GameCube HDMI Mod

FULL SOLDERING WALKTHROUGH: • Behind the Scenes - Ga...
FULL DOCUMENTATION: docs.google.co...
Today the GameCube's 480i analog output is looking very dated, luckily there is an HDMI mod to make it fit in with your modern TV.
Purchase:
www.knjn.com/Sh...
PLEASE NOTE, that you must purchase Item#6117, Pluto-IIx XC3S200 HDMI, pre-programmed for GCVideo DVI.
Original GitHub Guide + Menu Instructions:
github.com/iko...
Music Credit:
'Dawn' Pt. 2, Mr.SuicideSheep - • 'Dawn' Pt. 2 (An Ambie...
(I really wish I hadn't used that music)
____________________________________
Sam Campbell or "The Modding Room" makes no representations about the accuracy, reliability, completeness, or legality of the activities, techniques or modifications shown in this video or the results to be obtained therefrom. If you choose to engage in any activities described in this video, you could potentially void any warranty you may have on the equipment or software you use. Your actions could also be in violation of certain provisions of the agreements you have with the manufacturer(s) of the equipment or software you use. You are solely responsible for adhering to any intellectual property laws and usage restrictions applicable to such products and any other products you may use.
Under no circumstances will Sam Campbell or "The Modding Room" be responsible for any loss or damage, including personal injury or death, that may result from your engagement in the activities demonstrated in this video. You also assume all risk and liability that may result from your engagement in such activities

[@slayerofgoats]

That was the most intensive warm up of a soldering iron I've ever seen.

[@hppypandax5454]

Haha I read this comment before the ad finished and cracked up the whole intro

[@john005_]

I hope that this gentleman is still actove 2 years later. Happy Canada Day Mr Campbell.

[@SamCampbell]

Thanks! I am working on new videos it's just become a slow process because of many other things going on at the moment

[@john005_]

Sam Campbell alright. I did send you a form true google. I am canadian too. Probly want next month

[@jevansturner]

Give your HDMI mod twice as many lines of detail to work with: You need to hold B button when starting the game to enable progressive scan 480p!

[@STE7ELEGGPRODUCTIONS]

that was the best way to get all ur headphone users angry right from the start

[@chileanguyfleegman]

pumped*

[@RealMarkarama]

This was a fantastic tutorial I used to get my GameCube modded! I've had my GameCube HDMI modded for about a year and it's a great solution if you don't wanna find official GameCube component cables.

[@chileanguyfleegman]

How's the resolution? what is you general experience?

[@RealMarkarama]

@@chileanguyfleegman It outputs 720 x 480p I believe, just like it would if you are using the gamecube component cables. You should be able to check the resolution output in the options menu that comes with the chip. I've been using my modded gamecube for a couple years now and it's been working great! The picture quality is as good as it gets I believe without using an emulator or external upscaleres such as the framemeister or the osc.

[@techblade837]

Finally I couldn't find dam near any info on this a few months ago. Thank you!!

[@jevansturner]

10:35 "Input: 660x448i 60" The overwhelming majority of Gamecube games support native 480p output! Hold B when starting the game, and then set the game to generate native 480p output. This way the mod won't need to *convert* 480i to 480p. I believe it even saves your preference somehow. It might be a system-wide setting, or maybe only remembers your preference when the game has a save on the memory card (I'd have to experiment again to be sure). I owned component cables that I had purchased directly from Nintendo back in the day. I finally sold it last year since I plan to add HDMI.

[@o0julek0o]

Good music choice. Quiet nights is quite the tune.

[@NotOrdinaryInGames]

Might as well ask. How does real-time deinterlacing of 480i or 576i signals work? My TV does it SOMEHOW, and does it very well, but I want to know HOW.

[@theburntcrumpet8371]

Thank you so much you brilliant, brilliant man. Just sent off for the Pluto board, pre-programmed with gcvideo

[@RestorationRelaxation]

Great video. I have a quick question though. Did you use the 30 gauge wire for the points from the digital port? I have extremely thin wire lying around but I'm not sure what gauge it is...it looks about the same to what you have in the video, but would it cause any problems if it's not the exact same size? I ordered an FPGA but they're back ordered right now :( I appreciate your help!

[@SamCampbell]

Yep I used a very thin 30 gauge wire for all of the digital port points

[@danielsimon669]

I would love to have the component cables, but the RGB cable puts out a quite impressive quality signal. No need for that.

[@tacoconch7678]

Did you have to program your board? Mine didn't come with the white serial connector like yours. I think maybe they sent me the wrong board as I double checked all my connections and I'm still not getting a signal.

[@WiltshireTutorials]

Hey Sam! I just completed this mod myself, except there is one small issue. I cannot get the 480p Progressive prompt to appear while holding the B button on boot up! I have tested it on multiple progress scan compatible games. Do you think it is a solder point that could cause the Gamecube to not recognize that HDMI mod as a component cable?

[@SamCampbell]

Interesting. A couple of things to check first would be: en.wikipedia.org/wiki/List_of_GameCube_games_with_alternate_display_modes Although you did say that the games were progressive compatible, so that probably doesn't help. Note that PAL doesn't support progressive scan. Natively the GameCube's component cable contained a DAC to convert the signals to the 4:2:2 YCrCb component out, and the analog a/v port would be used for sound, it seems strange that there isn't any prompt as the fact that there is a signal through the HDMI should allow for enabling progressive mode. The best I can suggest is to check pin 1s connection on the GameCube to pin 20 on the Pluto Board. Another thing I can suggest is within the "Other Settings" menu make sure both "Enhanced DVI" and "Allow 480p" are on.

[@kyledavis7481]

Cheers mate! This looks like a promising option.

[@RedFlameFox]

Amazing work, I'd really like to do the same with my Gamecube actually

[@SamCampbell]

Good luck if you decide to do it! Let me know if you have any questions or issues if you give it a shot.

