gas furnace not heating house blowing cold air

gas furnace not heating house blowing cold air
murch = teespring.com/stores/steve-lav
LAVIMONIERE PRODUCTIONS,LLC
subscribe to my channel
/ @stevenlavimoniere
facebook
/ steven.lavimoniere
web site
lavimoniereplumbingandheating....

[@marcootero92]

First thing first I would like to wish Steve and his family a happy new year, I'm a plumber from NJ but I don't work on oil boilers so I have to call one of my friend that has a heating company to come an service my boiler. This Christmas (2017) night my oil boiler went down, my house went down to 57 by morning and my wife was not to happy with me but I have been watching your channel on oil boiler repairs so I went to the basement did some basic troubleshooting and find that the transformer was bad so I went to the supply house and made the repair. So in closing my house is at 70 and hold with this cold weather. Thank You Steve.

[@ldiazmdiaz]

Steven the merciful, mouse gets to see the New Year.

[@lewiskemp7276]

Hi Steve. I have been an oil engineer in Scotland for over 40 years the burners are a different set up to the ones you work on but the fault finding is the same and I have learned a lot since I started watching you, I was learned when fault finding it is oil, coil, spark, photocell, and control box in that order would you agree with this order, oh and one other thing I was I pleased with your handling of the mouse I couldn’t have gone into the basement with a mouse there thank god there isn’t basements in Scotland most boilers are in the house or external keep up the good work even us old engineers (63) learn a lot from you Thanks.

[@laradolensky5882]

no basements! where do u put your workbenches? u must go to a pub in winter instead of closing in and keeping out of the weather.

[@BillyLapTop]

Steve, you are a wonderful humanitarian. Last week my Thermopride furnace gave up the ghost on the inducer motor. Only 3 years old and the bearings got toasted. It had to be replaced as a unit, not the motor alone. Was under warranty so only had to pay a labor charge. Well worth it. Regarding the little mouse, I have found using cooking oil rubbed into the fur that is attached to the adhesive breaks the glue bond and it is not toxic to the mouse. Glad you liberated the little guy.

[@Fireship1]

You got the heat choochin, saved a little life in the process. Truly next level Steve. Here's to a new year!

[@BobWhite777]

Best hvac channel on youtube. Thanks, Steve.

[@johnstran]

great job on the furnace also. give the mice life to live another day.

[@originalbluebuddha]

Just got back from South Dakota, the high was -6 yesterday with a wind chill of -23, so plenty more frigid air heading east toward you. Get some Bag Balm on the Baby Dog's nose and feet (maybe yours too). Happy New Year!

[@kylem6532]

You're a good dude Steve! Thanks for helping that little guy out.

[@johnmurphy6366]

Always a great sign to see that glow plug light !Happy Now Year to you and the big dog!Next level!!!

[@3500-e1d]

Steve's a workin man and a life saver yall

[@tommytmt]

Good job Steve!

[@edmarsh1965]

Good job as always Steve, the BABY DOG is working again ,YOU ALL"""It sure looks black & white to me MAMA!!!!!!!

[@sammacnab3514]

Love your videos Steve ! Happy New Year !

[@CindyBradyTooh]

You're good to all animals, Steve. I really admire that. Even bugs - you never hurt them. I heard to free a mouse from those horrid glue traps, all it takes it a little oil from the kitchen - vegetable oil, olive oil, cooking oil of some sort. The cooking oil breaks the bond, and the mouse can go free. ~Cindy! :)

[@dburto13]

Nice job Steve, next level! Happy New Year!

[@jonbarfield4915]

You have a kind heart. I have learned a lot from you.

[@RCG1211]

Excellent work steve

[@Spector_NS5_RD]

Thanks for freeing that mouse Steve and good fix on that little 40k BTU, 80%er. I think i would of been more concerned about how to free that mouse than getting that lady heat if i was there, lol. I have a big heart when it comes to helping animals, even a mouse!

[@TheOregonOutlaw]

Happy New Year Steve, Baby, & all the ladies or the manor!

[@willardearl76]

you are a good man Steve.

[@ravit6223]

god bless you steve for freeing the mice and good job !

[@LeftsnRights88]

Good job Steve. Happy New Year to you and the mouse.

[@josephpuchel6497]

Steve you saved the day Happy New Year

[@edmarsh1965]

good job again,steve

[@patstansberry8189]

An other happy customer and a Happy mouse. Have a blessed New year

[@MookieMan1]

Pat Stansberry they got inside somehow... and probably staying warm in the basement.

[@erics9213]

Humanitarian of the year!

[@danf2588]

Well done Steve. " The best laid schemes of mice and men".

