I turn a Railroad Track into an Anvil - using an Angle Grinder.

  Рет қаралды 4,763,220

Gavin Clark DIY

Gavin Clark DIY

Күн бұрын

Пікірлер: 4 600
@hankengai
@hankengai Жыл бұрын
To create this with only a grinder as main tool, you need a sturdy hand and good eyes, all conected to a sharp mind. Respect! Great piece of work!
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much, I am glad you liked it.
@sickwilly1171
@sickwilly1171 8 ай бұрын
Just retired, 40yrs Union Sheetmetal Worker. Well done, very nice job. 👍
@Rocco25.6
@Rocco25.6 8 ай бұрын
Right on with that!!
@skylerbrycesmith
@skylerbrycesmith Жыл бұрын
Most people won’t truly understand the amount of work that went into this just using a grinder. Incredible work!
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much, I appreciate your comment.
@madhatter3493
@madhatter3493 Жыл бұрын
A grinder is one versatile tool in skilled hands for sure
@madhatter3493
@madhatter3493 Жыл бұрын
I 100% would have rough cut everything with the torch and then grinded it out
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
@@madhatter3493 I agree it would make the project much easier to do, but I am trying just to use simple tools in these videos if I can.
@madhatter3493
@madhatter3493 Жыл бұрын
@@GavinClarkdiy i understood most peoplle dont have access to a cutting torch even peoplle with access may not be able to use it properly took me a while to get the hang of it but a grinder is a cheap tool and will still get the job done which you so expertly demonstrated i dont think id have been able to get those curves grinded out evenly and i use a grinder every day but i want to try so im gonna be on the look out for some rail road cutoffs now
@thedeclutteringdad4477
@thedeclutteringdad4477 Жыл бұрын
As someone who hates pulling the grinder out, I have massive respect for the amount of work that went into this
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much, I appreciate your comment.
@ФлорДобинда
@ФлорДобинда Жыл бұрын
😅
@oannguyenvan7446
@oannguyenvan7446 Жыл бұрын
​@GavinClarkdiy 22:01 22:02
@JoseAntonio-lh5ye
@JoseAntonio-lh5ye Жыл бұрын
​@@GavinClarkdiyOlá sr Gavim, parabéns pelo trabalho, preciso fazer uma, tenho um pedaço de trilho de 25 cm e tenho uma lixadeira angular de 3/4 (disco de 100 ) mm 800 watts , será que dá pra cortar? Desde já agradeço; Zé Pezão,MG Brasil.
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
@@JoseAntonio-lh5ye Sr. Zé Pezão, O pequeno moedor que fez a maior parte do trabalho neste projeto foi um de 720 watts e 125 mm (5 polegadas), então minha resposta é sim, você provavelmente poderia fazer isso com seu moedor, não pressione com força o moedor apenas deixe o disco fazer o trabalho e pare e deixe esfriar se estiver ficando muito quente. Tente e veja como fica, você usará alguns discos quando terminar. Use seu equipamento de segurança, desejo-lhe o melhor para o seu projeto. Saudações da Austrália.
@paulwilliams6753
@paulwilliams6753 2 жыл бұрын
You are 75% craftsman, 25% magician. Great work!
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much, I appreciate your comment.
@romangrayjr
@romangrayjr 5 ай бұрын
I just bought a 16" railroad tie anvil from a guy who made it and was selling it on Facebook marketplace. He was asking $40, and that's what I paid. I figured that was a swingin' price for all the work he put into it.
@TexasNationalist1836
@TexasNationalist1836 4 ай бұрын
$40 for all that labor you got a steal my friend
@tonystokes9950
@tonystokes9950 Жыл бұрын
I have a piece of old rail track like that this 80 year old guy gave me. he said you got any use for this? I said hell yea I'll make an anvil out of it. I'm glad I ran across this video. I've welded a lot of years, and this guy here really knows how to control them grinders, great job.
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much, I am glad you liked it and I appreciate your comment. I wish you the best for your project.
@weeesus420
@weeesus420 10 ай бұрын
I have a piece about a third of this length (width of a plate) could i do anything with it
@GavinClarkdiy
@GavinClarkdiy 9 ай бұрын
@@weeesus420 I would just level to top off, it would give you a good small area to do small things. Cheers!
@Rocco25.6
@Rocco25.6 8 ай бұрын
The time is the key when doing anything work with the iron lots OF Patience and effort !
@joemccarney4155
@joemccarney4155 3 ай бұрын
Definitely good enough to keep me interested. I’ll never call you lazy. I admire the idea and tenacity. Thank you.
@1eltino
@1eltino Жыл бұрын
As a fabricactor that does alot of grinding and welding that was a joy to watch and most watching won't realise how much effort that took to make that using only angle grinders. Well done 👏
@andrewgrizzle
@andrewgrizzle Жыл бұрын
I’m a fabricator also, and I do respect how much time it took, but bothered by the amount of money in disks spent and I refuse to believe he doesn’t own a torch to cut all that out lol
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much, I am glad you liked it and I appreciate your comment.
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
I am trying to just use simple tools to do things on the channel if I can.
@nedcramdon1306
@nedcramdon1306 Жыл бұрын
Welding or grinding is not easy at all.
@kenwebster5053
@kenwebster5053 Жыл бұрын
Well done! When I was a young man, I got a piece of rail, intending to make an anvil from it. Well that was maybe 40 years ago & I still haven't started the job. So all kudos to you for actually doing this.
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much Ken, I am glad you liked it and I appreciate your comment.