[@zebular]

I think the fix is either going to be it's up to us to reprogram the board when a new version is released or have them ship out a new board.

[@jse07]

Great production value Sam, Nice to see you still making videos :)

[@SamCampbell]

Thanks! Same to you!

[@pugthugdabaccino1462]

I really like your guidance on this you got a good flow as a teach

[@RestorationRelaxation]

After a million and a half problems, I finally have my board installed. Pretty psyched! It looks great. I just got really unlucky with a bad firmware on the first board, then the second board didn't work at all. Managed to mess up two GameCube mainboards because of my inexperience. But the final product is pretty dang cool.

[@tacoconch7678]

How did you figure out there was a problem with the board? Were you able to get a free replacement? I installed mine and can't get a signal. I've rechecked the connections multiple times and everything's correct.

[@RestorationRelaxation]

I don't remember specifically but I know I did some troubleshooting. Do you have the correct capacitor installed? Also what are the lights on the board doing?

[@tacoconch7678]

Patrick Day I used the 100 ohm resistor. There's one red light that stays on and is numbered 29.

[@RestorationRelaxation]

The solid red light is basically an error message, it should be blinking. Are you ABSOLUTELY sure there aren't any shorts anywhere?

[@tacoconch7678]

Patrick Day I didn't notice any shorts. I'll just have to redo it this weekend. Hopefully I didn't ruin any of the boards as it could ultimately be a waste of time.

[@shadowfaxnl]

Hi Sam, i tried the mod awesome video of the soldering! Not really satisfied yet, i think the picture could be better than it is now. Stil bit blurry around edges is this normal? I did see an mod without getting rid of the digital port by soldering the cables onto the pins of the port. Would you advise against this? And last question what wire did you put into the controller pin, i think i burned the board there. Any advise? Again awesome videos really helped a newby at solderding.

[@SamCampbell]

Soldering onto the pins of the port may seem easier, but then you'll need a way to route all of the wires onto the topside of the PCB (If I understand what your saying). Here's an alternative controller point if you need it: i.imgur.com/My2iZAK.png As for any jagged lines you see, that is just simply the sheer limit of the textures in the GameCube! There was only so much it could render. Good luck on the mod!

[@shadowfaxnl]

Thank you for your answer, did not know about the alternative port!:) Do you think this could help for people who like me cannot get it right with the controller port: www.conrad.nl/nl/schnepp-fk-2000-lamellenstekker-stekker-recht-stift-o-2-mm-blauw-1-stuks-731305.html I read about banana plugs, would make life a lot easier:)

[@SamCampbell]

It might, but it may need to be even smaller, like 1mm. Good idea though!

[@shadowfaxnl]

The Alt Controller point worked, thank you! Just added some solder on the point and streched it out upwards. Then put some solder on the wire and soldered it together. Added some hot glue around and Voila! Ill advise anyone who has difficulty with the regular controller port to use it this way. JUST BE SURE YOU DON'T HIT THE BOARD WITH THE IRON.

[@SamCampbell]

Glad to hear it worked

[@c0ntras]

What brand wire did you use? the ones I ordered felt cheap. I completed the soldering. The cube turned on but Hdmi display wasn't working. The cube still boots an plays fine with composite output.

[@SamCampbell]

I used something like: www.amazon.com/Breadboard-B-30-1000-Plated-Copper-Wrapping/dp/B008AGUAII/ref=sr_1_2?s=lamps-light&ie=UTF8&qid=1488762980&sr=1-2&refinements=p_n_feature_two_browse-bin%3A6426179011

[@chu8444]

So with this mod, progressive scan will be automatically disabled? Because when I noticed when you started the GameCube, it didn't ask for you to display 480p.

[@SamCampbell]

I believe it gives the prompt on certain games that support 480p

[@ballisticsavage5092]

This was a great video man. Is there any other really cool mods like this that can improve the gaming experience

[@SamCampbell]

The only other thing I can think of at the moment, which isn't even a mod at all, is the SD Media Launcher.

[@ballisticsavage5092]

True..

[@thejamz19]

Do you think the quality difference is worth the hassle of disassembling the gamecube doing the wiring and soldering then reassembling it?

[@SamCampbell]

Yes, personally

[@thejamz19]

Ok I'm looking for a hdmi mod for my wii but know nothing about modding consoles

[@WaynesWorld999]

Since the Digital port is just a plug soldered to the board, is there a reason that an external unit could not be made? A cable with a Digital Port plug and a 5v power supply and you'd be in business.

[@jtr159]

While we're on the subject, why are there no aftermarket GC component cables in existence? Surely if the official cables go for $200+ someone could copy the pinout and manufacture them in China. Sell for $50, still turn a huge profit.

[@Sebastian-xy3xk]

The problem is that making such a cable would be extremely difficult to make. The Gamecube Component Cables have inside of them a special chip called a DAC or Digital to Analog Converter Chip, this chip is a very Unique one Nintendo made that also has a lock-out function meaning that it has a secutity protection code that prevents 3rd Party Companies from making a Component Cable. When the Gamecube turns on it looks for anything in the Digital AV Port, if it detects any cable it checks the security code inside the Cable. If the code doesn't match or if there is no code, the Gamecube will not enable the Digital AV Port therefore giving no picture. The code is a special secret code that, only Nintendo knows and can control on an unmodified console. I'm not sure how this HDMI mod works, but it should bypass the whole security video lock code and just get into the internal Digital Signals of the Gamecube.

[@deleyandrew]

Helloz World component isn't digital, it is analogue. I have a madcatz cable that works for PS2 GameCube and Xbox and outputs svideo rca and component. All analogue.

