Galaxy S23 Ultra GATATOL Ultrafit tempered glass screen protector - Install & Review

Buy on Amazon
Gatatol Glass with liquid adhesive - amzn.to/3kfbjHQ
Thanks for watching!
Follow me on
Instagram - / hightechcheck
Twitter - / hightechcheck2
Facebook - / highttechcheck
Subscribe - / hightechcheck
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the Amazon product links, I’ll receive a small commission. This help support the channel and allows me to continue to make quality content!
@SamsungUS @Samsung #galaxys23ultra #galaxys23series #galaxys23 #galaxys23plus #samsunggalaxys23ultra #samsunggalaxys23 #bestandworst

[@youandiryan]

Great video. It appears my install is going flawlessly so far thanks to your video

[@nickevans3190]

Hi I really love your video reviews about screen protectors what's good and what's not good however I tried your method of taking the red cap off twisting the little black tab off and turning the other end and got the glue leaking everywhere totally messed up completely, I went back to the amazon UK instructional video and they show keeping the red cap on and twisting the other end off and hey presto the glue just flows out nicely with just a tiny squeeze and doing it this way NO seeping leaking glue all over my fingers and everywhere else, doing it this way is much easier

[@huzidamasta]

Really, really helpful video. Thanks a lot dude. Watched it from start to finish three times, then the fourth time I followed along, pausing the video when necessary.......did it first time!!! Really pleased. Seems very solid and secure and fits cleanly with my case. I can see why this isn't for everyone though as it takes some patience and time which people don't seem to have/want these days. It said in the instructions that "99.99% of failed installations are down to not following the instructions" and I can totally see that. Just a tip for anyone planning on doing this - don't clean the screen first....there's too many other bits of preparation to do and you risk dust getting on the screen. The best time to clean the screen is just before you insert the phone into the already prepared guide. Also the glue only comes out once you've twisted the black end, so you can even prepare the glue before cleaning the screen. In other words: 1. Prepare the guide 2. Put sticker guard on phone 3. Prepare the glue 4. THEN clean the screen 5. Immediately put the phone in place 6. Immediately twist prepared glue 7. Immediately apply glue to the screen 8. Immediately peel off the sticker from the tempered glass and place it on the screen 9. Continue as shown in the video That way there's very little time for any dust to land on it. That's what I did anyway and it's flawless.

[@HighTechCheck]

Awesome Sam! I’m really happy to hear you had such a great experience. Thank you so much for the tips as well and for your support!

[@christopherwilhelm6801]

I put on screenprotectors right after showering hot in the bathroom. The steamy air prevents dust, so you can take your time and dont be super fast with everything.

[@huzidamasta]

@@christopherwilhelm6801 that's genius! I'll remember that for next time 👌

[@iloveyoushima]

@@christopherwilhelm6801how long did you wait from turning the shower off?

[@hammeriq]

Thank you so much for the video

[@lunargalaxy6742]

Does anyone know if this screen protector works with the otterbox defender?

[@kaitophung2635]

Just installed this yesterday, holy it’s amazing

[@RealSwankyToad]

I made two attempts at installing this protector and both times, the protector started to lift after a couple hours. I'd like to think I followed the instructions to the T but maybe I did something wrong?

[@Mob3tta_01]

I did good my first try I had a air bubble but I was very patient and worked it out.

[@kingrob9993]

I had the whitedome and amflilm tempered glass on a few previous phones and oh man are they nerve racking. I need one asap for my S23 Ultra but I dread the process lol.

[@Mr.NotYourPALGuy]

I hear ya. Just something about putting liquid on a twelve hundred dollar phone. That's why I've always gone with the dry install film.

[@zuezsz]

@@Mr.NotYourPALGuywhich screen protector u using on the s23 ultra?

[@Mob3tta_01]

​@@Mr.NotYourPALGuyI watched the installation process in slow motion and was very careful and so far I love it better than my last glastic screen protector that scratched rather easily and started to slightly lift in the corners this one I will give a 👍🏽👍🏽👍🏽

[@PATRIOTxVIRUS]

Bought this because of your video. Helped out a lot. Thank you!

[@LarrysWelt]

and now?

[@PATRIOTxVIRUS]

@@LarrysWelt I hate it lol

[@LarrysWelt]

@@PATRIOTxVIRUS nice i bought this because of your comment...helped a lot. Delivery tomorrow

[@ExE-Merc]

Great Video ! Does this brand also have a private Glass version ?

[@keithwilliams5500]

yes it does

[@hammeriq]

Thank you But, what is the name of the case you're using ? If you don't mind me asking

[@HighTechCheck]

Not at all, it’s a ringke onyx case

[@princesspp6802]

Is the mowei clear tempered glass the same as the gatatol clear tempered glass ? Got 2 packs of moweis but got bubbles on all of them lol.... Should i try the gatatol one ?

[@Blueknight1960]

You should take your phone to someone who knows how to install a screen protector.

[@Bush0369]

Who ? Are you talking like her representative at a Verizon store for example because there's nothing differentiating that person from us if you've ever seen them put one on before they make mistakes just like we do

[@princesspp6802]

@@Bush0369 no I mean myself. I got 2 packs aka 6 pieces of moweis and I followed the instructions everytime, at least I don't think I did any mistake. And it's not mu first time doing it :p

[@jermaineanderson4732]

I scanned the QR code and watched the video and there was no moving back and forth of the UV light. I followed the video to the letter, left my case off overnight. Next day, put my case on, within a few days, the bottom left and right corners started to come up. Took it off, cleaned the screen and tried it again. Same results!! And that adhesive smells awful! So, I went back to a regular old glass screen protector and no problems since installed, two weeks ago! I will not be buying this liquid adhesive kit again!!