@13Voodoobilly69
@13Voodoobilly69 Жыл бұрын
I recently retired as a machinist and I sniveled if I had to grind a 1/8” piece of angle iron, knowing I could mill it so much faster. ❤️. My hat is off to this guy.
@СамолетСобакин
@СамолетСобакин 2 жыл бұрын
Твердая рука, отличный глазомер, титаническая выдержка, ну и аккуратность наконец то творят чудеса. Я в восхищении! Браво! Таким людям нужно памятники чугунные на вокзалах и площадях ставить! Сам любитель творить руками, но это виртуоз! Еще раз браво!
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
ВАУ, спасибо большое, я рада, что вам понравилось. Я очень ценю ваш комментарий.
@タマラ-d8m
@タマラ-d8m Жыл бұрын
Люблю звон наковальни от молота. Отличная работа! Благодарю за приятно проведенное время.
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Большое спасибо, я рад, что вам понравилось. Это один из моих любимых звуков, такой чистый звук. Спасибо за ваш комментарий.
@ТоляВиноградов-ж8ъ
@ТоляВиноградов-ж8ъ Ай бұрын
@@タマラ-d8m это не наковальня,ковать на ней не получится,только старые кривые гвозди прямить,я тоже с такой начинал,пока большую не купил.Красиво но безпонтово
@Colorado-Tinkering
@Colorado-Tinkering 2 жыл бұрын
I’ve got four pieces of rail sitting in my garage for over a year now. Been looking for the right time to turn them into anvils - give them away as presents etc. Your video is the best one I’ve found for someone with just some grinders and other minimal tools. Thank you for the nudge to get mine started.
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much, I appreciate your comment and I wish you the best for your projects.
@erroldavis2983
@erroldavis2983 2 жыл бұрын
What would it cost me to have you ship one of those to me in the Virgin Islands??I need a project like that to lighten up my brain, Would love to build one like this.
@Colorado-Tinkering
@Colorado-Tinkering 2 жыл бұрын
@@erroldavis2983 sorry, but it would be hugely costly, I’m afraid. but perhaps there are companies that specialize in that?
@DoubleJThe
@DoubleJThe 2 жыл бұрын
I'll take one as a present!
@beachbeemer
@beachbeemer 2 жыл бұрын
Beautiful work using masterful skills. I just don't understand why you didn't wear a respirator.
@johnchtourou3780
@johnchtourou3780 2 жыл бұрын
Gavin I've been a machinist all my life I'm seeing and admire your beautiful work as one truly excellent craftsman
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much John, I appreciate your comment.
@fredford7642
@fredford7642 Жыл бұрын
Something so simple as an anvil, yes, but a real work of art.Very nice work, and a keeper for decades!
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much, I appreciate your comment.
@189951
@189951 Жыл бұрын
Magnifique travail avec ce bout de rail de chemin de fer ou l'acier est de première qualité et donne ce résultat remarquable quand il est réalisé de mains de maître par un ouvrier avec des mains en or !💙🤍❤
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Merci beaucoup, je suis ravie que cela vous ait plu et j'apprécie votre très gentil commentaire.
@189951
@189951 Жыл бұрын
@@GavinClarkdiy De rien, c'est méritée! 😊
@user_DrIvanoff
@user_DrIvanoff 2 жыл бұрын
🙂видео надо было назвать: " терпения у меня очень много." У меня бы не хватило. Классный урок.
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Я думаю, ваш заголовок правильный, но я должен сказать, что мне понравился этот проект. Спасибо за ваш комментарий.
@АлександрТидеман
@АлександрТидеман 2 жыл бұрын
Можно было бы и газовый резак прорекламировать.
@user_DrIvanoff
@user_DrIvanoff 2 жыл бұрын
@@АлександрТидеман а зачем?
@fredferd965
@fredferd965 2 жыл бұрын
Precision, symmetry, confidence when working with tools, and most important, the artist's eye. Very well done!
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much, I appreciate your comment.
@thomasmcmahan2014
@thomasmcmahan2014 2 жыл бұрын
I can’t get over how flat you were able to get it by hand! Outstanding job overall. I have a piece about the same size I’ve been meaning to turn into an anvil, after watching this I have better confidence now.
@Onyx13
@Onyx13 2 жыл бұрын
Still look for Werk-Partner Premium grinding disc set - 10 x flap disc 125 mm Ø - grit 40, 60, 80, 120 for metal, steel & wood - flap disc for angle grinder/Flex Amazon
@louisleoncini1033
@louisleoncini1033 2 жыл бұрын
ME TOO.
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much, I wish you the best for your project.
@moustachemike7128
@moustachemike7128 2 жыл бұрын
do it out side...
@everready19373
@everready19373 2 жыл бұрын
You beat me to the comment. I pulled one out of a neighbors trash 2-3 years ago.
@roberttresemer8226
@roberttresemer8226 Ай бұрын
About 6 years ago, I made an anvil for my brother out of a piece of railroad rail. Fortunately, I have a Bridgeport mill which I used to do most of the cutting work. What I did made me seem lazy compared to the amount of work you put in with a grinder. You did a beautiful job. The fact that you did all of the work by hand with a 9 inch grinder, shows that you are a true craftsman. Well done.
@GavinClarkdiy
@GavinClarkdiy 25 күн бұрын
Thank you very much, I appreciate your comment. To stand at a milling machine and watch while I am drinking a coffee would be the smart way to do this, but I am trying to just use simple tools on the channel if I can, plus I sort of enjoy this stuff. Thank you for your comment. Cheers
@АлександрБелозёров-е2м
@АлександрБелозёров-е2м 2 жыл бұрын
В этот кусок металла вложена душа художника и она радует глаза и уши. Талант!
