That reservoir mount is motorcycle jewelry! Just bought a 2024 XSR900; I forgot how crap stock suspensions are! ;-)
@TwoWheelObsession2 ай бұрын
Yes they are!
@videowithdamir2 жыл бұрын
I have no idea how you got that bolt on the bottom back. I dropped my bike trying to lift it etc but I got work done and its awesome but I wish I have taken it to the shop and pay $60 instead of scratching my bike and my lowerback... very tricky thing to do. I had to buy tools to get to those bolts too. You should not make it look easy lol tell people the truth! without right tools and experience it will be a nightmare. especcialy if you are by yourself and no friend to help lol learned a lesson
@landonhenderson88366 жыл бұрын
First time ive seen algebra used in real life lol
@TKnuckles3336 жыл бұрын
"That's ghetto.". Ha ha. I love it! Thanks for a great vid. Good job!
@stephenromano19066 жыл бұрын
Hi Bryan-Absolutely love and greatly value these tutorial videos. (As well as your reviews). You are a big reason a non mechanical guy like me now has the confidence to perform basic maintenance on my 2016 Super Tenere ES. Has saved me $, time and provided peace of mind knowing the service was done right. I found many of the core steps are similar to my Tenere so I feel your FJR & FZ service video’s are transferable to other bikes as well. Appreciate you sharing!
@alexpryce5556 жыл бұрын
Super helpful video. I have a 2014 MT09 and have just ordered a Nitron sport shock set up for my weight. Am relatively new to doing my own maintenance and I really want to start doing jobs like this myself, will be using more of your videos!
@infantrymatt835 жыл бұрын
Pryce 191 I have the R2 shock about to install and the R22 fork kit. I love my nitron!
@canada_rye2 жыл бұрын
Good video, I found it easy to swap my shock today just by jacking the bike up by the right foot peg, it made a tripod with the side stand and front tire that was very stable. Then I used a ratchet strap through the rear rim and over the rear subframe to manipulate the mounting holes to line up. Piece of cake!
@scoummarc18456 жыл бұрын
nice job, thank you. your bike is so clean , bravo!
@joebidden49143 жыл бұрын
Thank you for doing this video. I was on a budget so I went with the K-Tech Razor and I'm going to install it hopefully tomorrow. The pogo sticking on the rear factory shock has been driving me crazy. It's caused me to kick out the back end and do a small drift a few times, caused the back end to hop in some corners and just all around feels spongy and kinda reminds me of the old mashed potates and gravy suspension on like an old crown vic or something, just seems completely outdated and wouldn't have cost Yamaha too much to put a proper rear shock on the bike from the get go. On my 2018 I adjusted both fronts and set the dampening and I've gotten that one to be very planted and comfortable, no more brake dive and it's helped stabilize the rear more but definitely hasn't hidden the problem. I am looking forward to getting on it and being able to have more fun and overall will be safer to ride by getting rid of that pogo sticking. I'm 190lbs without gear and I have the front set down on the 2nd to last ring on the tops (so one ring showing) and have setup the rebound as well. I used to have it set to 2 rings showing and have adjusted the rear suspension one click tighter and that did make a difference but it still is doing all the stuff mentioned above, just more controllable.
@dougiequick1 Жыл бұрын
I visited both stohltech and penske websites and see zero products for 21+ MT09 in fact no mt09 products period shown at Penske....sigh sadly cause I really like what I see! Sooo I guess Ohlins?
@scotttracey49195 жыл бұрын
I’ve just changed mine to a Nitron R1 using your vid. Another job you’ve helped me complete. I’ll be setting the suspension up using your video too. Thank sfor all the help.
@jackpistone80154 жыл бұрын
is this possible to do without a rear stand?
@scotttracey49194 жыл бұрын
Jack Pistone you need to get the rear wheel off the ground. I used an Abba stand
@LOOKWHATISEEHERE6 жыл бұрын
"Something new there - don't know if you picked up on it"? QUICKSHIFTER!!!! Yeeeeeessssss!!!!!
@dougiequick1 Жыл бұрын
Never realized how much algerbra might be needed for such a simple swap! Who knew?
@mikehenry71563 жыл бұрын
Just did this on my 2019 MT09 using an Ohlins 535. I will add that the top bolt doesn't just "knock out", my bike has two beefy hydraulic lines crossing the top of the bolt, they needed to be "massaged" aside. Ohlins also instructs to remove the lower dogbone bolt, I discovered that unless one DOES the lower shock bolt (delightfully recessed into the shock clevis making common wrenches nearly useless) won't get above the swing arm frame. Once there though sockets rule the day.
