This Might Be My Favorite Obstacle Yet

[@ericr5299]

You could always add another hole on the right side of the ramp to interchange the raile to do front and back side tricks too.

[@GarrettGinner]

Yesss that’s a great idea

[@cloudoncloud9940]

@@GarrettGinner also if you have the space between the holes perfect you might get away unscrewing everything but one connection rotating it and THEN unscrewing the last hole. Might be easier to handle/ switch quickly ( does that make sense? so you can kinda pivot around the last screwed connection)

[@AdventuresInSkateboarding]

The lighting really makes a difference in the workshop. The footage is great. Awesome work. The modular system realy is rad.

[@Astrohhh]

I find this kind of stuff so interesting. I think it's so cool how you just take it upon yourself to build your own obstacles. Great video Garrett!

[@GarrettGinner]

Thank you!

[@trob9502]

That turned out sick!! I like the blue, it’s bright but it’s pretty cool! Keep killin it! I think the build and construction videos are my favorite. Side note: idk if it was just my audio but the audio seemed a little off in the video. Not complaining just figured I’d mention it.

[@brew1355]

Fill the exposed ends of the tube with expanding spray foam so wasps don’t build a nest inside the tube

[@Bigruck2k]

Been watching your videos for like 12 years now crazy to see how much youve grown over the years hands down favorite KZbin skater

[@Dyto69]

Hey Garrett, it makes me so happy to see how well you are doing. I loved the Episode with @offgridskater, that released on his channel yesterday. I started watching him a few weeks ago, and I was soo excited to see that cool crossover. Never expected it, but it was so much fun.

[@slimpickle47]

Really liked all the different camera angels around the shop when you were welding the legs. A neat small detail that added some cool depth to the vid. Nice bro 👌

[@SeanLewisMedia]

I have a feeling once summer rolls around we’re going to start seeing dirt jumps carved into yours hills for some Mtb action haha

[@silentry]

This is so sick. The possibilities are endless.

[@GarrettGinner]

Right? Opens up so many ideas

[@The_G_in_Jesus]

I had pc troubles this morning and I paused the video halfway through to cool off 😂 I hope that doesn't show up on your stats because I'm loving it ❤

[@magicwood2360]

Rad to watch the evolution unfold 🔥

[@robbmr9938]

Mean brother, that looks awesome ! Well done cuzz

[@rollingon4673]

I'm glad you went 6 instead of 8ft. My opinion...sick bro

[@BIG0100]

This Channel quickly became the vibes for when so many youtube channels that fell off this past couple of years it felt like! Enjoying all the types of content, so sick dude!

[@ryanrowe1975]

Congratulations!

[@y0n3t]

you should make a super wide square rail; like a ledge attachment . that would be sick

[@philadelphiabornandraised]

You missed the opportunity to make a 12 inch GG logo and the foot base vs the star . Would look cool and be very stable

[@BillSkatez]

Let your hair grow, I DARE YOU.

[@GarrettGinner]

Oh, you don’t want that

[@Itsnotme12332]

​@@GarrettGinner i think we might😂

[@vitordecastro9018]

@@GarrettGinnerdoggy dare ya . 😮

[@fernandoreyes680]

​@@GarrettGinner bring back the fro you had in like 2014 lol

[@Dave3rdEyeArt]

Grow it super long, beard too..your Sasquatch phase​@@GarrettGinner

[@currentwavess]

i binged watched the past month of uploads now i feel like i am really into your projects and schedule lol i love when you finish a project! was thinking about the fire pit last night, looking forward to see it completed too!

[@Dennisdays]

Sooo sick! It came out great!! 👌

[@GarrettGinner]

Thank you!!

[@BroMorris0341]

Dope! ....And the "Star of Garrett" touch.....*Chef's kiss

[@GarrettGinner]

Star of Garrett is crazy 😂😂

[@WhatisReal11]

invite the dern bros for a full on session video

[@mattmauro1623]

Give my man 1 mil subs already! I been watching since 2015

[@GarrettGinner]

Appreciate you!

[@AviweMbiyo-pz3sv]

Try to connect the blue rali and the purple rail. That would be mad 🔥🔥

[@brendenschultz1628]

Man, really cool to see this coming along so well. I remember when you were afraid to touch the bump to bar project at all, lol. Looks great man.

[@ColemanRobbins-nv5eq]

I’ve found marking things in triangles (ie…^)gets more accurate results than lines(: love the vids Garrett I’m a fellow welder and Shop Supervisor at a wood and metal shop at a University

[@JustDrac]

Sick video as always love the rail color choice

[@casteliero]

It’s weird to think that first time I saw your content was 34 years ago in Home Alone. You were amazing as a Marv. Exeptional role.