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Большое спасибо, я ценю ваш комментарий.
@АлександрБрыляков-м9л
@АлександрБрыляков-м9л 2 жыл бұрын
тОЛЬКО БОЛЬНО УЖ ВСЁ ТРУДОЁМКО МОЖНО ЖЕ ЧТО ТО И НА СТАНОЧКЕ СДЕЛАТЬ
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
@@АлександрБрыляков-м9л Да, все это можно сделать на машине, всего несколькими нажатиями кнопок.
@pliofcho4237
@pliofcho4237 Жыл бұрын
At the beginning of the video I was thinking "wow what a great idea".. at the end I'm thinking "wow that's an insane amount of hard work"... Respect!!!
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much, I appreciate your comment.
@murphmurph2124
@murphmurph2124 7 ай бұрын
That's absolutely the best anvil in the whole world 😊
@wh1skey7even38
@wh1skey7even38 3 ай бұрын
I just love the way you show the viewer exactly what you use to make this project. Thank you so much. Excellent work!
@TonersR6
@TonersR6 2 жыл бұрын
I think the coolest thing about this video is you were able to accomplish this with some of the most common, basic tools that are available. Goes to show that you don't need milling machines or thousands of dollars in specialty tools to make something not only of quality, but also incredibly cool. Very inspiring:)
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much, I appreciate your comment.
@stoneblue1795
@stoneblue1795 2 жыл бұрын
Dedication or a considerable desire to succeed apparently can take one quite far.
@herodotusofhalicarnasis2394
@herodotusofhalicarnasis2394 Жыл бұрын
Just a billion dollars worth of perseverance
@thehiddendoor6478
@thehiddendoor6478 Жыл бұрын
Truly beautiful stock removal technique, and the finished product speaks for itself. It was a pleasure watching the process from start to finish. I'm going to have my son watch this, just to get an idea of what can be accomplished with an angle grinder.
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much, I am glad you liked it and I appreciate your comment.
@jeffreyoneill6439
@jeffreyoneill6439 7 ай бұрын
Very very well done. I’m jealous of your talent, AND your anvil.
@TheMadComputerScientist1787
@TheMadComputerScientist1787 10 ай бұрын
That's the coolest use for a piece of old rail. That looks like the perfect anvil for a wood shop that does light metal work .
@GavinClarkdiy
@GavinClarkdiy 10 ай бұрын
Thank you very much, I am glad you liked it. I only do light stuff, flat bar with rivets etc, and round rods, I make steel boxes with rivets and flat bar. Cheers!
@rickoncordova1
@rickoncordova1 2 жыл бұрын
Awesome job Gavin. I'm a retired union sheet metal worker and I very much enjoy your projects. I've been wanting to set up a work bench in the garage and try my hand at making a few of your rebar nick knacks. I now know what my first project will be. I have a 2' piece of rail road track that will soon become an anvil. Thank you for the inspiration. Rick. [Near Peterborough, Ontario, Canada. ]
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much, I appreciate your comment Rick, I hope you get the workbench up soon and start your anvil, I wish you the best.
@АлексейРяков-о4л
@АлексейРяков-о4л 2 жыл бұрын
Awesome job...Really....Amazing...Я из России,и я думаю,не очень много людей смогут это повторить...
@hfncncn8112
@hfncncn8112 2 жыл бұрын
@@GavinClarkdiy EeeeS
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
@@АлексейРяков-о4л Большое спасибо, я очень ценю ваш комментарий. Большое спасибо
@davemoore2539
@davemoore2539 2 жыл бұрын
Try Walter excavator grinding disk's for heavy removal they're a game changer at least in my opinion
@donaldmatthies6026
@donaldmatthies6026 2 жыл бұрын
Gavin, Everything about your railroad anvil turned out great, from the set up, to the final product. Thank you for taking time to film, edit and post this video.
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much David, I am glad you liked it and I very much appreciate your comment.
@ТоляВиноградов-ж8ъ
@ТоляВиноградов-ж8ъ Ай бұрын
Все красиво,только бесполезно,на такой наковальне не накуешь
@Deano034
@Deano034 2 жыл бұрын
Wow, that was bloody awesome and all with a grinder. Even if it’s not used for it’s purpose it just looks great. I’d even put it inside the house as a display piece if the missus would let me. Great work yet again.
@joseislanio8910
@joseislanio8910 2 жыл бұрын
For me it's the exact opposite. If I made one, my wife would put it in the living room for decoration. She did it to a small smoothing hand plane I made XD
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much, I appreciate your comment, make one and give it to her as a present, don't forget to engrave it, hahaha. thank you very much for your comment.
@Orange-Jumpsuit-Time
@Orange-Jumpsuit-Time 2 жыл бұрын
If she gives you any squawk, just threaten to drop it on her head.😅🤣😂
@ИгорьВласов-ц4в
@ИгорьВласов-ц4в 2 жыл бұрын
Привет! Всегда старался повторять ваши работы. Но делать наковальню точно не буду. У меня просто нет тонны отрезных кругов и столько терпения 😀 А изделие получилось красивое и даже стало его жалко, когда постучал по нему молотком. 👍
@НиколайГоряев-ч6ш
@НиколайГоряев-ч6ш 2 жыл бұрын
А я попробую, только не Р63)
@NikBond-u7l
@NikBond-u7l 2 жыл бұрын
Он наверное еще и за яйца себя подвешивать любит тайно за кадром... Садомазохист. 😏 Я все ждал когда он напильник достанет или полотно по металлу. Аж жалко его стало и особенно ушм.
