Garmin Striker 4 Sonar Features

Watch as I show you the features of the Garmin Striker 4 fish finder in order to help you decide if the Striker 4 should be your next fish finder.
Learn and see the menu features to determine if this $100 fish finder is what you want and need for your boat or kayak.
---------------------------------------------------------------------------------------------------
Intro: 0:00
Overview: 1:15
Traditional Sonar: 1:32
Range: 1:50
Gain: 1:58
Frequency: 2:07
Zoom: 2:30
Overlays: 3:21
Setup: 3:49
Depth Line: 4:03
Scroll Speed: 4:30
Color Scheme: 4:52
Bottom Edge: 5:52
Fish Symbols: 6:14
A-Scope: 6:53
Flasher: 7:35
Split Frequency: 7:47
Sonar & Nav: 8:09
---------------------------------------------------------------------------------------------------
**Get your Garmin Striker 4 Here...CHEAP**
Garmin Striker 4- amzn.to/2K8qSZJ
Garmin Striker 4 Plus- amzn.to/2zlv5tu
Garmin Striker Vivid 4cv- amzn.to/3uqZ10x
Garmin Striker 4 ICE Fishing Bundle- amzn.to/3KTaBZj
Garmin Striker 4 Cover- amzn.to/2mSyztK
Garmin Striker 4 Plus & CV Cover- amzn.to/3netvya
Kayak Mounting:
1" Ram Light Duty Mount/Striker 4- amzn.to/3OXRBes
1" Ram Screw Ball W/ Bolt- amzn.to/370wtOZ
Garmin in Hull Foam Transducer Mount - amzn.to/3gUEiKy
Duct Seal- amzn.to/3nfJpsi
Power Your Striker 4:
Nocqua Pro Power Kit Battery 10.0 Ah: amzn.to/2KxqmsW
Nocqua 4.4 Ah Pro Power Kit: amzn.to/2IYFRqD
Nocqua Dual Port USB Adapter: amzn.to/2J21BSj
Nocqua Super Y Connector: amzn.to/2ZCi1HM
^ Above Are Associate Links ^

[@JackFilms99]

Just got a Striker 4 for Christmas and can't wait to get out with my kayak. Thank you for this instructional video-a lot easier to follow compared with the Garmin manual!

[@1Cast1Fish]

Glad the video helped...enjoy your new fishfinder and good luck on the water. Don't forget to Subscribe for future videos.

[@sicchuckie]

Thanks I like the fish with the depth, I think your the only review I’ve seen that showed what I’d been looking for.

[@1Cast1Fish]

That's awesome, I love seeing comments like this glad I could help

[@fishinwithjimgronaw6224]

Thanks, good info. I think this is my best sonar dual-purpose option for both kayak and then switching to ice fishing.

[@1Cast1Fish]

Definitely a great all around unit that performs very well for the price....can't go wrong

[@carterpmu]

Got a Striker 4 for Fathers Day. Only had it out once so far and am very impressed by the unit. I use it on a Old Town Next with the Garmin accessories bag and couldn’t be more pleased.

[@1Cast1Fish]

It sure is a great unit....especially for the price. Be sure to subscribe and check out some of my other Striker 4 videos

[@kevinhardin9115]

Vice vid. Just mounted mine yesterday. Played around with it for a few minutes and it was very user friendly. I've had other garmins that had the same features. The vid. Just made it a little easier. Thanks.

[@1Cast1Fish]

Glad it helped a bit...be sure to hit the subscribe button and check out my other Striker 4 videos

[@AZStolman]

Nicely done. Thank you! 1st time user, mine is just out of the box so I very much appreciate you adding your personal preferences.

[@1Cast1Fish]

Awesome...congrats on the new fish finder

[@andreasrydland5028]

Very helpful! Thank you for posting this!

