We make DIY floater wheels

[@whitesapphire5865]

I want a set of these for my tractor! Thirty eight in rear wheels - Neat!

[@anibalbabilonia1867]

Lmfao!👋🤣👌

[@scottinWV]

I actually want to see these on your tractor! Hahahahahaha! It will be different for sure!

[@whitesapphire5865]

@@scottinWV I've been thinking about this, and actually, I think it would be better if they were fitted to my four wheel drive tractor, so that would be two 36 inch rims, and two 28 inch rims. Very neat!

[@musthavechannel5262]

A few ideas, make them heavy on the bottom so possibility of spin is even lesser, make then convex, a bit make them full wheel and paint some of it black.

[@jwalster9412]

I think more professional rims use gyroscopes. The set of ball bearings did help to stop friction, but you need something to equal the momentum.

[@japserke]

These are floating centercaps, not spinners. Spinners keep spinning after the wheel stops turning.

[@Grimm-Gaming]

Yup like the McLaren speedtail uses

[@thefreedomguyuk]

Bentley style

[@SwapBlogRU]

That makes more sense, thanks

[@alexduke5402]

They are called floaters. Spinners spin, floaters stay vertical

[@2010HarleyDynaFXD]

They are called floaters in the US.

[@watahyahknow]

they work but looking at the amount of flexing from the wind buffeting youll need to either make it from thicker material or give them a bit more profile to make them more solid

[@cripticdestiny]

the originals are curved to the shape of the wheel spokes, and made out of cast metal too. that adds more weight to the heavy side which prevents buffeting and shaking

[@bobsmithinson2050]

The flexing you’re seeing is from them not being 100% centered/balanced

[@cripticdestiny]

@@bobsmithinson2050 could be. or thats just the wind buffeting due to thin sheet metal

[@tomt4181]

I thought it would be cool to make the spinner full size and to look just like the rim. It would look like the car was sliding down the road without the wheels turning.

[@yungkidnf]

That's essentially where the idea of DUB Floaters came from

[@ablueeyedmale]

I didnt think the car could look more trashed with the rubber band tires but you proved me wrong.

[@largebills337]

Good job. You guys should build a Lada in "V.I.P." style. Key features include very dark tinted windows and/or curtains, chrome wheels and accessories and so forth.

[@northcarolina209]

U ever seen Russian weddings lol

[@djcybercorgi]

Need a stretch Lada with a hot tub in the back and the Garage 54 guy drinking vodka while the shop guys drive...

[@angrypanda3014]

In America, they are very popular among unlicensed narcotic salesmen.

[@janlassen6101]

Never seen a wheel-spinner, or a floater that looked better than a normal wheel, and i never will..

[@barrymccockiner6641]

Imagine if the spinning rims were painted black. And in the US, it's only a couple cultures that LOvE them.

[@thehulkamaniabrother2.089]

Yeah girls and gays..😂

[@northcarolina209]

@@thehulkamaniabrother2.089 forreal

[@MadScientist267]

It's fortunately mostly dead now.

[@teardowndan5364]

I wonder how frequently bearings on these things bind up and fling the floating caps off.

[@240sxRule]

About as often as your wheel bearing fails and your tire/hub assembly go rolling down the road.

[@Root_T]

I laughed, but... probably doesn't happen at all. The bearings would start making all kinds of noise and scratching before they fully seized and managed to whip it around enough to chuck them off.

[@Varinki]

Rolls Royce has centre caps that do this to keep their logo always facing the right way up. On spinners I have seen in the past weren't weighted like these. They would slowly catch up to the wheels as the car drove a long and would then keep spinning when the car stopped.

[@RandysRides]

Black rims, more stability, and these would actually be kinda cool.

[@QuantumLeap83]

I want to see you guys pack wheel bearings with mayonnaise instead of grease and see how long the bearings last

[@anibalbabilonia1867]

lol 😂👍

[@rak6437]

Dang! Heck of an awesome idea.

[@lewzero]

So he mentions that the owner also has a Volga wagon, yeah, so does every family over there. But fails to mention IT'S ALSO 1UZFE V8 SWAPPED! That's _vital_ information my dude!

[@sgottoboni]

So FYI for everyone. Spinners were popular years ago. They usually spun up to speed when you drove and kept spinning when you stopped driving to make the vehicle look like it was still moving. That was the general idea. These are stationary.

[@jerryb1234]

Awesome job guys, thanks for sharing.

[@mybackhurts7020]

In the states Those weren’t in style 15 years ago when they weren’t in style

[@VochoTalacha]

I think that spinmer design look as if a monster was flipping the finger at you lol

[@MrLarsgren]

i always wanted to see how a set of peugeot 406 headlights looks like on a lada

[@ItsTurtleHD]

great work, i loved this one.

[@christophermarshall5765]

Nice job. Those are good.

[@edzams]

Sweeeeeeet DIY. Add them to your store for purchase.

[@rayceeya8659]

Man I can justy picture those things flying off and smashing through someone's windshield Final Destination style on the freeway.