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
@@NikBond-u7l Ха-ха-ха, я буду держать то, что я делаю, в тайне, в секрете. Мне нравится твой комментарий. Спасибо
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Большое спасибо за ваш комментарий.
@anatolyyakovlev2861
@anatolyyakovlev2861 2 жыл бұрын
Для снижения трудоёмкость попробуй высверлить используя сверло... 🙂
@alanbutler7712
@alanbutler7712 Жыл бұрын
Fantastic job! I wouldn't have thought about using the center point to mark the curves in the vertical section. Thanks for taking the time to film this!
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much, I am glad you liked it and found something useful in it.
@tomt9543
@tomt9543 2 жыл бұрын
Alright, you proved to me that you were capable of pretty much anything when I challenged you to make a Prusik knot from rebar, and you did it…… cold! But this one is over the top! I retired in 2020 after 41 years as a certified welder for the railroad, and I’ve seen all kinds of crude anvils fashioned from different sizes of rail including a piece of 132lb. (Per yard) that I have on a stump in my shop. It’s length is similar to yours, and my brother in law who’s a machinist volunteered to take it and machine the top flat on a mill, the rest is untouched. Yours, on the other hand, is an absolute work of art, and the beauty of the finished product hides the incredible amount of work that it took to get it to that point! Kudos Gavin on an exceptionally well done job! I bet you’ll get a Christmas card from the people that make your cutting and grinding discs! I also hope you wore a dust mask of some type! Keep em coming Sir! Cheers!
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Hi Tom, what an awesome comment, thank you very much I am very happy that you liked it, I value your input to my videos. I have and do wear a mask when I feel it is needed, but as I am generally working outside, and normally have a breeze blowing across my workbench I quite often can use that and work on the fresh air side of the job, you can often see that breeze flapping the tag on one of my power leads behind the bench. Thanks Tom, cheers mate.
@jamespolucha8790
@jamespolucha8790 Жыл бұрын
I’ve seen guys make things with a chain saw and a log but to make an anvil from railroad track and a grinder ? You are truly a craftsman, thanks for the video
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much, I appreciate your comment.
@timcarter1164
@timcarter1164 2 жыл бұрын
Beautiful piece of work. I would absolutely love to have one of those just sitting in my living room as a piece of art. Let alone the full functionality of it. I say again, beautiful piece of work.
@mylesjarvis7571
@mylesjarvis7571 2 жыл бұрын
Me too!
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much, I appreciate your comment.
@VndNvwYvvSvv
@VndNvwYvvSvv 2 жыл бұрын
Art piece is good, because it lacks properties you need in a functional anvil
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
@@VndNvwYvvSvv I only do small things on these, Flat bar with rivets etc and round rod, and not very often so it will do for what I want, but I do have a friend that could harden it if I need it. I have been using a rail doing this for a while. Thank you for your comment.
@LumpinLoaf
@LumpinLoaf 2 ай бұрын
​@@GavinClarkdiylol I was looking for this part. I am mostly clueless about these things but I was wondering if all the grinding softened it up or what the hardness was compared to anvils. Beautiful job though that is an amazing skill and attention to detail.
@TheHookBoy
@TheHookBoy 2 жыл бұрын
This is my first time seeing a video from you and I’d imagine you have many other tools/ways to do this. However, you doing it by hand has left my jaw on the ground and shows a true master at work. This was amazing and mind blowing. 🤯
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much, I am glad you liked it. I appreciate your comment.
@LawtonDigital
@LawtonDigital 2 жыл бұрын
I greatly admire your patience and precision. I made one of these by flipping the rail 180° and welding on feet. The rail bottom (now top of the anvil) is already flat and has more surface area. It's also easier to drill in a pritchel and hardy holes. Your anvil looks much better than mine and has a useful horn.
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much, I appreciate your comment. Your anvil has a much bigger working surface than mine, and I don't see myself attempting to put in a hardy hole in mine. Thank you for your comment Robert
@CatNolara
@CatNolara 2 жыл бұрын
but the bottom looks a lot thinner, hope it doesn't warp too much with use
@dustinread6407
@dustinread6407 2 жыл бұрын
@@CatNolara good point
@karlmiller7500
@karlmiller7500 2 жыл бұрын
That's a good idea
@sgt_retiredcharlie4102
@sgt_retiredcharlie4102 11 ай бұрын
I didn't know that you could turn "turning a hunk of metal into a tool" into art! But you, my friend have accomplished it! Bravo!
@GavinClarkdiy
@GavinClarkdiy 11 ай бұрын
Thank you very much, I am glad you liked it and I appreciate your comment.
@joekamleh6049
@joekamleh6049 2 жыл бұрын
Gavin, you are a true master craftsman. You handled those grinders with the grace of an artists brush, especially on the curves and not forgetting the straight lines which look like they were laser cut. From a proud fellow Aussie, well done mate!
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much Joe, I appreciate your comment. Cheers mate.
@normankerr9948
@normankerr9948 Жыл бұрын
Well done, Mate! The finished product represents a whole bunch of time, effort and thought on a very useful product for the DIY crowd. Much appreciated.
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much, I am glad you liked it and I very much appreciate your comment.
@novajoe67
@novajoe67 Жыл бұрын
Gavin great video! Love the way the anvil looks, I will follow your plan. Thanks for sharing!
