Рет қаралды 4,060
Scroll down for links.
In this video, we’re walking you through the installation of Longride saddlebag holders specifically designed for the Triumph Speed 400 and the Triumph Scrambler X, two of Triumph's latest models. These bikes may be more affordable, but they still offer the quality you expect from Triumph.
We’ll also be showcasing one of our iconic Racer saddlebags mounted on the Speed 400. If you're curious to see more setups with the Speed 400 or Scrambler X, be sure to check out Longride.com or Longride.fr.
A few notes on the installation process:
Always refer to your bike’s manual for the most up-to-date instructions, as there might be small differences across models. We’re working on a 2024 Speed 400.
When removing the grab rail bolts, don’t unscrew both sides at once-only do one side at a time to avoid the rail falling off.
Triumph might have applied some glue to the bolts, making them a bit tough to undo. Be careful to avoid damaging the bolt heads.
You’ll need a Torx bit to remove the stock bolts and an Allen key for the replacement bolts from our kit.
If all goes smoothly, the install should take about 5 minutes per side.
Feel free to like, comment, or ask any questions you have about the installation, and don’t forget to follow us for more content on upgrading your ride!
Purchase the saddlebag holders for your Speed 400 or Scrambler X here:
longride.com/c...
The Racer SK featured in the video:
longride.com/c...
LONGRIDE US & International store:
longride.com
LONGRIDE FRANCE, Belgium and Europe:
longride.fr