@budzianow3 жыл бұрын
thank
@m1chi13l2 жыл бұрын
I am removing a Matris damper, and I couldn't get enough compression without moving the lower dog bolt. Fk me, that thing was on so tight, I would not have gotten it off without my 1/2 impact. And it totally mangled the nut
@wtrv13 Жыл бұрын
Hey! I know this is a long shot, but I'm going to swap out my shock soon. What bolt is the "lower dogbone" bolt? I'm not sure and don't want to loosen up the wrong bits. Cheers!
@trevorhesteer9866 Жыл бұрын
im a tall rider looking for anyways to make my bike taller suspension wise. please help
@dancingmaryjane5 жыл бұрын
You mentioned it making easier to wheelie? If I have it in traction control 2 it still wont wheelie right? This is my second bike I usually ride in B mode and TC2 . after getting it flashed its still plenty fast but the front wheel wont come up. I still want to upgrade my suspension though
@TwoWheelObsession5 жыл бұрын
Correct mode 2 it never leaves the ground
@dentman676 жыл бұрын
Should be all set for those straight runs to Wawa.
@TwoWheelObsession6 жыл бұрын
+Jack Petracci mmmm wawa
@jackpistone80154 жыл бұрын
cant wait for my k tech razor r to come in :)
@StreetFighter_Brah6 жыл бұрын
Thanks for the Great videos man, helps out a ton! New sub
@Brian_R62 жыл бұрын
Just to be clear, adding preload is clockwise and removing preload is counterclockwise? I gotta adjust mine because I get a unstable wobble at around 150kmh.
@tingtongitshakim4 жыл бұрын
Is it worth it to use the double clicker for a normal daily ride, and sometimes maybe going for a ride and maybe enjoy a few corners? Or just the single adjustable is enough? Can someone recommend?
@gregmatty63932 жыл бұрын
Thank you for this awesome video. Are you 99.9999% certain the catalytic converter/stock exauast will work as a jacking up point? I don't want to damage my exhaust. Alternatively I could place a 2/4 under the oil pan instead of a text book and this should allow the jack to lift via the oil pan and not the exhaust. Or I could place a few shims under one or the other and spread the weight between the exhaust and oil pan. Maybe I just answered my own question. Thanks again.
@awutub4 жыл бұрын
I replaced on my MT-09 Tracer RN29 2015 first version (rusty) stock against newer modified stock shock. There is axial/lateral play on lower mount between shock bracket and 1RC-2217A-00 ARM, RELAY. How much lateral/axial play do you have on upper and lower mounts? Please show us this in video. Is this later/axial play necessary?
@richfjr13002 жыл бұрын
have you looked into doing anything on the rear shock with the FJR? i know its the ES model, just trying to find out the options as i'm upwards of 33k miles and understand that's when these shocks start to wear.
@MrMegavolcom4 жыл бұрын
I am attempting to install a Ohlins YA 535 on a 2018 Yamaha MT-09 and I followed your instructions but am not able to remove the rear (bottom) bolt as i do not have clearance. I have the front tire on a wheel choke. Should i have the front lifted with a triple tree and this will provide the clearance in need? Thank you for your help.
@wg73133 жыл бұрын
Same. Idk what to do other than remove the exhaust and the link arms at this point.
@Nemesis0937815 жыл бұрын
Thank you for the video, Thumbs up.
@jackpistone80154 жыл бұрын
So I only weigh about 160 in gear, but I ride the bike very hard. I also do not feel like dropping a grand on a shock, what do you think about the k-tech lite shock?
@hotstove6539 Жыл бұрын
The instruction on this video was great. I noticed our narrator was going “Barney Rubble” on us. I hope when he took a test ride he put on some shoes!
@max1m3c45 жыл бұрын
Very helpfull ! Thank's from France !
@awutub4 жыл бұрын
10:42 newer modified stock shock have an opening i.imgur.com/60uj8Qd.jpg Are these serviceable now? No more throwaway piece? For what is this opening good/intended?
@bleh83103 жыл бұрын
Not sure if it was mentioned but the 14-16 FZ09s have the oil drain bolt on the bottom of the pan so it's not flat like yours is. Either use towels to cushion the pan, or spread the rear using one of the other methods if you have an aftermarket exhaust.