@TheCandBExperience
@TheCandBExperience 9 ай бұрын
At first, I thought you were going to chuck that thing in a mill and buzz it flat on top. I had to keep watching when you started grinding on it. I really appreciate the work you put into this anvil with just a hand held grinder, cut off wheels and grinding disks and a wire wheel brush. Great work!
@GavinClarkdiy
@GavinClarkdiy 8 ай бұрын
Thank you very much, I am glad you liked it. I appreciate your comment.
@Hottamales1
@Hottamales1 2 жыл бұрын
This was an awesome step by step process. I am going to give it a try. Thank you
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much, I wish you the best for your project.
@matthewmclaurin1540
@matthewmclaurin1540 2 жыл бұрын
I love that you show what discs you are using! Makes it easier for someone trying to replicate your projects at home
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much, I appreciate your comment. I am very happy with these discs so I have no problem in letting others see what I am using.
@stephenharrison8741
@stephenharrison8741 2 жыл бұрын
Well done Gavin. Another great job showing what can be done with basic tools. I still hold you responsible for getting me back in my shed and I've just had some of my work shown at the Wollombi Sculpture Festival. So thanks again Gavin. Steve.
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much Steve, I appreciate your comment, I love your work, and am looking forward to catching up, when we are up your way next.
@joemccarney4155
@joemccarney4155 3 ай бұрын
It definitely walked me through my life. I remember all kinds of jobs that I’ve done. I may put this on my list.👍
@hawkowl455
@hawkowl455 2 жыл бұрын
Amazing work. That was indeed a lot of work and effort that went into this anvil. Awesome.
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much, I am glad you liked it and I appreciate your comment.
@chrisneuhaus7188
@chrisneuhaus7188 2 жыл бұрын
Just discovered your channel. I've always been a tinkerer and like to putter in the shop in my spare time. I love stuff like this and now that I'm retired I see me doing the same type of things to stay busy and be creative in my spare time. I have a great appreciation for what I call the old skills. I grew up around mechanics, machinists and carpenters. Even worked with a few blacksmiths/farriers years ago. Always loved turning a piece of "scrap" into a useful tool or object. Thanks for sharing what you love to do.
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
I feel the same way you do, I like the old skills too. Thank you very much, I appreciate your comment.
@tonystanley8186
@tonystanley8186 2 жыл бұрын
Absolutely beautiful job on this. The amount of work that goes into doing this is incredible. I will say from experience as someone who forges on a rail anvil that this type of setup isn’t ideal. Standing the rail on end is the best approach as it gives you more mass, less bounce, and a lot less ring. It’s less work surface and ugly but far more functional. Rails have a flexibility for the trains and doing anvils in this way just has too much ring and bounce. Looks amazing though!
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much, I appreciate your comment. Thank you for your info, yes that makes sense.
@boxhawk5070
@boxhawk5070 2 жыл бұрын
Is the iron in a rail hard enough to make a decent anvil? I know nothing about forging by the way.
@tonystanley8186
@tonystanley8186 2 жыл бұрын
@@boxhawk5070 It is. As I said above, stand the rail on end and it makes a really good anvil. I've been using mine for over a year with regular use and my friend who got me into it has been using his for a few years. Once to test I hit it as hard as I could with a 2lb hammer and barely left a mark.
@thora8624
@thora8624 2 жыл бұрын
Umm, the density of the steel remains the same no matter what direction the rail is oriented, so no that's not exactly true...
@tonystanley8186
@tonystanley8186 2 жыл бұрын
@@thora8624 Density may have been the wrong word. There's more mass under it on end and that mass translates into it being easier to work the steel when forging because it has less bounce.
@tufelhunden5795
@tufelhunden5795 23 күн бұрын
Fantastic work. I’m really impressed. I know if I tried this it would end up looking like a piece of modern art. All melted and no straight lines. 😂
@bobgereaux9138
@bobgereaux9138 Жыл бұрын
Gavin, very impressed with this work of art. Im most impressive with your steady controlled use of that angle grinder. You are certainly a true craftsman! Keep these videos coming!
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much Bob, I am glad you liked it, and I appreciate your comment. Cheers!
@bradthurkle7217
@bradthurkle7217 2 жыл бұрын
Mate that’s brilliant. Lot of grinding but look what you get. Mate your channel has grown immensely. Well done 👍.
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much Brad, I appreciate your comment, yes all is going well with the channel I am very happy.
@oscarcabrera1320
@oscarcabrera1320 2 жыл бұрын
Le quedó excelente!👏👏 tengo una echa igualmente con riel de ferrocarril y la utilizo mucho . Saludos y mis respetos maestro!
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Muchas gracias, agradezco tu comentario.
@Methadras
@Methadras Жыл бұрын
What a lot of people don't realize is that used railroad track that were under heavy loads for a long time are pretty well cold worked to the point that their hardness and durability is outstanding. If you can get a railroad track steel for any kind of project, do it. You won't be sorry. Knife making with this material is pretty nice too.
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much, I appreciate your comment.
@robertnorton3870
@robertnorton3870 2 жыл бұрын
I love these small rail anvils and this one in particular looks beautiful. Great work!! I have a small piece of track I use as my bench top anvil and I feel it’s about to get a transformation. Thanks for the inspiration!!
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much, I wish you the best for your project.
@garychandler4296
@garychandler4296 2 жыл бұрын
Me too, best video here. I have a couple of truck brake rotors and 6" pipe I'll turn into a stand.
@OKCorgiRanch
@OKCorgiRanch 2 жыл бұрын
As usual, Gavin, your skill as a craftsman leaves us mere mortals in awe. Thanks for another great video!