[@Artesaani]

wave pattern could be nice with that little rocking back and forth. That made me thinking of transparent disc with water in it for authentic look

[@volvo09]

I don't know how I missed this one! Great work! It's a trip to see those cars in the USA. I live in an area that is more like Siberia, so none of that around here, just rusty trucks and big rigs! 😆

[@blarfneggs3728]

Paint some Skittles or M&Ms on it and you have the total look

[@SinginShooter]

Candy paint. :P

[@trm4life]

Do a set that looks like flames!

[@borne777]

or actually flames

[@markallendelisle]

Awesome video! What bearings did you use? Do they last at speed, how many miles did you get out of them? Pleassseeee share lol!!!

[@moefuggerr2970]

In my part of Florida those are rare to see. I have not seen those in many years.

[@countryracer69]

these was really popular here in the U.S. about 15-20 years ago! Really faded away here. a few still like em.

[@cs_devel]

Yes, the are a bit unstable. Maybe other rims with less air flow, so they won't be flattering during driving. All in all, they are cool.

[@DACoutBack]

Those are more like, Floaters. Spinners continue to spin after stopping.

[@SinginShooter]

Big Biznis is evolving.

[@frk380]

Paint with bright colour 👍

[@Pcoso]

can you show us how you made this please

[@1938thunder]

👍😁 Awesome Project Indeed

[@blazeroranger]

NY license plate? Or what state?

[@colinstu]

old NY plate. but the real RU plate is below it.

[@JLCra87]

I have actually never seen these in person before. I've lived in Texas and Colorado. I think a lot of time people see them in movies and people tend to think what's trendy in California is the same in the rest of the country lol.

[@cody4925]

This isn’t a California thing. This is a down south thing. Lol.

[@Superstallion1993]

They were more prevalent about a decade ago, but yes, it is a “southern” thing. As in, high melanin individuals put 28” spinners/floaters, “candy” money green paint, “oskritch” skin interior, and “mroosik” in the trunk of their clapped out 90’s impala or v6 charger with straight pipes. I misspelled on purpose btw.

[@JLCra87]

@@Superstallion1993 Crazy lol. I had never seen them growing up in Texas. Being that the only place I had ever seen them was movies I just thought it was a Cali deal. But I guess not 😅

[@bigbanger7548]

Yall still make these? Didnt see them on the site

[@RickBaconsAdventures]

5:40 a bunch of people *HAD* them, had them, as in 20 years ago lmao

[@williama29]

Dear garage54 why is there a 16+ on the lower right of the screen ?

[@scott3065]

Awesomely done ‼️👌 Greatings from Germany! 💙

[@rak6437]

Slava Ukrainie 🇺🇦💪🏾🇺🇦💪🇺🇦🔪👹🇷🇺

[@raspberryjellydoughnut5727]

With floater wheels you should put a back side of a hand there flying the bird

[@SerajEmad]

What is the car exact model?

[@crown674]

Lexus LS400

[@clutchkikn.]

Amazing job

[@RobertSmith-nx6tw]

They're called floaters

[@eventeresting1142]

Solid mounts for suspension PLEASE

[@raccooncitysurvivor7746]

Midnight club vibes

[@davouchi1]

That was 107% success

[@AmritGrewal31]

Man, love it! I'd want something cornyAF on it.

[@mwalker9401]

🌽

[@ElPikante503]

Like what? Gimme some ideas

[@houseofwonders1]

@@ElPikante503 a trump face

[@ElPikante503]

@@houseofwonders1 what about 4 middle fingers that would be funny

[@Trekkie4]

Here's a random idea, not sure if it would work though. Weld the big, powerful magnet behind the spinner that is pointing straight down and onto the wheel lip/outer edge. The idea is that the weight of the magnet would help keep the spinner in place, but also firmly pull itself onto the wheel, keeping it locked in place.

[@FireCrowsWorkshop]

Aluminium magnets? 🤣🤣🤣

[@Trekkie4]

@@FireCrowsWorkshop no, this approach would obviously need deep dish steel rims, which are attracted to magnet.

[@jctoad]

There is no advantage in adding a magnet

[@rickholmwood2000]

Uncle fester, I ❤ rev limiter!

[@adamrobson80]

Fire 🔥 job 👏 well done boys 👦 👏

[@ericgrajeda2671]

How much will a floater cost to make one for my car in America?

[@7mgte490]

I like that Lexus, I'm a big Toyota fan 😁👍

[@brandonyork9871]

You guy do great work hope you continue love peace

[@Z-Ack]

I found the guts to one of those air raid sirens or the nuke warning sirens that spin to make noise and a buddy asked me to do his breaks so i got to messing around and mounted the siren thing to the inside of a rear wheel.. it only made the wheel stick out maybe an extra quarter inch so not really noticeable. But lemme tell ya when he got to going above 40mph that sucker would start screaming.. and he brought it back to me like "whatd you do to my car because it is so loud now that it hurts the ears while driving the damn thing .. funny as hell..