[@GarrettGinner]

This made me laugh out loud hahahahaha

[@enriquemarquez2328]

360 flip blunt slide 🤟🏻🤟🏻🤟🏻

[@InsaneTrickshottin]

You gotta make another one exactly like this, ad another insert on the ramp, and then you can do frontside and backside!!!! 😮😮

[@djman_177]

Brooooo!!!! U need some homies over to skate the 2 rails with to seal the deal!!!!! But fantastic work in crying becuz I’m proud of my skate homie 🤙🏽💪🏾👊🏽

[@johnurzi]

Came out sick! Congratulations.

[@Sxlfb]

Live it ❤

[@elinb]

So cool!

[@BIG0100]

Super awesome! Love the shop!

[@Bustin619]

bro I was dying at the montage of welding positions, and you kicking the bump to bar rail into the box 😅

[@BIG0100]

That looks like so much fun!!!!!!!!!!!

[@leongeyer7198]

A pole jam rail would be sick too

[@kickflipsk8r489]

i just had a thought, now that you have that rail and if you do want it a bit of a longer grind you can add a sleeve splice after that and just attach and extension rail.

[@Dubleduhtch]

Garret you should make a rounded cap for the end of the rails so it’s not just a hole. Another aesthetic challenge tbh

[@Dubleduhtch]

Aesthetic and fabrication challenge

[@cyclopsentertainment517]

Honestly I feel like it wouldn't really look that great and it would make a lip that you could get caught on

[@bcoyne12345]

@@cyclopsentertainment517 he already used that method for the 30 foot rail, you grind the weld smooth to remove any lip

[@Gronds-n3p]

If you end up doing the long rail (please do) you should make it go down the kicker too so you can go up and across

[@maximeraymond2446]

If you want to add extension to this you could do it by merging another bar using the smaller diameter tubing as a bond.

[@chasekapp9433]

The star is so sick

[@splats6421]

Garrett you should add a cap for the hole that isnt covered so that nothing gets in there

[@stephanjuvik6266]

This one's for that third leg that goes all the way down to the ground!

[@DavidDieringer93]

i look forward to your vid's love your content

[@GarrettGinner]

Thanks for watching!

[@aobdelisle]

That rail ended up being so sick. Feels like you made it without much struggle too

[@famousgoldentouch]

15:20 the easier solution would have been to orientate on the T feet those flat rails have so their don’t wiggle … but I guess the star works too ;)

[@tylerhardie3343]

You should make.the ranger your home tuck for hauling things from the house to the garage like the generator if you could find a tray cover for it be a bonus can just keep.that stuff in it like a portable work station?

[@alexandersofteland]

If you use the same concept for the feet but just push it into the ground you could also make snowboard rails. Just add a longer foot where the tube goes into the other tube🤷🏼‍♂️

[@mack-i4e]

w vid I love see you progress

[@Maxhavlish1]

WoW Gnome @ 3:03

[@Frontside_Hurricane]

You could 100% put mounts on the other side and open it up for backside tricks too. 🤘

[@GarrettGinner]

That’s a good idea!

[@LetsrideJ]

could put a sleeved rail inside with a extra leg, and have a Extendo Rail! you'd likely want the bar and gusset feet to prevent twisting on that piece.

[@EthansCollinsMedia]

Should make a bar that slips into that one in order to extend it as you mentioned, similar to how fitted the feet - then you can chop & change. Your own Lego set of interchangable rails

[@Hellavit]

Gotta love Garrett’s love for his third leg

[@Category-G-Akrid]

Keep a little pocket sized book to write down all your different setup procedures for your machines. You can write down cut condition and other settings that you can always reference

[@GarrettGinner]

I’ve honestly been meaning to do this for a while but keep procrastinating. I really need to do it

[@oldgregg86.]

You need an extra hole on the top of the box so you can skate it frontside and backside.

[@HANZmoto152]

such a dope rail. nice job man

[@GarrettGinner]

Thank you!

[@TheNamesMisfit]

Also the Vulcan is awesome. I do all my welding for AutoBody work. Its a beast for a harbor freight welder.

[@GarrettGinner]

Right? People bash on HF but everything I’ve bought from there is more than capable for all my hobby level stuff

[@billm.8592]

Pole jam rainbow rail on the box gotta be next

[@elivadnais]

Add 1 more hole in the 4th corner so you can switch the sides the rail can go on

[@breydonbentley_28]

Im here for the 3rd leg.