[@pettigrew95]

It is literally impossible to get this screen protector installed without any dust underneath due to the amount of time it takes to prep the screen and apply the adhesive prior to laying the screen protector on top. My OCD will not stand for this.

[@ahmadramzy2716]

if you have a sticky tape you could just pick any particles from the screen after you put it down, i am not advocating for this kind of screen protector though, just thought it could be helpful, i bought the s23 ultra few weeks ago, tried a bunch of screen protectors and non of them worked for me unfortunately and just decided to go with the phone naked

[@Mob3tta_01]

I didn't get any surprisingly

[@ryanj7986]

What, you mean you don't have a hermetically sealed clean room with negative pressure ventilation and a tyvek suit? What a peasant. Jkjk tbh my house tends to be pretty dusty so I would almost always have that problem when installing screen protectors.

[@Bush0369]

Oh man I totally get the OCD comment, Ive been researching screen protector for this damn s23 ultra for a long while now. Can't stand the ones with the finger print circle ...so ugly and they slide off the phone ...help lol

[@Mr.NotYourPALGuy]

How did this compare to the White dome version?

[@Mob3tta_01]

I could never get the white dome right but it's been a few years since I tried. I like this one though

[@black.bird.]

Also this one Currently unavailable

[@Mob3tta_01]

See the video I watched didn't say that about the red cap I had to squeeze so no wonder I got a air bubble smh

[@xMalinowy]

No gap on screen? Do you recommend this curved Glass? I Have to buy like this one

[@xMalinowy]

What about in etui?

[@Rako23er]

I bought it and have just used it. It really works without any problems. The fingerprint sensor also works without any problems.

[@xMalinowy]

@@Rako23er its fits in etui?

[@Rako23er]

@@xMalinowy yes, i use 2 different cases, 1 slim case and 1 bigger case i have no issues.

[@loperatm70]

Will it make any damage to my s23ultra if while applying a tempered glass I mess up and Crack the protector? :(

[@HighTechCheck]

How would you crack the protector while installing it? If you install it like I did in the video you should be fine.

[@Mob3tta_01]

I agree. I say type in the name of the screen protector in KZbin and watch the installation video the scan card had it in another language and watch his too. But yeah it worked for me and I'm clumsy 😅😅

[@TeddyAM]

Is it not necessary to tape the speaker opening before installation?

[@GianCarloVictoria]

It is. You don't want glue to go in there. All buttons and openings must must be covered. S pen must be removed

[@Mob3tta_01]

I didn't and mines is fine

[@mariosandoval9290]

Love my 23 ultra but these damn curved screens just aren't it. I've yet to find a case friendly protector. Hoping Samsung leaves the curved screen fad soon.

[@AzeroxDoomraider]

Exact same package as the Mowei screen protectors.

[@ZAYFLX]

All that procedure for a screen protector???? I’m not sure if it’s worth the hassle lol

[@Mr.BananaManYT]

it is if you want a glass screen protector.

[@ZAYFLX]

@@Mr.BananaManYT aren’t the most top rated screen protectors tempered glass? I don’t see the worth in installing this with such procedure. He pointed out some lint/dust that was caught during the install

[@Mr.BananaManYT]

@Zay Will well with the in display finger print scanner its hard to make a glass screen protector without that annoying circle, a liquid installation can get rid of that issue

[@HighTechCheck]

It’s all true

[@ZAYFLX]

@@Mr.BananaManYT got you, makes sense now

[@thatdudecurt]

Yep, as soon as I saw the hole for the fingerprint it was all Whitestone Dome for me.

[@huzidamasta]

There's no hole dude!

[@reinoldi1097]

thats a sticker... it comes off after install...

[@dannok3315]

how do you clean the glue of the screen when the protector cracks? Tempered glass is the worst for curved screens. I would never put any kind of liquid on my screen, and ruin it!

[@HighTechCheck]

You just need to carefully work a credit card or something all the way around the protector until it releases.

[@dannok3315]

@@HighTechCheck what happens with the glue that was used after you peel off the tempered glass?

[@HighTechCheck]

@@dannok3315 it stay on the screen protector, the screen of the phone is left pristine.

[@dannok3315]

@@HighTechCheck thanks

[@mihailaurentiu5050]

Is it compatible with Spigen cases?Cheers

[@hassanhosein2708]

this is the worse tempered glass, I bought this and I cured for 20 mins and I put on my case and it started raising on the corners

[@HighTechCheck]

Why did you cure it for 20 min?

[@huzidamasta]

​@@HighTechCheck my thoughts exactly. The first thing the instructions say is "99.99% of people that don't succeed in instalation don't follow the instructions correctly." Enough said really.

[@Mob3tta_01]

I didn't reregister dont remember alot of my passwords so i left it alone😅

[@holymungdiver]

Wait you're going to go through all this trouble with the UV glue and still have a circle for the fingerprint sensor get out of here what garbage

[@reinoldi1097]

thats a sticker... and comes off after install....

[@zenpai_ian9334]

Haha dont waste time puting screen protector just go to mobile outfitters its a ferpect film protector

[@UNBOXALLTHING]

i really want s23 ultra, but it dont have a good screen protector they just made rubbish. I'll wait for ip 15