Are Budget Coilovers Worth Buying? MAXPEEDINGRODS REVIEW

[@GarageBuiltHondas]

Buy Maxpeedingrods Coilovers here - www.maxpeedingrods.com?tracking=58deec5d-3b72-49e7-bfe2-aae52bcbb8af

[@franciscoolvera6871]

Can you please send the direct link to the coil overs. When I search for a 91 crx, nothing comes up. Thank you!

[@GarageBuiltHondas]

Any that say 92-00 Civic will work.

[@omarq1414]

Just bought a set for my daily CRX. Lets see if I can do the install

[@GarageBuiltHondas]

👍

[@DEATHVALLEY_915]

What engine does this crx have sounds great af bro 😎

[@NanceLvr]

Dude good angle with the suspension camera. Thats what the ppl wanna see

[@GarageBuiltHondas]

Thanks man!!

[@ghostpimp]

RIGHTTT !? people never give a good review

[@GarageBuiltHondas]

👍😃

[@blackjack444....]

That was cool!! NEW Subscriber!!

[@That_fella_named_J]

@@GarageBuiltHondas how is the adjustable dampening? Do it really feel any different from all 24 clicks of adjustments? I have non adjustable racelands and wish I had got something with more for less

[@Highway94]

They've been fine with me and I've had them for a over a year on my 1995 Honda civic ex. I first had them "maxed ' out on its lowest setting to " slam " the car and I recently raised it up and it's still a comfy ride. No excessive bouncing they feel fine to me

[@GarageBuiltHondas]

Nice, appreciate that feedback!

[@johnnyguzman5324]

How long do they go ? I got some for my is300 but i want them tucking

[@GarageBuiltHondas]

No idea. I didn't test them out like that.

[@Highway94]

@@johnnyguzman5324 do you mean how long they last till you need to replace them or how low can you make the car?

[@johnnyguzman5324]

Yeah i meant to say how low they can go

[@teedeps7011]

Finally a good review of these with somebody that has experience with good suspension, instead of reading reviews that someone's dad sisters husbands grandfather seen on KZbin from their cousins brothers sister boyfriend friend who had a set who never put them on but said they were junk lol👍🏽

[@GarageBuiltHondas]

Lol 👍

[@johndoe9443]

Sadly I could keep up with all of that...

[@c.g.4195]

😁😁whole family except the person who do the review

[@_i-kr6eg]

Clueless this guy is not a mechanic or technician. I'm been in the trade and these coilovers are absolute rubbish

[@poonjaber1122]

Great idea of putting the camera in the well... def never seen what that looks like before

[@Undergroundgrows]

Jon I appreciate everything you do for the community, I've got a 90 civic si I love and do all the work on, I've learned a lot from you! Thank you!

[@GarageBuiltHondas]

Love to hear it, thanks for the feedback!

[@freshfixtv4608]

I threw some maxpeedingrods on my 2006 tsx. While they aren’t the best they are surprisingly really good for the price. Had em on for over a year. No issues.

[@GarageBuiltHondas]

Thanks for the comment and feedback!

[@MiikeyLawless]

Finally, a decent review of these lol. Was seriously considering these since i daily drive 99% of the time. No need to wear out a nice set of coils out on the road if these handle adequately. IMO.

[@irongutsspeedshop3334]

Michael Peretto these are literally junk. I’ve personally seen 1 snap and 2 blew within 2 months. I could never recommend even if paid.

[@Timm_W_h_i_t_e]

Do not buy these coilovers unless you want to replace your entire suspension in less than 3 months! They ride horrible no matter how you adjust the dampening!

[@Redblock_Alex]

Mine blew up in the box so

[@EazyFieldsports]

Iron Guts Speed Shop really. Seems like there’s a lot more that could factor into that such as they weren’t installed right Cause 99 percent of people say their good. Can you explain why they exploded ? Was this recently ?

[@Shadowwolf975]

@@EazyFieldsports seems like multiple people in this post were saying something about it fucking up their suspension, that's a hard no from me.

[@robbgnarly]

I have a set of these on my 1998 golf and for the money, they are great . Not as good as the BC's on my Nissan, but for my VW they are just fine. not too stiff and handling is way better

[@GarageBuiltHondas]

Thanks for that input!

[@TheRealTJDoyle]

I have Maxpeedingrods coils on my SC300 and I was really surprised at how nice they rode. I was super scared they would bounce like chopped springs. I'd say 1000% worth it.

[@GarageBuiltHondas]

Thanks for the input!

