How to Fix Trigger & Bumper Buttons on Xbox Controller | LT RT RB LB Shoulder Sticking Stuck Repair

If you have a modern Xbox controller (Xbox One, Series X or S) you may be experiencing issues with the LT, RT, RB, and LB buttons, such as not registering a press, stuck in down position (jammed), stuck in up position, one button activates the other, too easily activates, activates on it’s own, loose button, makes a noise, limited bounce, goes to 100% to easily, never reaches 100%. This tutorial goes through a 8 methods to try in order to fix it, which range from cleaning, to inspecting the magnets inside.
How to test an Xbox Controller for Issues:
• How to Test an Xbox Co...
How to Remove the Xbox Series X Ring Stand Base:
• How to Remove the Xbox...
How to Set Up "Break Reminders" on Xbox One, Series X/S:
• How to Set Up "Break R...
How to Save Battery on an Xbox Controller:
• How to Save Battery Du...
How to Fix Analog Drift on XBOX Series X/S Controller:
• How to Fix Analog Drif...
..............................................................................................
Patreon:
/ kevinsthreechannels
Product Links:
Replacement Trigger: amzn.to/3jWukyv
Replacement Bumper: amzn.to/3DHfBOl
Precision Screwdriver Set: amzn.to/3k5Do49
LB and RB Button Replacement Kit: amzn.to/3ZY8me9
Xbox One Replacement Part Kit: amzn.to/446wBsq
Electric Duster: amzn.to/3lwoRyR
Replacement Battery Covers: amzn.to/3XBUYKS
Xbox Core Wireless Controller - Robot White: amzn.to/3xok5Gr
Xbox Elite Wireless Controller Series 2 White: amzn.to/3lqms8P
Rechargeable Battery Pack: amzn.to/3E7RSrh
Kinivo HDMI Switch: amzn.to/3GhtVhn
All Amazon links above are affiliate links. I get a small amount of money if you end up using them to make purchase (it does not have to be for the item I link to, as long as you click my link then move to another item, it works)
..............................................................................................
#xbox #xboxseriesx

[@HowToX]

Here are some product links relevant to the video: Replacement Trigger: amzn.to/3jWukyv Replacement Bumper: amzn.to/3DHfBOl Precision Screwdriver Set: amzn.to/3k5Do49 LB and RB Button Replacement Kit: amzn.to/3ZY8me9 Electric Duster: amzn.to/3lwoRyR Replacement Battery Covers: amzn.to/3XBUYKS Rechargeable Battery Pack: amzn.to/3E7RSrh Xbox Core Wireless Controller - Robot White: amzn.to/3xok5Gr Kinivo HDMI Switch: amzn.to/3GhtVhn *All Amazon links above are affiliate links. I get a small amount of money if you end up using them to make purchase (it does not have to be for the item I link to, as long as you click my link then move to another item, it works)

[@Junior-yv3du]

W

[@RadiantSword2K]

Absolutely bogus and ridiculous. They don't work for me.

[@BradyT918]

A detailed and handy guide. Was able to get all 3 covers off and count figure out how to get better access to the bumper. Your video helped with that. The issue I had was the RB rubbing against the RT. When the trigger was even slightly pressed, the RB would pop put and work fine. Ended up sticking a very tiny piece of tape between the two to reduce friction, and it worked.

[@ghost_to_a_ghost]

fixed my RT! i had to take it apart but only the first pannel you removed. some sticky black stuff was all over wherw the trigger makes contact when pressed. cleaned it up with alcohol! it works!! this was a brand new out of the box controller so THANK YOU SO MUCH! i will recommend this vid to others, too! thank youuu!!!!

[@meat_sweats3017]

It worked! I tried a lot of tutorials, but this one has to be the best one to finally break my controller

[@Boognish_]

Lol

[@HowToX]

Glad it worked!

[@fredoran]

@@HowToXthink you might need to re read that

[@TheRhinoGoss]

Same 2 broken controllers now!🙂

[@mattswailes5456]

😂

[@xProErax]

7:03 Easily this segment was such a big help! My right trigger had it to where it pressed but it felt different/broken. Found out that the foam pad was misaligned, not even missing, and was able to fix it! Thanks again man!

[@moukhu]

same here just cleaned and re put it

[@yeetnuke696]

my left trigger isn’t stuck, but no matter what i do it is always pressed down and activating without me even touching it

[@HowToX]

Ok, do the things in the video if you haven't already.

