I don't care what anyone said, I'm totally putting XN Raiser unit of the 00 Gundam Seven Sword/G. It has a total of 14 swords!
@ZarlLarlack6 ай бұрын
I did that with my MG XN Raiser
@zulmark36 ай бұрын
"How many sword do you want?" "yes"
@winggundamzero10406 ай бұрын
@@ZarlLarlack throw the qan[T] full saber's swords on it too XD
@ansanojezreel69336 ай бұрын
swords are strong, someone who has a lot of something strong is strong too - discount patrick coulasour
@GojiraFan-in9oo6 ай бұрын
XN Raiser with Quanta and 00 7 Sword and another GN Sword 3
@ishlight37726 ай бұрын
00 Raiser has been one of my favourites since day 1. This really brings it back with more detail.
@PaszerDye6 ай бұрын
I started with the seven sword version though, and it's a grenade on the lower half. The toes fall off if wiggled too much, the knee armor that holds the katars are barely hold on, and the leg joints attaching it to the hips only have minimal grip. IDK how it ended up like that, pretty sure I built it according to the instructions.
@geordanhiggins42716 ай бұрын
The 00 and [Q]ant were when they started experimenting with moving away from the advanced ms joints and towards building the frame yourself like with the Nu
@FOXZILLA57346 ай бұрын
The RG exia and 00 is pretty much in the between era of early RGs and the current RGs so they are very in between kits imo, so I would to see bandai do an exia and 00 kits with how they make RGs today, that would be fantastic.
@ParadigmRiki5 ай бұрын
Well we are getting RG 2.0, so let's get some copium that these (and every other early RG kit) gets one
@fishchips51216 ай бұрын
I was kinda shocked to see you call the RG 00 bad, the old review was pretty high on it. I guess new RGs are just that great. FWIW my 00 is still feeling quite good in the hand, other than the shields never staying on unless they're on the 0 Raiser.
@therest92816 ай бұрын
Yeah I used to have this guy, hated it after like a month. The frame just doesn't hold up at all and barely can hold the sword at that point the leg doesn't help need to unarmor it and basically tighten up all the frame. Compare it to the epyon it like day and night cause that epyon hold up perfectly even after the tumble and can pose perfectly fine even after a long time
@Vol_ante6 ай бұрын
Yeah my 00 Raiser is still able to stand with the 0 Raiser attached with good stability so it’s all about how you handle them in the long run
@fishchips51216 ай бұрын
@@therest9281 that's unfortunate, I hope they made some brand new 144 00 stuff soon, namely an RG Exia 2.0.
@fishchips51216 ай бұрын
@@therest9281 that's unfortunate, I hope they made some brand new 144 00 stuff soon, namely an RG Exia 2.0.
@kyrosgallade6 ай бұрын
@@fishchips5121well, 00 isn’t neccesary the most popular series. if i had to put my bets on the next rg 2.0 it would probably be any of the seed suits, since well… they aren’t the greatest, and the exia is actually one of the better early rg kits.
@GojiraFan-in9oo6 ай бұрын
Another early RG for mecha to rage over hopefully it isn't a Justice situation
@NguyenThanhNhut-jy6cz6 ай бұрын
Funny that you used to consider RG 00 Raiser as the best RG out there with the Unicorn, but the RG line has changed so much since then
@ricardorunos97826 ай бұрын
In hindsight, if the 00 XN Raiser didn’t just slap everything on the back, the design would’ve been a tad bit better. Also, have the regular 00 Raiser in a box, since the hips are comically loose now, and the back of the torso where the Raiser unit attaches has come loose too.
@Fayheurblode6 ай бұрын
Wasn't there an arrangement where it had the 0 raiser's binders (and all the XN unit parts fixed to it) on the GN Drives rather than directly on the Raiser unit though ?
@ixiahj6 ай бұрын
@Fayheurblode The official config for the XN Raiser has everything on the back pack. The binders only go on the GN drives with the Raiser on. You can still put them on the drives with all the XN parts but that's more of a fan config.
@ricardorunos97826 ай бұрын
@@ixiahj It sounds like a less unstable, yet still comically top-heavy, setup.
@HaohmaruHL6 ай бұрын
So, just strengthen the loosened joints? Problem solved. This is plastic model hobby after all.
@meikisaragi14456 ай бұрын
This kit overtakes my love for the full saber design.
