Twin-engine LADA: 2.7 liters, 8 cylinders in a row

[@diegosilang4823]

BMW - Blyat Motor Works.

[@gabrielvieira6529]

LMAOO

[@slipsby2704]

CYKA BLYAT

[@aliabdallah102]

*Blyat! Motor works?

[@evolistic314]

@@aliabdallah102 yeah

[@speedyblacksheriff]

I love you

[@vibeandride2984]

When will he run out of ladas

[@GeorgiGeorgiev-ne9ps]

@GM Kof hard there are plenty of ladas in US. Seen few in prestine restored condition for 10k. For 5 you could get one regular in NY or anywhere craigslist have 1

[@GeorgiGeorgiev-ne9ps]

@GM Kof hard check NY craigslist. 25 year old restriction is long gone on these

[@mikecorleone6797]

We have sanctions against russia right now... no russian imports till that’s cleared up.. literally, not even mail can be delivered lol

[@poptartmcjelly7054]

@GM Kof hard then just ship the engine in from europe, but they're not as amazing as you might think. Mostly 1.5 or 1.3l, so not much power but they are pretty reliable, courtesy of their simplicity. Around where i live a good condition 1.3l lada engine goes for as low as 30€, or you can buy the whole car for 150€.

[@GlamStacheessnostalgialounge]

+GM Kof hard Trust me dude you're better off just getting a complete car. The engines are pretty small, are are adequate to pulling along the really light Lada bodies, but on a (I presume) modern pick-up? You won't be able to get the thing rolling with the larger "special variant" 1.6 engine, let alone the cheapest 1.3.

[@rjs198585]

Now I understand how the Russian car crash videos come about

[@quevicular]

AHAHAHAHAHAHAHAHA!!! GOOD ONE

[@allothernamesbutthis]

LS 8 ( Lada Straight 8 ) engine :)

[@ruikazane5123]

LS? Shit!

[@pepeiann]

Gonna have to swap that into a corvette :D

[@gassern121]

BMW 0-100=5.6 sec. Lada 0-100=Yes

[@hhs_leviathan]

Pfft, a good well maintained Lada (but preferably a 2105 or a 2107) can do 160 km/h my dad did 100 in a ZAPAROZEC XD he said the front wheels would no longer make contact with the ground at that speed XD

[@nicovanduin1553]

@@hhs_leviathan ok cool

[@HIDHIFDB]

@@hhs_leviathan last gen Ladas were good.

[@Lee01Mr]

Now make a inline 12 cylinder

[@ak14619]

Inline 69 cylinders

[@televisionandcheese]

Ohho , just you wait !

[@RedHeadForester]

kzbin.info/www/bejne/fJXHdYt8o82ceK8

[@MrLobsterity]

He has even made an inline 16 cylinder kzbin.info/www/bejne/bpK2foOdhbiledE

[@screener545]

16 cylinder

[@brokeboymotorsports5674]

Garage 54 never disappoints,I love this channel and how they do the things that no one thinks of ,and if it’s challenging they don’t give up ,props to the Russians

[@mvp42688]

my dad yeah same I agree! expect the English channel doest always post all his videos 😢😢

[@joemammy4309]

Dad!?

[@brokeboymotorsports5674]

joe mammy yup

[@brokeboymotorsports5674]

mvp 42699 Ik I looked on the regular one and it has some cooler creations

[@joemammy4309]

my dad well if your my dad im joe mammy

[@MixMastoras]

A guy in my neighborhood had 2-3 of this Lada model and he somehow managed to fit a second engine in the trunk of one of his. I don't know how was that even possible but I remember him working everyday on it while I was returning from school. I can assure you the sound of it was something angrier than a stock Lada engine!

[@grrr3070]

Next Turbo lada?