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much Carl, I appreciate your comment.
@mohammedkhader3289
@mohammedkhader3289 2 жыл бұрын
كلامك جميل 👍🌹🇸🇩🇸🇩
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
شكرا جزيلا لك.
@radleysmith7528
@radleysmith7528 2 жыл бұрын
Great use of tools, any chance you can administer some craft to Dan Andrews ballsack with them🤣
@wildtony79
@wildtony79 Жыл бұрын
When I was doing metalwork in high school what you set down on the bench about 20 seconds in was our anvils! Great job turning them into something decent.
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much, I am glad you liked it and I appreciate your comment.
@markbooth5983
@markbooth5983 Жыл бұрын
Great performance Gavin 10 out of 10......You've got another Subscriber, keep up the great work !
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much Mark, I am glad you liked it. I appreciate your comment and welcome to the channel.
@V8SKULLS
@V8SKULLS 2 жыл бұрын
Absolutely beautiful, nicely done, you inspired me to make one.
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much, I wish you the best for your project.
@Nanogrip
@Nanogrip 2 жыл бұрын
Amazing work! I have a similar piece of railroad and I've been wondering how I can finish its surface to have a flat top without a milling machine. I've had it over a year and looks like I've found the right KZbin video to get me started. Thank you and greetings from the tiny Pacific Islands of Palau!
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much, I wish you the best for your project.
@gejoosten5108
@gejoosten5108 10 ай бұрын
It is always a joy watching a true master at work, as it takes great skill to make it look easy!
@GavinClarkdiy
@GavinClarkdiy 10 ай бұрын
Thank you very much, I appreciate your comment.
@100nortonfan7
@100nortonfan7 2 ай бұрын
You did a super-splendid job of it, Gavin! I've had a chunk of rail under my bench for decades, just for this purpose. However, life gets in the way, as we all know too well. I realize the amount of work, talent and determination one must garner to complete such a beautiful tool, such as the one in this story. Thank you for inspiring me to get off my rump and get crackin'...cheers mate, from California, USA.
@GavinClarkdiy
@GavinClarkdiy 2 ай бұрын
Thank you very much, I am glad you liked it, I appreciate your comment and I wish you the best for your project. Cheers
@rayduke7433
@rayduke7433 2 жыл бұрын
You made this look relatively easy. Masterful piece and almost art. Well done. I really don’t think I could do this.
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much, I appreciate your comment.
@ryberget
@ryberget 2 жыл бұрын
Truly impressive! Thank you for taking the time to make the video. And that sound 🤩
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much, I am glad you liked it, I like that sound too. I appreciate your comment.
@alejandro182220
@alejandro182220 2 жыл бұрын
Great job. The love he puts into what he does is remarkable.
@vasssab
@vasssab 2 жыл бұрын
После потраченных сил жалко будет колотить ее молотом. Точно как скульптор!
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much, I appreciate your comment.
@sapphodesigns2377
@sapphodesigns2377 5 ай бұрын
Good to see talented Aussies producing great stuff!
@kelvincolemanAnimal
@kelvincolemanAnimal 2 жыл бұрын
I can’t thank you enough for this video. It’s amazing I’ve had a four foot piece of track knocking around my workshop for a couple of years and always wanted to make an anvil but wasn’t sure how to go about it and you make it look easier than I thought it would be you sir have a very happy subscriber and a new best friend 👍👍👍😊😊😊♥️
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
Thank you very much, I wish you the best for your project. Welcome to the channel. Cheers
@74KU
@74KU 2 жыл бұрын
Do yourself a favor and do 99% of the work 100% faster on a shaper, or a mill, or a lathe or a surface grinder.. anything but a grinder tbh.
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
@@74KU You are right, and I can do it by holding a coffee and watching the work happen. I did enjoy this and probably picked up a few skills along the way. Cheers Mate
@stevendonnison7
@stevendonnison7 2 жыл бұрын
@@GavinClarkdiy there's no other way to do it, a craftsman is a craftsman, not a button pusher. I earned my motor mechanic papers back in the early 80's, and I walked away from the trade the next day. Why? Because that was the start of the remove, and replace method of fixing the problem. Ford had a recall for an issue, which required about an hour, and the replacement of parts. I figured out how to fix the problem without changing any parts, and it took no longer than 10 minutes. I told the foreman, and showed him how to do the job, and I was told that I had to do it Ford's way, even though my way fixed it, and saved them a lot of money. A button pusher lacks creativity, and the ability to problem solve. Gavin could have jumped on eBay, and bought himself an anvil for much cheaper, but then he can be proud of his creation, and he has taught us something great, and the skills can be transferred to other things. Sorry, I'm not trying to be a problem, or be negative, so no offense. Cheers.
@GavinClarkdiy
@GavinClarkdiy 2 жыл бұрын
@@stevendonnison7 I appreciate your comment Steven, thank you. In the early days a fitter would say "I fixed that pump and it has now run for 6 years without a problem" and say it with pride. Now we tend to just replace things and it seems the pride in many jobs has gone, it's just, change this tighten it up and move to the next job. Quite sad really, but that is what is most economacal for the business.
@LeandroAdeSa
@LeandroAdeSa Жыл бұрын
Trabalho magnífico!!!
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Muito obrigado, fico feliz que tenha gostado.
@soltanamir6061
@soltanamir6061 Жыл бұрын
راءىعة عمل مضن انها تحفة
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
شكرا جزيلا لك ، أنا سعيد لأنك أحببته ، وأنا أقدر كثيرا تعليقك.
