We turn 2 Lada inline-4's into a V8

[@RyanMcIntyre]

A 13 minute video doesn’t even scratch the surface of the kind of time and trial and error these guys went through in making this engine. And even if the video was an hour, I’d be glued to it! 👍

[@Leasyy]

14 minute

[@masonlake5004]

@@Leasyyyou probably reminded the teacher about the homework huh

[@zombe5150_]

As a mechanic / fabricator..... 100% correct 💯

[@Leasyy]

@ nah, the tearcher always reminded ME of the homework, i didnt giva a flying f about it 😎

[@zombe5150_]

Last time I checked 13.55 is still not 14.......​@@Leasyy

[@ryanowens5172]

As a technician of over 15 years, seeing this level of engineering out of a shop with standard equipment is absolutely amazing. Nice work guys!

[@PuerRidcully]

couldn't they offset each block by the thickness of one rod and put rods from each block next ot each other on the a custom crankshaft? Then change the timing of one of the head by 90 degrees. That would allow them to keep the heads and camshaft stock. Why do you think it wasn't done this way? Or am I getting something wrong, geometrically?

[@phateracing]

​@@PuerRidcullyif they had kept a flat plane crank they could have, but the new crank is crossplane.

[@rogertallon]

​@@PuerRidcully it's easier to screw the blocks on a plan surface than cut it the right way and weld. Plus they wanted to avoid lubrication of the crankshaft. So they made it with ball bearing.

[@logicisdead9871]

It's amazing what you can do with a lathe, a mill and a welder.

[@MrLobsterity]

They literally invented and created their own engine internals. And they are an auto repair shop that started these blogging projects mainly to advertise their shop in the nowhere of Russia

[@markchapman2585]

Over 5 months of work for a 13-minute video. You guys are awesome 🍻

[@loganleborgne420]

Genius garage should be the name of this channel...what's next??? I want a collab with Elon 😂

[@gregquinn6827]

Now they get to put it in a car. Perhaps even a non-lada?

[@feelingold2995]

@@gregquinn6827 naaaa.. its going in a Lada lol

[@jeffreyshepherd8488]

I'm sorry, I was like 667. Wanted to leave it at 666 but it deserves more likes

[@jwalster9412]

​@@loganleborgne420 Well there Russian, and Elon is a egotistical moron so it wouldn't be possible.

[@SariahPendragon]

1:43 "The reason why it has so many holes is...well it just does." Top tier engineering.

[@somerandomcapybara]

Russian engineering at it's finest

[@alyaartzz8998]

Engineering at it's peak

[@arklanbk]

l was thinking that it might be for weight balance or weight reduction, theres no way these guys would drill it in the wrong spot and just go with it xD

[@jcdenton3062]

The reason why it has so many holes is because it's better to have it if you dont need than not having if you need it

[@TheLeftRbabieskillers]

It's better to have two wives than one, and it's better to have three wives than two, so more holes are always better than fewer.

[@kadeclary3173]

These crazy engineering projects are the reason why I watch you guys

[@volvo09]

Yeah, they are crazy smart working out the math and whatnot to get all the cam angles . Granted there's still issues, but just getting it to sort of run on it's own is huge! I'm sure just a couple degrees off on a cam lobe can cause problems, and they are doing it all by hand!

[@Pendragon69608]

This guys raises the bar everytime I love this channel going 2 years strong watching them

[@BlackPill-pu4vi]

They still haven't built a flying Lada. I can envision the process but, like this, it will take much development and testing along the way before it's ready to fly.

[@madzak9847]

​@@BlackPill-pu4vi actually they had a flying lada about 6 years ago or so (not a lada but OKA( they are almost the same)) they've used it as a basket for a giant hot air balloon, and even got fined for unregistered flight for that)

[@OptiplexAircraft]

@@madzak9847 wth, these guys really do everything.

[@malcolmwhite6588]

I agree -they raise my bar too!- 😜🙈💄I like engineering and automotive stuff that much😂

[@Pendragon69608]

@@BlackPill-pu4vi man can you imagine if they did tho ? lol

[@AACP25]

I'm from Portugal, I dont speak Russian, so thank you for having an English channel, I've been a huge fan for at least 7 years or more. From all the youtube channels I follow, this is one of the few where I never miss a video, You and your crazy projects are amazing, I really enjoy your content, keep it up!