[@gerrymcs5195]

Next turbo lada v 12 lol

[@Kristo99]

plenty of turboed ladas out there, the engines can take the boost

[@boostedlawnmower9955]

@@gerrymcs5195 v16*

[@gerrymcs5195]

Lol

[@drfrenchfrythe3rd]

No. 6 turbo lada

[@damienblackmore5318]

Hey gentlemen! G'day from Australia! Love the channels progress so far, lots of laughs and needed information when you read between the lines. (: Thank you for your uploads and continued dedication to providing entertaining material and using your talents to do crazy things! :D

[@nickkraitor6560]

I love it, great idea. Cant wait to see how this project goes. Maybe after this is finished you guys could stick another two engines in the back so the car becomes a 4 wheel drive 16 cylinder, it would be interesting to see what kind of acceleration it could achieve, it would have to be the worlds fastest Lada then. Good luck with this project.

[@ak14619]

A lada veyron

[@nickkraitor6560]

Yes, I think it would be amazing to see

[@ak14619]

Samsung Galaxy S7 Chiron has a W16

[@micowikstrom7182]

kzbin.info/www/bejne/onOzg3WQqqisepY

[@jamestepesh355]

Sounds a realy great idea :)

[@tdgreenbay]

Makes me wanna import a couple ladas

[@robburdack4361]

This will tare its self apart....... No way everything was centered

[@Brock_Landers]

I am trying to be positive about this, but something tells me that you've got a good point. As soon as they go over 2500 rpm that first engine is going to self-eject itself out of the front of the car from the vibration...

[@diegosilang4823]

Never going to happened on Russian cars.

[@robburdack4361]

J B has nothing to do with the car......where rotation is used cupplings need to be perfectly centered or they will fail.... Infact the even say about the vibration.....that vibration will multiply by a magnitude for every 2000 rpm..... That being said its a interesting experiment none the less

[@danieldavidson8149]

Crank shafts bolt to the input shaft on transmissions in every car. Yes they have a clutch or a torque converter in between and they are solid as well. There is no reason this shouldn’t work as long as they are carful

[@robburdack4361]

Daniel Davidson yeah welding a pully to the outside of a gutted presure plate is nowhere even close to a clutch or a machined balanced converter...... The point is unless the milled and centered it there will be vibrations that will ultimately cause damage...... Im saying this as a person in the industry tha has spent many years building gear boxes and engines

[@_i-kr6eg]

R.I.P transmission, R.I.P differential 😂😂👍👍

[@TheGeezzer]

They'll run...and work...but not for too long! 😆

[@arba71]

I bet the thing that connect the 2 engines will be broken before the drivetrain.

[@HGSolberg]

Nah. It will only be like 120 hp anyway at best, and the drivetrain on old Ladas are pretty solid. It won't be a problem.

[@Digidi4]

@@HGSolberg no way it's ever gonna have 120 hp maybe 90 at max

[@paulwoodman5131]

The clutch is not long for this world. And two radiators would be better for long term "reliability" . There will be vibration, and it might be violent, can't wait.

[@mathieumelenhorst8308]

You have my deepest respect! Lada turns out to be the most versatile car My guess would be that the acceleration drops to about 15 sec to reach 100 km/h...

[@captnjaygreybeard6394]

Our family owned a red Lada just like that one, then my parents got a green Samara, and my first car was a white Samara. Hello from Canada : )

[@teardowndan5364]

An actual I8 engine would fire a cylinder every 90 degrees of crank rotation for smoother power delivery, not a pair of cylinders every 180 degrees. Should have offset the two engines by 90 degrees instead of aligning them on TDC. Though it probably won't matter much due to how roughly everything is put together.

[@SpaceShipDeathstar]

Best comment here

[@jonasthemovie]

I think that how roughly they were put together is an argument for firing in pairs

[@philtripe]

its not really a straight 8 so it really doesnt matter at all

[@TheMechanicalKoopa]

I agree with this idea as well.

[@robertr7923]

You can't offset the engines with 90 degrees. They vibrating pattern is periodic with 180 degrees so the vibrations would destroy the crankshaft or the whole engine

[@oddballdynamics.9658]

You guys are amazing mechanics. Thanks for the vids.

[@michael_the_chef]

the best car-related youtube channel, i like that :)

[@TheSocialGamer]

Even the next generation of car enthusiasts are Gods in fabrication and inventiveness..! Cheers to the young builders!

[@marygott66]

I love you guys you guys are something else man all the crazy stuff and you keep doing it keep doing it fellas keep doing it.

[@salmagana2698]

Final polish of this diamond in the rough of channel thumps up hope to see more of this type of ideas.