[@justicecordeiro7565]

Same here buddy waste money on a new controller just for it to glitch on me

[@toastyboy1295]

@@justicecordeiro7565 take it apart look for broken/stuck pieces

[@thekingofthepatriots9-498]

@@HowToX Hi my friend do my name is Yamil, I got a drifting problem on my controller and I want to know if you can fix it for me.

[@anthonymedvescek7066]

Well for me I found out the part of the bumper there a kinda plastic piece that pokes the number activated and that broke off

[@coaks336]

Thanks! My left bumper stopped working. I got down to the last step, it was surprisingly easy with your instructions. Turns out the plastic tip that connects the bumper to the white circular little post was loose, it snapped off when touched. Ordered a new part for $10 for 1 day shipping with Amazon and fixed it in 5 minutes. Much appreciated!

[@cosmicdive]

I had the same situation but when I replaced the piece the controller didn't turn on anymore. I'm not sure why but it sucks tbh

[@nicholasmatera4446]

Thank you! I clicked on three guides before I found yours, by far the most helpful and professional

[@TheAxeFace]

Don't normally like videos but, because of how descriptive and helpful you were within the tutorial it was well deserved. Even tips about how to learn from tutorials, like watching the full segment before trying to do it along with you. Edit: Wow, thank's. Just saved me £50 buying a new one, my LB button wasn't working, turned out the little plastic sharp bit that presses the button snapped off, I found it and superglued it back on and it works a charm. Thanks so much mate!

[@Kimmerdinger]

Same here!! Had to look at a couple controllers over the last few months and just to be safe, I always come back to watch this video. It's just too easy to be safe - so why not do it :D Cheers~

[@ssynteria]

My series s controller kept pressing both the triggers on its own. So I did the first method, updated my controller, and the issue stopped! I thank you from the bottom of my heart, because I have been dealing with this issue for about a year and a half. Really man, I appreciate the help!

[@HowToX]

Cool. Glad you can still use the controller.

[@saltuponwound4369]

Thank you. Trigger has been sticking forever. I found that a thin piece of plastic like a thin zip tie works well in place of cardboard.

[@Mqrshm3lll0s12]

Very helpful. As a 15 year old home alone during the day I needed to replace my bumpers. Took them off a spar controller and slapped them on mine and it works like a charm!

[@SekhmetScion]

Thanks for this. My LB stopped working and I had no idea why. Bought a T8 security screwdriver & disassembled the controller thanks to your instructions. Finally saw what was wrong after 15mins. The plastic protrusion on the casing broke off, so that's why the LB button wouldn't click.

[@ayzee5169]

Did you figure out how to fix it? I'm waiting for my torx screwdrivers to arrive so haven't actually disassembled the controller yet but I bet my life this is gonna be exactly the issue

[@SekhmetScion]

@@ayzee5169Yeah, I just replaced the bumpers. It's one single piece of the case. Just have to make sure you order the correct one. You can tell by how it's split from the plastic piece in the middle (over the sync button). One has a diagonal separation, the other is straight. It's important because the protrustion that goes inside to click the bumpers is different (one style is much thinner than the other).

[@ravenbloodommo]

My lb clicks but don't work I'm not sure if a button inside slipped from the lb or if it blew out. All other buttons work perfect.

[@blxckoutzzz]

That's my problem (I think, not quite sure what u mean). But when I press it, it doesn't feel like the other bumber. It's like loose ig. I have to like hit it on my desk once or twice to get it too work. Then it'll stop working again.

[@ywpini_106]

@@blxckoutzzzsame

[@kolin3924]

Thanks a lot! Using this tutorial i found out whats wrong with my RB, it was broken little plastic stick inside which is pressing the switch, i didn't know how to look inside, now i just bought the part and gonna replace the old, really aprecciate it

[@Moi________]

What method have you try ?

[@RKDriver]

These have a major design flaw by MS. They're way too weak for the heavy use they get like the constant parrying in an RPG game.

[@Blunterayo]

i started this video with a rb button not working no matter how much or hard i presses it. exactly at 1:51 my problem was solved by using a card under the rb and above the rt instantly saw the rb responding on my xbox. thank you, u saved my 20$ controller :)

[@babdreemer]

Hey I just opened up my controller, and the button my right trigger is meant to press only randomly works, and only when I manually press it with a tool I have… any idea on how to make it reliably work?(also you never explained how to remove the trigger button)

[@bawta]

Holy shit and here I was, sad that my limited edition CP2077 controller was going to have to be retired and I was saved by a simple piece of cardboard. You've just saved me £100 and kept my baby running.