[@AdvancedSoul]

Portugal caralho

[@xaartofering7494]

they just do what they are asked to do in the comments)

[@pauloconnor7951]

The usual mechanic / parts fitter just wouldn't get exposed to this kind of problem solving. This is giving phenomenal fabrication and engineering experience to you all !!!. All you guy's futures are bright !!. Run with it !!!!!

[@sarantdgr]

Congratulations to the whole Garage 54 crew, including the mechanics and assistants, for completing this difficult engineering project. You are hardworking guys and you deserve every video watching you!! 😃👍🏻

[@t9getup]

I used to operate a CNC lathe. The way those parts are machined you couldn't tell he did it manually. Just beautiful

[@bingysbackyard]

Most manual machinists can get the same product as a cnc can produce. but it's when you want 20-1000 of the exact same thing that a cnc will way out perform on repetitive part output in a very short time frame

[@renalshomlmes338]

It's all gears and feed screws, so it should look the same as cnc. As long as ur not a hack.

[@BDRMrTBag]

Man, I respect these guys so much with how they go about their videos, always something interesting and fun to watch! 👍

[@aldobede7025]

Only spent 5 months to get this result, is actually amazing, improvising old engines using standard equipment and machining tools, Well done👏👏

[@stylze5767]

Russians when you give them a welder and a cut off wheel:

[@Fred_the_1996]

Russians are just rednecks that live in the cold

[@fuckthisplace]

Lol it so true I do it alot

[@Daniel-vh9lg]

.....your wheels come off while driving.

[@MyJuupajuu]

​@@Daniel-vh9lg😅

[@hendrikmatthysen]

8

[@Generic_Tech_Support]

I wish I had the opportunity to spend a year in this man's garage. He is truly fantastic in his craft. The stuff i would learn.

[@sziabandika9601]

V8 Lada before GTA VI😅

[@Wok_Agenda]

cliché

[@td000009]

lost brain cells reading this before gta never

[@FBI_Agent_]

Yeah it's like people don't have any other life than virtual pole and lap dancer and gta 6 lmfao 😂​@@td000009

[@kapitan517]

Won't happen while GTA V is still bringing in that sweet, sweet revenue. Why butcher the "golden goose"?

[@Am4x667]

@@kapitan517 well they're making less and less revenue off GTA Online so they'll have to release GTA VI at some point

[@Goku-w8h]

This channel is heavily underrated👍

[@Mclaren_Mercedes_MP4_16]

but their russian channel has over 1 million subs

[@serg3659]

@@Mclaren_Mercedes_MP4_16 Over 4 million

[@Mclaren_Mercedes_MP4_16]

@ i forgot sorry because i havent checked

[@gnrtx-36969]

Channel name?​@@Mclaren_Mercedes_MP4_16

[@Mclaren_Mercedes_MP4_16]

@ channel is youtube.com/@garage_54?si=ikPP5PdF25RMmWHu

[@lefish643]

This got to be the best automotive channel on yt, any weird and crazy idea you think about you can find it here, can't wait to see this thing put into a lada and tested on the road!

[@feelincrispy7053]

These guys are crazy. Most channels would do this over 10 episodes. This is just another day for this channel and I love it

[@TiborRoussou]

8:35 "A Lada thought went into this".

[@kiratakamiyach.8294]

BA DUM TSSS

[@chrisbayus5189]

Not sure if the pun was intended there. I doubt it translates the same into Russian. Still funny though

[@LoseYourselfForJesus1234]

It never gets old..... Lada dah!

[@bigal9658]

these guys always manage to put a smile on my face !

[@tunahan173]

That was just freaking awesome. It is a pleasure to watch real talented dudes working on literally anything, and it is especially pleasing on cars ! You guys rock

[@15743_Hertz]

It's an incredible feat of engineering to get it as far as it is now. Let's hope the fine-tuning chases the gremlins out!

[@JT_771]

It's ALLIIIIIIIIIIVE!!!! Seriously though ... props for even attempting something like this. Excited to see more of it.

