Samsung Galaxy S23 Ultra Whitestone Dome Tempered Glass PERFECT Installation Tutorial!

[@bowball_]

Thank you so much! I wouldve never been able to do this- so tired of wasting money on cheap amazon screen protectors that either obstruct the fingerprint senor or are film. I was hesitant to try this but it went amazing. Thank you again for the video!

[@letmesleep1801]

Man, what I would've do without you! Thanks to your thorough installation video and I had installed my Whitestone Dome Glass smoothly! You saved me. I also appreciate the extra tips regarding touch screen sensitivity settings and the fingerprints. Stay awesome!

[@woodcutter4481]

Used this for about 3 years with great results on my Note 10 plus. I had already purchased this for my pre ordered S23 ultra and needed a refresher on installing properly. I made a minor mistake with liquid and ended up using spare tube. Glad they give you some extra. Protector came out perfect. Thank's for the video!

[@davidh8755]

Followed this video and mine came out flawlessly...thank you 👍. Perfectly aligned, no bubbles, and fingerprint scanner works perfect too. Good video man thanks again !!!

[@krzysztofbogusawski2041]

I've had whitesone glass on my Note 20 Ultra, now I switched to s23 ultra and wanted one on it immediately. Thanks for the perfect tutorial! It went flawlessly. Glad Whitestone changed the fram design, it's much easier to distribute glue now

[@jralphroman]

I discovered your channel for the installation of the s22 ultra Whitestone and even gave a link to it on my Amazon review.... with that said you've been a good follow both on KZbin and Twitter.. I respect your content

[@TMProjection]

ok now can you do a video of you removing it? thats the important part, reusability / replacing the screen protector

[@Nyxeme]

Euh, just lift it? It's not glue

[@PrinceInShadow]

Its glue 7:57 ​@@Nyxeme

[@Kuteckitten]

Yeah , I want that too as there is a myth that uv resin hardens after a year and then if it's not changed it damages screen or gets stuck to glass

[@neoasura]

It removes fine, I had this exact screen on my phone, it started coming up on the edges (over a year) I just lifted it off like peeling those plastic protectors off of new screens, no residue, no glue, everything is fine.

[@Fernix93]

@@Kuteckitten I had mine for a year and came back to install another one. No damage on my screen so far.

[@jeringeorge1912]

I'm from 🇮🇳 and just installed it today following your instructions! It works perfectly! 🙌🏼 Thanks a bunch!

[@darleenbrown3218]

This is the best detailed oriented video out there. I just installed my screen protector, and it is flawless even the fingerprint sensor works great.

[@susanmcmurray6215]

I put this Dome Glass screen protector on my S23 Ultra, using a different KZbin video in March. Since then, my protector cracked (at least it wasn't a cracked screen!) and I found your video to put on the second protector from the kit. I don't remember which tutorial I used before, but I KNOW yours is SO MUCH EASIER and nearly foolproof. Thank you for posting this and helping me install a flawless screen protector on my S23 Ultra!

[@stephanieworrick5635]

Omg, thank you so so much! These types of protectors scared me so much. I've tried a few other protecters and they've not been up to the job at all. Watched your video and saw how easy it was, ordered it straight away and I've just applied it perfect first time!! Thank you for giving me the confidence to do it xx

[@teste-yh5df]

what job bro, this screen protector does not protect against impact, edge screen is fragile. What is your point

[@urim225]

​@@teste-yh5df i think he meant he is scared to install them because the process is a bit complicated and not easy to do

[@aacdallas88]

Thank you for the video! I normally don't use screen protectors but after hearing from a few people that the S23 Ultra screen is not as scratch resistant as previous generations I am going to have to get one bc hell to the no to scratches haha. I am going to get this and try it out :D. I thank you for making the video longer - some processes call for it. I don't understand how some videos are like 2 minutes long for a process that takes way longer than that lol.

[@nequastar1826]

I know it's 7 months late, but how'd it go? I use plastic screen protectors on my ultra but I've heard mixed things about these.

[@morgannordahl4355]

Thanks! Came out perfect! I've been putting this off for months.

[@the3mcbees]

This video was awesome. I don’t think you could’ve done it any better. I was kind of terrified putting this on with glue, but you really helped. I am so happy with this screen protector.

[@broccolibronco]

Thanks so much, I was so worried when I read the instructions it came with, but your video made it so easy!

[@izqa27]

I couldn't thank you enough! Thanks to you I just finished installing the glass on my new s23 ultra. Loved the video! Thank you so much!

[@ASlaveToReason]

hands down best tutorial, thank you so much

[@darksoul0605]

Thanks to your guide, this was a really smooth and easy installation. Thanks!