@teddy80956 ай бұрын
I really want to get the MG, it would look great with the rest of the "new" MGs from 00
@daltonmiller15696 ай бұрын
I was super curious about this kit and my man comes through with a review
@BlashyrkhPwns5 ай бұрын
it's a shame that such wonderful kits like 00 Raiser do not have a chance to get an updated version. Lately I built a RG Build Strike full package and man it looks awesome! but it's floppy,and the only thing it can do is a simple standing pose with an action base attached. I really wish we have the chance to see such kits revamped!
@rahadianramadhan55546 ай бұрын
Tbh i never expected you to review this kit, but here we are. I just built mine a week ago and it's quite a challenge to pose but it's still quite a looker nonetheless.
@johnmichaelreyes45776 ай бұрын
I still remember when they still use ABS plastics for the frame. It was an absolute pain for my nipper, hobby knife and my fingers.
@apoclypse5 ай бұрын
The OG 00 Raiser was my very first RG and the second Gunpla kit I ever built. I had no clue what RG, HG, MG, etc were so when I started building it I was a bit overwhelmed coming from an HG IBO kit. I even tried my hand at painting the inner frame. The look of the kit is great and it sat on my desk for a while. However it's a hand grenade. Parts fall off the thing constantly even by just looking at it. Especially the GN that parts you hang off of the GN drives. I say pose and don't touch it.
@soulfulfakealligator6 ай бұрын
It sounds like your opinion on the RG 00 Raiser changed quite a lot since your original review 8 years ago, huh? 😅
@bismarkeugen68816 ай бұрын
The buster sword looks more like a surfboard, though to be fair, that would be fun looking in its own way.
@magiquemyke48246 ай бұрын
My favorite early real grade model kit. Has everything from bad ass giant sword, to a flying support unit and all those melee and long range weapons.
@VentA_76 ай бұрын
Btw, you can rotate how the gundam holds the double sword by 90 degrees (or have it grab the opposite side of where you attached it) so it can hold the sword and pose like it’d actually slashing the sword.
@nickyboi42376 ай бұрын
Thanks for this review. I've been seeing this kit at the store lately snd have beem debating on getting it or not. This review definitely will help.
@JYMBO6 ай бұрын
Just built the 00 [Q]ANT & it's solid! way better than i was expecting
@AndreaDoesYoga6 ай бұрын
Amazing review, I love the extra gear on this Gundam! 🤖👍
@lllXanderlll6 ай бұрын
Exia was the first RG I got and it's pretty much the only kit I don't really fiddle with very much, the stickers it came with were definitely awesome. There's something really excellent about the markings they use for them maybe it's just the fact they're a nice shade of blue. I've never heard of that particular mark setter but if it works better than mark setter/softer then it may be worth looking into closer
@BronzTheBear_04085 ай бұрын
Hey man, how's your RG Exia doing? Is it loosen up overtime? Or is it still in the same condition as you build it? Kinda interested in buying an RG Exia but I'm kinda scared to spend my money on a kit that probably will loosen up overtime cuz I love posing my kits.
@lllXanderlll5 ай бұрын
@@BronzTheBear_0408 Oh he's totally fine. I didn't really move him around too much so he isn't very loose or anything and it's been about two years since I got him. I tried doing some ground poses with him back then and they didn't really work so I just put him in a standing pose and put him on the shelf. I could maybe see it having issues if you're moving it around a lot over and over but for normal wear from posing now and then it'll be fine
@kamenxxx90376 ай бұрын
with those backlogs mecha has and those pile of boxes in desperate need of sorting out, i think we must commend mecha still capable of building anything
@robymargata53306 ай бұрын
Hoping that Bandai will release a lot of 2.0 RGs.
@EbbFlowe5 ай бұрын
5:00 Is that GG Subs karaoke I see? Or maybe some other fansub group? Idk honestly I remember trying all the different sub groups back when 00 was airing so it could be any of them. Haha damn, that's the real nostalgia right there
@angelarch53525 ай бұрын
Very beautiful! Love this design!
