would be nice to have scheme of seals installation and undesrtanding how often they should be replaced. Do you have any maintenance schedule, operational requirements?

[@edosancl]

ufff I need to see this video at least 5 more times! what a great info, very complicated air gun (for the most accurate one)

[@weirhauch1002]

Complicated a lot

[@John-ee4ki]

Just wanted to say. With the exception of "modified" vise grips, very tool friendly. Not a machinist but been around the trade. BUTEFUL! (SP NOTED).

[@mrgoldminer49er]

Can’t imagine Air Arms showing you how to disassemble one of their guns and then inviting you to tune it up 😄

[@shawnsponds]

Air Arms doesn't have to show you how, Their guns are so much more simple and better built

[@DocMustafa]

shawn Debatable. Also no, it’s just that because of the complexity, it requires you to be careful. It’s like a Mercedes.

[@22lr_plinking]

Is there video for the impct mk2 with power plenum? Or basically same as this video

[@paulomarcoa]

Thanks master, now we expect the same from FX Crown!

[@allenhaymond5934]

My FX impact mkIII is leaking around the bottle adapter in video you said it was torque down so if I need to fix the leak is it ok to remove it myself and what is the torque setting for it

[@whiteykauai]

where or how can we make that removal tool for the reg?

[@timothyjohn3006]

Great video Ernest, what size Allen key's do you need for the full strip down? Many thanks, Tim.

[@chenglo8999]

Im about to do a disassembly because for some reason, the hammer adjuster hex screw assembly is completely loose! It can slide back n forth with a flick of my finger. Any tip on what part ciuld have come loose or broken?

[@jorcileisousaresende1397]

Ernest muito bom este tutorial de como desmontar a IMPACT

[@provisoriopcpcaseira7814]

very good video when i buy mine i will know how to move

[@sugriv3405]

Watching this now I'm sure I'll never be able to re assemble it again 😉😊🙏

[@huntergameson9665]

Hi Ernest, how do you charge the plenum after you scree back on the bottle?

[@neil1058]

It's not a trigger shear ....the correct term is sear. A great set of videos. Have watched them all Neil .25 impact owner.

[@marcooliver48]

Hi there Ernest I have a question about the mkii pp working pressure valve I want to put in mine a New botle in 350cc and 4500 psi the question is can use this botle at 4500psi or 4000 psi or not? Im glad to learn here. Have a nice day

[@farooqjamatee]

Great sir

[@luisheredia1256]

A donde puedo llevar mi fx impact x, para revisarlo? Por que ya perdió potencia

[@FXAirguns]

Your dealer should be able to help you out with that .

[@biagiocozza2933]

Well done. I can see you've done this more than a few times.

[@gorankovacevic1669]

Great video. Also it would be nice to make video for comlete disassembly of Crown barrel.

[@FXAirguns]

We have an Impact X barrel video in the works.

[@gorankovacevic1669]

@@FXAirguns Great news👍

[@lukeshoot]

thank you very much... no service center for fx impact in my country, so this is a big big help.... question, is there any list of spare parts that is prone to broken over time? may need those in hand when buying fx impact, since again no fx impact service center in my country...

[@nongthangthouanojam2194]

1:23 My valve is unseat how do I fix it

[@Capodona1980]

What drill is that with what bit

[@bophoto]

Hey Ernest, how do I rebuild the FOSTER fill valve?

[@jackagain8346]

@Bo Lorentzen Degas your gun then go to the 8:50 mark. Just take off the trigger guard and screw it out. You will need to replace it with a new one. These have a check valve built in and can be repaired though. This might work: kzbin.info/www/bejne/f52tnGiDor-EnaM

[@cuabnoogyugnoog-birdshomec87]

I would like to buy this airgun. But I am from LAOS. How can I but it?

[@FXAirguns]

You can find our international retailers at our website, FXAirguns.com/retailers

[@کوروشکبیر-ح3ط]

عالیه ای کاش از روش پاور پرنیوم هم باشه

[@cleydermancanedo2030]

Um equipamento extraordinário porem para nós aqui no Brasil ela tem um preço muito alto.

[@Hipporider]

Forgive my ignorance, but it's this the Mk2 or Mk3?

[@juancarlos-rf5ko]

How to know which generation corresponds to my regulator?

[@damianrivero5598]

Hola que tal, tendras algun fx impact Mk2 en venta Saludos buen video...

[@sid8556]

En que pais vives ?

[@wahyushooter15]

Waaaoow fx impax😍😍

[@AndreysantanaD]

Carabina muito bom nota de mas eu creio que ela é muito ponte

[@nacaosuvlog6149]

Can you please show me the detailed drawing?

[@jeremyrayner1644]

brilliant

[@CygnusX250]

how do you degas the bottle

[@petter5721]

Well made Gun!