[@1Cast1Fish]

Glad you found it helpful...thank you

[@ericgauthier2145]

Thanks for your video i bought a striker 4 and your video really help me whit my new fishing toy. Great and clear explications. Continue your great job

[@1Cast1Fish]

Thank you...hope you enjoy your fish finder and catch lots of fish...good luck

[@limemmohamed8529]

Im really fascinated by your videos, very clear and easy to understand. I will never hesitate to ask in case of any further information. Thnx))

[@1Cast1Fish]

Thank you

[@gregstabryla9945]

Have had mine out twice, watched before but now it makes sense. THANKS

[@1Cast1Fish]

Awesome to hear, hope you like it

[@silverback7659]

Excellent informational video! Merry Christmas!

[@1Cast1Fish]

Glad you enjoyed...Merry Christmas to you as well.

[@paulruiz501]

I’ve been looking for a video like this to turn on fish ID, thank you. Also I didn’t know about A scope, excited to play with mine once I get my battery hooked up!

[@1Cast1Fish]

That's awesome it always makes my day to read comments from people who these helped. If you have other questions feel free to ask and I will help if I can

[@reggiebasha7696]

Your video was helpful. I love my striker 4. Just installed it on my new kayak.

[@1Cast1Fish]

Glad you enjoyed...thanks for the Sub

[@casualcarolinafishing5835]

Good review. It's a good little unit. I used it pretty much all summer & fall. Just upgraded, but that was because I'm planning to hit the bigger lakes this year and wanted lake charts.

[@1Cast1Fish]

It is a great unit for anyone wanting a good (cheaper) fish finder for there kayak or boat. Good luck

[@jimmiemize1754]

Helped make my decision... wow,great for my Catch 100. Great information.

[@1Cast1Fish]

It really is a hard one to beat for $100

[@GSNCLN]

Nice review. Just installed mine on my kayak.

[@1Cast1Fish]

Awesome, hope it works great for you.

[@1Cast1Fish]

Waypoint & GPS video is 75% done....so be sure to subscribe and stay tuned....should be out in a week or so.

[@bigfan1364]

Great tutorial man, just bought mine at Bass Pro. I’ll use it on my kayak also. 😉

[@1Cast1Fish]

Congrats on the new fish finder and good luck

[@javierc.salazar512]

Thanks, great video very helpful.

[@1Cast1Fish]

You are welcome, glad you enjoyed and found it helpful...I have other Striker 4 video on the channel if your interested as well

[@FishTalesJ]

Great video. Thanks for the information. I just purchased mine today 😀

[@1Cast1Fish]

Hope you enjoy it!

[@allenfoster8859]

Great series of videos. I've had my Garmin Striker for about a year now and still wasn't sure of all the features.

[@1Cast1Fish]

Glad you enjoyed, be sure to check out the whole series of tutorials as they go in depth on the features.

[@mylittleyamahafxhofishingt4810]

Awesome thanks for these videos, Just subscribed

[@1Cast1Fish]

Awesome and thank you

[@MrRogain]

Thanks for the info. This is my first one ever and was having trouble reading it. 👍

[@1Cast1Fish]

Awesome...it makes me so happy to know this video helped someone

[@petewhite85]

Great instruction. Thank you.

[@1Cast1Fish]

Thank you

[@fishingwithnas3287]

Nice video man. Very informative!

[@1Cast1Fish]

Thank you, glad it was helpful

[@javierc.salazar512]

Thank you for the class.

[@1Cast1Fish]

Thanks so much,...glad it helped and you enjoyed....be sure to hit the subscribe button for future videos

[@tedcook187]

This is by far the most helpful video for getting started with the Garmin Striker 4. One minor thing. I believe you reversed the information on frequency. The 77 is going to give a wider view and the 200 a deeper and more clear, but narrower view.

[@1Cast1Fish]

Yes that was the case....77 is wide and 200 is narrow

[@surferbird]

I just love this KZbin it's better than a library anything you want to know it's right here. I bought mine a year ago works great but just use the depth finder that was it and I said let's look up KZbin and see if it will teach me the rest of the features and sure enough here you are explaining it all perfectly thank you I finally got my depth finder under control😎

[@surferbird]

Just one more question how waterproof is that Striker 4. I left my old Garmin out in the rain few times and the screen fogged up and stay that way I was wondering if these new Striker Force did that also

[@1Cast1Fish]

Thank you and glad you enjoy the videos...I have had mine out in the rain for a few with no issues, but it has never been left out or dunked in the water. Sorry I can not be much help on this one.