[@27Zangle]

Love these videos. Was able to microwave popcorn in the time it took the Lada to accelerate from 0-100 k/mh.

[@pcuser80]

You forgot to put the V belt on before installing the second engine.

[@albertstadt9853]

Don't need it. it only ran the alternator. The front alternator can supply for both engines if they want. Otherwise, it can run off the battery. Heck, it doesn't even have a cooling system right now. The belt is the least of its worries!

[@catrielsosa9373]

@@albertstadt9853 the original engine needs water pumping to absorb the heat, not sure if only one pump (of the second engine) will pull if the fist one isn't moving

[@fuzzwack1]

you guys forgot to put the fan belt on the back engine befor it was bolted together!

[@bergrud]

Velcro. Duhhh

[@infl]

you could time the 0-100 with a calendar in that thing

[@starbreaker1983]

Classic old racing trick, search up tommy ivo's showboat. FOUR buick nailhead v8's injected on nitromethane. All 4 tires would smoke for 1000ft. The LADA won't but I can't wait to see what it does. I know it will go faster

[@AtomicReverend]

I mentioned early american drag racing.. back when it was raw and innovative. Great minds think alike.

[@Mercmad]

I was thinking of Tommy's earlier dragsters with the two Buicks,side by Side , the ring gears were meshed together and one engine was connected to the diff . When He wasn't acting on TV he was innovating .

[@starbreaker1983]

@@Mercmad Those were the glory days of innovation no doubt!!

[@marcinkolendowicz9866]

Can't wait to see the next episode, when the project is finished and ready for testing :-)

[@987ntn]

You can check it all now on the original channel

[@daveyspider]

you guys kill me i cant wait for the second part.

[@987ntn]

Check out the original channel, all of this happened 3 months ago, they already put a third engine in :))))

[@tank4969able]

Awesome, fun video and idea!! Can't wait to see the end of this project and future projects!!

[@gpowerdragon9852]

Best piece of homemade Engineering that I have ever seen how to get a double the horsepower with home remedies just need a second Lada engine lol🤣😎

[@mikey27437]

Вася точно подметил - "Любит наш народ всякое ..."

[@MrAlexwoolf]

Franken-Lada, absolutely love it. I’m guessing lots of tyre smoke.

[@malcolmhutchison62]

Totally bonkers and awesome looking forward to next step👍

[@Elmantukas]

Was expecting two blocks to be welded together but this will do!

[@teamidris]

Yeh, I think they need to be joined with a bit of tube to give the drive coupling a chance.

[@jonnyrocket]

That's crazy. .😂😂😂...and I love it. ..the vibrations in the car will be outstanding. ..

[@memberberry8455]

Inline 8s have alot of torque. Try pullling an Antonov. Very exciting build. 👍

[@scottfirman]

My dad used to do shit like this. He couldnt make a normal golf cart, he had to put an engine in the back and make it run off a hydraulic pump. It was about as stupid as it gets. You sat on the fluid tank which gets HOT and as hell. He mounted a home made lawn mower blade under it made from hay cutter blades and steel. The thing was unbalanced and scalped the lawn as it was mounted directly under the golf cart and not on a floating deck.

[@acr_master5594]

damn i really hope they finish this im really interested whats its 0-60 is gonna be

[@fanfarigoule]

I would say 12-13 seconds if nothing goes wrong.

[@joshuacerini7631]

You guys are awesome, you do so much fun stuff

[@Smartzenegger]

Great! Don't stop there! Put 2 more engines in the back as well while you're at it! :)

[@neilgillam9919]

thats great. . you should move the front with the lights so its a stretched lada. cant wait to see you driving this. . maybe you need to strut the 2 engine blocks together to reduce stress on the flywheel joint ...

[@lanksterprice]

Take the fan off the front. Elec fans... radiators on sides of front motor, left and right side. water hoses will still be close.. Or one big radiator on front thats thick and tee off the hoses... Electric fans to cool

[@halfben7991]

Respect from Brasil Very Very creative best channel

[@kameljoe21]

A friend of mine built a dragster with 2 pinto motors. He even built a dual turbo many years ago, even whey everyone said it would not work...