[@WhitestoneDome]

You made PERFECT video for the PERFECT installation. We appreciate the efforts you put on for this video👍

[@TechnicallyTee]

Thanks much appreciated!!

[@zihanwang686]

I rarely leave any comments under a tech review video... But I want to say thank you for this wonderful video! I followed and had a flawless installation. God bless you and merry Christmas!

[@jonvaliagas]

Always been curious about these, thanks for this.

[@toneloco6515]

Big thumbs up! Followed your easy to understand instructions and everything went very smooth! Thanks again! Legend!

[@wangtang12]

Your installation video is flawless. Thanks for the video.

[@TechnicallyTee]

Glad it was able to help out!!

[@humblelabor]

Thank you so much for making this video. My installation looks flawless. I followed along with your vide, pausing between steps. I also appreciate the way you explained so that I knew the purpose of each part and sticker and step. That helped me understand the process to get a better result.

[@phalbaby16]

Thanks for posting this video!😊 It helped me put the glass protector for my phone.

[@rhystownsend1580]

Worked perfectly. Thanks a million :)

[@AapeliSeveri]

Thank you so much for this video, the install came out perfect on the first try so I still have a spare for when this one inevitably breaks! Amazing tutorial 💯

[@rohannmishra]

Thank you for this guided video. Installation was great.

[@TechnicallyTee]

Glad I was able to help!

[@TimelessTalesfollow]

Is it compatible with spigen cases?

[@JConner1864]

That was AWESOME!!! Thank you soo much for taking the time & going through that perfectly......

[@OldDominionEDC]

Extraordinarily helpful! Many thanks!

[@MuiKaHo]

dang flawless install, thanks a bunch!

[@gn0stica536]

You don't use the third absorbtion pad at the bottom?

[@figit090]

Thanks for the nice walkthrough, Tee!

[@whtcivic93]

Thanks, had to use this video for the second time just now.

[@DimLed1980-vt2mm]

Superb! Thank you so much for this guide

[@Gibson.the.labrador]

Great video man, i had a green S23 ultra that i had a very very sad accident with and ended up absolutely wrecking the screen, i didn't have a screen protector on it or any insurance. it was basically ruined. After that $2000 dollar mistake I ordered the special edition Red color and before i even powered it on out of the box i used your video to install this protector and it turned out great, no bubbles no issues at all it looks and feels absolutely flawless.

[@wireless1235]

Im so glad to see some Android content coming to your channel again.

[@forgamingpurposes1920]

Thumbs up! too simple yet most logical tutorial among the rest!, just installed mine...all good, just hoping will be all fine on the next days

[@George_WiSe]

Greetings from Greece, thnx for the help!

[@tomrohan8480]

Bruv is this case friendly specially Spigen cases

[@sallywebber1844]

Thanks so much. Flawless.

[@jokko69]

Excellent! Thank you

[@edtronel2955]

I normally just get plastic screen protectors and i absolutely butcher this . Used your instructions for my first glass install and it came out absolutely flawless. Thank you

[@AlphaBravo860]

Thank you. You help me out a lot. I was watching another installation video originally but they must have upgraded their kit because the Lego piece is not there in the other videos. And the top black piece that goes in the Lego piece also looks different. Your video is the updated version

[@DaveSmart28]

Tee my man. It came out flawless

[@Paul.C.Barreto]

As you said, "Flawless finish". Thanks for this very helpful video.

[@antwanfurman3546]

Flawless install thanks to this video!

[@aakeister]

Thank you, that worked flawless ly

[@amersf7589]

Thanks for the guidance. Mine came on flawless 😍

[@marymadigan9707]

Great installation Tee 😎🇮🇪👏

[@TechnicallyTee]

Thanks much appreciated!!

[@antoniostsaousis198]

Worked great. Go step by step and take your time

[@rampakeshbharat1938]

brilliant video, many thanks ...

[@amd098]

Much thanks, got mine on perfectly on the first try!

[@jamarbrown9694]

Thanks for the information. Flawless process for my S23 ultra...

[@TechnicallyTee]

Niceeeee hope the video helped out!

[@TheMadSmoker]

Bro you nailed this

[@nursebedbe]

Your video is great and very easy to follow tyvm . God bless

[@RmoneyENT]

Great video. This is the best screen protection for the s23 Ultra very informative.

[@tomrwills]

Thanks. This worked great. I realized we didn't use the bottom pad, but it didn't matter on my install.

[@Stounage]

hello, what case do you recommend with this screen protectotr ?