[@patwebber1059]

I’m putting in a set next Saturday in my SC300, how do they hold up?

[@TheRealTJDoyle]

@@patwebber1059 ran them up until I sold it a few months ago, ran fine. Only 2 issues I had: you can hear the rear shocks hiss when you go over bumps? And out of the box the spring preload was not set properly, so it rode uneven.

[@Noooci]

Use them on my EK K20 hatch on the Nürburgring. Good budget option 💪🏻 56laps without any issue

[@GarageBuiltHondas]

Love that feedback!

[@Noooci]

Garage Built Hondas yesterday there the GP Track was Open and it’s really steal 🤞🏻🤞🏻

[@cliffynjovelyn893]

I have had the maxspeedingrods coil overs in my RX8 for nearly a year now and no complaints, they are stiff and well built and cheap as chips!

[@sammylegaspi2214]

Is it good for long daily drive?? Not too much abuse but a good amount of use yk

[@cliffynjovelyn893]

@@sammylegaspi2214 yes they are, just remember they are stiff though so if you have an older car your plastic interior might rattle lol

[@JM-jq2mu]

I bought some max speeding rods, I have done 500 miles on them and they're holding up great I would recommend :)

[@GarageBuiltHondas]

Thanks for your input! 👍

[@danieldesmond3422]

Thought it was a Chris fix video at first with those blue gloves 😂

[@shade8697]

Just ordered a set of these for my 02 Mazda Protege SP20, seems like they’re solid!

[@hunggarguy]

The most comprehensive and well reviewed video for these coil-overs I've seen. I can't wait to put these on my 300zx. 👍

[@aoclive6710]

Instagram ?

[@Chevcav2001]

These worked great with my 90 300zx! I loved the ride quality and I was able to achieve just the ride height I wanted.

[@codyyy0]

Glad people have good reviews I’m going to get some for my 300 too

[@alessandropoggi9488]

one of the greatest 90's car even created imao, good driving skill too and finally thank you for your test, the camera on the dumpener is a fantastic plus

[@GarageBuiltHondas]

Thank you!

[@johnrathamone3261]

I have them on my miata and my EF hatch.Good for a budgit suspension I just order stiffer springs for them ,with a little over 6k miles still feel good.

[@GarageBuiltHondas]

Thanks for the feedback John.

[@GarageBuiltHondas]

If interested in getting a set here is a coupon they are offering currently! USE THIS COUPON CODE TO SAVE! "GBH" - 8% off for all orders over $200 USD Buy Coilovers Here - bit.ly/311cETn

[@justinl8886]

😏

[@r0bdoggstge1]

@@justinl8886 just ordered a set for my E46. Thanks

[@alessandropoggi9488]

i already bought them from Ebay, but thanks for the gift

[@reachmorelove4293]

Thanks

[@goodmorningpod]

Garage Built Hondas do you have the link for the same color ones you got?

[@az_3kgt714]

I use an exact copy of these coils on one of my cars they've been on for months now and they're doing just fine. Would definitely buy them again. Really great deal for only 200$

[@GarageBuiltHondas]

Agreed! Thanks for the info, love hearing other people's experience with these coils!

[@frdbtr]

Nice! I would like a long term update on some of these cheap Chinese parts to see what your opinions are on them Jon. Sometimes these parts work really well in the short term but wear out quickly.

[@GarageBuiltHondas]

Definitely. After the last event I'll make an update, possibly a small video update on them even.

[@johndoe9443]

@@GarageBuiltHondas that would be great as I'm in the market for coilovers for my maxima and don't have a lot of funds for the higher end. Lowering springs won't work as I don't want camber bolts. Thanks.

[@GarageBuiltHondas]

@@johndoe9443 you're welcome!

[@frdbtr]

Did I miss something? I wouldn't put skunk2 crap on any of my suspension. I learned that lesson with their cheap chinese adjustable cam gears that just about ruined my build.

[@tadman3d]

Its pretty rare to see actual track tests of this kind of product. Im surprised there wasnt any dislike of them at that performance.

[@GarageBuiltHondas]

They're solid for a weekend track kind of dude. This car is built to have a little fun, if you want to be more competitive then something better would be needed.

[@BvtecturboEKHATCH]

Those ones you had are for a ek9 96-00 civic is why there bigger single cam cause it looks the same as mine on strut fork with AL

[@GarageBuiltHondas]

👍

[@baddestburrito]

Amazing video! Loved seeing the suspension in real motion! Edit: it's these little touches of genius, that set this channel apart. I cannot recall when another presenter has taken the trouble to mount a camera in that exact place.