[@nerdyneedsalife8315]

Andrew Deley Component as we know it, YPbPr, is analog. However the signal in the Gamecube is digital. The chip in the GC component cable converts the digital signal from the Gamecube into an analog signal.

[@pppgggr]

Is this a PAL-only mod, or will it work with NTSC region Gamecubes? And does it require any other mod-chips to be pre-installed? I'm custom-modding and painting a gamecube for my sister for her 21st birthday and I want to know if it's possible before I begin ordering this stuff.

[@SamCampbell]

The one I used in the video is actually an NTSC GameCube, however it should work for all regions. No other mod-chips are required, just what's in the description. That sounds like a neat gift, good luck!

[@pppgggr]

Alright, awesome. Thank you.

[@SamCampbell]

No problem, let me know if you have any other question later

[@quietgunnerpro1130]

Great video! Really helpful, I'm going to try this within the next month hopefully. I would like to ask you a few questions though. In what order did you solder the other wires not shown? First to the GC mother board then to the HDMI chip or the reverse of that? Did you do one wire at a time or all of them to the board then to the chip? Last did you keep all the wires the same size or just the shortest you could?

[@SamCampbell]

I wired all of them to the board then the chip, soldering one wire to the board checking the length it would require to get to the chip once it was connected. Stripping and tinning that wire, then moving on to the next. Once all of the wires were soldered into the board and measured, I just pushed the tinned ends through the corresponding holes in the chip, and soldered them in. In terms of size I always like to give a little extra for movement.

[@quietgunnerpro1130]

Thanks, that's how I envisioned doing it.

[@SamCampbell]

No problem, good luck! Let me know if you have any issues

[@zebular]

Alright so I actually just bought this and installed it last night. Fired it up and yay! HDMI worked right off... but wait, no audio... I ended up searching through what little info I could find and supposedly I have to enable the DVI audio through the OSD. Yay! again... nope... I made absolutely sure that my controller connection to the via on the bottom of the board was getting continuity to the HDMI kit but to no avail can I get into the on screen display to alter my settings... The input combo to bring it up is supposed to be L+R+X+Y, tried that over and over and over again, nothing. Any help would be great, having to also hook up cables to the multi-out and running those to external speakers for audio isn't ideal at all.

[@SamCampbell]

There are many points around the area where the controller soldering spot is supposed to be. raw.githubusercontent.com/ikorb/gcvideo/master/HDL/gcvideo_dvi/doc/gc-controller.jpg Make sure that it is connected correctly. Way to think of it is one column to the right of C226, and one point down. Than make sure you soldered that wire to pin 94. The sound should work once your able to get to the menus and enable Enhanced DVI Mode.

[@zebular]

I will check again now that I've had some sleep but I'm certain I've checked the location at least 10x. Going to be pissed if it's something to do with my actual controller board not recognizing one of the button inputs.

[@zebular]

Well this is certainly aggravating. Staring at the board pictures and at my own board C226 is printed on the board differently. The cap is in the same spot but the writing is marked off to the side differently, I wonder if I don't have the slightest board revision making this not the correct via to connect to.

[@SamCampbell]

Could you send a picture in of the board? I'm curious what it looks like

[@RestorationRelaxation]

Hey Jake. I'm having the EXACT same issue. I'm pretty confident there isn't a short or anything. After trying to troubleshoot, my port 1 doesn't work at all. I ordered a replacement front board to see if something's going on with the ribbon cable that can explain the controller problem. The controller used to work, just not the input combo for the OSD, now it doesn't work at all while controllers 2, 3, and 4 work fine.

[@jay9058]

I’ve done a few GameCube mods since watching your video. Now I wonder if it’s possible to use a JST connector in order to avoid the solder work

[@SamCampbell]

I have optimized my installs to use a ribbon cable but I I have yet to find a connector that I can easily install on the GameCube motherboard. I would love to find a compatible connector so if you have found one let me know!

[@WellBeSerious12]

There are 5 boards listed. Which ones are required for DOL-001?

[@SamCampbell]

Item#6117

[@audiogear474]

Does this make a big difference visually to just using a gamecube or wii and upscaling 480i through tv (if it supports upscaling) or through a upscaling receiver?

[@SamCampbell]

Yes, it does

[@BlazeFireXERO]

This is a great mod and It's a good bump compared to Composite. But one thing I might suggest is that the Wii's Backwards compatibility is as good as the GameCube when ran through component and the cables for the Wii are cheaper. It's the same great experience and there's no emulation involved. Just something to keep in mind. :)

[@bland9876]

The Wii is not as good as a GameCube because you can't play GBA games on it

[@sos.gamers]

The Wii component cables for gamecube games is a pice of shit! I had the Gamecube with Componente cable on HDTV and is a lot better than the crappy component cable of the wii

[@WaynesWorld999]

Will a Wii Component lead work in a Gamecube? I know it won't fit natively, but will it, if I shave down a corner or 2 of the plug?

[@BlazeFireXERO]

No. As far as I'm aware, the cables for the Wii and Gamecube are dramatically different. Besides, the GC cable requires the Nintendo custom chip in order to decode the signal. Natively the signal is Digital but has to be converted using that nintendo custom chip to analogue.

[@dboymax1]

Where can you find affordable component cables for Gamecube?

[@umfadegams8548]

So sad that i live in Brazil, would be very expensive to send it to you, cause my NGC needs that, since it is the one with the regular analog out. Or doesn't work in those models?

[@SamCampbell]

This only works with DOL-001, or GameCubes that do have a Digital AV out

[@umfadegams8548]

Sam Campbell oh got it... That sucks, there is no way to play the regular analog gamecube, only if you have a CRT TV, with a S-Video cable

[@SamCampbell]

There was a mediocre solution for analog-only GameCubes from BadAssConsoles, but like the N64 HDMI mod, production seems to have died.

