Garage door remote issues

[@NYChemicalRomance]

Thanks for that. It was the double-click thing that I was missing to get things working.

[@Craig-MItchell]

Glad it helped 🙂

[@user-ki4qm4lx4k]

Thank you for your video it save me a fortune well explained

[@Craig-MItchell]

No bother, glad you got sorted out, I make lots of interesting and helpful videos 😉 Subscribe to be notified 🙏🏻

[@prw9]

Excellent video - really helpful, thank you 😊👍

[@Craig-MItchell]

Glad it helped 🙂 Good luck 🍀

[@Fabs-10]

Saved my Sunday 😊

[@Craig-MItchell]

Glad it helped, subscribe to help me along 😉

[@techtonicsystems]

Great video. Many thanks

[@Craig-MItchell]

You’re welcome Good luck 🍀

[@JockeyCake]

nice experience, thank you

[@Craig-MItchell]

You're welcome, glad it helped. Do like and subscribe 🙏🏻 Good luck 🍀

[@tdm7783]

Thanks

[@stephenwilliams7056]

Cheers for the video, just bought a new house and remote has gone dodgy hope this well help.

[@Craig-MItchell]

You're welcome Stephen Good luck 🍀in your new home 😉

[@stephenwilliams7056]

@Craig Mitchell thank you very much. I happened to pass a timpsoms shop today who offered to replace the battery, the older type one got it working but still 1 button playing up so replaced the button for me all in all a tenner and it works great so happy day's.

[@Craig-MItchell]

@@stephenwilliams7056 Fabulous, glad you got sorted, makes such a difference when stuff just like works 😉

[@stephenwilliams7056]

@@Craig-MItchell your video helped no end thanks again.

[@Craig-MItchell]

@@stephenwilliams7056 Subscribe, I'm full of useful information when it comes to things that need sorting 😉

[@gavinho3316]

I had to solder a new micro switch onto my fobs

[@Craig-MItchell]

Mine seem to be fine with a spray of electrical cleaner every now and then, though can't remember the last time I had to do it 🤔 Thanks for taking the time 👍🏻 Good luck 🍀

[@Hazard.997]

Hi I have exactly the same remote controller but I can’t find the box anywhere in my shop, is there has to be a box?

[@Craig-MItchell]

HI Chelsea There has to be a control unit to active and control the motor that raises and lowers the door. I left a link to the garage door company in the description thegaragedoorguru.co.uk😉

[@Craig-MItchell]

The garage door guru in the UK have an eBay and amazon shops. thegaragedoorguru.co.uk for links to these. The parent company is www.fenlandgaragedoors.co.uk Highly recommended, even when I bought the original replacement kit, and had a few questions they were very helpful.

[@Mike.G]

Hi. I have exactly the same remote and box as yours, could you tell me what to do to close the door with just one click, and not like I have so far that I have to press the close button all the time

[@Craig-MItchell]

Pressing the close button is one click ?

[@Mike.G]

@@Craig-MItchell Yes, because I have to keep it pressed all the time to close the door. And I would like yours to press only once

[@Craig-MItchell]

@@Mike.G Ah, OK Michal, mine does only need one push on the buttons, I don't need to hold the button down while operating. I really can't say why your's doesn't work the same way.

[@Mike.G]

@@Craig-MItchell The installer said it was for the safety of people and animals nearby, but still I would like to be able to close after pressing only once, as when opening. I need to contact the company who installed it ,and ask if it can be changed...

[@Craig-MItchell]

@@Mike.G When I bought the kit from the Garage Door Guru, it came with some infra red sensors that you could install if you wanted to stop it closing on stuff in the way. I didn't install it and I've had a couple of mishaps 😏 If there were other people around, I would probably be grateful to have to hold down the button. So perhaps just live with it 🤔