[@omnione12]

Best review for the product

[@1Cast1Fish]

That means a lot that you feel that way...glad you enjoyed. Be sure to subscribe, as I am working on the final editing of the GPS & Waypoint video right now...should be up on a day or two.

[@Yakheadfishing]

Thank you I needed this.

[@1Cast1Fish]

No problem, I am doing more and more of these types of videos so stay tuned or check out some I have already done.

[@rodelosrserioza3611]

@@1Cast1Fish how to research fish deepsea ocean using striker + 4??.

[@rickyrishel8198]

Explained well nice video ty

[@1Cast1Fish]

Glad you liked it! Thank You

[@keeganzpapa7290]

This is the type of video that should come with the unit when purchased. You have cleared up so many questions I have with my unit that I received last Christmas (the exact same unit) but have not had it on the water yet. I have been looking over a year for a video of this quality. Please come out with Part 2 soon. I fish from a canoe and have mine mounted like yours. Thanks again for such high quality and close up views.

[@1Cast1Fish]

Glad you enjoy and this video helped, Part #2 is planned for late spring when I break the kayak back out when water temps rise. I will be doing a similar video, but focused on the GPS/Waypoint features.

[@1Cast1Fish]

Part 2 is done kzbin.info/www/bejne/ZqPCdKuiYsZppas

[@michaelprevost1229]

Thanks i just bought one very helpfull

[@1Cast1Fish]

Glad you enjoyed and found this video useful...I hope to do the GPS segment soon

[@poa1947]

Thanks really helped me out

[@1Cast1Fish]

Glad it helped Thank you

[@dgalvan529]

Thanks for the video just subscribed!

[@1Cast1Fish]

Awesome, thank you!

[@farmerblackbaits2129]

Thanks, great teacher!!!!

[@1Cast1Fish]

Thank you! 😃

[@PapaSmurfx93]

Thank you for this video

[@1Cast1Fish]

Glad you enjoyed...I have done a few Striker 4 videos and have some more on the way

[@jaymacklin8303]

Great job

[@1Cast1Fish]

Jay Macklin thank you

[@americanescu]

Bro! You're great!

[@1Cast1Fish]

I appreciate that!

[@marksalter6569]

Love the videos..

[@1Cast1Fish]

Thank you

[@ThisIsAnglerTV]

Pretty neat tech!

[@1Cast1Fish]

ThisIsAnglerTV it is awesome for only about $100

[@ThisIsAnglerTV]

That's a pretty good deal!

[@toddramsay977]

Great Info on the Garmin features, one thing you missed or might not know. On the A-scope, if you look at the flasher it puts on the screen, look at the bottom and you will see a number. That number is the diameter of your beam at that depth. I helps me to know where the fish are in relation to my kayak. Thanks for Sharing

[@1Cast1Fish]

That is very true...check out this video kzbin.info/www/bejne/Y2imqJtuoZuYhdE I go into detail and discuss this very feature

[@toddramsay977]

@@1Cast1Fish tnx, I'll check it out.

[@Hankhaze22]

Just bought one for my new to me bass boat. Hope it puts me on some hard to find fish around here!

[@1Cast1Fish]

It will definitely be a big step in the right direction...it does amazingly well for it's price point....good luck

[@zacharyjohnson3052]

Seems like you’re right about the debris. it’s super sensitive. I watched this video and played with the features at the house and it picked up fish while on the trailer on land 😂

[@1Cast1Fish]

Yeah out of the water it will be way worse than in the water, but definitely still will give some false indications. But it is great for beginners and those wanting to start learning.

[@julianbell9221]

be careful not to let your transducer be on too long out the water. gets very warm and can get damaged

[@1Cast1Fish]

That is true but the Striker 4 is low power and heat is not a issue

[@kayakrexadventure2308]

Ok thank you so much

[@wensmith6752]

Thank you!

[@1Cast1Fish]

You are very welcome, glad you enjoyed

[@carlscott437]

One thing I wish you would just go over in your videos is the best ways of mounting the transducer to the Scotty 141 ARM, best way to do that.

