FXBB STREET BOB HANDLEBAR INSTALL | LUCKY DAVES T BAR

Today we are taking off the stock mini apes on the Street Bob and replacing them with the 12" Lucky Daves San Diego bar. This easy modification changes the look of the motorcycle completely.
Check out our Instagram and keep up with some of our daily activities!
@2WheeledFilms
Lucky Daves 12" San Diego Bar:
luckydaves.com...
Dash Mount / Relocation:
luckydaves.com...

[@MotobikeMike00]

Love it man! If I ever do bars I’m coming back to see how this was done again!

[@2WheeledFilms]

Let me tell you T Bars are the way to go. They are by far in my opinion the most comfortable. We all have been through the ape hanger phase and have all found that 1- they did not fit the look we were going for and 2- don't handle well in the corners when doing some spirited riding. T Bars have both comfort and give the confidence and control to handle the twisties!

[@ADNBIKER]

Bonjour merci pour cette vidéo j'aurais une question est-ce que vous avez laissé les câbles d'origine où avez vous du en changer pour des plus long ? Merci à vous Ride Safe 🤟

[@2WheeledFilms]

Nous avons pu utiliser les câbles d'origine, nous avons même mis des élévateurs de 2 pouces plus tard sans problème.

[@ADNBIKER]

@@2WheeledFilms ok ok merci beaucoup ça me sera très utile je me suis abonnée à votre chaîne Ride Safe 🤟

[@marcponcini6794]

So i can put a 14” bar on my 21 fxbbs without changing anything?

[@jacksonclowes6041]

as a temporary measure before you do the bushings take the metal spacer out and shave 2 or 3 mm off of it to tighten the bars up

[@Airflores322]

Great job! I appreciate the video, where are you fellas located, I’d enlist your help for sure, I’m in Oklahoma City. 2024 Street Bob 114 here. Love the risers, I have the Thrashin ones on my wish list, HD says $1100 for install.

[@Wrath0365]

do you think those stock wires would still reach with a 14" san diego bar? Looks like all youd need is 2" on the brake line for the 14" also, or is the brake line sort of tight on those 12"?

[@2WheeledFilms]

You should be fine, there should be plenty of wire and cable.

[@jimmywilson4605]

What kind of fairing is on this bike? I have one similar, but more complicated it seems like and would like to see if I'd like it better on my Streetbob. Thanks!

[@2WheeledFilms]

Memphis Shades

[@ryancarp98]

How did you get the little rubber band on the throttle to stay in place while putting it in the new bars?

[@MojaOrtiz]

I appreciate it,Thanks for the vid!

[@FOEKING-zv4su]

What exhaust is that looks good 👍

[@2WheeledFilms]

kzbin.info/www/bejne/lYLQZnWGmstpn6s

[@2WheeledFilms]

Bassani Road Rage 2:1

[@vinterland7680]

Damn lovely friends u have. Looking good

[@robertwalker739]

Great video. I have the exact same bike and was wondering where you got those cap covers from? Thanks

[@2WheeledFilms]

For the forks?

[@ricklandyachtz]

Não entendo idioma. Qual altura do guidão?

[@2WheeledFilms]

13 polegadas, também colocamos risers de 2 polegadas para um total de 14 polegadas

[@crvzer]

Great job on the video, guys. Appreciate the effort. Any thoughts on whether I'd be able to pull off a 13.5-14" riser/bar combo without buying extended brake and clutch lines, and wiring (except for the gauge)?

[@2WheeledFilms]

I think that 14" would be a stretch.. we have the 12" lucky daves and the brake line is just about where you want it to be. We could probably get away with a 1" riser with no issue.

[@crvzer]

@@2WheeledFilms What’s a few hundred more dollar bills??? Haha. Thanks. 👊🏼

[@ImxLife]

Can you throw me a link of which turn signal relocation set he went with on eBay? Can’t find one that fits

[@2WheeledFilms]

www.amazon.com/Motorcycle-Signal-Clamps-Softail-Bracket/dp/B00Y8SGEVE/ref=sr_1_5?crid=1TDZ6DFYNBSRI&keywords=49mm+motorcycle+fork+turn+signal&qid=1659525530&s=automotive&sprefix=49mm+motorcycle+fork+turn+signal%2Cautomotive%2C59&sr=1-5

[@mattyb467]

So its simply unplug, and then plug back in?