[@TSyoyo]

Im debating on trying this.. I have some soldering experience but not much. How difficult would you say this is? Probably tedious Im sure but I can be patient and work through it

[@SamCampbell]

It's very tedious. However I would say it is not too difficult. Just take your time, if things aren't working right take a break from it. It doesn't have to be done in one sitting.

[@TSyoyo]

Sam Campbell what worries me is that little tiny spot with traces all around it.. but what the hell, I think I'll give it shot. Thank you!

[@SamCampbell]

Jacob Scarberry Good luck! Let me know if you have any issues

[@TSyoyo]

@@SamCampbellWell I’m 7 years late to respond to this but, that initial attempt was a disaster lol. You really should not try this unless youve got some decent experience. Its really easy to burn off that pad for the controller input. But, Im so glad that I tried it because it really got me into this hobby and I now do all kinds things like this. I’ve modded a lot of my consoles now and a lot for my friends as well. Thank you for posting this video dude! Cheers ✌🏼

[@BMathiesen]

Gotta love those harbor freight wire srripper!! Hahaha

[@emmettturner9452]

Did you skip the part where you connected the wire for controller polling?

[@JoseGonzalez-rt5fk]

I haven't done any mod before. This looks easy as hell. And if I say it is easy than chances are that it is incredibly easy...

[@Bubsy_Mods]

Great tutorial! Thank you for this 👍

[@starwarsguy1231]

Was the HDMI port already attached to the bord from knjn? Or do you have to order the HDMI port seperately with the pluto bord from them?

[@SamCampbell]

Item#6117 (Pluto-IIx XC3S200 HDMI), pre-programmed with GCVideo from KNJN will have the HDMI port already attached

[@starwarsguy1231]

Sam Campbell thank you for the response! Also i was wondering does this mod work with a 4K TV? Does it pick up the signal no problem that you know of?

[@SamCampbell]

I believe it would work no problem. Feel free to ask any other questions!

[@starwarsguy1231]

Sam Campbell Thanks for the response really apprreciate it!

[@starwarsguy1231]

Sam Campbell i installed the puto board and did the mod. However i am getting no signal on my TV. I checked if i installed a 100 ohm resistor and i did but no signal. The pluto board is also pulsating with a red LED, then stops and then pulsates again and continues like this. Any idea what is the problem?

[@john005_]

@Sam Campbell can the hdmi image be upscale and sharp within reason or will I see a small square on my 1080p 50 inch telly

[@SamCampbell]

Well GameCube games were originally 480p or 480i. This device will upscale to 1080p and more prodomenantly 720p. That being said the vast majority of GameCube games were 4:3, there is simply no way around that fact that games took up a square portion of space on the screen at that time. So yes it will be a nice HD square that fills 70% of your screen. The only option you truly have is to stretch the image in your TVs settings but this will look poor , since the games were not designed for this

[@john005_]

Sam Campbell therefore will i have a band on the left and the right but top and bottom will touch. Or will inhave even less than that. I ought to watch the full video however would you bace a visual example to show?

[@RyuRecharged]

Dude. My lord. This video was great and very helpful but I couldn’t get over the fact that you had the stereotypical 80s nerd lisp. Made me chuckle a bit.

[@SamCampbell]

Glad you enjoyed it

[@aidanstubblebine2197]

i like his music choices

[@oEnder0]

Are there any showing the D101 mod keeping the digital and analog ports in place?

[@landmind666]

does the newer cubes that didn't come with that port still have the points to solider the board into. i know some modding of the case would be needed.

[@SamCampbell]

The new GameCubes (DOL-101) with only one video out port cannot have HDMI output, however they can be modified to support component cables/VGA natively with the analog mod from badassconsoles.com

[@DeathMetalJedi]

Is this mod possible with a gamecube that only had AV out? Does the board still have the solder points?

[@SamCampbell]

No it does not sadly

[@DeathMetalJedi]

@@SamCampbell Man Nintendo can be so frustrating sometimes lol they're lucky their games are good

[@NoahTehArc]

honestly LOVED the intro lol

[@SamCampbell]

Glad you liked it. Personally I think it's the worst intro I've ever done.

[@Xenethra]

I got the 3d printed mount from Colingall, can't wait to do this mod ;D

[@SamCampbell]

Good luck!

[@Triscuit113]

Just finished soldering mine up, and even with DVI mode enabled I'm getting no audio from my tv. Is there something I'm missing?

[@Triscuit113]

Found the problem JUST after I commented. The most miniscule short between 22 and 20 on the underside of the board.

[@tsukimaru131]

your intro gave me a legit panic attack lol

[@DeansterOfficial]

Is it just me, or does the narrator sound as if he was preparing for an ASMR video?

[@josarxevil7281]

I just installed one and I don't get sound without the DVI enhanced feature on. I'm going to rewire it again. Did you encounter any issues with the audio?

[@prodf]

I have the component cables, 480p is so seet on the Cube.

[@RestorationRelaxation]

Jealous!

[@EA40]

Lucky you!

[@rileyk5228]

Fanático ditto. got em for 10 bucks lol

[@udeadinaflash]

I have them too, glad I do. I was still questioning doing this mod to another GameCube and doing a comparison video but idk

[@RedSubaru1]

i know you probbley bought the pre flashed version but can you by any chance show how to flash the fpga because it has been a big question for me

[@SamCampbell]

I couldn't tell you sorry! You'll have to look for another tutorial

[@cerealswimming4309]

is there one of these for the wii? and is there any guides on soldering gamecube parts onto a wii thats missing gc components such as mc and controller ports?