[@GarageBuiltHondas]

I'd like to do that at the track next time!!

[@baddestburrito]

@@GarageBuiltHondas If it's one of your videos, Jon, I know it's gonna be super awesome. You've got this watchability thing down pat!

[@Jeremy_Hill_2020]

I got my coilovers installed on my '96 corolla today huge ass difference lol just wish my city had a race track

[@GarageBuiltHondas]

👍

[@Jeremy_Hill_2020]

@@GarageBuiltHondas my corolla only has 105hp (which is really slow) & if my city had a race track, I would test them out anyway & see how my car performs on coilovers

[@GarageBuiltHondas]

You should...we have a few 100hp older Hondas that race at our track. They're still fun to drive.

[@michaelhite1433]

CRXs are like big go carts. I loved my 88, if it hadn’t been such a rust bucket I’d still have it.

[@loganenlow4603]

Would you reccomend if it were in better condition? I dont know much about Subaru as a brand

[@michaelhite1433]

Logan Enlow CRX was made by Honda. I have Subies, and love them.

[@boxer951]

I got the same maxspeedingrods for my 08 Civic Si back in 2017 and they were noisy,stiffness was ok but the real con is that the shocks blew within three months!! I then went with rokkor coilovers that use the stock top hats and it really made a huge difference in ride quality. It was way more comfortable,still stiff but not exaggerated Luke theaxspeedingrods and they lasted me over a year till I totalled my Si. The maxspeedingrods coilovers shocks were not adjustable though so idk if that would've made them last longer or gave me better ride quality but still the metal to metal top hats that come with the coilovers are noisy compared to rokkor that use stock oem top hats,so even for that reason alone I would stick with rokkor which are a bit more expensive but worth it.

[@GarageBuiltHondas]

Thanks for the input, good info!

[@Tonysboat3]

What a great review, love the camera in the suspension good to be able to compare the movements with the road surface. I think the company is doing fairly well in advancing their product which is good to see. To those saying low price Chinese parts don’t have longevity all I can say is I have this companies turbo on my landcruiser with no issues for 60,000km (I’ve seen far less from far more expensive turbos). I will definitely be getting a set of these for my Accord CD5.

[@GarageBuiltHondas]

Thank you! Appreciate the input you left also. Let's hope the company continues to improve on their project. I have a 6 month review video out on these coilovers now also.

[@Tonysboat3]

Yep saw that too good to see they are lasting I’m hoping to buy and install mine in the new year😃

[@Nasonix2]

Look at how these "shocks" perform on a shock Dyno and you'll be shocked. 😅 There's zero dampening initially. About 5% dampening force as you'd expect there to be. Then later on in the high speed area they spike sky high in force all a sudden. It actually goes off the charts. What that tells you is they're progressive in category (Linear and digressive is what you want for a car, not progressive). But not just that, the fact that it goes off the charts at the high speed area means only one thing.. the dampers shim stack it self is Max'd and isn't doing anything except compressing hydraulic fluid. To say these are bad is an understatement. They're literally the most undesirable dampers you'd ever pick for your car. Zero body control, zero initial turn in response (other than what the springs are doing) and then when you hit a medium size pothole going over 30+mph, youll bounce up in the air (the force of the springs with no dampening) then when you come back down BAM the dampers suddenly apply their maximum force. They have tons of lag, no motion control, and are overwhelmed from an average pothole. Cmon Be real guys . Do some research on these before you recommend them for others to get screwed by. You can get some real deal linear/digressive dampers twin tube or hell even monotube for just a little more money than what these cost and these are garbage shock🗑️shock🗑️ shock 🗑️ shock 🗑️

[@efboiz5302]

Sadly I still haven't got the issue of the factory defective adjustment knob resolved after 2 weeks of emailing back and forth between someone with broken English from China. Took almost a week to finally get someone to respond. Beware ppl, customer service is almost non existent if you are unlucky enough to need it. That being said, Ive had mine on for a little more than 3 weeks and I really like them otherwise. I changed the preload and set it to basically zero bc their preload was completely different in each coilover. Also running nearly a 3 finger gap with a couple clicks away from full stiff... On 3 out of 4 corners at least 🤣

[@GarageBuiltHondas]

I hope they take care of you!

[@celestialyidum]

Those are probably the cheapest coilovers I've ever seen lol I was expecting $400 but $250?!? God damn! lol

[@GarageBuiltHondas]

No kidding! I hadn't really searched for "budget" coilovers before until this company approached me! I dig em so far!