[@Quiche81]

To do the things these guys do can never be understated, to build a bespoke block, rods, cams etc takes some real talent, such an amazing bunch of fellas 🫡

[@melterofsnowflakes]

This is the most awesomely crazy thing I've ever seen! I love it. 3.0L V-8 needs to be in a sports car. Five months of work that paid out. Can't wait to see what it goes into.

[@thundermite1241]

Man if they went and made a cast block and cam that accepted the internals and valvetrain of the lada engines that would be sick

[@elcascoviejo5347]

some alternativ to the k48 proyect. i really want a 3s v8 or a 4afe v8 only vecause in my country they are everywere

[@martin-vv9lf]

not really, v8 cranks have larger big ends. apart from the pistons and heads, there's very few parts that would work in a v8.

[@lorddoobsworth144]

@@elcascoviejo5347 id love to hear a flat plane v8 based off if two 4age engines as thats my favorite sounding inline 4

[@Slippery_MOOSE]

@@martin-vv9lfit has 8 pistons mounted in a V, that’s the definition of a V8……

[@martin-vv9lf]

@@Slippery_MOOSE it's about reliability though. that's why you only see oem conversions of v8 into 4 cylinder, seldom 4 into v8. v8 uses larger bearings which aid reliability in an inline 4, but possibly raise fuel consumption due to the increase in mass.

[@CubCadetMan71]

This channel is awesome. One of the best on KZbin. I love Vlad’s banter and can-do attitude. If there’s one thing I’ve learned about these guys, they can tackle just about anything.

[@Carlifurafollas]

You are unbelievable, honestly, if you were from the US or somewhere in EU a good amount of brands would beg for supporting you!

[@johnjay5143]

You guys never fail to do things that no one's done before . You guys are the best back yard designers/fabricators on this planet . And funny ta boot . lol

[@mytebetme]

I am never disappointed watching your videos! You all are very intelligent engineers and real car guys!

[@whyjnot420]

That was pretty impressive. In military history you learn about so many engines that are essentially 2 or more engines connected together. In automotive history too, but it seems to happen to every successful piston engine ever used in the military. Anyways, you hear about this company or that country doing it and here we have some guys in a garage doing it too. That is pretty awesome.

[@andrewprettyquick2070]

Billet crank V8. Spicy!

[@CoochieKissKing]

It doesnt look like it's aluminum

[@PhaseConverterampV]

One of the top channels on YT. Russian’s are amazing at making mechanical abominations functional . Creative !!!

[@beany1987]

You guys are nuts and brilliant, making a v8 out of many different parts and lots of welding. Honestly surprised it didn’t rattle itself to death immediately!!

[@daverdaceng]

These Garage54 projects are amazing! Love it!

[@kadeclary3173]

Just on time!

[@Rom3_29]

This channel never fails to amaze me. The ingenuity is exceptional. Not to mention wacky imagination building something new.

[@h.cavidarabac3852]

This guys deserve your thumbs up. Especially last 2 videos are awesome.

[@mikeg9140]

You guys are the BEST at putting things together that don't go together. I love it!

[@SevieBallesterous]

Garage 54 is one of the most interesting channels on KZbin, keep up the excellent work men

[@kentworch]

Awesome video guys. Definitely needs fine tuning in the design, but really awesome that you guys are least got it running in the garage on something y'all welded together. Even 1 degree can throw off ignition timing on some cylinders and not others. Definitely quite a feat for something welded together. You guys are awesome, and love your views. Y'all are always doing cool stuff. You guys are probably my favorite Russian KZbinrs. Much love, and can't wait to see what y'all do next. ❤

[@aidanpysher2764]

The amount of engineering that goes into every one of your videos is absolutely amazing.

[@HaydenSuarez-vr7mr]

the creativity is awesome

[@elliotsever8308]

This guy, and all of his helpers, form a group of geniuses! Wonderful project! V8 engines will always be with us!!!

[@Dymitr_Nawrocki]

Finally, we were asking for it for so long.

[@johnhughes738]

People can joke about these guys but they are actually talented especially doing there iwn machine wirk and building crazy things for entertainment plus they are mechanically inclined i was a mechanic welder and electrician for yers i actually enjoy watching them come up with crazy ideas even though some of it does not do what they want they are doing it for entertainment but they on the serious side can probably do alot but no doubt about it every time they come in im glued to the screen watching them

[@kovacevd]

Never heard anyone joke about them. No idea were you get that idea. Didn't even bother to read the rest of your comment.