[@SamCampbell]

I believe if you search for Wii HDMI adapters you'll find a few. I don't know of any guides for adding GC components to a Wii, sorry

[@cerealswimming4309]

i found this. but the link is dead hackaday.com/2012/05/24/grab-your-iron-and-add-gamecube-back-to-the-wii/ the link inside there is dead. i only read a few lines from this. i guess this is the guide to add gc components to the black wii. it's a mess so i will look into later. was just hoping there was a version of the hdmi port for wii or that the same is compatible. anyways thanks for this vid. i will try this later. have a good day mate! :)

[@SamCampbell]

00098LL Thanks, and good luck!

[@kyledavis7481]

So this mod is the better choice to achieve 480p quality games for alot cheaper over the component cables?

[@SamCampbell]

Generally, yes.

[@dougjones2296]

softmod a wii u

[@kyledavis7481]

Wii U can't play all models of Gameboy games and the Wavebird controllers are awesome. So.... Gamecube wins with the Gameboy player base.

[@ciggeslifts]

Can this be done if my gamecube i only has the analog av out port? I have a grey one if that matters.

[@SamCampbell]

Currently looking into that at the moment, I'll keep you posted

[@ciggeslifts]

Sam Campbell Thanks, please let me know if you get any news.

[@nerdyneedsalife8315]

This is an old thread but I think the PDF shows how to do it. www.badassconsoles.com/product_images/manuals/GCVideo-InstallationGuide-BadAssConsoles.pdf

[@whiteboyz45]

Alright, I can't be the only one to have thought of this, but when implementing the HDMI mod, wouldn't it be much simpler to create an adapter that connects to the DIGITAL OUT port on the game-cube with HDMI out on the other end?

[@SamCampbell]

No you are not the only one, but this mod was basically an open-source prototype made by Ingo Korb that was designed to be used on a simple FPGA board. It could be done but there are simply no manufacturers for it. Sorry I do recall now, that one site is working on it, but I'm not sure on a release: www.badassconsoles.com/gcvideo-faq/

[@landmind666]

is this only for the cubes with the digital port or can it be done with later models that did not have them

[@SamCampbell]

Only for Cubes with the digital port

[@RestorationRelaxation]

Badass consoles offers an option for the later models. You can restore the digital functionality.

[@Reinfallt]

Is it possible to just make an adapter that you plug into the digital port instead of modding the gamecube? I guess it would need a separate power supply and buttons to control the OSD.

[@SamCampbell]

Yeah, you're pretty much describing what the chip your installing is.

[@SamCampbell]

Actually, I thought about this again, and it would be possible for someone to make a consumer version using a nice boxed enclosure that just plugs into the digital port and only requires like 3 solder points. That would be interesting if someone got on that.

[@Andrey_L.]

Hello Sam! I made this mod, but I dont have sound and controller signal. What can be the reason of this problems?

[@SamCampbell]

Best to double check the controller connection first: kzbin.info/www/bejne/mIvPqp6wnL59iqcm59s

[@nickbrick21]

When everything is together does the HDMI port output audio, or do you still have to use the original RCA cable for sound?

[@SamCampbell]

Nope it outputs audio, just turn on Enhanced DVI mode.

[@nickbrick21]

darn, i thought so, I have the board installed, and its not putting out sound even with enhanced mode on....

[@nickbrick21]

I give up..... It seems as though the sound problem may be from the HDMI connection as it seems to work if the hdmi is torqued to the left really hard..... I guess I'll settle for just using the RCA cable for Audio..... :(

[@SamCampbell]

Ach! That's a real shame, all I can suggest is checking all the connections, perhaps jolting it to the left is bridging a cold solder joint

[@nickbrick21]

Got it working! Opened it up one more time and resoldered some of the joints that looked a little under done..... Thanks for the tutorial and replies! This was my first MOD work of all time and actually my first time really soldering too!!!

[@294ongaurd]

i like how you started the video

[@SamCampbell]

Thanks! I didn't know whether it would be seen as annoying or interesting

[@IronKyo]

you are a godsend for this tutorial. thankyou

[@SamCampbell]

Glad to help! Let me know if you have any questions

[@IronKyo]

Word. The pin numbering on the board with the numbers "1", "2" on the left side and "21", "22" on the right side. What would the pattern be for the numbers 3, 4 and 20, 19? For example, would I assume 3 would be to the right of 1 or 2?

[@SamCampbell]

It's a zig zag like pattern so 1, 2 above 1. One column to the left, 3, 4 above 3. Next column 5, 6 above 5. etc. I'll update the diagram for clarification to others

[@IronKyo]

Hey, I was able to install it. but I have no audio or sound even with Enhanced DVI mode on. What could be the prob?

[@SamCampbell]

I only have two suggestions for this problem, the first one is to double check all the solder joints, make sure none of them are cold, etc. And secondly, there should be a 100Ohm resistor between DDC +5v and VUNREG, check the resistance to make sure that it is in fact a 100Ohm resistor, and if it is then try a direct connection instead

[@paulnolack297]

Will this work with any GameCube, or just ones with the digital out port?

[@SamCampbell]

Only ones with a digital out, DOL-001

[@paulnolack297]

Sam Campbell dang I have a dol-101.

[@bear5016]

@@paulnolack297 DOL 001 are like $25 on eBay.

[@killerkreuz4634]

I’m confused, what’s the benefit to doing this instead of getting a getting a RCA to HDMI adapter?

[@SamCampbell]

The simplest difference is in the signal chain. With the GameCube HDMI mod the signal chain is as follows: GameCube internal digital signal to HDMI digital signal to television. With an RCA adapter the signal chain is: GameCube internal digital signal to analog composite (RCA) signal to digital HDMI signal to television. There is a significant loss of information when moving from the GameCube internal digital signal the analog composite (RCA) signal which makes for poor picture quality. By using an adapter at this stage in the signal chain you are converting a signal with lost information back into a different digital format.

[@killerkreuz4634]

@@SamCampbell Thank you for the informative answer.

