G-body Transmission Oil and Filter Replacement 83 Regal

[@nogarage4473]

Thanks for this, I needed some info from this video as I have over filled my Transmission on the 81' Malibu. While I am down there may as well replace the filter too.

[@richardfoster9499]

Nice regal, I had a sky blue 83 regal mine didn't have that marker light/blinker on the lower front fender. My original 231 V6 blew up, I dropped in a 77 350 Olds V8 with TH350 transmission, the original rear end was geared for a V6, I swapped them out for taller gears. I installed seats from a Oldsmobile cutlass.

[@StillStandingGarage]

Nice! That's a nice upgrade. The motor on my Regal blew a long time ago and I wanted to swap it out for a 350 but decided to keep the 231.

[@LOWRIDERSGTV]

Hell yeah homie getting her ready and running right that's what's up

[@StillStandingGarage]

That's right! 💪 gotta make it reliable 💯 Thank you for watching 🤜🤛💯

[@bossborot5354]

Ay homie must be nice having working power windows😂, jealous that your Buick stays on after the first crank🤙working on my 83 T Type that my dad left behind.

[@StillStandingGarage]

😂 I had to rebuild my carb and set my timing right to have it running right 💯...Nice! That's what's up!

[@Javierdos501]

Dope content compita also tip on what u can do for the gasket is u can spray on 3m glue the oil pan an slap ur gasket an it wont move👍

[@StillStandingGarage]

Gracias 🙏 Great tip! I'll try that next time 💯

[@ivanmorales367]

I’m having a hard time finding a gasket seal for the caballero since it’s a Mexican car the parts are hard to find

[@StillStandingGarage]

These were made in the United States as well. Have you tried Rockauto .com?

[@artr249]

Any chance you could make a video on how to place a vehicle on jack stands and where to place them?

[@StillStandingGarage]

No problem 🔥💯

[@paulperez7439]

Can you do a video of how you can do maintenance on the pumps where the hydraulic oil goes because I have the same Buick as yours but soft top and no one in my area works on hydraulic cars 😞

[@StillStandingGarage]

Yeah no problem. Once I get to it I'll make a video. Thank you for watching 💪💯

[@jrcheck3038]

One more question can I use the same manual book like the one you use for the 1980 cutlass or is it different

[@StillStandingGarage]

Haynes makes one for 1974 to 1988 Cutlass. So it will be different from the one I used.

[@jrcheck3038]

@@StillStandingGarage thank you I appreciate your help

[@StillStandingGarage]

No problem at all 👊💯

[@s_cutt]

What kind of transmission pan does a 82 83 use do you have any links??

[@StillStandingGarage]

You'll have to determine what transmission you have. I don't have any links

[@chrisdicus3183]

It's a very nice car I have a 82 Cutlass supreme on building right now I don't know if I'm going to do hydraulics I kind of had a few cars with hydraulics already so I don't know my plan but I was going to ask you where did you get the speaker kick panel pods from did you make them or did you buy them somewhere

[@StillStandingGarage]

Nice! I had the kick panels made in '05 by a shop

[@chrisdicus3183]

@@StillStandingGarage I sold my 77 Cadillac coupe deville with hydraulics and everything last year and I got this 82 g body but I'm not sure I want to go with hydraulics but the same time I feel that's the most desirable lowrider for me at this point

[@527stoners]

Would this be around the same way to do it on a 87 cutlass? ..Dope video clean footage

[@StillStandingGarage]

Yes, it would be the same for a '87 Cutlass. Thank you for watching 💪💯

[@danroll7494]

Hey, brother. I'm wondering if your pan ever leaked since you finished your filter change. I'm doing my son's 85 Regal soon, and I won't use RTV if yours doesn't leak. Thanks man.

[@StillStandingGarage]

It didn't leak at all. You just have to make sure not to over tighten the bolts. You should be good as long as your pan isn't bent. Thank you for watching 🤝💯

[@jgjays6525]

My boy what’kind of charger do u use? For your batteries?

[@StillStandingGarage]

This one is a Schumacher 72 volt battery charger.

[@jrcheck3038]

Was up gee were do you buy the mechanic book can you help me out

[@StillStandingGarage]

You can get it on Amazon

[@jrcheck3038]

@@StillStandingGarage thanks gee nice g ride I’m working on a 1980 cutlass

[@StillStandingGarage]

Nice! 🔥💯

[@SWB_mike]

How you got auto windows bro

[@StillStandingGarage]

I have a window module added to my alarm. It allows me to auto roll up/down the windows. Also, when I activate the alarm it will auto roll up the windows if they're down. I can also roll them down with the alarm control.