FAQ's: "What type of glue do you use?" I use Titebond Type II Dark Wood Glue. It's the same as the regular Type II, but dyed to dry a dark caramel color. I think this might be the best choice for exotic hardwoods since they tend to be darker than most domestics. "What type of finish do you use?" I use Salad Bowl Finish, which is not only non-toxic, but food-safe as well. In conjunction with that, I try to sand up to 600 grit whenever possible, which will give you a better finish. "What about using [some type of wood] as a bowl instead of Cherrywood or Briar?" I take my technical cues from the tobacco pipe industry, and Briar is king with Cherrywood being second. Aside from Cherrywood, I also use Gaboon Ebony occasionally, but that's it. I don't currently have personal experience with any other type of wood for bowls. Check out this link for acceptable alternative woods to use as bowls: pipedia.org/wiki/Alternative_Woods_Used_For_Pipe_making "How do you clean a wooden pipe?" With a pipe cleaner, of course! If you'd like to harvest resin, you can do that with paper clips and such so long as you're careful not to dig into the wood; that would give you splinters in your resin, and that's no fun. I *DO NOT* recommend digging around the bowl for resin as this might disturb the "char layer" (the burned interior of the bowl) which is essential to a prolonging the lifespan of your pipe. "Where do you get your wood?" I've been getting it from Woodcraft.com, but I think I'll go through www.bellforestproducts.com/ the next time I get wood. Bell Forrest seems to have better prices.
@Th3Class1c6 жыл бұрын
Hey gary I have a very important question. Could you make a pipe out of a standard piece of 2x4?
What are your thoughts on bone as a bowl/stem material?
@dawncheriewoodworth34494 жыл бұрын
@@Th3Class1c that wouldn't be a terrible idea. Pine is a very soft wood so it wouldn't be durable enough. And pine resin is very flammable. I make shavings of pine to start my campfires. Not to mention pine is very often treated with chemicals. Horrible for the lungs.
@anubispup47604 жыл бұрын
@@stanervin6108 I've done that. I wouldn't reccomend by way of breathing in bone dust or the burning bond itselt since bone tends to be pretty brittle. Antler isn't a bad choice however for a stem but not the bowl.
@NarlepoaxIII7 жыл бұрын
At first, I wondered why you would make a carb pipe for tobacco smoking. Then I realized...
@GarysWares7 жыл бұрын
+NarlepoaxIII Word. Well spotted.
@williamrobinson64126 жыл бұрын
NarlepoaxIII around 4:50 notice the pill bottle....I do the same lol.
@williamrobinson64126 жыл бұрын
Gary Harmon I just made a pipe out of elk antler now to just get it finished. So far it looks awesome for my first attempt at it, on a random spur of the moment "let's make something idea".
@carlmanx16806 жыл бұрын
Lol yup !!!
@BlaireSnorlax6 жыл бұрын
Perfectly legal tobacco, mate.
@bobcanish4 жыл бұрын
THANK YOU for this wonderful video. I have made a mini pill bottle pipe and a mini carb pipe so far. What I love is how you teach the basic concepts that make a good pipe, and then the few designs. There is so much room for creativity and improvising, but the sketch with dimensions was great to get me started.
@LAIDBACKMANNER7 жыл бұрын
I'm just getting into woodworking. This was very informative and to the point. Jam on man!
@GarysWares7 жыл бұрын
+LAIDBACKMANNER Awesome! Glad I could help!
@samandria4 жыл бұрын
Thank you for this! I started making pipes specifically for cannabis, it is a lot harder to find good videos that are not focused on tobacco.
@vendusmortem14334 жыл бұрын
"For the other pipes i made." lol This is a great video. Appreciate the info and the wisdom this man provides. Good job.
@floridadad28177 ай бұрын
Appreciate the info on alternative woods. We have a farm where all the white oak and iron oak is getting harvested to make way for black walnut. Plenty of stumps to get material from for a while.
@alexiusgottsgamechannel52432 жыл бұрын
First time seen it and the intro captivated me right away.
@BlaireSnorlax6 жыл бұрын
Great channel for a smoker like me. Thanks for showing me all this, wouldn't have known about wood selection and such before now.
