G code for beginners part 3 G83 Peck Drilling and M98 M99 subprogram

[@hectorgarciajr1693]

Thank you for these videos, I got and internship at a manufacturing plant and these videos have helped me a lot!

[@brandonboyd001]

Thank you for these. I’ve watched all three so far. They are really informative and well explained. I hope you have the opportunity to continue to make them.

[@weitlingD3P]

Thanks Brandon. I will. Next coming up is tool compensation.

[@brynleywilliams2194]

glad to know your well again

[@nasrahmed6236]

Thank you so much weitling We appreciate you effort

[@BonaRasmey]

❤thanks, I'm working on my new job and has helped me out a lot

[@weitlingD3P]

You are welcome. Glad I could help

[@ALG397]

Understandable lessons for beginners thank you Are there other lessons?

[@OmranMalek]

Hi, thanks for this tutorial and the other one, i have a question, in the first 15mins of the video, u were cutting the first hole, isn't there an M code to make the drill rotate? like you are cutting in the material but i didn't see a code to make the spindle start rotating

[@NayeemAhmed-b1s]

Where is part 2?

[@vanarajsinhmatieda427]

please please make more videos sir, same speed , same explanation style... thanks for 3 videos.....

[@weitlingD3P]

Thank you Yes I will I have one in production. :)

[@IceCreams62]

A good practice should be also to run/stop the spindle to drill the holes 😉

[@thalavalikaran262]

Can u make a video on Canned cycle?

[@weitlingD3P]

Sorry i never tried that.

[@thalavalikaran262]

@@weitlingD3P it's a inbuilt method available in Siemens cncs for making groove, tapers etc...

[@nasrahmed6236]

But id like to ask you a question Is it true to program this workpiece like G91 z12 G94 s12000 f500 G00 x0 y0 G01 X30Y40 i6 G00 X0 Y0 G01 X80 Y20 i6 M30

[@weitlingD3P]

You are on the way. Please see the code below with my comments I think this is what you want to program. You can copy this code into NCviewer and see the result. G21 G90 G94; Start code mm mode Absolute positioning G90 G00 Z12; Safety Z ;G94 s12000 f500 Skip this line G00 x0 y0; Center of origion G00 X30 Y40; Rapid move to first position G00 Z1; Rapid move 1mm above item M03 S12000; Start the spindel clockvice 12000 G01 Z-12 F250; dril down 12mm 250mm/min G01 Z1 F500; Pull dril out of the item Goo Z12; Raise dril to safety high G00 X80 Y20; rapid modeto second hole G00 Z1; Rapid move 1mm above item M03 S12000; Start the spindel 12000 G01 Z-12 F250; dril down 12mm 250mm/min G01 Z1 F500; Pull dril out of the item Goo Z12; Raise dril to safety high M30

[@nasrahmed6236]

@@weitlingD3P yes sir thank you thats what i ask about .....you are humble engineer thank you

[@weitlingD3P]

@@nasrahmed6236 You are welcome