[@ghostkiller7945]

Bro this video was a god send. Both of my triggers were stuck almost like they had been jammed from being dropped. I don't know how but the cardboard trick fixed it immediately! Thank you for making this video!

[@KJDekka]

Awh man thanks!! Fixed my left trigger because of you. I was so confused because I cleaned it all up. Turns out that I had put the magnet in the wrong way and didn’t know that the side with the dimple should face down. Was about to waste $60 on a new controller, you’re a lifesaver!

[@MADFUN1979]

Holy crap! The first one seriously worked in thirty seconds total and it’s been sticking since ‘Nam!!! Thank you!!!!

[@ooollhkgo]

THANK YOU SO MUCH! This tutorial really helped me with my controller since my right bumper barely works and this video saved me from losing all my ranked games! God bless you 🙌

[@DevonLucas-nr8tn]

My left bumper wasn't working tried to clean it first but eventually had to take apart the controller and put in a piece of electrical tape. Amazing recovery of the button and truly works thanks.

[@BigRayHernandez]

So I was able to pull off the panel with my hand. And there was sticky gunk in there. Took a little alcohol swab with a toothpick and my controller is as good as new! Thank you so much.

[@Monkkie]

This video managed to help me fix everything wrong with my controller both of my sticks were drifting and my RB was clicking itself I don’t have drift and my bumper is no longer clicking itself I genuinely have no clue what I did most helpful on the Internet take my sub

[@beartackle]

I totally forgot the outer plastic on the handles could pop off. I got to clean my triggers and now they don't stick. Thanks for the video!

[@George_Washington420]

Cant lie bro your first suggestion with the cardboard actually just caused my bumper to stop working entirely rather then it only working sometimes like it did before

[@extyr]

I found my solution at step 7. A piece of the long frame was broken, so I glued it back together. Now, I only need to fix the drifting. Wish me luck!

[@Jesuslover2441]

If you have a extra controller then you can take it apart and salvage the joy sticks and stop stick drift but of you don't try to take it apart and take teh front shell of and then use a straw and blow into it then pop them off and see of any dust or gunk is on there causing drift hope this helps

[@blackkitsu6873]

I thought my controller was gonna have a some internal problem that would be a hassle to fix. But method 1 did the trick in a couple seconds. Thank you!

[@lukebrown9837]

Thanks for showing us this, my right trigger was sticking every time it was pressed, the problem appeared to be a loose cushion for the trigger and with this being loose it’s left a residue of adhesive hence the sticking.. I’ve cleaned this off and applied a new cushion (tiny piece of sponge 🧽) with😅.. work perfectly 🎉… thanks for this video much appreciated 😁👍

[@kylemorgan7961]

Thanks! That's what wrong with mine. I'll have to get some new sponges.

[@lukebrown9837]

@@kylemorgan7961 to this day I’m still having issues with this design it’s shocking, the trigger works fine still so I’d recommend a little piece of sponge 🧽 tiny tiny 🤣

[@GodzillaJake19]

My right trigger was sticking really bad and the card board and compressed air method worked. Thanks you just saved me 60 bucks!

[@matieyes7695]

Thanks! I couldn't open the controller since i didn't have the screwdriver set for step 5, so i just pulled some tape and put it under the trigger and voila it's fixed.

[@tipsy76]

I used a cork board push pin to poke into the trigger pin, to release the trigger and spring assembly. Not as tricky as it looks really. Great video and helped out a lot, thanks

[@NotMyNameYT]

I was honestly just gonna watch this to know how to take out the triggers but now I'm gonna try this out

[@exsavior9364]

I've been watching your gaming channel for some time. I needed to look up a vid for LB/RB button replacements and this video came up and I recognized your voice lol.

[@juliandierker4909]

Thanks for those fixes. The first simple Fix worked already for me since "LB BUTTON" was always Pressed at my controller.

[@jaredoconnell5107]

Thank you!!! I opened up my controller to find the tooth extending down from the right bumper, that pushes on the internal white button, the tooth had snapped off. So I ordered a new bumper set for $10 and replaced it and… voila! Saved myself $50! Many thanks!