@gklein405411 ай бұрын
I have Ben making pipes for 12 years, been very fortunate to have gained guidance from Shultie, Tinsky, West, Marshbanks, and emails with Renee Barbie. You have a solid foundational video, looking forward to your continued success. Ps: Oak is a NO! Release toxins
@douglaswages7022 жыл бұрын
I don't have a "laser" sight on my drill... But it came with "laser focus". Lol, been smoking watching your vid. It's awesome
@53jed Жыл бұрын
It's a box core edge trim router bit, for routing concave decorative edges on stuff. The stem is just a guide. I think you'll find the hole it makes is wider than it is deep - by half the width of the stem. So there.
@PangatStore3 жыл бұрын
Saya suka dengan tutorial pembuatan pipe cangklong. Salam dari indonesia.
@richardblunts59537 жыл бұрын
Its been a long time since ive seen a video that ive liked so much that i couldnt stop watching it. keep up the good work loved the video
@GarysWares7 жыл бұрын
+TTM Coy Well thanks for the compliment! I don't quite know what I'm doing, but I'll keep it up!
@morganpeace6867 Жыл бұрын
Great video! Much appreciated!
@croz1og621 Жыл бұрын
thank you, this video was very helpful
@hateyou10946 жыл бұрын
The best video I've seen. Great work.
@SpiritualAtheist2 жыл бұрын
Great video! Exactly what I was looking for. 👍👍👍
@newmanr06236 жыл бұрын
I'm 30 seconds in and like this dude already
@josephcoonrod46637 жыл бұрын
Video was great. Reading comment was good time also! Been wanting to make one, video was helpful.
@GarysWares7 жыл бұрын
+Joseph Coonrod Thanks! Good luck with your own pipes!
@williamspetter28235 жыл бұрын
I remember doing something like this with a one piece construction using only a pocket knife and a screwdriver as a hand drill it was brutal work but that made the pipe even more special tbh wish I still had it though :( it got lost some time ago
@williamspetter28235 жыл бұрын
It hit superb too 👌 man I need to do that again
@gregoryhare65385 жыл бұрын
Hay Gary i like the way you make your pipes I'm a pipe person and i like to at lest try and make one or two but i like to thank you for putting it on you tude so cool.
@kevinuzzo56642 жыл бұрын
great video man! I am a beginner having done just two pipes and doing my first chillum,but watching your video a doubt came to my mind.is it stupid to make the piece that keeps the material from falling a bit concave? I never saw one like that and I would try to make it like that.
@bomyers53453 жыл бұрын
What size Brad point bit did you use?
@calebevans36903 жыл бұрын
great video. would it be possible to get a list of woods you've used that are fine, and woods that are a definite no go
@jondoes82224 жыл бұрын
Is pear wood ok to make a pipe?I have some ornamental pear wood which the tree does not have pears but is mostly a lawn tree with nice blooms..Please let me know. Thanks
@stro3822 жыл бұрын
Takes me back to highschool in 89 woodworking class😵
@bikerbrandon18 ай бұрын
I'm making my first pipe and I'm using sapele and my stem would be maple. Are these ok to use?
@HillbillyMcWilly4 жыл бұрын
Came here to learn a new technique to turn pipes on a lathe , what I found was how to make weed bowls..... Was not disappointed.
@StoneDigital6 жыл бұрын
I wish I would have watched this yesterday before I used my forsner bits! So informative and I feel way more confident now!! Thank you!! Do you have Instagram, Gary?
@ezioauditore88373 жыл бұрын
I love how he uses pill bottles as reference
@brandonsides45892 жыл бұрын
What size blanks do you buy for your chamber pipes?
@christoffer39494 жыл бұрын
The best thing about Heroquest is confusing spices!
@ProSimples6 жыл бұрын
I subscribed straight away.
@keales95644 жыл бұрын
Awesome video,thank you. Can you use Teak wood for a pipe?
@dantesgivemeablowjobplease2 жыл бұрын
love the intro
@kennethfisher70133 жыл бұрын
love the music
@BobBlarneystone4 жыл бұрын
the last bit was not a core box bit. it was a cove bit often used for rule joints on dropleaf tables.
@gemmaster93695 жыл бұрын
Hi Gary, can we used resin stabilised wood/timber to make pipe?? Or, is it gonna be unhealthy? If we can use, what kind of resin is OK? Water base or oil base resin?? Love you mate...
@JoewagoRose4 жыл бұрын
You can absolutely make your own bowl bits if you don't wanna shell out the cash for one. If you have a grinder, you can take a spade bit and grind it nice and round. I ground a 3/4" (I think it's technically a spoon bit?) out of a garage sale spade and it kicks ass
@JoewagoRose4 жыл бұрын
Leave a little bit of the original tip on there too and you get your bowl and your drought on the same shot!