@BluetoothBlades
@BluetoothBlades Жыл бұрын
Those flapper disc's are from HEAVEN, I use mine to sharpen tools and lawnmower blades, they make quick work of a project... Awesome job by the way 😊
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much, I am glad you liked it. I love using the flapper discs too, amazing bit of gear to have.
@danielsmith3038
@danielsmith3038 Жыл бұрын
Gavin ,you have no idea how much I enjoy watching your videos, and building alot of your idea's and showing us in the United States, the out back ! I would love to live there! Keep it up ,all you projects are amazing
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much Daniel, I appreciate your comment. Greetings from Australia.
@87mini
@87mini 14 күн бұрын
You've inspired me to finally work on my old piece of rail! I think I'll let my plasma cutter do the rough work, though! I think my neighbors would revolt if I spent three days cutting with an angle grinder!
@mikedunn7795
@mikedunn7795 Жыл бұрын
Turns an old section of railway track into a classic anvil. Well done!
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much, I appreciate your comment.
@torsten6490
@torsten6490 10 ай бұрын
Angle grinder artist- unbelievable. Your other stuff is also amazing, bending steel with a Hammer. Just amazing
@GavinClarkdiy
@GavinClarkdiy 10 ай бұрын
Thank you very much, I am glad you liked it. I appreciate your comment.
@davidfrost3989
@davidfrost3989 Ай бұрын
Wow, that was amazing to watch. The transformation was unreal.
@GavinClarkdiy
@GavinClarkdiy Ай бұрын
Thank you very much, I appreciate your comment.
@majranawake4240
@majranawake4240 Жыл бұрын
Superb - heavy metal work ended up with a soft product, thanks for sharing the video
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much, I am glad you liked it.
@dipensarkar8891
@dipensarkar8891 Жыл бұрын
Thats absolutely amazing. Beautiful. I personally use a piece of railway track as an anvil. But I never thought of converting it into a real anvil.
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much, I am glad you liked it. It could be a good project if you get the urge one day. Thank you for your comment. Cheers!
@BenjaminElam-z6b
@BenjaminElam-z6b Жыл бұрын
Only those who knows what it takes to be a welder can appreciate this. 80 prep 20 welding. This is a ton of work. Not only that what he's doing is akin to surgery with machete and coming out with scalpel results. If you try this yourself please don't be stupid. Your eyes, your body and most importantly your lungs need protecting. Especially the latter. The right tools do 0 good if the hands of the wrong operator folks. Well done my man well done
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much, I am glad you liked it. I appreciate your comment and good safety advice. Cheers
@roshanmangi8010
@roshanmangi8010 Жыл бұрын
Marvellous workmanship .
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much, I appreciate your comment.
@Maggioretom
@Maggioretom Жыл бұрын
Man! Your hands are like a CNC machine tool!!! You did awesome work! In my opinion maybe I would have cut less metal at the base to make it more stable, but you probably know it better than me. 👏👏👏
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much, I am glad you liked it. Cutting the base out was so I could make rings/tubes etc, and on the square end I can slip the small boxes I make over the end, so I can hammer each side, I appreciate your comment.
@CoastalEddieUSA
@CoastalEddieUSA Жыл бұрын
All that work done with a grinder...simply amazing!
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much, I am glad you liked it. I appreciate your comment.
@richardkatzman1215
@richardkatzman1215 7 ай бұрын
It’s a thing of art. Beautiful job.
@otaldogrifyn
@otaldogrifyn 5 ай бұрын
This is the best makita ad I've ever seen
@markhunter-om6fy
@markhunter-om6fy Жыл бұрын
Wanted to make an anvil for some time but all the other videos used milling machines or hack saws. Bugger that. I bought the 230mm Makita and got stuck into it watching your tutorial many, many times. The result was beyond my expectations. Not as good as yours but close. I'm very, very happy with it and learn many things along the way. Keep up the good work.
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
That is awesome Mark, it is only making things that give us more skills. Enjoy your new anvil.
@CarlWinter-oy8uf
@CarlWinter-oy8uf Жыл бұрын
Well it works super ! have welded 3/4 inch mild steel plate to the base of the rail /anvil you showed on the video ---adds weight and spreads the load ---- hit it really hard 2 dozen times --weld looks ok ----cut slots ---bolted it down onto steel table --- wear protective goggles ---just in case -(-spare eyes are not found in hardware stores )nice clear video ---thankyou Gavin !-----
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much, I appreciate your comment.
@tomeuler1979
@tomeuler1979 Жыл бұрын
I thought you'd use one of those big ass mills to take the top off. Couldn't believe it was all done with a grinder! That's a ton of grinding. I would've thought you'd drill the holes too. You worked magic with that grinder! Looks GREAT!
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
I am glad you liked it. Yes it would have been a lot quicker on the mill, and I could of had a coffee while I watched it, but I did it the hard way. Thank you very much, I appreciate your comment.
@jorgegodoy176
@jorgegodoy176 Жыл бұрын
Solo un artesano logra estos trabajos. Felicitaciones!!
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Muchas gracias, agradezco mucho tu comentario.
@startmicron
@startmicron 10 ай бұрын
a wonderful use for an old piece of rail. thank you for putting up this excellent video.
@GavinClarkdiy
@GavinClarkdiy 9 ай бұрын
Thank you very much, I am glad you liked it. I appreciate your comment.
@garrysmythe
@garrysmythe Жыл бұрын
Brilliant, you are a very skillful and resource metalworkers, woodworker, I'm just working myself through your videos, thanks for posting from Garry in the UK
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much, I am happy that you liked it and I appreciate your comment. Greetings from Australia.