[@kiwis6823]

THANK YOU SO MUCH. MY R1 HAS BEEN BROKEN FOR 3 DAY. Finally I can play rainbow six seige

[@ProsperousThoughts]

Omg thank you 🙏🏾 the first method actually worked! I poured a couple drops of alcohol on the button and smacked it around a bit prior to the cardboard method but it worked thanks again

[@animewatcher9983]

Literally the first method fixed the problem. Thanks

[@vegan4theanimals]

1st method worked for my bumper and the 2nd method worked for my A button. Greatly appreciated!

[@minedude33]

Please don't forcefully remove the grips. If you pry too hard like he has in the video, the small sharp pieces that click into the slots that keeps the grips on the controller will snap. It's best to use a flat object to run along the seams of the grips until slowly but surely it releases its hold. (Very obviously, I have learned that the small sharp pieces will snap under immense pressure the hard way, I ruined many a great grip that way)

[@HowToX]

I'm always open to new ways of doing things, but I've never been able to loosen the sides enough to make it come off. Like I mentioned in the video, I've damaged my prying tools trying to do that. My grips are always on there very tight, and brute force is need to separate the pieces. It could be that other models have looser grips.

[@minedude33]

@@HowToX I've noticed that branded controllers (Like the Gears of War, Halo, and other branded controllers) have easier to pry grips with no strong stickage, and the newer controller grips are just glued on with God's most powerful adhesive

[@SpartanGSD]

I've always just pulled them off by pressing the trigger down and reaching beneath...never had an issue, done it many times

[@Mkplayeruknow]

Is it okay to use the cardboard without alchohol?

[@TinManSimRacing]

Wanted to say thank you. The cardboard trick fixed my $250.00 Xbox controller. Thought man I haven’t barely used it as I play on a full sim. I only play race games or sim race games.

[@ShawnVFC]

BRO I WAS SO WORRIED THINKING I WOULD HAVE TO GET A NEW CONTROLLER BUT U JUST SAVED ME HECKA! I ONLY NEED THE FIRST STEP TOOO

[@PeterKNoone]

Super helpful. Thank you! I had to remove that sticky pad at the end of the right trigger's travel. It was all gummy and not letting the trigger release which is really bad for throttle control in racing games.

[@CrashInterview]

Parents: Buys me Xbox for birthday with their hard-earned savings Also me 5 mins later for no reason:

[@TaylorDaleWright]

I was able to fix my issue with the first few tips, thanks! I used a cereal box to make a pick, and compressed air to help clean things out, then a firmware update for good measure. You did a great job walking through the process and explaining the risks and reasons for taking each step.

[@pbizzy333]

how i’m using a cereal box too

[@Ethelady]

My bumber panel was broken!! :D Instead of buying a new controller I can just buy a replacement! Awesome, thanks for the video and links!

[@OliverOnNOS]

Thank you for that! My rt button was stuck so I did the cardboard meathod.

[@ayemercury9865]

Thank you so much! Usually videos like this suck bung hole cuz they rarely fix my specific issues, but this video helped me fix my RB button with the cardboard method and I guess there was just debris in my controller

[@StriderBaron]

I just wanted to say that you rock, dude! Your video helped me a lot! I had dust built up and had to clean around the buttons like your vid suggested. Happy New Year and keep on rockin' dude!

[@Majima669]

Definitely the best how to guide for the trigger and stick drift thx.

[@RedHaloManiac95]

Cleaning the LB and RB buttons with some isopropyl alcohol and rapidly tapping it fixed mine. It’s a MASSIVE difference how sensitive they are now. They hadn’t worked well in a year on my elite series 2, I thought I’d have to send it in. Try this it works great! Just get the highest isopropyl alcohol % you can get 70% minimum (just be sure to allow a few minutes to dry up after). Get a Qtip or paper towel and get it damp with isopropyl just so you can get a little drop onto the button and then with a little screwdriver tap the button rapidly. Do it like 3x. For a bonus add a little piece of index card as a shim in front of the button. Don’t use anything thicker and don’t use anything spongier, you won’t have a satisfying click.

[@officialezetaperz]

My bumper broke because the tab broke off, do you have any way to fix it?

[@HowToX]

Replace it. See links in the description.

[@blacktarmac]

Wow, thank you so much! The first method already fixed my stuck bumper - this is so great! I was ready to buy a new controller!

[@DavidRonnemo]

Great video. My controller had a broken LB and was fixed with a drop of super glue.

