Explanation on new avionics installation in a Skylane. Garmin G3X Touch, G5, GTN650Xi with Smart Glide, GFC500 Autopilot, GNC255A Nav/Com, 350C audio panel.
Пікірлер: 40
@vasingovender Жыл бұрын
Watched tons of G3X videos as the user manual is not useful. This video by far the most comprehensive G3X overview I’ve seen with crisp descriptions and outstanding illustrations and screen shots. Well done !!!
@mikecrawford3805 Жыл бұрын
Very well done. This is the best introduction presentation for the Garmin G3X Touch, that I have found so far. In the last 2 weeks, I think I have viewed every presentation on the G3X Touch, available on You Tube, and this one, is the most clear, and easy to follow. Thank you.
@youskunktown Жыл бұрын
Thanks Mike. We've had this setup in the 182 for six months now and we're so happy with it, we've decided to do it in our 172 also (minus the fancy expensive autopilot).
@deonventer56154 ай бұрын
A superb presentation. Thank you.
@socialbutterfly499 Жыл бұрын
I’m in the piper p100i a lot and this video has helped a lot and showed me some secrets I never knew
@3dogman3112 жыл бұрын
An excellent presentation. Very nicely done. Thank you.
@warwickchristian56822 жыл бұрын
The best presentation I have seen..! Cheers
@ashokaliserilthamarakshan50792 жыл бұрын
Thanks for the overview. Very helpful 👍
@richfreddo6064Ай бұрын
Outstanding video. Thank you!
@stephengill4282 Жыл бұрын
Thanks excellent help and presentation
@tedc66942 ай бұрын
Amazing
@TXMURF11 ай бұрын
Stick with industry standards please.... it's not a score board.... Lets call it what it is, a MODE annunciator. EVERY TIME YOU SELECT something on the mode control panel (AFCS) ALWAYS check the MODE ANNUNCIATOR TO VERIFY YOU GOT WHAT YOU SELECTED. Other than that I love your presentation, very well done!
@aviator267 Жыл бұрын
Brilliant content
@markspears77902 жыл бұрын
Very awesome presentation, I am starting my IFR training next week in a Piper Archer with the new G3X Garmin ! Did you have an information sheet for quick setup for IFR or any other helpful notes to study ! Thanks
@AV8BS2 жыл бұрын
You’re lucky … to be starting instrument training with a G3X. Sorry, I don’t have that cheat sheet. I think one of the most important things for you will be “navigating the navigation”… understanding the display of, and switching between, nav sources. CDI & OBS, and use of the supplemental nav data available through proper setup of your bearing pointers. Good luck!
@ramin14222 жыл бұрын
Thanks, very good presentation👍
@tnflygirl8 ай бұрын
Good video. My plane is getting this along with the 650 and autopilot and I cannot wait. I do have a question on the direct to button. What's the point having it on the G3X screen if it doesn't work when you press the button? Also I will have the 355 separately, I'm assuming its easy to switch back to either one on the G3X. Thanks again
@AV8BS8 ай бұрын
Essentially this: You can only navigate with one GPS at a time. The G3X has its own internal GPS system that is VFR only. Consider it your backup GPS - only to be used in the event the 650 fails. Your G3X has an easily configured GPS setting to "Internal" or "External". This tells your G3X screen which unit it should display data from. You should have it set to "External" because the internal one is unable to select an approach, arrival, SID etc. (Remember, the G3X came from the experimental market and it can be used alone to navigate VFR.) The 650 has a direct to button. You should just get in the habit of doing EVERYTHING route-wise on the 650. Make it a habit; it's easy. Not sure what you mean about switching the 355 back on the G3X. Can you explain that question again?
@tnflygirl8 ай бұрын
@@AV8BS Thank you! Makes sense. In regardless to the 355 is I will have both the 650 and the 355. Can I switch them on the G3X? Right now I can switch GPS 1 and GPS 2 on my aspen. Hope this makes since
@AV8BS8 ай бұрын
@@tnflygirl Oops - my bad, I was thinking about the audio panel (350) not the navigator 355. So - that's an awesome setup! The 355 will be backup to your 650 and the internal GPS in the G3X will be backup to your backup. Assume you have a G5 standby PFD? In order to answer your question, that's an important piece of information (because of its ability to display nav data).