[@scythescythe884]

im very new to modding. but damn do i hope to do this to my gamecube one day. my sister's too. she got married and her new TV only has HDMI. i'm already fixing her controllers as a wedding gift, but i hope to do more!

[@SamCampbell]

Sounds like a great idea! I would say that the most challenging part of this mod would be desoldering the digital connector if you are using desoldering wick only. I'm not sure of your experience doing these types of soldering jobs, but if you haven't done much before desoldering pins would be something I would recommend practicing. Also if I had to advertise myself, I can do installs which are linked in the description, but that kind of defeats the fun of it.

[@scythescythe884]

@@SamCampbell thank you. And I appreciate the offer, especially if I cant figure it out!

[@Danbo22987]

Gamecube component cables are identical to N64 which are far more common

[@smackerlacker8708]

You know, I've been aware of this HDMI mod for a while, and suddenly I can't help but wonder... why not a Wii HDMI mod? If ever a console needed HDMI... it was the Wii.

[@RestorationRelaxation]

The Wii's component cables are really cheap. Also you can buy an adapter that plugs into the back of the Wii and outputs HDMI directly for about $15 or so.

[@smackerlacker8708]

Patrick Day Where could I find this adapter? Never mind. I found one. Problem is, it probably outputs the same fuzzy signal that the component cables do. The Wii isn't just technically inferior, it's downright cheap. The onboard DAC is garbage.

[@RestorationRelaxation]

Agreed

[@Xenethra]

KNJN lists a Pluto board for the Wii, although it is sold out.

[@Phi24]

is the background music Lemmino?

[@SamCampbell]

It's in the description, and it doesn't look like it's one of the tracks on the full song

[@smithcommajohn3545]

Hello. I just installed this mod, but I can't get the GC to output to 480p. Games that require 'B' to be pressed do not respond to the command. Games that allow you to choose progressive in the menus have it greyed out. Any thoughts?

[@SamCampbell]

Interesting, I'm not sure what to suggest, sorry. Does your output say 480i, perhaps it's already in 480p (although that seems unlikely)? Of course you can always ask questions on: www.gc-forever.com/forums/index.php

[@SamCampbell]

Actually, one other thing I can suggest is to double check pin 20 on the FPGA to pin 1 on the GC. Also in the menu, I believe there is a enable 480p mode option, if I recall correctly. Hope that helps

[@smithcommajohn3545]

Thanks Sam. A few others said to check the same things. Will let you know for future reference. Thanks !

[@smithcommajohn3545]

seems I lifted a trace when taking off the digital port, so I had to jump it with a bit of wire. working great now. so mad at myself for doing that😒

[@SamCampbell]

Krebstar Ah, done it myself numerous times. De-solder braid can be a bit of a pain to use.

[@frankynakamoto2308]

I wonder if an adapter would work for 1080 or 720p, I mean one that can be place outside just like the one they made for ps2 and the wii.Does this mod allows to play backups?We don't see when you solder the chip, we just see the wire at the end being solder, is that the only one needed to be solder? Is it that simple.

[@SamCampbell]

I've discussed the idea of an adapter with someone else, and it would be a great idea, only power would need to be soldered. The only hold back for an adapter is someone to manufacture the enclosure. This is not a mod chip, it simply upscale the GameCube image. It isn't that simple, the diagram is in the description for all of the soldering points: docs.google.com/document/d/1FOQi2EyKnDFoHLZ-CW4AgzqSwIgCRNXVBuhimMKxcMc/edit#heading=h.k9gib7gumrna

[@frankynakamoto2308]

+Sam Campbell I really like to see how you solder the HD card, because I want to upgrade my GameCube and I don't see how you solder it, I just see when you solder onr cable, but there are other cables. if they could make an adapter like the one for the wii with HD output and an intrrnal chip would be nice, is also cheaper.

[@frankynakamoto2308]

Sam Campbell would an adapter do the same as the mod chip? What about a soft mod in the memory card, can that help improve quality? I would definitely want a memory card modded with the GameBoyPlayer disc information inside, so we wouldn't need the disc in order to play Gameboy games in the GBP. Also they can mod the memory card to allow imports and backups. Maybe even translation.

[@SamCampbell]

***** You'd need something like the WASP Fusion to get SD card support, etc. Then once you added the inclusion of up-scaling, etc, you would be remaking the GameCube looking something like this: s25.postimg.io/ej42qs7ov/Megadrive_v3_And_Wasp_Fusion_1.jpg

[@frankynakamoto2308]

Sam Campbell NICE! I am sure they can make the hdmi adapter in a better shape to easily come to the back. Also would be better with SD card support, we could play the GameBoy SD games through it, many good games on SD. Maybe they can do a mod cover with that integrated and have the sd on front, also the mod cover can have the DVD cover to input and play DVD's would also be another enhancement for rhe GameCube. If they could mod the two memory card ports into a single USB would be awesome. But they would need to integrate 3memory cards inside for the storage of games, I mean if you add 3 memory cards with much memory capacity inside the GC, there would be enough safe space thst wouldn't require any memory card at all, so they could mod it to a USB maybe.

[@EnfenyxGaming]

I was going to do this to my game cube but realized that you just sliced off a piece of purple shell...I'm not doing that to an Team Xecuter IcedCube shell. They need to make a more versatile chip to have the same functions and fit without insane case cutting... (sigh)

[@SamCampbell]

It is a small leg at the back that adds support the the closed lid signal, but this support is reinforced by the Pluto board once it is in place. I understand your concern when it comes to an exclusive case though. I suppose the only option is one of the external adapters on eBay

[@TheRealFobican]

Wouldn't this be easier to just install the hdmi port directly on the spot where the original port sat without the pcb acting as a medium to make it work?