@mikec38209 ай бұрын
ever do wood dab rigs? got to love the internet lol
@KoopsTech3 жыл бұрын
Has anyone found an alternative for the router bit for drilling the bowls? It looks like dremel doesn’t make them anymore :/
@OnlyKlamath3 жыл бұрын
can you have a pipe made out of peltogyne wood? thats the only wood i know thats that color. and if not any suggestions?
@Reisor_HoundHunting6 жыл бұрын
Bad ass video man really enjoyed it
@briansworld71534 жыл бұрын
Hello Sir! Loved the video. I have subscribed to your channel. Thank you very much for sharing! Greetings! Brian
@paulkoester43545 жыл бұрын
It's beautiful watching these cigars being made so cool
@jacktapper72905 жыл бұрын
That bit u used is a 1/4 round router bit.
@MrSeebobski5 жыл бұрын
1st right answer seen! Others with it's a pilot is too but try to find one as a pilot drill bit would be hard.
@benallen46336 жыл бұрын
Did you use a torch lighter on that briar pipe? That would explain the hole..
@oldironsfury2 жыл бұрын
Now what about apple wood ? I have a few apple trees on my property Thank you for the video ! 👍👍
@lynchie360 Жыл бұрын
Hey, would basswood be OK?
@alanprobert76084 жыл бұрын
Is Sycamore OK for pipe making as it's part of the maple family
@jakqup5 жыл бұрын
youtube; hey, look at this me: WTF, this film is fucking awesome! I have to make new pipe.
@treg.21896 жыл бұрын
Can you coat a pipe that's made of say cedar so it won't be toxic to smoke out of? Reason I'm asking is because I already had a cedar pipe carved before I knew you shouldn't smoke out of it
@justinporter97434 жыл бұрын
I loved the video and am now interested in making one but I have a question about the wood, I have these hickory wood chunks that claim to be 100% natural and are for smoking food, I’m interested if you have any input about this, they sell cherry hickory and many other hard woods in chunks about the right size to make the pipe and are fairly cheap, curious if you have any quarrels against using them and if so where you would recommend to actually find the wood
@arabohonarchian82826 жыл бұрын
Hi I start making Briar pipes about 3 years ago for myself and after polishing and waxing it turns shiny it looks awesome but after smoking it once or twice it turns to matte finish do you know what should I do to keep it shiny like the pipes you purchase it from shop I use Carnauba wax do I need to use other kind of wax or finish?
@Christophersanchez13265 жыл бұрын
How about cleaning the chamber pipes air holes? I bet mesquite wood can be used for pipes!
@Christophersanchez13265 жыл бұрын
Dummy it was right there on his tablet mesquite wood...😯
@bobbuurman15555 жыл бұрын
Gary, how about forming and inserting light gauge brass, copper or tin for bowl interior? Yes it adds slightly to input cost but also could be life long pipe for high temps..
@stanervin61084 жыл бұрын
DO NOT USE BRASS (lead) or tin (tinner's migraine). Copper should be all right if it pure Cu .
@bodhievel95037 жыл бұрын
such a rad dude! Id love to meet you someday!
@nickheigl37195 жыл бұрын
good video btw
@shantaymadison55816 жыл бұрын
You can find something like this on the Avasva page. Full step-by-step instructions right on your desk.
@lucaswhitaker76105 жыл бұрын
like the video man, keep it up!..oh and have to say i enjoyed your intro as well lol..
@packthebagpiper53825 жыл бұрын
Hey Gary, great tips here. Where do you find the best prices for cherry wood blocks?
@paolozanetti48775 жыл бұрын
che tipi di legno si possono usare x le pipe???
@AJ-od7mv3 жыл бұрын
Would Brazilian Walnut be an acceptable wood to make a pipe?.. I mean as far as toxicity? I'm clueless on the matter.
@reborn19665 жыл бұрын
Hey, I used wooden glue to connect the two pieces of the pipe. Online I readed that the inhaling of wooden glue is toxic. Does anyone know or this counts by this pipe? Or is there no problem? Thx
@GarysWares5 жыл бұрын
Glue releases toxic fumes when exposed to too much heat, so you can’t use glue in the bowl. However, so long as the glue is far enough away from heat, it won’t have an effect.