[@nzsaltflatsracer8054]

One keyway on the original engine's crank is not enough to support the drive from the front engine & won't last long before sheering it off. The hillbilly fix is to drill the ballancer/crank part line & wack in some solid pins, 3/16" drill bit shanks work well for this.

[@altsa4410]

Totally agree. My prediction is this setup will not even make it off the starting line without shearing the crank pulley key. Figure the accessories originally driven by the engine (water pump, alternator, etc.) required 10-15 hp to operate and that the output of this engine is somewhere around 100hp. For the same RPMs, you are looking at least at a factor of 10x torque being transmitted through the same keyway. If the original keyway design was over designed by a typical factor of 3 means that you'll need at least 3 more keys of the same dimension to distribute the forces here...

[@ChongMcBong]

it needs a long bonnet and 6 wheels like the car in the German film "Manta Manta" :)

[@adelaideautowashes]

Or the pink Rolls Royce Lady Penelope would be chauffeured around in in the Thunderbirds TV show.

[@CallumTapper]

They did that with 4 engines

[@poptartmcjelly7054]

The Russian Nautilus :D

[@simonjohnhinton1938]

British leyland tried something similar back in the 1980's by making a V8 out of 2 4 cylinder engines. Needless to say it was a f**king disaster. It ended up in the triumph spitfire where owners often found themselves broke down at the side of the road.

[@peteregan9750]

NICE IDEA - hope it turns out well

[@Brock_Landers]

I think it'll multiply the horsepower and torque, as long as they can get the two engines working together and actually synchronize them, instead of one engine running the other and one engine scavenging of the other. It's not going to be an easy feat, but if they can get them both running properly and in sync with each other (AND the vibrations aren't too bad), then it should be faster in theory.

[@darthbolloful]

I think we should take a moment to appreciate the engineering that goes into some of their projects

[@TheSharkenader]

at two radiators up front in a v shape like one of those old school trains

[@commiellama]

4:27 Heels on ground, good squat sir

[@PropsMcFly]

Make sure and double the front engine exhaust with the second one, into one pipe.

[@usmanmushtaq211]

Get ladies to drive it

[@DaAsianJuan]

2 views and 16 likes I guess i'm early?

[@gsp3987]

Nope, you're late by 5 years... You've been in coma, and the channel has been dead for years. All joking aside, it was a good video.

[@dieselmiro7241]

how come u've seen 16 likes when 2 people only opened the video? haha

[@patrickm5217]

@@dieselmiro7241 just add vodka

[@dieselmiro7241]

@@patrickm5217 Ohhhh right good point, but the guy isn't Russian tho ! hahahaha

[@zevi2000]

@@dieselmiro7241 For a like to count you must press the like button. For a view to count you have to pass a certain % or duration in the video

[@TheKtscank]

hi Garage 54 and my name is kevin here from new Zealand and I like you good videos

[@drfrenchfrythe3rd]

Next need to do one where one engine moves the front wheels and another does the back.

[@bencebanati]

You guys are awesome!

[@cptwooldenstine3068]

Hey man i like your videos ,its crazy and new , keep it up

[@gibbles717]

Use beams and bolt the blocks together. Might keep the flywheel from bending and eventually snapping in pieces .

[@Matrix93R]

I was expecting an F40-like sound :v

[@Nidaavlogs]

Wait what? 😳 Cooling system? I thought you add heating systems over there!

[@dennis1143]

Wo fucked up the screen ratio?!? The videos where always 21:9 Now they are 21:9 video in 16:9 ratio. I really hate this because i now get black bars on the left and right side of my widescreen monitor..

[@sotosdragsteras141]

Says: we are going to the racetrack Actually: does pulls on a public street Noiceeeeee

[@TheHuskyGT]

That's cool, but I would love to see an actual Inline-8. Single crank and block.

[@historybuff9276]

Loss some vibration if the front fan blades were not busted like that. I lost a blade on my truck and had to drive it about 1 and half miles, screwed up water pump just from vibration and it wasn't a lot

[@RolandtheThompsonGunner]

As long as you guys connect everything properly and time them together, it really should work. Here in America I've seen a guy connect two V8 engines and then he did it with four V8 engines on one vehicle.