[@finforcer]

Can you bleed the the regulator same way on the crown by turning the reg.adj.screw?...and if, does it need to be adjusted to specific bar setting (like 135bar like mine is) during the refilling?

[@ptigptig]

Master... I have the Panasonic driver like yours, Can you tell me where to get the metric allen key bits that you use with it. I'm looking for the same ones that will lock into the Panasonic driver Collet. Thanks.

[@CygnusX250]

thorp mip makes the best tips....also snap on tools have some good tips, i prefer mip's though (any rc hobbyshop will have them)

[@mark_tile-man]

Does the impact come with a spare set of all the rings?

[@FXAirguns]

No, they do not, you can order all O-rings from FX USA by calling [phone]

[@CDOO2391]

For $2000+ USD, they should come with a spare set.

[@mark_tile-man]

@@CDOO2391 yep I agree. I bought mine 6 months ago and the probe catches on the mag. Got to take the probe out and file it down 🙄

[@sentryking7961]

Do you manufacture the .177 impact with smooth bore

[@doha-198s]

How much is it? And how to buy? Sb shows me, plz

[@rolandreymonroy311]

Can you send your Item Here in the Philippines when im going to order it?

[@เริงชัยเฟื่องฟู-ฌ8ฌ]

สุดยอดครับชอบมากครับfx

[@mahmoudhasanat7962]

There was a leak in my impact, then found it from part A24 19694 (brass screw), I tried to take it out to replace it and, I destroyed it and it still in its place!!, I can't remove it, what should I do?

[@kotaani2934]

At 7:11 i was thinking " What if Fx made an Fx impact pistol with an x barrel with a 10 shot mag at 30 ft lbs?

[@shaneperdisatt3256]

30 ft lbs on an air driven pellet through a 5" barrell???... Fredrik is good but not that good!

[@fathertimencUSA]

FX should make orings kits to change every oring in the gun.

[@Hipporider]

I bought a full O ring kit for mine.

[@fathertimencUSA]

@@Hipporider Yes I have seen some on EBay.

[@AirgunMunguia]

Me podrás pasar tu correo para una consulta sobre el regulador de wildcat MKII

[@nguyenhongkhanh7304]

How much is the brother? Can you transport to vietnam? I like it.😍😍

[@KhalilKhan-qg1et]

How much is this

[@jackagain8346]

I would stop at 5:30.

[@aliali-et7xh]

Price dis fximpact?

[@faisalalhelali3752]

اتمنى لو تكون الترجمه بعدة لغات ليستفيد الجميع بدون استثناء

[@Khoinghiep365ngay]

I want to buy goods to Vietnam, what to do

[@ZoVakVel]

Is it legal to carry these airguns on aeroplane? Do you have distributors in India? How can we buy FX air rifles in India?

[@hchruaipuia8305]

the very no.

[@haonguyenthe9333]

How many.???

[@atmosumartowismurti5495]

Clear Front view from the beginning will be more great tutorial..

[@FXAirguns]

Thanks for the feedback, will work at better angles to see everything.

[@alexzamora6700]

Holy crap. Hope I never have to do this to my impact !!

[@gitongsigit591]

👏👏👏

[@lexmar5443]

I want classic ph made airguns

[@piiputanwputranw8561]

Its is dancook

[@celebessumatra6889]

Ask uncle sniper please😢

[@cairotavares4373]

Sonho de consumo

[@detodounpoco9744]

Yo qiero una pero soy de republica dominica

[@oclathichche8217]

Helo vietnam

[@airepcp4881]

What are you trying to do?? Show your face or teach how to disassembly the gun??? I do not want to see your face!! Top view is nice but do not show details. If try to show an o'ring far away, I just see you but nit the parts you try to show. 85% of the video lost in bad takes. Get close views to the disassembly process in detail and we can really learn what you try to teach!!

[@tituspullo9210]

More detail needed... camera work is not showing everything that is being done clearly enough

[@nacaosuvlog6149]

I am very passionate but I cannot afford to buy. I can help you

[@paulkarkorian6377]

No wonder what it keeps leaking air !

[@jackagain8346]

See it it's the Foster fitting: kzbin.info/www/bejne/f52tnGiDor-EnaM

[@SivaKumar-hs3nm]

Fx air gun how mash rupish

[@bonglina4892]

Hi$$$$

[@brokosok]

You took apart a new gun and things were loose on it already tells me to stay the hell away from this gun

[@sontung2790]

Helo daoloa vn ok

[@fh-ge1wd]

dont do that at home >>>>>.

[@SHOOTER3258]

and these few parts costs 2k. € !!! :)

[@jeffreyxu9286]

i don't want to see your face, show me more of how to disassembly it

[@sergeynikolaevich1750]

Это не Русская винтовка .