[@HowToX]

Cool

[@arctr00perecho]

yea same here. was it the skinny prong that pushes up and actuated the button that broke for you? my controller accidentally got bumped off my desk and landed on hardwood floor about a week or so ago. the bump that bumped the bumper was too much to handle apparently xD. seems like it was a small crack that got bigger as I used it more. i play rocket league and use LB as drift and air roll, so not having a functioning button confused the heck out of me at first. thought i was having an issue mentally lol. its 2 am rn so pretty tired haha

[@sxnity-2747]

Which step is it? Cuz my lb doesn’t work and in forza that’s my e brake fortnite that’s my aim button cone button and reset button

[@sxnity-2747]

And I play flipped in every shooting game so I can’t aim

[@raza4665]

Thanks dude , the first method worked for me . Now my controller works like new

[@codymorrison71125]

Yanno I watched this video, beat the controller off the side of my desk and it worked. THANKS

[@Bibbity-bot]

I thought it didn’t work so I picked up my controller and checked and the way my face lit up seeing that it worked 🤣🤣

[@AmandaSolis111]

I tried everything but it is not working 😢 do you have other options without taking apart the Xbox 1 s controller

[@goldenpony822]

oh man what a relief, i was barely getting into minute 2 and suddenly it was already fixed before we even moved on... ohhhh!!!

[@samueldoeswhatever7307]

thank you! the first method was an easy solution. the LB button was being too sensitive, but I guess some dirt was just keeping it too held down.

[@DomMaalouf]

THANK YOU... for me... This also works for Stick Drift.... I blew into the cracks on the joysticks.

[@NussuLus]

Thank you man I was losing all hope but I took a Pokémon card, scraped around Lb then pressed the button for like a minute and it started registering

[@onx_life2181]

You actually helped me fix my right bumber,appreciate it gang🙏🏽

[@MistahJayPlays]

Thank you! I just fixed my controller. I needed this guide for dismantling the joystick. Thanks!

[@sebastiancontreras5132]

Bro your 1st method messed up my wired controller and no the button is broken and won’t work thanks a lot!!❤

[@leechocho111]

Just wanted to show appreciation, I tried the straw method it worked first time thanks mate

[@SixoTyson]

I fixed my old xbox one controller and now I can finally derank in rocket league thanks dude !!!!

[@Hayden69042o]

This happens to all my controllers this was my last one my heart dropped so thank you

[@4Honor4Whatever]

First trick worked. 34 years of being a gamer and I’ve never done this before lol

[@rubyrose8569]

Thankyou! Just replaced my hubbys bumper & trigger buttons with your help! Hi-five!

[@johnnasr7721]

dude many thanks i smash it and got a brand new controller ❤️

[@bussymoose]

Was super confused my RB was only working half the time And was making a very sifferent sound then the other, somehow fixed it after dismantling and blowing into it. not clickbait and very helpfull thankyou!!

[@brandoniixx]

This is one of the best demonstration videos ive ever seen Infact maybe the best. Hope ur keeping it up dude

[@Farisking700]

FR MAN U SAVED ME IM PLAYING COD AND MY RB ISNT WORKING I BLOWED IN IT AND IT WORKED THX

[@pilot_doggo]

Thanks for the video, I got it taken apart and put back together but my issue was not fixed (the bumpers are broken) so I promptly put the controller through the wall, but this video was a great help so thank you for that.

[@danielaguiar9173]

Best tutorial, the first one solved my problem in seconds after I tried for half an hour and having an issue before and solving it in an hour... Life saver!

[@HowToX]

Glad it helped!

[@risingphoenixalichiaburns6942]

​@@HowToXme too it meant a lot to fix it I was bawling my eyes out and hubby was frustrated and had gone to bed just overwhelmed I can tell by how quiet he was that it was bugging him but he didn't want me to feel bad after he laid down I bawled my eyes out thinking how can I get this thing fixed because it is my son's only form of entertainment as well we live in an area where there's not much to do even if you were to go outside the first thing you mentioned worked perfectly and I was finally able to have tears of happiness that it was fixed and my hubby feels a great sigh of relief at least now when we go to sleep even though it's early in the morning we kind of pulled an all-nighter we can feel good about everything knowing that it works sorry for such a long message I'm just really thankful I mean very very thankful😢😅

[@easysomeone]

Even tho I havent tried yet Im very grateful you have shown so many alternatives

[@spilov_]

The left trigger is fine when there's no batteries but when i put batteries in it makes the left trigger not move as much or like it kinda makes a scrape and squeaky sound when i press the left trigger and i dont know what to do. Id be grateful if you can help me out

[@niloymondal]

Do I need to unscrew the back screws to remove the front shell or can I just pull it off?