@willcharles34194 жыл бұрын
It's not long term toxic, it only takes a hit to release toxins in your lungs and blood. It will cause severe damage to your liver and your brain. Be hella careful
@PuluCeeBagumba5 жыл бұрын
Nice work Stoney! What size bit are you using for the air passage hole? 1/8”? ...or bigger?
@GarysWares5 жыл бұрын
Thanks! I used an 1/8” bit in the video, but you can use 3/16” without there being a problem. Much bigger than that and I don’t think the pipe would have a tight enough airflow to work efficiently.
@chrisconlon79705 жыл бұрын
21:39 I really would have used that knot in the pipe. Tougher wood for a start but I think it would make a great feature.
@YUNGFARANG5 жыл бұрын
Your a legend
@puddinpie98625 жыл бұрын
you sound like Dr. Nick from the Simpsons
@stevenedwards44704 жыл бұрын
We would've been friends in high school. The really niche section of Physics Club.
@matthewlogston56365 жыл бұрын
Try walnut rootball
@joshuagillard70117 жыл бұрын
I have that same stencil.
@GarysWares7 жыл бұрын
+Joshua Gillard 😀
@apoccooking43646 жыл бұрын
Dumb question but, my dad recently quit smoking and I'd planned to make a pipe for him for Father's Day. So I was wondering, if someone made a pipe and gave it a beeswax finish, would it work as a bubble pipe? He's a silly guy so I think he'd get a kick out of it but if it's not going to work I can put my money to something else for him.
@dustinchambers41725 жыл бұрын
Is pine a bad wood to use? I just have an abundance of pine trees around my house and would be convenient...
@GarysWares5 жыл бұрын
Yes, Pine and other softwoods are poor choices for the bowl. Check the pinned comment on this vid for the whole story: kzbin.info/www/bejne/Z5-lh55pgL50fsU
@willodell-g1y Жыл бұрын
What happened with the zebra wood pipe 😢
@learnandmake99873 жыл бұрын
ممتاز
@shawndoe38067 жыл бұрын
Why wouldn't you start your hole with a normal bit? Then finish it with the round? And I made a pipe out of ash, will it kill me?
@billdemudd66974 жыл бұрын
Why's that baccy green,dude?
@rwkeeton5 жыл бұрын
are you a wizard?
@GarysWares5 жыл бұрын
Part-time.
@jjlilskiprecords5 жыл бұрын
Lmfao how high are you to put the mouth piece on the wrong side?! but this is very cool thanks for sharing i want to try this now!
@uki9767 жыл бұрын
Young Gandalf!
@Bobilongcox7 жыл бұрын
No offense but this is the exact guy I would think makes pipes
@GarysWares7 жыл бұрын
+Mike Hunt Haha! Your comment just made my morning! The aesthetic I shoot for is "wizard" and wizards definitely make their own pipes and vend them to make ends meet, amongst other things. I'm living the dream/delusion!
@devinpetersen23877 жыл бұрын
something tells me these pipes aren't meant for tobacco use
@BlaireSnorlax6 жыл бұрын
Devin Petersen shhhhh, child.
@haisanong17096 жыл бұрын
Weed pipe base on the design :)
@surveysays83356 жыл бұрын
Yeah, I came to see pipe making, and I see bowl making.
@kaptein12476 жыл бұрын
Devin Petersen, shhhh...
@scottywhitis62155 жыл бұрын
Devin Petersen lol
@allenhanford5 жыл бұрын
I'm really impressed that you were able to make this video while stoned out of your gourd
@GarysWares5 жыл бұрын
I am man of many talents. /bow
@brownietheking33976 жыл бұрын
Nice green tobacco that's my fave to hahahaba
@janieblair34445 жыл бұрын
Whacky tobaccy
@peterhans7925 жыл бұрын
@@janieblair3444 i see you have been around looking
@cowchips45505 жыл бұрын
That 'ol wacky tobacky
@amyllari52745 жыл бұрын
Well that tobacco must have gotten to your brain because it's spelled "too"
@goodfella16054 жыл бұрын
Way better than tabaco. Feels better and it's better for you
@Breadstank7 жыл бұрын
dude you're fucking awesome
@GarysWares7 жыл бұрын
+Sneak Well thanks a bunch!
@cloud_monkey4225 жыл бұрын
Either I’m high or this dude is the stoner version of Alton brown lol
@skottlee89594 жыл бұрын
Why not both?