[@ravenemir5208]

@@GarageBuiltHondas how are they holding up honestly? (update)

[@adriangutierrez8177]

They cost $450 for my E90 335i. As long as they get the job done I’m getting them

[@youngprince4110]

This is the worst coil overs I've ever used ...Have them on my subaru legacy B4....Its a nightmare.....Dont buy this for daily driven....to me its for the track (smooth surfaces) or light weight cars

[@GarageBuiltHondas]

Here ya go in case you missed it. kzbin.info/www/bejne/gaSQf617jKmmfdk

[@thealexanderramirez]

Greetings from Las Cruces NM! Great video! I have watched many videos on this brand of coil overs and they all were pretty biased and compared them to expensive and top of the line coil overs. Your review was honest and straightforward and I will definitely be purchasing these for my cd5!

[@GarageBuiltHondas]

Awesome man! Say hi if you ever catch me out somewhere!

[@Spudstrodamus]

That's awesome you race with your dad. Cant wait to see a follow up in how they are holding up

[@GarageBuiltHondas]

👍

[@xSeRosiSx]

What I find amazing is the color of your CRX (orange-red) looks exactly like the color of my old one/parts car. It's interesting that two different people colored their CRX's the same. Or maybe the same person owned both yours and mine at some point and just loved that color. Painting style nearly matches as well, just sprayed haphazardly and on the trim pieces as well.

[@GarageBuiltHondas]

I believe some people liked the OEM maroon color found on them originally I actually really like this color. I'd like to get outside and paint the moldings back to black and try to chip the rest of the paint off of the bumper moldings too.

[@xSeRosiSx]

@@GarageBuiltHondas For the 10 years I had the orange one the only thing that ever threatened to take the orange paint off the trim was a good pressure washer. Sure a screwdriver or putty knife would have done the trick but back then it was still new to me and I didn't want it to get too scratched up. Check this out, I collected a bunch of images of it and my most recent, '91 CRX HF, as you'll see my worries about it getting scratched up were all for nought: crx.serosis.net/

[@anthonyjones254]

Got a set of these coming for my Accord. Mainly because I just went from some cheapo 15's to a fresh set of 5 spoke 18's and I want to close up the fender gap.

[@GarageBuiltHondas]

👍

[@19ZOLTAN18]

I have to say this. Honda’s are very universal with suspension. The reason being is they use multi link suspension on the front and sometimes on the rear. The factory springs rates are pretty high. So these Chinese coilovers will be ok for now on a Honda.. but if I put it on my gc8 wrx, they would be absolutely awful. I’ve been in cars with these coilovers. Yeah if you’re a tight ass buy these Chinese coilovers but if you really love the feel of going around corners, spend a bit extra. It’s worth it. Trust me. You’ll love every time you get in and out of the car

[@GarageBuiltHondas]

These are great for Honda's...so far. I can't stress it enough and I'm always mentioning that I want to see if they last. The price justifies it when you're buying a Honda for 1k or so.

[@2_2_4_3]

Some are decent.. I had GODSPEED on my last Civic EJ1 and they were great. Not expensive and not cheap junk. They gave an excellent ride, and had adjustable damper.

[@GarageBuiltHondas]

I agree. I've seen some solid Megan ones also.

[@Punny1234]

The usual great tutorial and content, Jon. Love seeing that your dad enjoys and shares the same hobby as you.

[@GarageBuiltHondas]

I hope he continues to enjoy it. Time will tell!

[@sagesends]

nothing like some max peeding rods am I right ladies

[@GarageBuiltHondas]

Hahahaha

[@RichardSmith-ic1zw]

The ladies love them the men and lesbians are jealous of them except the gays they also love them

[@costa_349]

Damn

[@oldsklteg]

Love the budget coilover option man. While im with you in purchasing the most cost effective mods, inexpensive coilovers never hold up the as their more expensive counterparts. The fluid and seals seem to degrade rapidly when put to track use or just daily driving on crap roads. It would be interesting to see a long term review of these after a few track days. That B16 sounds nice 👌👌

[@GarageBuiltHondas]

I'm curious too. Maybe this could be a company that actually keeps trying to make better products and make a name for themselves. They all have to start somewhere.

[@McDzy]

I agree. Have to start somewhere! Can’t expect a product to come out excellent at the beginning.. how are they holding up so far?

[@GarageBuiltHondas]

No issues for me so far!!

[@Bark3rd]

You could make that dent above right rear wheel 90% better by putting your hand inside the trunk and pushing out on it. Try it!

[@GarageBuiltHondas]

I'll give it a shot!!