@daytonleegood12624 жыл бұрын
this dude sounds like seth rogan😂
@michaelblakeney14 жыл бұрын
Great video! If I could add another couple of tips - if you have an abba type stand that holds the bike up near the swingarm pivot, you can manipulate the rear linkage easier if you take out the lower dogbone linkage bolt (don't forget to replace on installing!) and you can regulate the wheel height by using a ratchet strap thru wheel and over seat. Means you can precisely regulate bolts lining up.
@mattingray56514 жыл бұрын
I am more concerned the bike's balance when the shock is removed. Would it be more stable if I use the center lift instead (in addition with the rear stand)? The center lift is just to prevent the bike from dropping.
@fabio27734 жыл бұрын
Hi!! Thanks for your video, they are really great, very passionate about your work! I have a question about an absorber with external tank for compressione that I'm gonna install on the bike in the near future. Is it possibile to install the shock absorber in order to put the external tank on the right side of the bike?
@peterkiro2132 Жыл бұрын
Not to disrespect anyone but why not get the SP model😊
@TwoWheelObsession Жыл бұрын
It didn't exist back then.
@infantrymatt835 жыл бұрын
Hey for a center lift for this install. What about a center stand like the SW-Motech for the XSR900?
@ArcanePath3604 жыл бұрын
$1000 and they give you a jubilee clip to mount it, lol. A black zip tie would have been a step up.
@TwoWheelObsession4 жыл бұрын
They now do, after my video went up
@zaposacrefrigeration453915 күн бұрын
What upgrade did you put in the front?
@TwoWheelObsession15 күн бұрын
Stoltec forks
@frankstocker54756 жыл бұрын
Love the Steel Cap Boots you are wearing.
@TwoWheelObsession6 жыл бұрын
Nope.
@heykat185 жыл бұрын
Are you still happy with the fork and rear shock upgrades from Stoltec a year later?
@TwoWheelObsession5 жыл бұрын
LOVE IT
@anthonycaldi70564 жыл бұрын
Great Video! If you were buying this bike now, knowing what you know, would you buys the MT 09 SP or would you buy the standard MT 09 and make the suspension mods yourself?
@TwoWheelObsession4 жыл бұрын
There is no sp here
@cruisingthethaiway68814 жыл бұрын
The SP suspension is also very low quality junk. It can not be serviced. No compression adjuster. Horrible
@sailingyemaya97814 жыл бұрын
Stoltec has some nice parts on there website. Did you go with the double or triple clicker?
@ruizinkpt4 жыл бұрын
Double
@dondempsey71136 жыл бұрын
Bought a replacement shock (Nitron) and now find that the ABS brake lines and 4 other lines block access to the top shock-bolt. The brake lines are really tight the others are held together with cable ties and can barely move. I can't use anything bigger than a small screwdriver blade through the frame window to just touch the bolt head and then only from an angle. Questions: Did you have this problem with access? Did the bolt just sit in the left side of the clevis while you removed and then replaced the shock? (If the bolt falls there is no access from above (ABS unit and lines) and from below it would require a tiny hand to get access.) Thanks in advance. Don
@TwoWheelObsession6 жыл бұрын
You don’t need to remove the bolt just slide it enough out of the way. The lines move enough.
@dondempsey71136 жыл бұрын
You're right. The lines can move enough it you apply force and everything lines up. There is no way of getting any sort of tool between the lines and the bolt, but those same lines prevent the bolt from falling out of the LHS of the clevis. Unfortunately when I used a screw driver blade to push the bolt back though the shock the bolt head didn't align with the detent on the clevis. I had to cut three cable ties and take out the bolt holding the lower ABS-lines junction block to loosen the lines enough to get a finger between the lines and the bolt head to align it. But without your KZbin post and (speedy) response I would have probably paid the shop $150+ to install the new shock. So thanks again for the video(s) Don
@scottastell9415 Жыл бұрын
Nice one.
@reeceg60585 жыл бұрын
I tried using the same method/ process to swap out my 17 model shock for a zx10 unit. What a disaster. Resulted in taking off the tank. 4 hrs later
@Impervium10904 жыл бұрын
That’s because it’s not a direct fit for the fz-09.. it’s for a zx10
@taterlysaladman93774 жыл бұрын
Yes the Kawasaki shocks going on FZ MT09 are another internet legend. Most have to be modified, and only a couple of years of zzx9 or something like that are a close fit, others require some chopping away of the bike and some the hole in the shock needs enlarged. Not a problem for wreck it ralph that follows the internet! The Kawa shocks need to be correctly resprung and they also need to be rebuilt to be very good, which brings the price up to within $200 of getting a perfect fit Ohlins or other brands, which are down to about $550 american dollars now.