[@univisiontech1]

This channel is amazing

[@busyguy7479]

A lot of effort went into this project you guys are awesome. the froot of the labor never give up. i do not think anyone else could have pulled this off. well thought out guys. i wish these videos were longer so much to learn from watching , good stuff.

[@balazspetho5070AgroGO]

Amazing engineering. 5-10 men with grinder and welder create a V8. Meanwhile thousands of engineers cut down the 4th cylinder and we use 3 cylinders vibrators on 6 years of bank loan :D

[@inthegarage342]

From America with love. I love this channel. It's like watching the industrial revolution all over again.....in real time. What a blast!

[@David-yy7lb]

Freaking awesome man i love this channel....next challenge is to make a v8 lada one bank runs on gas and the other bank runs on diesel fuel

[@jeffryblackmon4846]

You are very impressive, daring experimenting engineers and technicians. Congratulations upon completing this complex design. Each of your videos is entertaining and enlightening. Thank you for making these videos. Greetings from Ohio, USA.

[@andrewprettyquick2070]

Old school oilways. Ohhh Artwork.

[@vermili0n]

You guys are insane. If I had to survive with anyone in the apocalypse it would definitely be the guys in your garage lol

[@mediocreman2]

11:41 'There's a Lada us'. 😆

[@jasperaj1]

You guys are crazy in the best possible way. Very impressive the things you try and manage to get going. Really impressive and I bet you guys learn tons of interesting stuff by your hands on no fear approach!

[@Evil-Jesus]

You Russkies are crazy. Love it!!!!!

[@boogie153]

The projects are still sooo insane, i love watching them more from video to video !! I'm waiting for the marriage into the Lada chassis !! 👍👍💯💯

[@t0ph3rstreams13]

I'm from South Carolina, and what I think would be awesome is after you figure out what it's going in! If you get it a procharger set up on that engine. You don't have to run much boost through the engine it would be cool to have one on the engine! I might be asking a lot but seeing what your group has been able to accomplish. I don't see this as an issue you guys would be unable to overcome! Good day to you guys 🫡 I can't wait for this project to continue in whatever fashion you guys see fit!

[@seapotatoes7260]

Boost would just blow it up lol Upgrading internals with precision pieces and guides for the timing chains to ensure the timing. It might actually push a lada again.

[@allmagicalme]

The engine size to displacement ratio is crazy lol nice work guys

[@7seriesmax]

You need to index the camshaft on the second block after you turn the crankshaft 90°. One of your cams is totally and completely off. One set of pistons is running and keeping the engine turning over that’s why the other side is blowing flames. You will also probably be way better off running two separate distributors.

[@leafbranch1872]

The indexing is done at the stage where they weld the camshaft back together?

[@bobirving6052]

Wow! Awesome project! 😃 I can’t believe you all did so much work for 15 minutes of fun video!! Hope to see more! Ooooh those connecting rods 😲😲😲 I wouldn’t rev that thing over 1,500rpm 😧

[@nvcnc]

"There's a lot of us and just one of it" is a surprisingly motivational quote

[@MrBoricua283]

This channel reminds me of junkyard wars from back in the day

[@tryhardnoob1140]

Some true Russian Frankenstein engineering. I'm here for it.

[@lorisklaws9612]

this is amazing and this is one of the best channels on the whole of yt, 5 months for a 13 minutes video is crazy and shows you guys care more about the final product

[@carsnanidiot]

3:04 with out these young guys this would never happend. 👍👍💘

[@brandona1370]

Oh that was really cool!!! Some serious engine science went into this one. I hope to see more of this creation.

[@42lookc]

5:19 You ARE brave!

[@OHydroTsunamiO]

not brave, russian

[@BrassMtn]

All these videos are good advertising and a great showcase for your shops work! So many awesome projects and the skill and labor behind making it actually work is incredible!

[@HakarDoski]

these guys have modified more Ladas than Russia had made them

[@alexmagee5743]

I would absolutely love to see a longer format for some of these videos. They’re so interesting and innovative and he explains everything very well. I’d watch an hour long video on this.