@cloud_monkey4224 жыл бұрын
Skott Lee well at this very moment it is both lol
@SlyBlu74 жыл бұрын
yes.
@cloud_monkey4224 жыл бұрын
Tyler Stone lol
@overlordghs10816 жыл бұрын
he's got green in that pipe LOL someone's doing this right at least
@Northanstein5 жыл бұрын
Made one with a machete, a nail, a hammer and a saw
@bleachbunnybitchx94334 жыл бұрын
Cool
@glhf43097 жыл бұрын
i love everything about this video
@GarysWares7 жыл бұрын
+GL HF 😀
@TheMaddGodd7 жыл бұрын
This should have more views. very well made, presentation and all. props to you man!
@GarysWares7 жыл бұрын
+TheMaddGodd 😊Much thanks! I got some more vids in the works so keep an eye out.
@deadpandue79867 жыл бұрын
Gary's Wares great video I'm really curious on how your going to do that rotten cherry pipe please keep us post on that
@GarysWares7 жыл бұрын
+Trevor Williamson Thanks, and yeah, I'll post something. Although, the blank isn't rotten. That's a really big naturally occurring knot; it's usually the place on the tree where a branch starts growing. I love stuff like that. The pipe I'm going to make out of that blank is *hopefully* going to be sold to a tobacco shop. As such, it's got to be really, really good, and I'm not quite at that level yet. I might get to it this summer.
@theskipper88686 жыл бұрын
+Gary Harmon how about a pipe made out of pine?
@greecherthecreature5 жыл бұрын
Im the 69th like lol
@johnrenelastre56513 жыл бұрын
Note to self. Don't smoke "tobacco" when shaping the mouthpiece.
@OnceUponAPipe7 жыл бұрын
This was excellent instructional. Especially like how you showed the steps at 9:30 Thanks for sharing.
@GarysWares7 жыл бұрын
+OnceUponAPipe Thanks for the feedback. I'm just doing what I love!
@pantrog964 жыл бұрын
You had me when the video started and you scolded the bad pipe makers. THAT'S WHAT I WANT TO HEAR, DAMMIT! I'm in.
@kevinhenderson81417 жыл бұрын
Gary, I don't smoke at all but love artisan work. you do a very nice job, especially highlighting the basics. It has inspired me to try my hand at it. have you made an vids of regular sized tobacco pipes? keep up the good work....
@raymondwhatley99547 жыл бұрын
as an avid pipe smoker I was a little disappointed to realize that these pipes aren't for tobacco but for "tobacco".
@GarysWares7 жыл бұрын
+Raymond Whatley So, you saw something on the internet that disappointed you, and instead moving on with your life, you commented about it? Way to contribute to the conversation. As far as disappointment goes, I suppose that makes two of us.
@chrisludolph3485 жыл бұрын
@@GarysWares im a tobacco smoker currently as a hobby and medicinal when I can get it. I see no reason why the skills and technique you display aren't universal. OP doesnt rep us. Also, you showed a chillum in the beginning of the vid, theres not a real pipe tobacco smoker who saw that and thought, Oh, I'd love to 1 hit this complex blend just to tease my taste buds.
@GarysWares5 жыл бұрын
Lol, thanks for the support. Some people just have a thought and have no choice but to tell the internet about it. There’s a subtle difference between “thoughts” & “thinking.” 😂
@DylansDIYWorkshop7 жыл бұрын
I believe that is a cove router bit that is missing it's bearing. Very informative video! Thank you Gary!
@gosonegr7 жыл бұрын
There are some without bearing, like dremell's ones
@Darcey_Monty07037 жыл бұрын
Dylan's DIY Workshop I just came from your channel
@kurtmoss60945 жыл бұрын
Cove bit with a pilot
@waynesutton24728 ай бұрын
I was a Master bowl maker specializing with replica medicine pipes 'peace pipe' by the age 14 sold hundreds various types ,styles,materials and could handle my buzz without causing all those simple mistakes not to criticize I just think mabye u have much better weed than I did in the 70s 80s , one tip I always harvested my one bowl material seemed part of the fun
@Donnybrook106 жыл бұрын
your bowls are burning out for two reasons. You're lighting them wrong and you failed to build your cake properly on the inside of your bowl. Once your cake is built, it will absorb moisture and protect the wood from heat. A pipe can last 100 years if taken care of and properly used.
@AllNaturalMike7 жыл бұрын
hey buddy, what was the intro to this video, the song is beautiful and amazing craftsmanship!