[@1Cast1Fish]

I put it on the list of "To Do" videos for the future

[@petecorey1122]

Thanks for the info - how do you tell a rock bottom from soft bottom on this unit? Having trouble with that.

[@1Cast1Fish]

Honestly, I would recommend looking up other videos that explain the difference...I think that video or images would be the best teacher compared to me trying to put it into words. This is one of those things that are better shown....You did give me an idea for another video though...thanks

[@njoylife6527]

Thank you for this video! I have struggled with understanding and using my Striker 4. I do have one question for you @1Cast 1Fish I have had to reset back to my factory setting a couple times over the past year. Why does my depth on the top left blink constantly? Thanks

[@1Cast1Fish]

Could be a loose pin, but most likely something with the fish finder itself...it would be hard to figure out without seeing it honestly. I would check all the pins to be clean and check to make sure none are bent or loose.

[@joseantonioiniesta839]

Trdiciral español

[@PerrynBecky]

I just got the 4 plus. I'm hoping this will be close to the same as far as learning features. I don't know jack about this. Thanks for the videos.

[@1Cast1Fish]

Yep pretty much the same, only a real difference is the contour mapping...everything else should be about the same. Glad you found them useful, it always makes my day when I hear they helped someone

[@RonMTube]

Thanks for the review. Regarding beam width, isn’t 77 kHz low freq wide and 200 kHz high freq narrow?

[@1Cast1Fish]

Yes that is correct Looks like the picture is a bit off...good eye. I must say I am a bit embarrassed on mixing the colors.

[@cybeer67]

Thanks for your very informative video !!

[@1Cast1Fish]

Glad you enjoyed and be sure to check out my other Striker 4 videos that may interest you

[@nathanmagnusen7447]

How do you know which direction the screen is showing? I have never had a fish finder before, so this is all 100% new to me.

[@1Cast1Fish]

Info on the right is the freshest data, as the data moves left it is older.

[@victordeleonjr5386]

Dumb question, but how do you turn the volume up on the unit??

[@derrickaustin6052]

I have one question I did everything you explain and I got mines work good the only problem I have is after 5 or 10 min a add always pock back up with a man on a boat how can I get that to stop

[@1Cast1Fish]

Not sure I understand sorry....what do you mean a man on a boat?

[@jakeselke9930]

Hello, thinking about installing my transducer inside my hull. I see that’s want you have done as well. Did you upgrade to a through hull transducer or are you using the standard one? Thanks

[@1Cast1Fish]

Jake Selke no need to upgrade the standard one works perfectly

[@sl-jl3pz]

As I see how you are so helpful God bless u, just bought it and no Maps installed for my gbs that's matter 1, and the 2nd is no reading from the sonar on the 1st selection of the menu.. and finally power is on directly once i connect the battery cable. is my device has a problem or i do wrong ? thanks

[@1Cast1Fish]

Is the transducer cable attachment secure? If it is loose then the transducer will not work. If it is attached check to see if you hear a slight clicking noise from the transducer...this will tell you it is at least being powered.

[@sl-jl3pz]

@@1Cast1Fish well, I think its connected secure.. but the matter of no maps installed since I made a setup.. Is that meaning there are different settings I should add ? thanks

[@1Cast1Fish]

What version of Striker 4 do you have? The basic one has no map or contour lines...its just a straight GPS.

[@docbailey3265]

Listen to me: you rock.

[@1Cast1Fish]

You are to kind :)

[@jf30cp]

If I change some settings, then disconnect my battery for charging, will I need to go in and make the changes again or will it remember my settings

[@1Cast1Fish]

Yes it will

[@javierdeleon7597]

Just bought the Striker 4. Hopefully it'll help me out in the water 😅

[@1Cast1Fish]

Congrats and good luck out there :)

[@fatboyroy3977]

what is the adapter you used for the kayak track install?