[@BurtyHaxx]

just done use them in a wet country, the rust up real quick here in the uk. had them on my lexus, within a month i couldnt adjust them anymore

[@GarageBuiltHondas]

Ouch. That's terrible.

[@andrewaardema7572]

Literally just fell asleep to this music! 😍

[@GarageBuiltHondas]

👍

[@PNDASnipin]

@garagebuilthondas 4:38 your not supposed to make height adjustments like that ! The spring is prefixed from the manufacture at a default setting . Your supposed to spin the shaft to make adjustments hope it’s still holding up .

[@GarageBuiltHondas]

You're not looking closely enough. The perches are locked against one another. When you do that, you can now crank it and raise/lower the entire assembly without affecting preload of the spring.

[@SwaglessFishy]

I bought these same ones for my prelude, lowers the fronts maybe a quarter of an inch but that’s all, love how they ride though. wish they’d go lower is the only thing.

[@GarageBuiltHondas]

This set can go pretty low on this car. Not sure why yours is set up different.

[@SwaglessFishy]

Garage Built Hondas Dont know man, hardly lowered it at all but i can put the muffler on the ground for the tears

[@efnmadaboutcivics88]

Well, you've convinced me lol. I'm getting me a set! Next is a 5speed swap (not about that automatic life) but cleanest EF I've seen in years so I had too. Mpfi and 5speed swap then turbo it and I'll be happy... For now hahaha

[@GarageBuiltHondas]

Use the coupon code for a discount!

[@efnmadaboutcivics88]

@@GarageBuiltHondas I had a quick question, cylinder 1's valves are burnt white and the rest are black covered in soot any idea what that would be?

[@GarageBuiltHondas]

@@efnmadaboutcivics88 too lean. Possible injector not flowing as well.

[@efnmadaboutcivics88]

@@GarageBuiltHondas I kinda figured, I'm hoping all this fixes me not passing emissions lol I had to run it lean and get her through that way. Thanks Jon you are the most informative person ever when it comes to the EF community. I appreciate all the help and info you have provided over the months lol you're the greatest

[@hondarsr505]

just got mine for my project 05 scion xb!!! cruiser!

[@GarageBuiltHondas]

Nice 👍

[@havelandkhuong1973]

I have those same coilovers on my 8th gen civic and they are great 👍 in my opinion.. they do the job and the price is reasonable

[@GarageBuiltHondas]

Thanks for the input💪

[@salesituitahi313]

Thanks bro I'm in the middle of buying a set for my 05 corolla but after watching this I will get it and make sure I set it properly 😉 eBay coilovers 🤣

[@GarageBuiltHondas]

👍

[@cameronjones2568]

Grabbing some of these max speeding rods for my 99 Avalon comes Friday

[@Alexander-we6ub]

How did they turn out, looking to get some for my avalon

[@cameronjones2568]

@@Alexander-we6ub bruh please don't! Those shits literally were clunking out of the box wore my suspension the front don't lower like the back do and when I put stock struts the right side sat higher even before stock struts so the stock strut brand wasn't the problem

[@cameronjones2568]

I regret this so much smh

[@Alexander-we6ub]

You have saved me a lifetime mate , and I'd be spewing if I was you , unbelievable how they can sell such a garbage product

[@lioneyes2675]

Nice video on the tracks love it.

[@ChutneyInc.]

I too would like to thank them for sending them out. Not enough reviews

[@GarageBuiltHondas]

👍🙏

[@motorized2105]

try cleaning the battery terminals, main alt cable, and grounds before replacing alt. my wagon used to do the same thing at lower rpms.

[@GarageBuiltHondas]

No luck. Ended up being the reman alternator was junk.

[@motorized2105]

@@GarageBuiltHondas Az.Orlly. or Advd... not surprised. Seems like "somebody" shoulda invented a lithium 12v replacement for acid lead batteries that doesn't need an alternator...

[@keith2011]

Came here to find out if I should buy the suspension for my civic. Ended up just listening to that sweet vtec. So should I buy them or not

[@GarageBuiltHondas]

Up to you man. Can you afford a better brand?

[@stuckhere1797]

I have max speeding coilovers on my 88 vw cabriolet.....have had them on for like 5 years..I drive her fast and hard and they have held up and kept me from going over the cliffs....

[@ExciteLetsPlay]

These coilovers or koni shocks with eibach springs for track driving?

[@GarageBuiltHondas]

Koni, but with coilovers. Then you can pick some spring rates of your preference.

[@josiahjmejia]

The exhaust sounds great!