@chitownbikerboymotovlog4676 жыл бұрын
Thank you for the video. I own a 2017 FZ-09 as well. Forgive me, but I can't help but think that after all the upgrades I've done on my bike that I could have bought a better bike - say a Triumph Street Triple. Just saying. ...
@TwoWheelObsession6 жыл бұрын
That is true, and that's the point of the FZ series. They are bare bones bikes meant to be personalized and upgraded and are CHEAP. Still there are core differences between the platforms. For example I hate the riding position and pegs of the Street series but otherwise love the bike. But you certainly do pay for it. In the end I now have a bike perfectly suited to me, built exactly the way I wanted and it's still a good bit cheaper than a fully loaded ST equivalent. Not counting my labor of course ;)
@chitownbikerboymotovlog4676 жыл бұрын
TwoWheelObsession I get it. How does your new suspension compare to the Öhlins on the ST?
@TwoWheelObsession6 жыл бұрын
Equivalent. Pensky/Ohlins is all about the best deal you can get, both are top notch. The custom valving and springs in my forms make them perfect.
@jasonsmith91616 жыл бұрын
I’m about to upgrade suspension on my 2018 MT 09. Probably going to go with this same rear but the front upgrade you did is just more than I feel capable of. I’m considering just upgrading the from springs for my weight according to race techs calculations (along with the fork oil) do you think I will be satisfied with that.? I don’t want to drop another $1000 on the from suspension.
@TwoWheelObsession6 жыл бұрын
Nope. Good part of it but the damping is critical.
@jasonsmith91616 жыл бұрын
TwoWheelObsession 😪thanks for the reply. I’ll be looking into some cheaper option then for now at least. I’m right at 230 lbs so the bike is under sprung front and rear for me from the factory.
@ct96835 жыл бұрын
@@jasonsmith9161 if you still haven't upgraded and you are on a budget still then look at the YSS cartridge kit. Around £240
@tudtran82634 жыл бұрын
Do you have a link to the bracket?
@76DANIE6 жыл бұрын
Hi I need that support made at 8 that you see in the video at 17:53. I live in Italy, can you tell me where you bought it? Thank you
@TwoWheelObsession6 жыл бұрын
I said I got it on ebay. Search for 'FZ09 penske' and you'll see it.
@TL-oe7rd6 жыл бұрын
Daniele Pi did you find ?
@jasonsmith91616 жыл бұрын
Daniele Pi stoltec now sells the canister mount on their site.
@RaytheonNublinski6 жыл бұрын
Just looked it up and that bracket is now included.
@TwoWheelObsession6 жыл бұрын
Yep he hooked up with the guy last month
@pas00034 жыл бұрын
Excellent video!
@TheAlperArabaci4 жыл бұрын
All these changes seems placebo affect to me but I respect your feelings because you are an experienced rider and a wise man. It's a great tutorial video as always for anyone who loves DIY maintanence on it's bike like me. Thanks. Greetings from Turkey.
@TwoWheelObsession4 жыл бұрын
LOL not even close. It's a dramatic difference. Once you experience it, you'll know.
@ragsnorth16242 жыл бұрын
Placebo lol. The stock shock is dire. There’s no way this change is placebo.
@drec.1346 жыл бұрын
Why didn’t yo wait and get the Tracer or the Super Tenere?
@TwoWheelObsession6 жыл бұрын
+Dre C. Huh? Apples and oranges
@napamura41176 жыл бұрын
Can you lower the ride hieght on that shock???
@TwoWheelObsession6 жыл бұрын
Yes
@abramstewart62056 жыл бұрын
Geez that thing is expensive! But I guess they run in that range
@StoltecMoto6 жыл бұрын
No doubt, it's not pocket change. But, seeing it in person will ease your mind. Riding on one, will make you a believer. Fully CNC'd aluminum, designed and produced in the US, and 100's of thousands of miles on the road and track to back the design up. This particular shock for the FZ-09 was a joint development between Penske and Stoltec Moto going on 4 years ago. Its continuously evolved over that time based on customer feedback, so back to the video: not an off the shelf item, and definitely not 'one size fits all'.
@StoltecMoto6 жыл бұрын
We already have them! www.stoltecmoto.com/shop/yamaha/17fz09/17-fz-09-spiegler-ss-brake-lines/
@drec.1346 жыл бұрын
Great videos!
@blunt7856 жыл бұрын
Best
@kellyj53896 жыл бұрын
Cool
@Dustin69806 жыл бұрын
2 questions ..where did you get those mirrors? and where did you get that seat and how comfy is it?