[@1Cast1Fish]

The RAM-B-101-G4 (Light duty mount) is the model I have. You will also need a Yak attack 1" Ball mount to attach it to your rails. Be sure to hit the subscribe button...hope this helps

[@ronhughes5557]

see how small the numbers for depth are when split screen is used my Garmin the munbers are that size on any screen !! What's going on ???? any ideas thanks

[@1Cast1Fish]

I don't think you can change the size of the depths on the sides...sorry

[@BrendaGsDesigns]

droppping some love on your channel! xoxo

[@1Cast1Fish]

BrendaG's Designs thank you

[@terrancepeoples9326]

Is there a sensitivity adjustment on the striker 4?

[@1Cast1Fish]

Yes...they call it gain...check the description and hit the part on Gain...about 2 min mark or so....please be sure to hit that Subscribe button.

[@50chevydeluxe]

What transducer should I select for my boat? It's a 12 foot aluminum. 200/77 or 200/50khz? I am using a minn kota. And I have a transducer on the rear of my boat mount it.

[@1Cast1Fish]

200/77 for most normal fishing

[@garylaubscher4487]

Hi, I have a striker 4, it refuses to say the depth when i go fishing for Kob I am in about 6 feet deep water etc, and the depth fails to register and the screen in blank, is this because my sensitivy settings are wrong or is the unit faulty? Thanks, hope you can help.

[@1Cast1Fish]

Already replied :)

[@jakelauriente4149]

What setting should I use to make fish mine has not shown me a fish even though the guy right next to me is marking lots I’m looking for fish between 2 and 15 pounds

[@1Cast1Fish]

I would have to see a screen shot to see what your looking at, but I would first try to adjust the sensitivity up and see if that helps. How deep of water? Fresh or Salt?

[@johngrimes7510]

Should I have a fish finder for saltwater backcountry fishing? Water depth 10’ and less???

[@1Cast1Fish]

Without a doubt yes...but not for finding the fish so much as the ability to locate structure and then mark waypoints to find it to fish later. I have a ton of waypoints marked so I can come back to them with ease....and catch a ton of fish

[@xxgg]

Do you think ClearVU is worth paying extra for? Especially on Striker 4 series? Or not worth it due to smaller screen?

[@1Cast1Fish]

Stictly my own opinion, but I feel 4" is a bit small to take full advantage of Clear Vu. I have run down/side image on a 7" screen without issue.

[@robertvillafane3753]

This question my sound ignorant but I’m new to kayaking and I just got an fish finder. When I drop my anchor and sit standing still the bottom on the fish finder shows like I’m moving. Is this is normal?

[@1Cast1Fish]

Robert Villafane yes it is normal...it moves based on scroll speed you have set. The easy way to liok at it is the left screen stuff is data from the past sonar pings while the right is the newest pings. How fast the data moves off your screen is the scroll speed.

[@mattnash5159]

I think Roberts point is it appears even when sitting still that the transducer is gaining new ground when indeed it's not. Which makes me still wonder why is it still scanning/moving even though your anchored down? I've been wandering this myself..

[@briantongue1866]

How can I adjust my striker 4 to display or distinguish the thermocline?

[@1Cast1Fish]

First you need a thermocline, unlike most believe not every body of water has one. Now to find it if it is there, you must up your gain and adjust the noise reduction settings. You need to play around with it and adjust the gain up and noise reduction down. If there it will show as a line that looks like noise or debris in the water column.

[@KrucialFishing]

How do i get my screen back to 1 screen and not split screen? I have tried everything to get it off. Ive tried to reset it and all.

[@1Cast1Fish]

Go to the main menu , go to traditional sonar....should do it ….if not let me know...you may have changed something else.

[@calvinwynn198]

Thank you for this video. I did not see how you changed your fish symbols back to arches. I currently have fish symbols displayed and you are right it is showing tons of fish in four feet of clear water and I am seeing nothing. How do I get it back to arches? Thanks in advance.

[@calvinwynn198]

Never mind, I just watched your video on fish I.D. I am tracking now and understand what I was doing wrong...thanks for the video...

[@1Cast1Fish]

Glad you got it figured out and glad to see the video was helpful

[@Yakheadfishing]

I just bought this unit. I think the depth it shows is wrong. It said 50 foot. I dropped my line in and went down about 20 foot. Is there a way to correct this if its wrong?

[@1Cast1Fish]

Yes there is, but you normally only would correct for a foot or so...never would I recommend correcting for 20ft. I would verify the depth again just to be sure...if it is really off by 20ft or more I would return the unit as it is definitely not correct.