[@wahbii]

Staying busy Mama!!! All work, no play.

[@sknight0391]

What would you do without the good ole SC56’er? Is that the original one that you've been using all these years or did you buy a few and squirrel them away for a rainy day? I think that's the best meter Fieldpiece ever made.

[@sergiografbike]

Happy New Year Steven! Best Regards from Brasil!

[@VENOM-_-15]

*sees mouse - "hu hu hu hehe neeeext level!!" Lmfao classic steve

[@danielsteele7544]

You have a good heart in you.

[@thetiredtechie2704]

Well done :)

[@vincentpadalino8003]

Great video like usual. What kind of boots you wear? I'm looking for a decent pair. I do service work like you.

[@robertnocerajr3985]

Good man..

[@jonathantzachor6680]

loved the ending

[@thetruthmatters7]

thanks for the video! God bless you, and Jesus Loves you!

[@VENOM-_-15]

I wonder if Steve ever calls tech support.... "HEY STEVE DO TOU EVER CALL TECH SUPPORT???"

[@caithnessrailrambler2698]

Saved that mouse's life stevo!

[@dannywilkins887]

good job and a humane act as well,nice..

[@stf2400]

Sadly it’s not always good news. At least you have it running again, but “Mom, Steve is working again.”

[@aircooledtx]

Wow, mouse is stuck to floor mat. Free at last. Heat too. Steve Lav . is humane.

[@Blobjonblob]

That mouse will remember the day he was saved by Steve Lav.

[@BaFunGool]

As a Masters of Jerry-Rigging, nothing more I despise is not doing a temporary fix, especially if elderly and children are involved.. Old Bryant furnaces are notorious for that.

[@jason-ge5nr]

And he goes about chewing thru the thermostat wire

[@kevtris]

I find it weird that the air filter leads into the area with the electronics like that. I don't think I have seen that before, usually the electronics are out of the airstream I thought. If a cap explodes or that transformer lets go, it would make a stinky mess of the entire house vs. just the vicinity of the furnace

[@montehyler]

Good job freeing the mouse. I would have done the same!

[@bg147]

Nice repair. I was hoping you would let that little guy loose. Those glue strips are nasty.

[@erics9213]

Why did that connection flash when you disconnected the motor if the power switch is off?

[@RastaHuis]

nice job, but i would've taken the mouse outside and then let it go free, keeps it out of the house.

[@peted2770]

Getting hammered with no heats and insufficient heat over here on the Cape. Its getting cold out Mamma!

[@OcRefrig]

Good vid. So, interested to know. Anybody know who,s furnace it was ? Goodman ?

[@stevenlavimoniere]

i could tell by the door .and color

[@polishtheturdmickelson5473]

Goodman GMP series

[@warrend114]

HAAA Dead mouse NEXT LEVEL!!

[@derekobidowski5784]

A bound up draft inducer in the brute of the Northeast cold. not good. at least they gave you a C frame motor inducer for it near the end of the video i can hear your truck running at high idle to keep the baby dog warm and comfy. too bad you didn't do a combustion test on the furnace.

[@spikey911usa]

Soap and water or a little oil will free them off those mats pretty quick

[@warrensharp935]

Baby dogs working again mama

[@Taluvian]

Have to use olive oil to get them off.

[@fishsquishguy1833]

Best fucking "Next Level" @ 01:45!!!

[@brianmanning34]

Next time squirt some wd40 on the glue & it will release, you got lucky it was so cold

[@1205brianluce]

free

[@jorgevega238]

I would've put a high voltage charge on that mouse

[@arkanoiddude]

You're so cool dude

[@BaFunGool]

Video couldn't have come at a better time. Waiting on absentee landlord to arrive at location, to open house, received photos of system, old General Electric (birds nest) hot air system, fan running burner train not firing.. going to pull a Hail-Mary play. Johnston Supply is closed. Owner and tenant playing with it for a week, go figure, Million Dollar property in Douglaston Queens, everyone playing games via Home Depot (expert) advice.

[@johnmurphy6366]

John S ,M and L supply,new bridge road in bellmore,right off souther state parkway,open till 5 pm,good luck.

[@yannit67]

Something I don’t understand. You let the mouse go - okay, but shouldn’t you have removed the sticky paper then? In a moment another mouse will be caught. You should have killed the mouse. Rodents in a house is a pain in the a…

[@johnwhitley4383]

You should not get paid that trap was there for a reason not your house I wouldn't recommend you after this poor judgement on your part

[@FixthisCD]

Feed him to the chickens

[@arkanoiddude]

Do chickens eat mice?

[@gordom3492]

You should stick that glue trap over your mouth.