[@kaiichinose9590]

Awesome video brotha. I've been using Whitestone on all my ultra displays since the s20ultra and when done correctly they are by far the best I've ever used. Now with that said for my iphones I use ESR Armorite tempered glass screen protector and that has been the best for that. Loving my s23ultra and 14pm but now I daily the ultra. Also when I install the white stone I tend to use the UV light for double the time after I take it out of the holder the first round and clean down any residue. I typically do this at night before bed so it will hardend more before I put my case on it. Also if you haven't tried it I actually and liking the samsung silicon strap case I got it free along with the leather case during pre order. Also had to pick up that esr kickstand case and spigen zero one edition which cleaaaaaaan. No issues with fingerprints either as I just do both 4 sets of prints. Two sets with both thumbs and then one set with each thumb separate and it's works like as if nothing was there.

[@jakefriesenjake]

What do you mean sets? I have the S23 ultra, I have 4 prints. Each thumb and both pointers.

[@kaiichinose9590]

@Jake Friesen sbc 381 so you can set up to 4 different finger print profiles. On two of the sets I do both thumbs about 50 percent each thumb on each of these two sets. The last two sets I do each thumb independently.

[@jakefriesenjake]

@@kaiichinose9590 I understand now. Saw another video about this. With one print, add both thumbs, (mix both thumbs, alternating) another print, add both thumbs again. Print 3 is a thumb, print 4 is the other thumb. This way, the system might get a match easier on the first scan, rather than going to all prints.

[@kaiichinose9590]

@@jakefriesenjake yeup exactly. I didn't do a great job of explaining. Haha

[@6Rhyme]

Bro, excellent video . This was super usefull 👌🏻👍🏻

[@C02B1]

Thank you, sir! Great job! ;)

[@adriands2189]

The spen with this protection works well?

[@williamabaker12]

Just finished installing this on my S23U. Man, I'm happy with how it turned out. Follow the directions, have a little common sense, and it ends up perfect. This was my first attempt at installing one of these and it ended up perfect. I probably over did it with the light, running it across the phone 5 times, but my OCD wouldn't let me stop. 😂

[@nequastar1826]

4 months later, how's it going? I use plastic protectors but I'm considering maybe trying one of these in the future.

[@niknik378]

perfect tutorial !!

[@jpherediabx]

Besides the connection port, the fingerprint pad looks like the switched to ultra violet light. Great installation, my guy!

[@pryinco]

Thanks bro

[@stevehan3809]

Thanks a lot for your great product review. Steve Han from Whitestone.

[@yjk94]

So when you remove it later, is there a glue stain/residue on the original screen? Does the glue affect/hurt the original screen in any way?

[@azimqayyum89]

Fit spigen case? Im using slim armor

[@passivaggressor]

Thanks bro. Used this for my note 7.

[@robchesley4591]

Is an absorbance pad not supposed to be in that bottom slot?

[@JogBird]

omg thats so complicated... is this a permanant install?

[@TechnicallyTee]

It's honestly not that complicated, it's actually really quick and no it's not permanent. You can take it right off clean even with the glue on the screen.

[@willwroten4871]

I'm curious on the easiest/way to remove the screen protector

[@cloudstroz]

Using this on my s22 ultra, with dbrand grip case . Best combo for me .

[@TechnicallyTee]

Yeah the dBrand Grip is always one of the best. Video on that coming soon this week.

[@codejunki567]

Any issues with the camera lenses getting scratched?

[@valdiharrys8926]

bro btw how to remove the glass later ?

[@TechnicallyTee]

I did a KZbin short on the removal of the glass. It comes right off without any issues. Glue is not left over.

[@Doctortech1]

Do you know any cases that are compatible with the whitestone dome screen protector on the s23 ultra?

[@m.b.557]

Love the iPhone vids, but as someone who prefers Note-style phones as my main daily, videos like these are truly helpful. I just ordered a pack of these and the tutorial video on Amazon sucks compared to yours. If you decide to slap a skin on it, I would be interested in that video as well because I can never get it right. Thanks again!

[@JoseRodriguez-ty5lg]

Great video. Installation went perfect. Only issue I have a small dustbin one of the corners. Can I lift it and use something to get it off and the glass will stick back on like other screen protectors ? Thank you

[@hbhavsi]

Hey Tee, great video as always. Do you plan to do an AmFilm video for S23 Ultra? It seems some things might have changed since last year, and wanted your take on it before deciding between Dome and AmFilm. Thanks a lot!

[@nicolasdovis1915]

is this compatible with casefity covers? (i have the snake one)

[@jeromegold3216]

Great content. Question. How does the white stone dome screen protector work with the supcase unicorn beetle pro or the I-Blason Armorbox. Becouse every time I used a glass screen protector, they would always lift when I put those case on my note20 ultra. It didn't matter what brand screen protector I used. Update. I finally got the Whitestone dome glass screen protector, and thanks to your video, I had a flawless installation. I used the supcase unicorn beetle pro. The screen lifted a little in the corner, but the next day it was back to normal. Now my phone is in the otterbox defender pro, works perfectly.