@VentA_76 ай бұрын
Yeah this Gundam definitely looks way better without the jets on, the idea of not 1, but 2 support jets attached to the gundam is really cool, but the final result just looks like the jet sitting backwards on the gundam. And with how cool both the combined jet mode & individual jets look, I think the 00 gundam is better off just posed by itself, maybe with the extra swords, and having the jets by it’s sides
@nismo766 ай бұрын
i already had to glue my rg 00 raiser together cant imagine an even bigger backpack attached, um glad i have the mg instead
@dasersassin87156 ай бұрын
I recently built the RG Raiser and funnily enough, it’s NOT the early RG-frame, it’s the legs connecting to the hips. There is practically no friction to hold the heavy upper body in a stable position, while the knees, ankles, elbows and shoulders are fine. I definitely understand why your hallmark early-real-grade-syndrome is mostly dismissed by other gunpla creators nowadays. They can be symptomatic of a bad kit but more often than not they aren’t the root cause.
@matanm68296 ай бұрын
Went down a whole rabbit hole, never mind the why, just reached a conclusion that the new SEED Freedom's Proud Defender is SEED's take on the 0-Raiser. Saji is Lacus, Confirmed.
@reannoire43306 ай бұрын
Truthfully, the only old RG lines that are passable or good are the 00 and Wing line other than the Gundam MK II, experience wise. It is likely due to the light weighted, but since 00 wants more weapons through variations, then that make sense.
@ChiHinNg6 ай бұрын
I was upset at first when I got the XN kit as I broke the right arm of 00 when posing it, but then I realized the sword in that pose can actually hold the arm up then I dont bother to glue it back or move it ever again
@Henrex20006 ай бұрын
8:02 ummm acksually, the newest RG release is Force Impulse spec ii 🤓
@yoshigokyriya6 ай бұрын
that is just a different color remold 👀
@danieldavis63166 ай бұрын
@@yoshigokyriyait is a main line RG release though strangely enough
@rolandsimondirecto54886 ай бұрын
Mecha, can you review the HG Strike Freedom Gundam and compare it to the Perfect Strike Freedom and the Strike Gundam? Also, I love your content, especially some reviews where you made that grunt when you bent the elbow of that RX-78-2 Gundam from the Gundam Universe line.
@geminas50446 ай бұрын
I'm low-key glad i never had that RG in the first place since i already own the HG 00 Gundam, HG 0 Raiser and the HG 00 Raiser + GN-Sword III 😅
@zeroxexe1116 ай бұрын
Oh the HG 7swrdG was epic it bites that RG couldn't hold up! Love these weapons though!
@gundam00-fn5uc5 ай бұрын
00 Gundam is a great kit at desingning and details
@Leonardo-zt5tt6 ай бұрын
Mine arrived during spring break but I haven't built it. Im probably gonna build it this summer after I finish building my HG Wing kits and The Black Knight Shiva.
@nedmaster10005 ай бұрын
be sure to gloss coat before putting on the waterslides if you are using micro set and micro sol. it really hides the border.
@xxEmmankunnArt6 ай бұрын
ngl, I decided to display the 0 Raiser and the RG 00 separately on their own, saved me a lot of headache
@gundamandyugioh41846 ай бұрын
So I’m watching this after having built the base RG 00 Raiser and how the hell was it falling apart for you when posing it? For me it’s as solid as a rock and I’ve been posing it like crazy. Could it be that you’re too rough with it? Or is it the fact that you detest early real grades that you have a bias towards them? Also they’re GN sword 2’s not GN blades, that’s Exia.
@la0slegend6 ай бұрын
I have this pre-ordered, it's going to join mechs with giant sword shelf currently consisting of HG Dygengaur, and RG Destiny Impulse,.
@findthereal126 ай бұрын
As much as I love the 00 designs, masking all of those clear parts is a pain in the ass.
@Tuna136 ай бұрын
I almost ordered this last month when it was still available for reserveration but decided against it due to the price tag, 2280Y, almost double the price of the base 00 Rider. Not too sure if I made the right decision though since the yen is currently trading far below average.
@froilynemanliclic73866 ай бұрын
Wait What? it was supposed to be read as XAN Raiser? I have the MG version but all this time I call it the X-N Raiser hahah!
@EbbFlowe5 ай бұрын
The katakana reads "zan", but I think it's supposed to be said more like "zun". The Zun-raiser (Sun-riser), perhaps a nod to the production company of the anime, Sunrise.