@harvest-k2t
@harvest-k2t 4 ай бұрын
Very nice, You're an Iron Master. Congratulations from Brazil. 🇧🇷
@GavinClarkdiy
@GavinClarkdiy 4 ай бұрын
Thank you very much, I am glad you liked it. Greetings from Australia.
@roberttompkins9991
@roberttompkins9991 5 ай бұрын
DAGBURN VERN! That’s a lot of work! Beautiful end product. Makes me wanna find a railroad track and an acetylene torch!
@jaimesilvaf.401
@jaimesilvaf.401 Жыл бұрын
Loved the final result. As well as the working process of course.
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much, I am glad you liked it, and I appreciate your comment.
@sxia1190
@sxia1190 Жыл бұрын
This is great, i use many of the same techniques removing bits of steel and creating curves when adapting 2nd hand axes from lumps of rusty chipped pitted steel into Early Medieval Bearded Axes and throwing axes. I thought it was just me and that I was probably doing things totally wrong but just making it work for me, but seeing you at work and reading some of the comments gives me alot of encouragement, thanks 😊
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much, I appreciate your comment. Making Medieval axes, sounds like an awesome and enjoyable thing to be doing, I wish you the best for your projects.
@kathleenfoster9887
@kathleenfoster9887 Жыл бұрын
Wonderful craftsman, this video reminded me of one I made 50 years ago after finding a book called The Making of Tools while killing time between class at Long Beach State University in Southern California.still one of the best small anvils I own. Please put a tennis ball on that point I you punt that anvil on a stump or stand a bruise is way better than a trip to the emergency room.
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much Kathleen, I appreciate your comment. It is good you still have your anvil and a nice story to it too, I agree with the tennis ball idea, I have rounded it over a bit now.
@frenchcreekvalley
@frenchcreekvalley Жыл бұрын
Very good quality work! You are much more patient than am I. If some of your viewers intend to use an anvil like this one for actual blacksmithing, I'd suggest that they leave a LOT more metal under the horn so it doesn't bend or break when turning large scrolls, hooks, etc..
@speedfreak8200
@speedfreak8200 Жыл бұрын
French, Obviously it depends on the task ... that's why he designed it the way he did, it fits his needs
@frenchcreekvalley
@frenchcreekvalley Жыл бұрын
@@speedfreak8200 That's fine with me. My reason for commenting is that, as a maker of a half dozen of these rail anvils, I felt the need to point out the newcomers to the craft of blacksmithing, who often need more substantial horns than this guy does, DO recognize the limitations of this particular implementation. In fact, I just recently put up a youtube video myself, where I address this exact issue of making a stronger horn..
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
A very good point to bring up, I only do small things on these, Flat bar with rivets, etc and round rod, making small steel boxes with flat bar around them with rivets, and I wanted to do some riveted steel tubes so I want the horn cut out underneath for that. I have been using a rail doing this for a while. It works OK for what I do. But I agree with you if it can be stronger it should be stronger, Thank you for your comment.
@speedfreak8200
@speedfreak8200 Жыл бұрын
@@frenchcreekvalley Bless Your Heart
@luisarmandopaz2724
@luisarmandopaz2724 Жыл бұрын
Hola gavin gran trabajo quedó de lujo felicitaciones💯👍👏👏👏🤗🇦🇷
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Muchas gracias, me alegra que te haya gustado. Agradezco tu comentario.
@fernandomaiolo5927
@fernandomaiolo5927 Жыл бұрын
Muy bueno Gavin.....muy buena idea. El problema empieza por conseguir un riel....excelente trabajo
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Muchas gracias. Estoy en Australia, Railtrack se usa para muchas cosas y a veces está a la venta.
@joeellison-z2n
@joeellison-z2n 3 ай бұрын
Nice work!!! With nothing but an angle grinder Im impressed.
@cokhithietcuong
@cokhithietcuong Жыл бұрын
Nice clear direction i have been looking forever for something like this, thanks for sharing!
@GavinClarkdiy
@GavinClarkdiy Жыл бұрын
Thank you very much, I am glad you liked it.
Making & Testing HEAVY DUTY Tool Extension for BIG D11 Hub! | Shop Made Tools
45:04
Cutting Edge Engineering Australia
Рет қаралды 1,1 МЛН
1940s Fisher Anvil Restoration - Making an Anvil Stand
30:45
Meine Mechaniker
Рет қаралды 1,6 МЛН
The evil clown plays a prank on the angel
00:39
超人夫妇
Рет қаралды 53 МЛН
Try this prank with your friends 😂 @karina-kola
00:18
Andrey Grechka
Рет қаралды 9 МЛН
1920's French Rowing Car Restoration | 'L´ETOILE CYCLO'
47:28
Mister Patina
Рет қаралды 72 М.
The most essential tool for your garage or workshop!
8:16
Home Workshop
Рет қаралды 9 МЛН
I turn a Railroad Track into an Anvil! Simple & Easy DIY - Homemade Anvil
10:11
my mechanics insights
Рет қаралды 37 МЛН
Making a large kitchen knife from an Old Saw Blade
17:40
BL Restoration
Рет қаралды 2,5 МЛН
Blacksmithing - Forging Swedish Style Hammers
22:58
Torbjörn Åhman
Рет қаралды 599 М.
I make an Industrial-Style Heavy-Duty Steel Workbench and Welding Table.
40:31
MY DREAM ANVIL!!!
15:51
Alec Steele
Рет қаралды 1,4 МЛН