[@dannydecare2116]

A spinner is wen the car stops it keeps spinning and the ones ur talking about is called a a floating hub

[@bitkarek]

was it filmed in early 2000s? :)

[@jordan-mn6yy]

also maybe the effect would be trippy if you used the worlds darkest black paint on the rims so only the spinners are seen especially at night.

[@Platypus_Warrior]

Make the most aero car. 2 seats front 1 at the rear. Make a carwagon that can move the rear windows and rear windshield to make it aero to save fuel. (no politics please) Big fan, I love your concept

[@LSnium]

OMG THATS JUST LIKE MY LS400!

[@velomobileusa8293]

You can count on seeing wheels like that at a dollar general store 😂

[@66chevystepside]

I like the New York State USA license plate on it - that's where I live 😂

[@jblob5764]

Definitely not common in the US either, that seems like more of a southern US thing like the Texas and Georgia area, I have only ever seen a set like this on 1 car, and it had out of state plates lol

[@dakoderii4221]

Where do you guys live? In Siberia? You had like 2 weeks of summer and now you're wearing coats again. 😮🥶

[@kevinh4910]

I have not seen a set of spinners in 15 years

[@donnafisher3957]

Love it❤

[@clipsonic4415]

What is the model of Lexus is driving ?

[@crown674]

LS400

[@tomt373]

You should think of marketing these along with your other stuff.

[@Grimm-Gaming]

That is the Fortress of Solitude being carried away by a helicopter!

[@djcybercorgi]

Has garage 54 ever done a video on lugging an engine? How much can you lug a motor before it blows? I tried going uphill lugging my engine in 5th but I just basically stalled the motor. Wondering if you can lug a motor to death?

[@scoobysean555]

Very cool 😎👍

[@edubb414bound9]

The problem will be the hubs will eventually fail and the floating face flaps which makes them look thin and cheap

[@mwalker9401]

Why the hell is this 16+?

[@fastinradfordable]

The covers look like they’re giving you the middle finger lol

[@davidwibben9886]

Simple engineering

[@johnjobber2219]

Ready for Da Hood

[@DonnieThronBerry]

Floaters are baller

[@jeremylewis4450]

Honestly I'm from a high snow area probably why not popular in Russia. It's a snow trap. Let's see a video on a device that scrubbs ice and snow out of the inner rim so we stop destroying front end components in the winter times

[@corollagl82]

Love it

[@jasonforrest9833]

Me personally I think they are goofy. That's just my opinion. But ya'll did an awesome job making those.

[@OFFICAL-FULL-SENDER]

Also this vid rocks

[@swat1229]

Think I'm gonna use this technique to make Rolls Royce style center caps

[@ICKY427]

man i havent seen spinners in a LONG time. i dont think they are "trendy" in the states anymore

[@danbergthold3481]

Whadayamean? In 'merica, iterally EVERYBODY has spinners or floaters on all of their cars and trucks, their riding lawn mowers, their snowblowers, their boat trailers, their skateboards, motorcycles, bicycles, unicycles, golf carts, wheelbarrows, grocery carts, office chairs, rolling suitcases - everything with wheels. Only real geeks don't have spinners or floaters!

[@LSnium]

@@danbergthold3481 fidget spinners, underwear, subwoofers, ac units, gaming computers, and DJ Turntables.

[@fangthewarrior]

Car customization, Wheels: Garage54 Style

[@mybackhurts7020]

I wish I could find some old spinner hubcaps They looked so bad 😂

[@shawbros]

I saw a few of those. They were as ghetto as crown air fresheners and curb feelers.

[@ninjabongtoker1]

I haven't seen any body with spinner rims in a long time I think the rims bearing would break after some time

[@R3LLIK24]

love these guys of course his name is ivan lol

[@yliaabiaad]

No sound

[@ericbeeman8717]

Had ya made em not heavy on one end when ya stop they would spin instead of staying in one spot for the most part

[@robokid20001]

That's the point of them though, lmao.

[@ericbeeman8717]

@@robokid20001 ah no that's not they're supposed to spin not set in one spot and barely move if ya look at the ones made in factorys the part on the outer rim is in constant motion when they stop and go they spin

[@robokid20001]

@@ericbeeman8717 These are floaters, not spinners.

[@justinlangiewicz975]

I wanna see a Lada limo

[@NicCageForPresident2024]

You're about 15 years too late.

[@1985toyotacamry]

Damn I was a teenager when they came out.... I find it odd

[@TimmoDukes]

Spinners would be better. Same ideal but whole rim. If you do I good spend backwards, moving forward would really catch people's eyes.

[@royaltybuiltco]

Can you make me a set?

[@ItzNickyJ]

I think floaters have grown on me over the years as I personally have a 78 chevy malibu classic I want a set of these for.

[@jordan-mn6yy]

the only cool spinners i seen look like a copy of the rims behind them with perfect balance a hidden mounting point and they spinning while at a stop

[@SillyGoose69]

Yes sir

[@powerpower1797]

STUCK OPEN FUEL INJECTOR WHAT HAPPENS WHEN YOU IGNITE THE WHITE SMOKE?VIDEO IDEA...

[@crazygeorgelincoln]

Vlads dropped a floater and it's a danger to shipping!