@adityanoviant81806 ай бұрын
aaah few years ago i had this kit (of course with 3rd party xn extension lol) and who knows that bandai now release the official one ^^ but seriously using old inner frame for this massive kit it will be trigger early syndrom realgrade more faster than regular 00 :3
@Tak_Fuj155 ай бұрын
Will there be HGUC REVIVE MK-II or Hyaku Shiki review? Ya have only the review of Zeta revive so i thought you'll do them too
@branchygiraffe6 ай бұрын
I really hope that that start re releasing pre tallgeese real grades like they are with the Rx78 ngl. Just give us one brand new on and one 2.0 one a year and it’ll be awesome. And hey maybe if we’re lucky they’ll pull out the RG ground Gundam and gouf custom that was originally supposed to release
@WillTDR_RX-00W0-06 ай бұрын
I wish Bandai waited if they would do a 2.0 of the 00 Raiser and then release the XN unit
@zacharyomega72426 ай бұрын
I’m gonna feel bad for the people who read the comments before watching the video. I’ve built the original rg 00 Raiser and compared to my experience with the rg Wing Zero EW I mostly put real grades to the side until I got the Hi nu and unicorn. If you want an honest opinion I’d recommend ignoring the comments and listening to the video.
@chayze30096 ай бұрын
Big thanks for all your reviews! They're an amazing help to find my way through the masses of kits there are, as a Gunpla beginner 😄
@alfrancisodion46086 ай бұрын
Question when the 0-Raiser turn into the XN-Raiser why the two shield wings never attach to the GN Drive of the 00 Gundam it like the whole 0-Raiser jiust attach on the backpack of the 00 Gundam is their a lore on why they don't attach on the GN Drive?.
@ixiahj6 ай бұрын
Wish there was a HG version of the XN parts. Maybe this shouldn't have been an RG and maybe shouldn't have come with the Raiser parts.
@TheYoungMindz4 ай бұрын
I'm surprised the mechanism for attaching the xn raiser actually the same as MG version.. not getting this since I already owned MG version. Except for the sword attachment.
@Blue_FireX0D4 ай бұрын
Does the mg version of this kit have more details?less details?or equal amount of details?
@RogueRonin-3566 ай бұрын
Hay, if you don't mind, can you do an armored puppet review. I would recommend Mr. j, but all of them look great.
@IDasheZ4 ай бұрын
im guilty of throwing handles away on accident lol smh
@jianxiongRaven4 ай бұрын
How does this kit compares to the MG version?
@xxnike0629xx5 ай бұрын
The thing that's odd is that we have an RG for GN-0000/7S 00 Gundam Seven Sword and also an RG GN-0000GNHW/7SGD2 00 Gundam Seven Sword/G Inspection Type. But we don't have an RG GN-0000GNHW/7SG 00 Gundam Seven Sword/G. 🤷♂
@rx-105xigundam25 ай бұрын
@xxnike0629xx the that's more odd is that ...
@rx-105xigundam25 ай бұрын
@xxnike0629xx you spam WISHLISTS , you hoard BOXES ...
@rx-105xigundam25 ай бұрын
@xxnike0629xx but in the end you still refuse to build a kit again ...
@rx-105xigundam25 ай бұрын
@xxnike0629xx in favour of building a BOX fort instead ...
@rx-105xigundam25 ай бұрын
@xxnike0629xx and fire some cheap anti-UC, Turn A, and G-Reco shots ...
@Sazabi4prez6 ай бұрын
"A standing stand", indeed
@Ryhillchibulls6 ай бұрын
I'm ready I'm ready
@nickyboi42376 ай бұрын
Oh no....SpongeBob, what could he possibly want?
@Ejack696 ай бұрын
Day 33 of asking Mecha Gaikotsu to review the Sentinel Riobot Gurren Lagann
@Ray-el7pk6 ай бұрын
The old HG XN is all white and doesnt have part separation on the sword and arms
@OvAeons5 ай бұрын
Hope i get my XN soon, next month maybe :>
@alephbuild01966 ай бұрын
Rg 00 demand after this 📈
@crazymage53166 ай бұрын
They really need to update the exia and raiser line up the the standards of kyrios and dynames
@JAMMD176 ай бұрын
Nothing quite like the old Rg’s…thankfully 😂
@airwolf5586 ай бұрын
Of course it is!
@michaelduran61106 ай бұрын
love it's details
@momostan17146 ай бұрын
hey man, are you gonna do a review on Black Luster Soldier?
@legoblocksnbricks6 ай бұрын
is he perfect grade ver of rg 00 gundam?