[@mustangsally0928]

How do you know which direction you are supposed to look while using your fish finder? My husband couldn't even tell me that. Some may think this is the dumbest question in fishing world but I am new to this. I seriously need to know. Ty in advance.

[@1Cast1Fish]

mustangsally0928 info on the right is the most recent data. The further data is to the left the older it is ie...you already passed the items in the return.

[@ppjolla]

thanks a lot. bought second hand and no manual. got a question i have the garmin striker 4dv is it ok to mount on hull?

[@1Cast1Fish]

Mine is not the DV model, I am not 100% sure If the DV will shoot good images through hull. The 2D sonar will work fine, but the down view sonar might have some issues, but I am not completely sure.

[@ppjolla]

when is part two coming out please....ie way point and how to use

[@1Cast1Fish]

Tokolosh I hope to get around to it soon...hopefully in the next month

[@ppjolla]

ok thank you :D

[@fishingalmanac7924]

I would like to see your garmin 4 part 2

[@1Cast1Fish]

Fishing Almanac Hope to get it done this spring

[@1Cast1Fish]

Part 2 is out FYI kzbin.info/www/bejne/ZqPCdKuiYsZppas

[@gillespitre513]

I'm confused, everywhere its mentioned that the 200 khz as a smaller area than the 77 khz?

[@1Cast1Fish]

You are correct the picture is wrong...its been adressed a few times in the comments...good eyes. You can check out my video on frequency for more info you may be interested in.

[@duanebowens1459]

Thanks that's cooladindagang.

[@1Cast1Fish]

Thank you

[@foxyrollouts]

is it worth saving more money and getting the echo map?

[@1Cast1Fish]

Foxy rollins depends on what your after as far as features...both are great units in my opinion...the Echo does have the better Mapping functions since lake charts are preloaded

[@thomasglandon5078]

will the transducer shoot thru the plastic hull ?

[@1Cast1Fish]

You bet it will....that's how I use it....check out my other video on mounting the transducer in hull for a great how to video

[@mikeblaze868]

How do you get rid off the red bar on top.. guessing u can not. It's just annoying with that and the yellow red ect . Just wondering cause some people say that do not have that problem.. but I looked here and other vidoes... it looks normal... but would live to get ride of it. Also sold red on the flasher also..

[@1Cast1Fish]

I got you covered man...go to your traditional sonar, hit menu, go to sonar set up, go to noise reject, go to surface noise and make sure it is off or in hide...should fix you up.

[@mikeblaze868]

I will try that in open water. I did try it last time out .. but the lake bottem went away to.. I'll try again. This will be my 3rd return. Both other units had other issues.. I will up date asap when I am out on lake for your viewes.. thanks man..

[@1Cast1Fish]

@@mikeblaze868 you may have the bottom locked as well if the bottom is dropping out over deeper water, as this would cause the sonar to only work in the set range.

[@kevinegger9646]

What mount do you have, and where did you get it? Thanks Kevin

[@1Cast1Fish]

In the description

[@gregarmijo8590]

I just got and put one on my boat. I’m still getting used to what the fish look like on the screen. Lol

[@brianloeffler4842]

Looking to find the best range and gain settings for a shallow marsh with a muck bottom never deeper than 8 ft ! suggestions ??

[@1Cast1Fish]

I would set my bottom at 10ft then and keep gain in AUTO unless you have tons of dirty water or debri...then start about 3/4 of the gain max and work it down till you clear up the screen to your likes

[@brianloeffler4842]

@@1Cast1Fish THANKS FOR THE HELP ! GOOD FISHING !!

[@1Cast1Fish]

You as well

[@azamzainuddin6151]

I want to know different function or something different striker 4 and ff250

[@1Cast1Fish]

I am not familiar with ff250

[@ethancampbell_535]

How do you get the way point to show the lake?

[@1Cast1Fish]

I assume you mean the lake contours? If so, the base models do not have this feature. The Plus and Vivid do have Quick Draw Maps which will map the lakes for you as you move about. If you want more detail and the lake fully mapped for you, you must find a fish finder that will accept a mapping SD card.