@tnflygirl8 ай бұрын
@@AV8BS Yes I will have the 275 as my backup PDF. Yes the 355 will be my back up to my 650 xi. I'm replacing my 430 waas with the 650xi and keeping my 355 nav :)
@AV8BS8 ай бұрын
@@tnflygirl OK - that's a sweet setup and yeah, good to ditch the 430W at this point. I hope you have a good relationship with the shop where the installation is taking place. Couple critical things that you'll want to have addressed during installation: Make sure that you can display the navigation on both your primary PFD - G3X and your standby PFD - 275. These are settings and wiring issues that must be done properly. So, tell them you want to be able, for example, to display a VOR signal (crossing radial) from your 355 on your 275, while you are using the navigation from the 650, which is being displayed on the G3X CDI. Needless to say these should also be selectable on the G3X bearing pointers. The other thing is you would want the two GPS units to cross-talk - syncing the route. Good luck! What kind of plane?
@RynoKarelsen11 ай бұрын
How do I add the fuel level indicator on the left above the CHT?
@AV8BS11 ай бұрын
Hi @RynoKarelsen. Are you referring to the vertical EIS strip on the left side of the PFD? If so, then that layout is accessed through the configuration process. It should only be attempted by someone with a relatively deep understanding.
@RynoKarelsen11 ай бұрын
@@AV8BS Yes, I am refferring to that one as indicated in your video.
@AV8BS11 ай бұрын
@@RynoKarelsen So, that's the answer - configuration mode. The G3X is highly configurable. See this link www.blueskyaa.com/members/g3x-configuration-changes for something that I just published yesterday for our club. It talks about some recent minor configuration changes we've made. We now have two G3Xs and will be installing a third in March.
@dannymiller15942 жыл бұрын
Does the nav side of your 255 get much use?
@AV8BS2 жыл бұрын
Hi Danny, if you're referring to the internal OBS and CDI capability, no. At least, not yet. The only advantage that I can see to that is for someone who really wants that CDI representation. If you're adept at reading the pointer needle on the G3X HSI, then there's really no advantage to the CDI, IMO.
@dannymiller15942 жыл бұрын
@@AV8BS I have a G3X & 650Xi in my plane too. I may be wrong but it seems to me that maybe the only time one might need the extra Nav & CDI is for identifying a fix that requires two navs to do so. I've seen some areas that have this and I have yet to figure out a way to use both, GPS & VOR Nav, on the 650.
@AV8BS2 жыл бұрын
@@dannymiller1594 Hi Danny, if you touch the HSI, it brings you to the PFD Options menu. From there, you can set your bearing pointers. Set one to VLOC2 and now you have a pointer towards that other NAV source. It's not the same as a CDI, but if you know how to read it (hint: look at the tail), it will give you the exact same information i.e. when the tail is pointing at the proper radial on the HSI, it's the same as having your #2 CDI centered. Does that make sense? Take a look at an approach that requires two nav sources, think it through and get back to me if it doesn't make sense.
@dannymiller15942 жыл бұрын
@@AV8BS Thanks so much for that. I love the G3X and learn some new capability almost every week.
@devaconcc9038 Жыл бұрын
How do you switch between gps and vor?
@AV8BS Жыл бұрын
That’s done with the CDI button on the GTN650, “Default Nav” page… similar to the 430 or 530.
@devaconcc9038 Жыл бұрын
@@AV8BS no cdi button on the g3x
@AV8BS Жыл бұрын
Yes, it can be done from the G3X also…PFD options page, I believe. Since we have a WAAS navigator, we recommend doing all navigation functions through it. There really is no problem doing it through the G3X. My concern about getting in the habit of making nav changes through the G3X is that it has its own GPS, which is VFR only. So, in my opinion the only time you should make changes there is if your IFR navigator fails.
@cobbnissen83312 жыл бұрын
Out of this worl🌍!!! Do not waste another day = P-R-O-M-O-S-M!
@DanFrederiksen6 ай бұрын
such a racket to have the redundant trivial GTN unit instead of just being part of the main display. Just so they can steal 13 grand more from you and greatly increase the installation cost.
@DanFrederiksen6 ай бұрын
switching between tapes and round dials is like a Tesla switching between ford model T and model A. incredibly stagnant 'thinking'
@TheBioniXman7 ай бұрын
What a boring video. The subject is very interesting, but when narrated in that droning voice is not.