[@crfrepz]

I have a 2021 softtail standard wanting to replace my apes for the hammer down apes not t bars was wondering are the ts you putting on 10inch or 12s was hoping I could get 12s on without having to extend wiring and brake lines etc what would you recommend. Cheers from New Zealand

[@2WheeledFilms]

They are 12” .. if you plan to internally wire you may need to extend with apes since there are more bar to run the wire though.

[@crfrepz]

@@2WheeledFilms thank you I will be running the wiring internal. Might just stick with 10inch ones then appreciate it guys

[@berniekirk1397]

I think I saw Zack doing the test drive, but I always thought his name was Josh?

[@michaelmorgan3752]

Where did you get the bars and cable kit? Looking to put this exact kit on my 21 lowrider S

[@2WheeledFilms]

The bars are Lucky Dave’s.. check the link in the description for them.. We didn’t have to use a cable kit because the Street Bob already comes with 10” mini apes and the cables and wires are long enough for 12”.

[@lennymunoz0617]

im all late to the comments lol but i have a question if you can answer it to the best to your ability pleaseeeeeeeeeee!!!! im about 5'7 5'8 i want these san diego bars but idk if should do 12 or 14...... i also have a 2023 softail standard will these sizes even fit on my bike ????

[@2WheeledFilms]

Go 14”, we put 12” bars on and a few months later put 2” risers on. So they are a total of 14” now with no need to extend anything. If the standard comes stock with the mini apes like the street bob does you should be fine

[@lennymunoz0617]

@@2WheeledFilms yes it does come with the mini apes! Thank you so much …I really want these bars

[@lennymunoz0617]

With my height I should be ok with the 14 I jus don’t want my hands above my shoulders

[@longranger308]

Are you sure that wire you cut wasn’t for adding cruise control?

[@toreyhaun4113]

Hey, been looking for bars, but not sure if i need pullback risers or not. I have LaPera similar seat and im trying to get in more upright seating position. I'm 6'1" . How tall are you and do you feel more upright now? Thanks!

[@2WheeledFilms]

Zach is 6’2, he sits upright and is comfortable without a pullback, and the pull back will make him less upright if anything. His arms are a good distances from the bars, no stretch to the bar but also there isn’t a bend in his arms.

[@ttvsiriuswhite7346]

what bags are those?

[@2WheeledFilms]

I assume you're referring to the bars? They are Lucky Daves San Diego bars

[@MrPAULONEAL]

Do they function better than the original?

[@2WheeledFilms]

Function is the same.. they are handlebars. You sit up much more up right and in turn are much more comfortable. Makes the ride riding experience better, it helps build the confidence.

[@jimmak85]

did you have to extend wires or cables???

[@2WheeledFilms]

Didn’t have to extend any wires or cables.. if you go up to a 14” bar and re route some wires it would work but the clutch cable will be very tight. 12” is safe especially if you plan to internally wire them. We would recommend that if going to 14” you extend the wires and cables.

[@RoadRashHD]

good deal there

[@PillowheadCreations]

So u don’t gotta depin them?

[@windchaser5]

whats the stock handlebar size?

[@2WheeledFilms]

I think the stock mini apes are 10 inches

[@codyrife5828]

What grips are you running?

[@2WheeledFilms]

ODI Hartluck Lock on

[@hobbitpsi]

So that's the street bob after it became a Softail. Yeh....I'll keep my Dyna version....looks so much better.

[@2WheeledFilms]

Sounds like a typical Dyna bro response.

[@deonnawilliams4903]

Beautiful

[@charleyrider9775]

My local Harley dealer wants $1000 labor to replace the handlebars, wiring and cables.

[@2WheeledFilms]

Bring it on by, we will do it for less HAHA

[@drainmonkeys385]

I wouldn’t do that if you paid me.. it doesn’t look good

[@2WheeledFilms]

That’s what every female has said about you buddy.

[@Redmirage47]

The other bars are better

[@porkchopspapi5757]

So all that work to replace high bars with high bars....

[@micahvelli_236]

The stock bars are shorter and wider, these t bars are taller and more narrow which is a more comfortable riding position..

[@isaactaylor1833]

You’re an idiot. Apes versus t bars are not the same…..

[@evolveo8015]

Amater😅