@Saidbmx-fj3po6 ай бұрын
Want to ask cause im in curios , is it the advance ms joint solid ? Because back then around 2021 i remembered when i bought RG 00 raiser the advance ma joint kinda loose . Everytime i want to make a pose it did’nt support the weapon (hand) and the leg same too . Thank you for noticing this question .
@hijous3 ай бұрын
nope. it loose
@emmanuelbarrales60246 ай бұрын
Too bad this couldn't be released as a separate option set. Or maybe released as an RG 2.0.
@Dracobyte4 ай бұрын
Cool video!!
@ario84445 ай бұрын
Time for a remastered kit?
@hanazeru5 ай бұрын
looks HG added with advance MS joint
@kyrezz6 ай бұрын
What is your turntable rotating display name?
@_r1r25 ай бұрын
How he hold the buster sword is wierd. Lol instead of slash he will be bonking enemy.
@ThadDePadua99286 ай бұрын
Raiser Moment; went TRANS AM click the video the moment it got released, really needed this, thank you. ;-;7
@keithkeith2936 ай бұрын
Dude, if you are having problems with the joints right out of box, it can only mean one of two things. First, you got a faulty kit, which I doubt highly. Second, given your penchant for playing and generally being rough with your kits, you screwed something up. I'm going with number two. Fact is, I never had a single problem with my RG 00 Raiser. In fact, I just recently sold it for 50% more than what I payed for it. Stop being so rough on your kits.
@HaohmaruHL6 ай бұрын
Well he speed builds kits for the reviews, so his perspective is already quite different from the general modeler who usually takes time to build and polish model kits.
@gundam00-fn5uc5 ай бұрын
have you seen the hg 00 raiser gundam
@PyrusZodiac6 ай бұрын
MG Epyon Sturm Und Drang soon? :o
@vustvaleo80686 ай бұрын
thankfully RG 2.0 is now a thing and Bandai could make redo of problematic old RG kits.
@Claytronpbr4275 ай бұрын
Orrr, they could make good rg kits of things we don't have.
@rahmadahusada39446 ай бұрын
Waiting RG OO Raiser 2.0 its gonna be Long Wait cuz the list of early RG its so many 😅
@jercsgn6 ай бұрын
I just started in this hobby and this makes me want more! haha. I just uploaded a video as well.
@ExiledGundam6 ай бұрын
Bandai kinda screw up the face vents of this and RG Astray Red Frame
@sirkingcrumpet18136 ай бұрын
Honestly I wish they had left it until they did a 2.0 gundam 00 raiser like the upcoming rg rg-78-2 2.0. The 00 gets so bad very fast
@jayempreem6 ай бұрын
Candidate for REal Grade 2.0
@VoidTemplar6 ай бұрын
my 00 raiser rg also is suffering from the early b frame problem.
@kingio11846 ай бұрын
another fire vid
@danielsgames88106 ай бұрын
Can you use the rg version with the hg version?
@kira5166 ай бұрын
No
@kamenriderovant96766 ай бұрын
A RG that doesn't improve on the MG aspects. XN Raiser is supposed to have a long handle. Not a handle in the middle of the GN claymore.
@GUND-Dork6 ай бұрын
That ERGS bs needs to stop, ok. Just because there was something bad about the early part of the RG line doesn’t mean it’s the only line that had problems up to a certain point. MG had something similar, HG had its issues, and so did PG.
@wakaneut6 ай бұрын
Does it still have the early real grade syndrome?
@LoliconSamalik6 ай бұрын
Yes. Out the box right away....
@muhammadhidhir27125 ай бұрын
Sun raiser
@Roscodatosco5 ай бұрын
Psycho zaku when?
@jaycemeijin1266 ай бұрын
Nice
@rikvanengeland1376 ай бұрын
19:17 If D.O.T. (Dropping Over Time) is your problem, so why are you not using a joint strengthening marker.🤔 Even I am using it for my 1/100 MG Qan(t) Full Saber, and from a few other reviews that I have seen, some said that the Full Saber had a weight issue when it hold up a bigger weapon than it can handle. So when I built it, I prepared myself for this and used the marker on the important joint parts in the arms.
@Nairb10076 ай бұрын
00 Raiser and Exia , banging that same ol Drum yet no MG Reborns at all. Enough of the Exia's already.