[@AncientAdventures]

Great Video! I just got the s23 ultra and i used a different screen protector starts with a M , anyway the install was easy and came out perfect. However, within a few days i had a crack on my screen which i havw no idea how that happend. I have been so careful. Anyway i should have known better and just got this one again! It worked great with my note 10 plus! So, now im buying it. Does the one in your link come with the camera protectors?

[@TheBeginningOfNewMe]

Thank You! I was able to get right the 1st time. I have tried to use these screen protector before but end up messing it up. How little trouble getting the fingerprint setup. Someone suggest slightly licking my thumb and that actually worked lol

[@niclaslindvall3095]

Does this fit the 23 ultra with dbrand grip case?

[@musaiyabahamed6859]

I was searching for info instead i got a good rap 😂

[@AceGoes]

I’m actually first, hollllaaaa! Thanks for the tip! Don’t have an S23 but I like watching all your vids

[@r1chard874]

thanks! was very helpfull to me! Consider another S23 Ultra, protected!

[@Vordigon1]

Meanwhile I just slapped on a Spigen screen protector on my s23 non ultra for 2 minutes with no issues. Does this screen protector have some kind of additional protection from a normal tempered glass screen protector?

[@voodoochile333]

What happens to the glue and screen if you need to replace the screen protector?

[@t0008624]

@TechnicallyTee Can you advise me on what I’m doing wrong with the glue. I followed the instructions unscrewed the pink part first and then unscrewed the black part second. However when i unscrew the black part only a minute amount of glue is coming out. 2 of the glue sticks were like that. I made sure to unscrew them fully too

[@adityaupalkar007]

Hello Tee, hope you have been doing great. Waiting for your customization video 😁✌️

[@TechnicallyTee]

O yeah for sure. I think that will be coming tomorrow. Still have to do a few more things.

[@shadow7037932]

Pro Tip: If you have a bulb blower (the type used in photography) it helps a ton. Same with a Lens Pen (used for cleaning lenses). Both of these will help a ton in getting the phone clean, especially if you're applying it to a used phone.

[@DarkoDDragon]

little sratches can be invisible after this or ? i mean really little have my s23 2 weeks and now little sratches

[@Rinos-1987]

Can someone help me why I have a colorful reflection at the top of the camera and at the top edge with white backgrounds?

[@bsmoove69]

I just got a 3 pack of them cheap tempered glass screen protectors and loca gel and did the same thing for $14. Do basically the same thing for installation without the frame of course and after the gel spreads on the display take the phone outside in the Sun to harden the UV loca gel

[@hbhavsi]

Was it the Milomdoi brand?

[@bsmoove69]

@@hbhavsi HTwon was the brand

[@jond2720]

Do you use a case? I use a bumper case and am having a terrible time finding a compatible tempered glass screen protector

[@Vladyugi]

@@jond2720 Hello, have u tried the Mowei screen protector for the s23 ultra?, as i want to buy it but afraid it will peel off with cases

[@jond2720]

@@Vladyugi no I haven't. I bought the Gatatol one but it too didn't work with the bumper case. I have still kept it on for now, bubbles and all. Someone said to forget the bumper case and install a lighter duty case but I refuse to do that. At this point I'm going to wait for some brand to release a proper screen protector. Or else go for the Whitestone Dome.

[@Howie_fish]

Hey man question. What's the fingerprint accurate rate after the dome glass install. Last year, I got the s22 ultra and couldn't handle the accuracy rate and I end up using a film screen protector for a while. Then I saw a video and amfilm had the metal weighed cylinder and even that the accuracy rate isn't the best. Definitely better then last gen whitestone

[@TechnicallyTee]

I have had zero issues with the accuracy with it being installed because trust me, if I did it wouldn't be on my device.

[@Howie_fish]

@@TechnicallyTee yea man lol that's why I watch your videos.

[@GhostDog54]

Also Tee so you know anyone who needs or wanted that for the S22 Ultra? I have 1 all brand new in box chilling

[@Blueknight1960]

This video is a year old and on the box in the video, it says S23 ultra. I ordered one for my s23 ultra about 5 months ago, just now got around to installing it but, the box has s22 ultra. It fit but it doesn't go edge to edge or top to bottom. The plastic phone holder did have s23 stamped on it though. Oh yea, the pads you put on the side of the plastic phone holder, one also goes on the bottom which you didn't use.

[@DaveOsborne-e7r]

From a guy with adhd, thank you! I was about to have a anxiety attack trying to figure this out, thankfully I found your video.