[@GarageBuiltHondas]

Thanks! Skunk2 catback

[@BellozeCountry]

I really enjoyed this content, I'm new to building a 88crx awd (s-1built all d way baby) and this video have me sold on these coil overs so much goes into a build and when u don't know this is great!

[@jvh22a]

I was just about to order agx and springs and boots. About 420ish. I'll have to check this out. Putting together a super cheap track car

[@GarageBuiltHondas]

I've had a good experience with them so far. I hope they don't leak anytime soon.

[@Curtis1900]

These seem great for being a budget coilover you can’t beat that price for the adjustability that you have especially if your a new driver learning to adjust suspension

[@lexsanchez8554]

Am on the process to change all the shocks on my Ef hatch, am on budget and this coil overs looks good, my ef is a daily so i hope to this aren’t feeling to bumpy , cause the streets on country are a little bit “shi***”, thanks for the excellent review and help for the community bro ! Greetings from Honduras 🇭🇳

[@GarageBuiltHondas]

Greetings buddy! They are a pretty decent set for the price!

[@Rachu48]

Jodel!

[@j.l.wickham2531]

Just ordered a set for my '92 Celica ST. I just put bigger brakes off a Camry on it. How it stops with authority. I have a 3SGE Turbo VVTI & 5 speed that I need to install. Now i have a 1.6 4AFE & Automatic. I only paid $300.00 for the car and it runs great, but is sorely lacking in the power department. I would love to get the parts to make it AWD.

[@GarageBuiltHondas]

Nice, those Celicas are really cool. I've always liked them

[@STOYNS]

What is the disk diameter on Camry , and is it bolt on?

[@TrichbeeT]

Mines are comming in tomorrow for my civic, hipe it all goes well woth this budget coilover set

[@GarageBuiltHondas]

Definitely, let me know how it goes!

[@TexasHondaChannel]

I actually love these coil overs they had decent ride comfort and do great on handling. I am gonna be getting me another set soon. I need to put some on this current civic. I have ran them before though. Glad you are doing videos people need to see. We need to collaborate some time. I’ll make a drive that way soon enough! Keep it up man love the content

[@GarageBuiltHondas]

Sounds like fun!

[@RX-8GT]

Awesome footage, I just ordered a set a few moments ago for my Rx8,supposedly the new set they have are better in quality seals and fluids,I hope so, I had to order since the previous coilovers the rear left showing signs of leakage the whole bottom half is covered in oil. (besides that it looks like it’s a different way to adjust height on it, doesn’t have that bottom collar ,I think to adjust it you got to take off bottom of coilover too spin it ,, odd because I never saw that style) and since I got the car I always felt like the car was leaning a little to the back left then I saw the tire was having way more wear than the other three, I was so close to getting the Godspeed ones but damn I rather pay less than half in stone that has more good than bad news.

[@freddyrosenberg9288]

7:19 the caster is off. Your front wheel is pushed back a good 3/4" It should be on the center of the wheel well.

[@GarageBuiltHondas]

Yup.

[@NGKGMR]

Ok you may not want to believe me but im saying the truth: Im 13 and my dad bought an 800€ opel Kadett c 2 door sedan 1974. It was and is my favourite car and he "gave it to me". I have been saving up my allowance for months and i want to lower the car and add bbs rs wheels. I think it will look good. This video is very helpful

[@GarageBuiltHondas]

Excellent, hope you enjoy it!

[@NGKGMR]

@@GarageBuiltHondas i have news. My bully knows that i love that car more than my life, and im scared not for myself but for Kermit (i gave it that name cause its green and it looks live a happy frog in the day) but i had 30 minutes sitting outside of my house looking at it. *I LOVE IT!*

[@GarageBuiltHondas]

Very cool, means you'll really enjoy it

[@NGKGMR]

@@GarageBuiltHondas i will enjoy it, thanks for this awesome video

[@edgardoarroyo7418]

any recent updates on these coilovers? Thinking lowering my honda Element 2005

[@leepalmer1075]

What size nut is needed for rear coilover lower control arms

[@GarageBuiltHondas]

M10 x 1.25.

[@Gone999]

I have these on my Integra it said Spacers required for Integras.......they weren’t needed after all they went in with no issues

[@GarageBuiltHondas]

Thanks for that feedback!

[@kohzor]

How do they drive man? I bought some after this review but I'm interested since I have an Integra too

[@Gone999]

d m their really stiff gotta take it slow on speedbumps but they are adjustable happy with height adjustment good overall for the price

[@guidosaur7506]

I have one of their turbos on my Miata with no problems

[@Touge_Monstro]

Jon, can you please review one of there turbos next? Please and thank you.