[@benlevy2806]

The carton method worked like magic. So simple yet effective! Thx!!

[@ScorpiusXVI]

Updated my controller and it started working. Thank you!

[@FlyingCat-ms3fo]

Worked great, ripped off the grip, shoved a Q-Tip with 91% alcohol (ISP) and cleaned the circuit board and the trigger tip, and the sticky trigger stopped entirely.

[@nickaoke]

Dude, I've been playing GTA 5 with an Xbox S/X controller recently. One issue that I'm having is, when I'm accelerating a vehicle, my RT button needs to be at least 50% pressed in order for the vehicle to start moving forward. That's a bummer if you want to roleplay and and drive around smoothly. Same things happens when pressing LT for breaking. Do you know how to fix this issue, by any chance? Thanks!

[@HowToX]

Do the things in the video.

[@vovazagach1781]

Hi, what you are dealing with is called dead zone, I have a similar problem with right trigger, 3 mm. dead zone at the end just from the box. I tried updating firmware and now it's 2mm. Have you found a better fix?

[@kat9847]

Hi what if the little metal bits when you put your battery into, the pressure from that is causing my left trigger to be stuck, how do I fix that

[@VortexORPD]

Thank You, this help out with the RB on my xbox elite controller and it works juts like normal now. Appreciate it ❤

[@Ragenarok]

The padding that the trigger strikes is compresses quite a but when the trigger strikes it and that's causing the trigger to feel "sticky" what would you recommend for that? I don't play rough and it hasn't been dropped much, but my floor is this thin line of felt that feels like bare concrete to walk on, and for any dropped item

[@FenixOO7]

Hey. First I checked in settings - accessories and it showed that the left trigger was pressed all the time. This makes it impossible to operate the console menu. I removed left panel. I cleaned the left trigger as shown in the video. It worked. Everything was fine. 20 minutes passed. The faulty LT trigger came back. Two weeks passed. I clean with an ear stick soaked in alcohol. I put it in through the gap and cleaned the left trigger. After a while I check. It works. I turned on one game as a test. Again it took about 20 minutes the fault returned. What should I do? Since the button worked it is not defective. Something is not connecting inside

[@colorwood1041]

My LB isn’t stuck it just won’t activate. My RB makes a clicking noise when pressed down but my LB doesnt and doesn’t even react when I press it down

[@icicestparis]

just repeared a remot thanks to your video, i was gonna threw it away, big big thank you, you made my day. Now lets play again ;)

[@Moonlightz1]

Can you make a tutorial on how to fix a loose RT on the Xbox one😅

[@tristenludewick3030]

method one worked, thanks for saving me the time, the service tech in me just wanted to start tearing the controller apart

[@danom3572]

Query, I bought a new Xbox one controller, the left bumper never worked, pressed down, never clicks but also does not work or causes an action. (The return process was such a nightmare, bought a store warranty told to go to Microsoft, they stopped human customer service yadda yadda life, it's been years, but it's still new, with my new work I have a bit more time.) So before I tear everything apart, do you have any suggestions? PS. It DOES work but only if I push down hard as it's already stuck down I'm not sure how that works.

[@FATBOIINC]

My LB trigger is stuck down it just did this today and won’t come back up any tips besides opening the remote ????

[@El.IzMeOk]

I tried all the method it dint work, but when i slam it to the ground suddenly it started working

[@lilZap2600prodz]

I did that and it worked 😂

[@Jkd-yeep]

Why did this work

[@Micah_Rat69]

How hard

[@auxxard3088]

@@Jkd-yeepdidn’t work my controller fell apart. F you guys dude.

[@FlippyonYT-l9d]

TY BRO

[@cineczek89]

The right RT trigger doesn't go any lower than the LT one. Is that a good thing or is it damaged? series elite 2

[@lukeavery3072]

I finally managed to remove the piece that was jammed in my LT button. Thank you.

[@feycee]

leaving out one thing actually. My right triggers used to jam in a bit after pressing fully. The trigger acually stucks against the backbody of the controller, looking like the trigger (or the machnism) deformed since it gets not just a down push, but a sideways push as well obviously. The wear is even noticable on the trigger's inner side. Any suggestions? I am even thinking of cutting out the the part og the housing where the trigger leans at...