[@SamCampbell]

The original Digital Out port is removed and replaced by the HDMI port. The FPGA board acts to translate the signals. If you meant why doesn't it fit as nicely, it's because it uses an off the shelf PCB unlike many of the other mods which are overpriced and limited in stock because they are custom designed and single handedly made by one guy in say, Texas.

[@TheRealFobican]

@@SamCampbell not that you used a cheap pcb but rather using a pcb having to translate at all that got me wondering why not place the hdmi port directly on the gamecube's motherboard?

[@philthevibe]

Can this be done on a non-USA unit? GC sold outside of the US don't have a digital output!

[@SamCampbell]

This particular method does not work with the Game Cubes that do not have a digital output

[@smart8of8]

What is the name of the website to buy the hdmi mod chip??

[@VinchVolt]

Wouldn't it be easier to make a Digital AV to HDMI adapter? The Digital AV port outputs pure digital video anyway, plus an adapter would be a much safer venture than physically altering the GameCube's motherboard. It's already possible to make Multi AV to RF adapters, heck Nintendo themselves made an official one for the N64 and GameCube, so why shouldn't it be possible to make a Digital AV to HDMI one? Maybe someone could also make an adapter for Wii component cables or regular component cables that connects through the regular Multi AV port, since component video is analog anyways; the only reason nobody's made third-party component cables for the GameCube is because of the digital-to-analog converter chip.

[@SamCampbell]

Yes, but nobody makes one. The whole thing is really a project someone made in their garage

[@VinchVolt]

I'm aware that no adapters exist yet, I'm just wondering why nobody ever seemed to think of making one.

[@SamCampbell]

Yeah it would be really nice if someone came up with one, but I suppose it's a niche market

[@VinchVolt]

Yeah, I guess that's true. Still, modding itself is a pretty niche activity and selling pre-modded consoles does in itself appeal to a narrow audience at best, so I guess there's not too much harm in making an adapter either way. That's just my take on it, though.

[@boriskurt]

Hello i'm working on a project for a wireless hdmi solution and i have a pluto IIx hdmi + 2 hdmi adapter my question is that i want to recover the hdmi signals on the pluto IIx hdmi from an hdmi solution like the Tv so that i can manipulate the datas and i don't know how to start. Please any help would be appreciate. Thanx you and great video !!!

[@SamCampbell]

Are you talking about a product like this: www.amazon.com/gp/product/B0092T3E3A/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=zeos-20&linkId=2df2340de7f04c6c8e7d760e4f464d19

[@boriskurt]

yess but all i want to do is just recover an hdmi signals with the plutot IIx and do some post treatment the wireless transmission part is not my bussiness

[@Ihitjoo]

eaSHHHCHHHGHHHHHHilyy be pulled out wiSSCCTTTCHHHHH juSCHT a light tug

[@Edguy15]

If the game is progressive scan compatible will you get the option popup for it?

[@SamCampbell]

Not always, sometimes you have to hold down B

[@car1it05WAY]

8:21 do you solder only one wire? And what specific wires do you use?

[@SamCampbell]

Take a look at the diagram in the description: docs.google.com/document/d/1FOQi2EyKnDFoHLZ-CW4AgzqSwIgCRNXVBuhimMKxcMc In this situation I ended up using 30 gauge wire, however you can choose a slightly thicker wire if you want

[@car1it05WAY]

+Sam Campbell 8:55 what's that black thing on top of the chip?

[@SamCampbell]

Electrical tape, just for added protection once it's back together

[@car1it05WAY]

+Sam Campbell awesome. Idk if you stated it in the video, but does this mod allow region switching?

[@SamCampbell]

No it doesn't, that would be modchip something like a XenoGC

[@crimsama2451]

i honestly wish this mod was for the Wii instead of the GameCube, or at least there would be a mod for both.

[@RestorationRelaxation]

This mod can technically be done on the wii also but it's not recommended. Also, it's pointless because Wii component cables are dirt cheap or you can get a Wii HDMI adapter for like $15

[@METROIDROCKSXP98]

Patrick Day why is it not recommended ? also, that hdmi adapter converts the signal to native or interlaced 720/1080?

[@SamCampbell]

It's "not recommended" because there are fine solder points to work with.

[@Sebastian-xy3xk]

I consider 480p "high resolution" because most games before the Dreamcast output in 240p

[@SamCampbell]

Yes but you only get it in 480i, and it usually isn't very clean on analog

[@Sebastian-xy3xk]

Sam Campbell All of the 6th Generation consoles could do 480p which is a very clean signal when used properly. 240p gives an emulator sharp look but 480p gives more details on the picture. 480p is more clearer than 480i because it is a progressive image

[@SamCampbell]

Helloz World The GameCube requires a component cable to get to 480p, otherwise you are stuck with the single yellow A/V cable

[@Sebastian-xy3xk]

Sam Campbell I have the Gamecube Component cables and with this mod you can enable 480p on 480p games such as Super Mario Sunshine by holding B as the game boots up. You can also force 480p on 480i games by using a homebrew software called Swiss, it can be launched using Datel's SD Media Launcher which can be bought on Codejunkies.com. Try it, the HDMI mod can do 480p just like the Component Cables can! Just remember to hold the B button before the Gamecube is on and don't let go until a message on-screen says before the game starts "Would you like to enable Progressive Scan?" then select Yes to get 480p :D Lots of games support a 480p mode and if they don't they can be forced. Swiss also can do Widescreen too on 4:3 games!! The forcing of anything by Swiss will not work on every game but it will on most :3

[@SamCampbell]

Helloz World Thanks! But I know this already. I just wanted to tell you that the 480p will only work with a component cable or this mod, in case you had assumed that the default cable supported a digital signal for some reason.

[@Pjk110]

Is the image quality as good as the component cables? I have them but would sell them and switch to this if it's as good lol

[@SamCampbell]

It's as good, yes.

[@feonjun]

I like the mellow background music. Who's the artist?