[@efboiz5302]

Which one? How many miles?

[@guidosaur7506]

@@efboiz5302 the sr20 clone of the t28. Maybe like 5k miles and 5 months?

[@GarageBuiltHondas]

I would love to! Maybe they'll work out something with me, that'd be excellent!

[@Tonysboat3]

Guidosaur I have one of their turbos on my landcruiser 50,000km now with no issues and looking into these exact coil overs for my accord.

[@saulpaz1834]

Nice .. so witch are stiffer none adjustable or adjustable coils ? Thanks

[@Jeremy_Hill_2020]

I recently bought Mostplus brand adjustable coilovers for my '96 corolla they came out to $295.54 the stock suspension (still installed) on my corolla feels sketchy cause its bouncy & specifically the rear driver side strut, it needs replacement asap but its my daily so I don't want it stiff as a rock or too soft so I basically want the perfect balance of stiffness & softness so the ride quality is smooth

[@wopino]

Awesome vid man, clean install and stance. Love the track footage

[@SuperMaxCarp]

Just stumbled across your channel. You got my sub. Keep up the good work. Its dope to see you and your dad bonding over cars and spending some quality time at the track.

[@subifudriftkings]

Mine. Same color coils. One Snapped after a year of use

[@subifudriftkings]

On a Subaru fyi

[@GarageBuiltHondas]

Thanks for the input!

[@xTheNameisEthan]

these were actually on my last miata when i got it, they were pretty shot and had cut springs so i cant really comment on how good they were lol

[@GarageBuiltHondas]

Lol

[@adriandarby9518]

I think you will find the adjustable valve is for rebound damping only and has nothing to do with compression stiffness, thats the springs job.

[@GarageBuiltHondas]

Correct. 👍

[@MrBluntash]

thinking of getting these for my ek hatch .. plan on keeping the car as a daily for another year or so.., just for stance purposes.... would you recommend so far??? PLEASE do an update video in the near future- not many people do! thanks

[@GarageBuiltHondas]

I do recommend. I cannot comment on lifespan though. I'm going to make another video on these sometime around Thanksgiving. Our last track event is the weekend before Thanksgiving then I'd like to take the coils off and see if any are leaking and how they have felt throughout the course of the season.

[@efboiz5302]

Both rears are leaking on mine with less than 1k miles, don't do it lol

[@GarageBuiltHondas]

I wonder what the deal was with yours. Sucks you got a terrible set.

[@andycandy7747]

Awesome video thank you. Great info👍

[@GarageBuiltHondas]

Glad it was helpful!

[@DionLiburd]

my question is how do they ride weight wise I want to put them on my daily but I like me the heavier set females so how is this Guna ride when I got a 300 pound passenger ?

[@RenovationsByHarris]

Are you getting any type of sping noise when turning at low speed cause i saw some videos they have to be greased before installing to avoid spring bind

[@GarageBuiltHondas]

Zero. And I track it which is much harder abuse than daily.

[@RenovationsByHarris]

Cool ty for quick reply

[@RenovationsByHarris]

What is you preload set at being they dont come with any type of spec sheets lol

[@ikemeffects]

Same setup I have on my CRX. been happy with them so far. Once I can AutoX, we will see how they do.

[@GarageBuiltHondas]

Keep me updated if you remember!

[@magno408_1]

How long you had yours installed

[@brunopt2406]

How are they holding up?

[@GarageBuiltHondas]

kzbin.info/www/bejne/gaSQf617jKmmfdk

[@ikemeffects]

Mine have been doing well. No leaks. Only thing is that the plated parts have been rusting. Iowa weather tho

[@thecrxsienthusiastguy5052]

Why yours are orange and the ones they show are Gray ? And would this set works for my 1990 honda crx si? Thank you sir hope you answer my question !

[@GarageBuiltHondas]

I believe I have an older style model since I was sent the set free. The link I provided in the description and comments has the set you'll need for your crx. I also have a coupon code there that they have provided!

[@thecrxsienthusiastguy5052]

Thank you sir and great video

[@GarageBuiltHondas]

@@thecrxsienthusiastguy5052 you're welcome!

[@rc121crx]

Exactly the answer I needed! I was on the site and the ones for the crx were grey and the one's shown on video here were like for other model hondas. Thanks

[@GarageBuiltHondas]

👍

[@poppynokc1977]

Super vid, very informative! I shall make my purchase now. 😁

[@GarageBuiltHondas]

👍

[@revsstuff1320]

I went D2 RS. After a lot of trial and error over the years with "ebay parts" I learned that generally you get what you pay for. Post up after some extended use, I'd be interested to see the long term performance.