[@dustinbowen6411]

I want them to make a flat 8 where the blocks are joined at the crank journals. They would have to assemble the rods first and then slide the blocks together and bolt them up in some crazy way.

[@TehButterflyEffect]

That's just a straight 8, not a flat 8.

[@ratmanbrian]

It might be easiest to joint two VW engines, or Subaru.

[@SHAGG13]

It would be easier than this, it wouldnt take much just deck the blocks 1/4" each and add 1/4" plate with bolts on each side and then bolt them together on the outside... Basically each block would be one half a crank case and the adaptor just a flange to allow you to bolt them together around the outside .. put together like a VW.. not bad idea.... It might be easier to do it with a push rod engine because you can flip one block over and then use the same camshaft to drive full of sets of pushrods? Lol 😂

[@Klypin]

​@@ratmanbrianлибо сделать из мотора Субару двухцилиндровый мотор для мотоцикла 😂

[@tedted9427]

Every new video is a new challenge. You're getting better every time. Greetings from Greece!

[@mediocreman2]

5 months of work compressed to 14 minutes!

[@ysn2273]

Lets be real they are Russian it probably took them 2 days max

[@heavymetalrc7520]

This is crazy! The amount of work it took to make this is amazing. These guys have the best channel!

[@lexluthor6497]

Motorcycle out of only Lada parts. For the long siberian summer.

[@CoyoteFeral]

DAMN, you guys are legendary. The music, the humor, the skill! It all hits just right.

[@GearheadStew]

12:24 best facial expression! 😂

[@chriscruzA35O-9OO]

😂😂😂

[@ArionEquus]

This thing is apocalyptic... Im impressed that you got it to work at all. It can take 5 years, or more, to develop an engine. 5 months is pretty good.

[@vincehoffman179]

Those connectingrodds Look so cursed 😬

[@timwest72]

I love you guys ❤ thanks so much for the hard work you put into your videos! I have been watching you for many years and just cannot believe some of the crazy things you all do! Thanks so much to the translator who, without him, us English people would miss out. All my gratitude to everyone who makes this channel possible from Australia 🇦🇺

[@Bentleymetalworx]

There's a better chance they could engineer a moon landing than the US gov in the 60's

[@mariosuarez-rj4xd]

5 months wow. From the other side of the world we wish you success. Great content 👍

[@hearingthesmells2500]

These guys are incredible 👌

[@davekauffman8727]

Amazing build, hats off to all the guys who engineered the project, and the machinists who made it possible, you guys are the best! 🙂

[@graemew7001]

You guys are pure engineering geniuses, regular mechanics could come up with these ideas but I doubt there's many at all who could achieve the end results you do, especially this time, this is amazing.

[@WolfmanDude]

I have never seen something soo well made and dodgy at the same time, amazing work!!!

[@megaflea2k]

Massive respect for this channel, these guys aren't afraid to try anything

[@tylermontpetit9740]

man the ideas you guys have are freaking great and the fact that you make it actually work is amazing

[@enemymetalworks]

This is an insane amount of work and rapid prototyping, fantastic job

[@aarona8709]

I ABSOLUTELY LOVE this channel! Always something interesting to watch! Oh how i wish i had the tools to play and test like this! Keep it up! ❤

[@gearheadSMOKENJOE]

These guys rock I"m a L1 master tech for 40 years. I"v built some killer engines but this is way beyond my level..

[@SeeUFall]

wow, the Stuff u guys do is just amazing. I´m a car mechanic myself. But that Project is beyond impressing.

[@danted232]

You guys are great! Im amazed every time i see a new video just when i thought i have seen it all!!!

[@antoniovillanueva308]

The stuff that you guys have been doing is truly amazing.

[@Inkwell_LFW]

The amount of innovation that these guys have to just put these things together and also make it work so incredibly well amazes me every single second that I watch.

[@jerryevens9093]

I've seen a lot of crazy things on KZbin and some really impressive engineering, but this takes it to a new level

[@Gamesareus1]

I can't believe the stuff you guys pull off. Very impressive.

[@jessefink2745]

Y'all are the car KZbinrs I talk about because y'all do some very good work on here.