[@brentyoung7356]

It would be nice if one could just turn on the Striker 4 and go fishing. Quite often the fastest way to just go fishing is hit the factory reset.

[@GrandAngling]

do all the models have A-Scope??

[@1Cast1Fish]

The Striker series all have A-Scope

[@1Cast1Fish]

New video with waypoints & navigation is up...check it outkzbin.info/www/bejne/ZqPCdKuiYsZppas

[@ThoughtIwasFishin]

I have the Garmin striker 4 with clear view also. Do you know if this has water temp? Thanks for all your Garmin videos!

[@1Cast1Fish]

Yes all the Striker 4s will show water temp

[@ThoughtIwasFishin]

1Cast 1Fish I can't find it or figure out where to find it. Do any of your videos show this function?

[@1Cast1Fish]

@@ThoughtIwasFishin it should be in the upper left corner with the depth data...if not let me know as you may need to change some settings

[@ThoughtIwasFishin]

1Cast 1Fish I don't see it. I've downloaded the directions and have been using it for a year. Directions indicate water temp should be there. I love the Garmin but I don't think mine has water temp. My screen looks just like urs at 1:10. Depth, mph, voltage, and time. Thank you for the help.

[@1Cast1Fish]

Ok I think I know what you got going on...so follow these steps and let me know if it helped. Go to Traditional sonar...hit the menu button...go to overlay numbers....go down to water temp...put in Auto

[@jamesblackledge4009]

What mount are you using? Thanks

[@1Cast1Fish]

kzbin.info/www/bejne/jJrVaZqjYtKYh5Y Check this video out for all the gear I use to mount mine...links in the description.

[@arielflonasca85]

Is this ok for jigging,,200 meters depth?

[@1Cast1Fish]

Honestly if I was jigging 200 meters (600ft) I would want a much bigger screen and a higher powered Chirp Transducer. Yes this will work, but by no means will it be the best at that depth.

[@kayzeboyye]

What type of battery do you use

[@1Cast1Fish]

I use a Nocqua 10Ah battery.

[@heatherjones2007]

I am new to fishfinders,but I don't seem to find why I get streaks sometimes,diving at an angle bottom to top?any info

[@1Cast1Fish]

I hope to touch on this in another video, but I can tell you what you see is a good thing actually. If the fish stay within the cone (around your boat) then they will show as a straight line on the screen. The angle is because the fish is changing depths while in the cone. Hope this helps

[@1Cast1Fish]

Also check out my video on Fish Finders Explained

[@kayakrexadventure2308]

Hello from Greece I need to know if garmin strike 4 read the squid . Is a squid sezon and we need tutorials for that plz

[@1Cast1Fish]

Thanks for visiting the channel from Greece. I have to be honest with you, I have never fished for or seen a squid on sonar...so I am definitely not an expert on the subject. It's my understanding squid do not have swim bladders like fish which means they will have a very faint return when compared to fish. Will the Striker pick up squid ...I can not answer that question with 100% confidence.

[@kayakrexadventure2308]

If I find the way I will let you know

[@1Cast1Fish]

Sounds good...I am always intrested in learning something new

[@rafaelmenchaca7831]

Is this the striker 4 plus? Because my striker 4 doesnt have alot of these features.

[@1Cast1Fish]

This is the standard Striker 4

[@ferfernando950]

Thanks for the review man! I'm actually not decided yet between the striker 4 CV and the new striker 4 CV Plus version.. a bit more expensive but may be worth it? What do you think?

[@1Cast1Fish]

Really depends on your fishing style, needs, and budget. I did not need the special contour mapping the plus provides, because I use it on my kayak. However I would want the plus if it was for a boat or I planned to troll with my kayak. So if you have a need to see the contours of where you are fishing...get the plus, if not then get the standard...and buy some more tackle with the savings.

[@ShoreHomeSeller]

Fer Fernando n

[@shemmccoy6323]

Hello Sir, I have a question, what is the total depth on this fish finder ?

[@1Cast1Fish]

The manual says 1900 as a max depth in freshwater, but honestly I would say half that in real world setting