[@GarageBuiltHondas]

Absolutely! I'll be making a video in November after the last track event and checking to see if any are leaking. Through 3 track events they are a-ok!

[@leslieymuthui6637]

Great video of exactly what i need the coilovers for Honda civic DX 1988 3door Hatchback DPFI 1.5l 1493cc. My rear lower control arm is OEM eye type but the coilovers are fork type, I think if i but the alloy control arms with bush will work.. Your input will be of great help.

[@GarageBuiltHondas]

Yes, you'll need lower arms for the fork style coils. You can get cheap aftermarket ones for like $50-100. You can buy these coils by searching for the ones that fit 92-95 Civic. Those work perfectly.

[@leslieymuthui6637]

@@GarageBuiltHondas Thanks man,i appreciate....

[@GarageBuiltHondas]

👍

[@kellywesley1977]

Cool update in November. Its going to be a while before I buy some. Because I gotta get my swap done First.

[@GarageBuiltHondas]

I'll let you how they do!!

[@monaxikoslykos4055]

Bro nice job you are another level kosei k1 and this sunspension are best choise. Keep going honda lover i hope to use a carbon hood 👍

[@GarageBuiltHondas]

Thanks buddy

[@micaiahflores1592]

awesome thanks for the review of these i have this set on my 96 corolla good to know they can take track abuse

[@GarageBuiltHondas]

You're welcome

[@edsal3317]

Do ef parts interchange da parts ? I want these for my 91 integra but I don’t know if they will fit I couldn’t find some that do only ef

[@GarageBuiltHondas]

Yes, they will fit perfectly

[@gqfilipino95]

Bought a set for my 08 TSX for my daily for a few months and car is not to low and rides like stock.

[@GarageBuiltHondas]

Thanks for that feedback Jonathan 👍

[@gqfilipino95]

@@GarageBuiltHondas no problem. These will go up in price like the Trueharts and Megan coilovers.

[@johnblackstone5261]

I'm getting some for my EF hatch

[@GarageBuiltHondas]

🙏👍

[@jakethepeasant]

I've got a set of these on my 4th gen ("EF") sedan and I'm not really happy with how they ride on the streets to be honest, super stiff and bouncy regardless of damping setting. Also two of the shocks were leaking out of the box and one had no fluid left in it so I had to pay to get two new bodies sent. I'm sure for track use they are fine but unless you live somewhere with super smooth roads I'd hesitate to recommend them for road use.

[@GarageBuiltHondas]

Thanks for the input. I'm going to try a set on my EF sedan soon too. Maybe it'll feel the same, hoping it doesn't.

[@mozel1991]

Hello What parts are made of aluminumand which are made of steel? Can you say that? check with a magnet? Greetings from Poland

[@GarageBuiltHondas]

Let me check this week!

[@MaXpeedingRods]

Hello dear, about coilovers, our most components are made from 6063 aluminum with T6 for increased hardness -- the advantages include excellent strength, and aluminum helps keep the weight down.

[@miker5748]

How do these coilovers ride compared to what you previously had on the car the truhart struts and what I think was tein lowering springs?

[@GarageBuiltHondas]

These are a lot stiffer. The old setup wasn't low enough for me and I personally don't like lowering springs because I like being able to set my own ride height.

[@AlexButler10]

excellent fair review, iv had teins, bc racing coilovers, meister R's and these, for street use they are great, soft as stock when u want them to and stiffer when you fancy the odd raceday. i also think they could use a stiffer spring for the track but for daily and street use they work really well, very much like a set of meister coilovers. and did anyone mention how damn cheap they are haha ,i paid 120 delivered >

[@GarageBuiltHondas]

Agree completely!

[@brentbalkaran2686]

From where? I see them for 200 on ebay. Thinking of getting some for my 240sx. So they are worth it for daily street and lowering use?

[@tukaruss8680]

I'm ordering set of coilovers for my e36 series 3

[@GarageBuiltHondas]

USE code GBH for 8% off

[@JP-ul2ni]

I hope these are worth it looks like they’ve gotten good feedback.

[@JohanGavieres]

thank you for such a great review. this helps me out on trying to find a nice coilover for my daily eg8

[@1skabroso]

DNA RULES en mi civic 91 no tiene Damper pero trabajan bien $350 _ 400 aprox.