[@granthanifen1143]

So sick

[@PapiPisani]

bro this is sickkk long one next

[@15digitlongname]

bro, adding a ride off downrail attachment to the long rail would be sick

[@joeypowers5636]

5:52 me when I’m a Costco guy

[@c1dtl39]

The 3rd leg base looks like Maggie Simpson’s head lol

[@TheGoProDad]

I’ve been waiting for this to drop. And insurance won’t care as long as no one narcs 👀

[@AlwaysIllBlood]

If you could make an extension for that rail that you can attach and remove with some sort of latch on the underside, that would be sick.

[@Straub_Customs]

Plug weld would be the strongest way. But it turned out great.

[@lax2dia101]

You need o ring bushings for your hose..Rubber washers

[@famousgoldentouch]

If you wanna give me a little cut ;) I have an idea for Garrett Ginner the metal worker merch: „… it makes sense in my head“ plus your logo 😅👍👌

[@seth_capaldi]

You might actually be able to make that rail from the top of the drive way going all the way down now. Understandably the cost for such a rail may or may not be financially feasible I don't know, but with some tube and the correct wire I think you could make such a rail now that you have a lot more experience.

[@LinusWack]

Do please Kickflip Front bord

[@moneybagskt3807]

When I first saw it on insta I thought the star was a snowflake wit the light blue!

[@GarrettGinner]

Damn that woulda been even cooler

[@CricketLegz__]

Garrett, I'm omw to skate with you. I'm stranded in a winter wonderland and the only dry spots are covered in salt. I'll bring my own toothpaste and I'll sleep on the mini 😂

[@GarrettGinner]

😂😂😂

[@Dave_Jenkins]

Sick!

[@GarrettGinner]

Thank you!

[@cherryberry6985]

So I am shoe gooing my snow bord boot .

[@rollingon4673]

Do a down rail next

[@riperdaddiecentral]

The color and shape of the base of the new rail reminds me of Rick and Morty

[@tylerhardie3343]

You could even just add a sleeved section for more length

[@mikeferland9185]

I think a hard flip lip slide would be doable or a kick flip blunt

[@BillSkatez]

I'm curious about how fusion works. Maybe do a small segment on it and ur workflow.

[@GarrettGinner]

Honestly, so am I 😂 I have SUCH an entry level understanding of it that I need to get better before I even think about trying to explain my workflow hahaha

[@lukeegner4272]

You should make some ninja stars with the plasma cutter

[@whaggtv]

Is it possible to store the rail pieces under the obstacle

[@IvanHernandez-qe1os]

Didnt think i would enjoy hearing garrett talk about his third leg so much

[@GarrettGinner]

Hahahahahahahhahahaha

[@lopwidth7343]

Amazing job dude. Id say skills all ready for roll cage and whatever needs work on your 240sx and your grandpas truck. Id love to daily drive that truck wherever and build my own closed top for it or something. How much are you allowed to modify a vehicle over in USA to pass MOT and be road legal?

[@aydennavarro3739]

Im curious, what paint do uou use for your rails bc the paint i use sticks no matter how much wax i use. Maybe im using too much but idk

[@brandonkiebles4501]

At the airport with a 6 hour layover over you made it bearable

[@GarrettGinner]

Hahahaha enjoy and safe travels!

[@FPSaddiction]

❤

[@JesseMcLanahan]

Grind a little chamfer into the outer tube when doing the inserts to give you a little extra room and better penetration with the weld. When marking the legs how you did add lines going across € to make sure things line up better. And you can also do one line on one side, two lines on the other to differentiate direction. Then three and four for the next leg etc if that makes sense lol. Otherwise loving the fabrication content. Maybe throw some wd40 on the inserts on both ends to prevent some rust and add a bit of lunrication. And if/ when you make a longer rail have it slight down.

[@A-track89]

Down kink rail extension next?

[@GarrettGinner]

👀👀👀

[@BeardoTheWeirdo]

a grinder and paint makes me the welder I aint

[@GarrettGinner]

Facts 😂😂

[@sixpathsskate9736]

Make a pole jam

[@the_mayor_of_space]

Remember to buy some wire

[@brayanncs]

adhd makes you keep forgetting stuff, i'm just like that!

[@alex_tides]

I could be cooked, but couldn't you also make an extension for the new rail that has a tip that slides into it? Just another rail with two legs that is small enough on one end to fit inside the blue rail?