[@rustybacon54]

the engines need to sit in the same cradle, which then sit on 4 engine mounts from frame to said cradle. The motors will rip themselves apart from the different torque values. Also need to center and make sure the motors are squared to each other or its gunna throw that flywheel to a low earth orbit!

[@almost3pandas]

awe yeah! i was hoping you would do this one soon.

[@ylekyoti4496]

James bond called he want you to make him a faster car.

[@lemagreengreen]

Haha, not sure clutch pressure plate is really designed to handle that but will be fun to watch :)

[@Dia1Up]

This would normally be a 27 part series on other channels

[@Peter_Valoczi]

Saab Monster: en.wikipedia.org/wiki/Saab_Monster Now you have a Lada Monster!

[@dohc1974]

Lol this is crazy. I hope the welds on the flywheel are strong enough. Can’t wait to see the updates 👍

[@charlie15627]

You should have set the ignition on the second engine to fire between the firings on the first engine. Then it really would be like an 8 cylinder. The way it is timed now, it’s more like just having a 4 with cylinders twice the size.

[@charlie15627]

Rick Delair Yeah Exactly 😊

[@WoodsUnknown]

Awesome video guys can't wait for the next one, looks like an old gen 1 dodge engine lol

[@hugeshows]

Steven Wright would be proud

[@chrisangulo2329]

So a straight 8 cool nice video

[@punker4Real]

100k/h is only 60mph? or 62mph

[@getskared]

Yeah 21 seconds to 62 mph lol thats like horrible I have literally never driven a car that slow

[@RedHeadForester]

Off to the Russian channel to watch the conclusion! (even though I don't speak Russian)

[@dannmarceau]

Crazy Russians! Can't wait for next video.

[@holayosoyjuan8939]

Love those crazy ideas XD

[@TR2000LT]

Now you just need a 3rd motor...

[@terrahawk2003]

Straight up mad max!

[@CallMeAdam2023]

WHY IS THIS CHANNEL 3 MONTHS BEHIND THE MAIN CHANNEL???

[@JoelHershberger]

A lot of it probably has to do with the voice over. I am sure there are other things involved, but that has to be a big reason.

[@SwapBlogRU]

@@JoelHershberger no, it doesn't have much to do with the voice over. They give me whatever they give me to translate and dub, I usually get everything done in 2-3 days. The problem is that the English channel is relativelty young, while there are a bunch of vids on the main channel, so catching up might take a while.

[@Matthew-wj8cm]

I think it Will lose about 2 to 3 seconds off the 0-100 time, not sure about 0-60. Awesome build guys from Garage54! You could style it similarly to the Hot rod Lada 2101 from Kreosan, that wouldn't look bad would it?

[@joshmiller1928]

I want a Lada!

[@ReidHenderson]

Guess a Lada is great if you never in a hurry

[@Mostlyonoff]

3:43 "We'll hafta take a LADA this apart"

[@y1hardtop]

You should have offset the firing orders by 90 degrees, for smoother running and a more pleasing exhaust note.

[@y1hardtop]

@GM Kof hard The odd firing, of a 45 degree offset, would not run as smooth as 90 degrees offset. It isn't about efficiency.

[@AndyGeesGarage]

Anything done to a Lada only makes it better lol

[@theotherchannel2279]

Whoever drives this, I hope you have life insurance!

[@38911bytefree]

Nice fa bricating skills. Creative and crazy as usual. Good job dudes !!!!!:

[@petripat5979]

Motors needs to be attached together properly to prevent to much vibration

[@mdemosani]

You guys are fun to watch

[@ablueeyedmale]

as long as the shaft between both engines does not break this thing will be a tire burner.

[@blownbudgethondas1086]

This needs a 8 into one exhaust lol or 8 hater pipes out the hood

[@anthonyjcarolan3161]

That is the cool 😎 car with 2 engine I love ❤️ your video 📷 I can't wait for the video 📷 you have done a good job on that project

[@bp420a5]

That shit is BEAST!!!!!!! I want to drive it. Also want one of tho wicked Garage 54 stickers. Your guy welding is Genius. Good work fellas. Interesting as always.