[@SamCampbell]

I believe there is more than one artist involved. The track is available in the description. Which one it is specifically, I cannot remember exactly sorry.

[@feonjun]

OMG. I really thought I clicked on "Show More" Thank You!!!

[@TheTanglyHen1026]

Three things to say/ask 1. is there input lag with this? 2. Can i also use composite without unpluggin hdmi constantly so i can competitively play melee on a crt

[@TheTanglyHen1026]

2 things not 3 sorry

[@SamCampbell]

It seems to project both outputs at the same time. I had both HDMI and Composite plugged in, and switching between inputs on the TV showed they were both operating. In terms of lag, I couldn't answer your question, sorry.

[@TheTanglyHen1026]

+Sam Campbell ok thank you

[@rafaelvarela7922]

Sam Campbell

[@ApemanMonkey]

Why didn't you press B during startup to select progressive scan mode?

[@SamCampbell]

Honestly forgot in the anticipation of the moment. I'll update the guide document to remind people.

[@ApemanMonkey]

Does it make a difference in picture quality to select progressive scan mode, when this mod is installed? Or does the mod do excellent de-interlacing on its own?

[@SamCampbell]

It does make the picture quality a bit clearer, you'll also notice that there isn't any flickering on objects like text

[@MrFireBracker]

now I've watched a lot of videos on this , but I'm curious can u mod this on a analog only gamecube ??

[@SamCampbell]

I've heard things about this chip: www.badassconsoles.com/gcvideo-1/

[@GonTQM]

Hi! This looks awesome! do you know if it works great in PAL region?

[@SamCampbell]

It should work for all regions, just make sure that your GameCube has the digital output port

[@GonTQM]

Perfect! Thank you! i'm definitely going to do it! one more question? the one port that you wire on top is the especial one on the list? why do you put a resistor on it? and what's it value?

[@SamCampbell]

Achinebe Ah yes, I just gave a brief idea of the mod in the video all of the detailed instructions are in the description. Bridging the pins on the top with a 100 ohm resistor is for compatibility for various TVs.

[@kyledavis7481]

Also does this mod work for PAL Gamecubes, like the AUS or EUR versions?

[@SamCampbell]

Yes it should

[@kyledavis7481]

Sam Campbell , Exactly what would I need to purchase from this website for this HDMI mod? Just the item #6117?... For the pre-programmed chip..... Or would I need other pieces? And if so which ones precisely?

[@SamCampbell]

Kyle Davis Yes, you only need the pre-programmed one for the GameCube, and then some wire, and a 100Ohm resistor

[@kyledavis7481]

Sam Campbell Thanks again. 😄

[@SamCampbell]

No problem

[@s1jer2]

I have the same monitor how do you make the speakers work on yours

[@SamCampbell]

I just held a headphone up to the mic, there are no speakers

[@Brandon78B]

Why does your board have that white connector at the side?

[@SamCampbell]

It was one of the earlier versions of the flashing process, when they kept the pins in, but now they use them anymore (from what I've seen). It shouldn't make a difference

[@robertoperezjr.1119]

Could this hdmi mod be done if the Gamecube doesn't have the digital av out?

[@SamCampbell]

In reality, no. However there was supposed to be a development for the analog GameCubes over at: www.badassconsoles.com/gcvideo-1/ However, all production and stock has come to a halt for the foreseeable future.

[@harrisontashjian752]

Is it possible to do this in a way that keeps the digital port working with the same mod chip

[@VihenpoBob]

technically yes because the points you solder on are the ones of the port, practically no because you'll need a male connector and the wiring will be quite awfull.

[@Axl_jeryko]

its woks with 480p (progressive scan) ? really looks good this mod

[@SamCampbell]

Yep it does

[@Axl_jeryko]

+Sam Campbell thanks bro nice video, this is the best way actually to get 480p, i guess and acce$ible price

[@pepijn_m]

why is there not just a plug in one for hdmi? if you desolder and solder something elkse on wouldnt that be easyer

[@SamCampbell]

The only problem with making an external adapter is power would still need to be soldered, but yes that would be a good idea, unfortunately nobody manufactures this board in an easy GameCube adapter enclosure. It was more of a DIY project that someone made for a Pluto board

[@brianwalker7771]

I see several boards in the link. witch did you use?

[@SamCampbell]

Item#6117 (Pluto-IIx XC3S200 HDMI) (pre-programmed with GCVideo for Gamecube), not to be insulting but it is posted under the link to buy

[@brianwalker7771]

Thanks for the response .Sorry I completely missed that the item number was listed.

[@pointnet281]

hi Sam. I did the mod. I have an issue... I don't have any sound through hdmi. I check mute setting is off. any idea ?

[@SamCampbell]

By "checked that the mute setting is off" do you mean you checked that "Enhanced DVI" is on?

[@pointnet281]

Many thanks ! Next time I'll watch your videos till the end :p

[@SamCampbell]

Point Net Good to hear it works!

[@zacotb]

I play my GC games on the Wii using a Wii HDMI adapter. Looks good enough for me.

[@tomasdelizia3695]

Yes it does, but obviously most people who do this use the Game Boy Player.

[@c0ntras]

What iron did you use @sam campbell

[@SamCampbell]

It's rather affordable: www.amazon.com/gp/product/B01J5KC93Q/ref=s9_acsd_hps_bw_c_x_3_w

[@c0ntras]

Sam Campbell Thanks, can you add a link to a tip set for it? I'm having trouble finding he right ones.

[@SamCampbell]

Connor Jeney I'm not particularly sure about that specific link, but mine came with alternate tips

[@c0ntras]

I purchased that iron. It wont get hot enough to melt the factory solder off.

[@SamCampbell]

Interesting, try adding solder to the points, then removing them. Often times ground pins can be a pain