I make a Large Rebar Industrial Style Handle - Door Pull Handle - 325mm (12 3/4 inches) Long.

I make a Large Rebar Industrial Style Handle - Door Pull Handle - 325mm long (12 3/4inches)
I use steel rebar to make a large Industrial Style Metal Handle using two different sizes of rebar, This is a large handle for quite a big door, I love the look of industrial furniture and all the decor that comes with it, and this handle has the look I like. I hope you enjoy my video of the rebar handle project, it was a lot of fun to make.
The wide flat bar is 6mm thick, 75mm wide, and 325 long. The top flat bar is 3mm thick 65mm wide and 315mm long. The small rebar is 12mm and the large one I believe is 24mm
The main tools used were a MIG welder, angle grinder, drill, and bench vise.
Tools / Supplies, I often use are.
Marking out Tools
Markal Silver-Streak Metal Marker Round: amzn.to/3mTJDHt
Milwaukee 4pk Inkzall Black Ultra Fine Point Pens: amzn.to/2WKKpeE
Milwaukee Inkzall Jobsite Fine Point Black Permanent Marker 12 Pack: amzn.to/3kHrXfo
Locking Pliers - Vise Grips
MILWAUKEE 10” Locking Pliers, Curved Jaw: amzn.to/3zzJH2u
Milwaukee 6" Long Nose Locking Pliers: amzn.to/3jyVLeS
Milwaukee 6” Locking Clamp Regular Jaws: amzn.to/3jB94eI
KNIPEX Tools Long Nose Grip Pliers: amzn.to/3ByD1SP
Magnets
Magnetic V-Pads Kit, Magnets On Both Pad Face & Bottom: amzn.to/3DCya4W
Mini Magnetic Fabrication Square Magnets Angles: 30°, 60°, 45°, 90°: amzn.to/2WN9Fkr
“L” shape Corner Square Magnets 12°, 90° & 60° Angle Setting: amzn.to/2YaZXsU
My camera set-up.
Canon EOS M6 Mark II Camera 15-45mm Lens: amzn.to/3DNnn83
VideoMicro Rode Compact On-Camera Microphone: amzn.to/3QkUBnK
Camera Tripod Vanguard Alta Pro 2: amzn.to/3yB8hP5
The Brand of the Drill bits, and cutting/flap discs, is "Alpha" If you can't get them at your local hardware shop, here is a link to Alpha Tools: alphatools.com.au
As an Amazon Associate, I earn from qualifying purchases. This means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make more videos like this one. Thank you very much for your support!
►►Subscribe to our Channel for more videos ►► bit.ly/2ULxLJog...
Always use all the correct safety gear, and use your tools safely, I am not a good role model for this.
Hope you found something of use in my video or at least found it entertaining.
Gavin Clark DIY

[@jaredallen1149]

Never ceases to surprise me how an artist can take common, industrial and sometimes even ugly things and turn them into uncommon, useful and beautiful works of art that have a very practical use. Still inspiring.

[@GavinClarkdiy]

Thank you very much, I am glad you liked it and I very much appreciate your comment.

[@kulibinAS.]

Привет не плохо выгледит молодец. Вот только не для Сибири зимой можно на холоде прилипнуть. Здоровья тебе и удачи.😁👍👍👍🤝

[@GavinClarkdiy]

Большое спасибо, я рад, что вам понравилось. Я могу только представить ваши зимы, и проблему очень холодного железа, желаю вам всего наилучшего. Привет из Австралии.

[@mircomasini9591]

Ciao Clark una maniglia porta bellissima non ti smentisci mai complimenti!!!!🇮🇹

[@GavinClarkdiy]

Grazie mille, sono felice che ti sia piaciuto e apprezzo molto il tuo commento.

[@andarilho.7.7.7]

Simple in essence, but wonderful in the end result. You are great.

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@dawnegan3984]

GAVIN CLARK I WILL HAVE TO LOOK FOR MORE OF YOUR VIDEOS I HAVEN'T SEEN YOU FOR SOME TIME LOVE TO THE FAMILY AND THAT LITTLE GUY I WAS GREAT FAN OF 🤣🤣🤣🤣🤣🤣

[@GavinClarkdiy]

Hi Dawn, I haven't put many videos up lately, I have had other stuff to do. We are all well, and my little helper is growing fast, it is great to have him here. Keep well Dawn.

[@diamantinohenriques4712]

Ok.

[@Oleksandr_2025]

Гарна ручка вийшла. Мені подобається ваша робота. Дякую за вашу працю.

[@GavinClarkdiy]

Дуже дякую, я радий, що вам сподобалось. Я ціную ваш коментар.

[@Almously]

Good to see another great and simple project.

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@travisfranks2826]

It’s amazing the things you can make with just the simplest of tools ! Hammer,pipes,grinders, files 😮just Love your work again AMAZING WORK! 👏👏👏😳

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@Produce9AE]

That's a neat base plate attached to that Gav & decent vise ya got on that bench!

[@GavinClarkdiy]

Thank you very much, I am glad you liked it. My new vise is awesome to use.

[@samuelgardiner6504]

Awesome Gav. Glad too see you back.Cheers mate

[@GavinClarkdiy]

Thank you very much Samuel, I have just had a lot of other things on, hopefully, soon I can get my act together and start making more videos. Cheers mate.

[@vasilistrimis8260]

Artworks that draw my attention and learning good things!❤❤

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@earlcavenaugh6459]

Nice work again Gavin!

[@GavinClarkdiy]

Thank you very much Earl.

[@DaxxTerryGreen]

Love it brother. You got a new vise!

[@GavinClarkdiy]

Thank you very much, Yes, a nice new vise, I am doing a bit of bigger type projects, so I moved my old one to another bench so I did not break it, I think this new one will handle what I am doing.

[@タマラ-d8m]

Master with golden hands!

[@GavinClarkdiy]

Thank you very much, I appreciate your comment.

[@komoru]

I have to admit, you "pulled" this one off quite nicely

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@tegimr]

Good to see another great and simple project. My 13 year old son likes to make projects like yours because you inspired him.

[@GavinClarkdiy]

Thank you very much, I appreciate your comment, I wish him the best on his future projects.

[@andrewc6385]

Gavin, i have been watching your videos for a while now. I can see that you have very good skills. Keep up the good work please. Thank you.

[@GavinClarkdiy]

Thank you very much, I am glad you like them and I appreciate your comment.

[@furikglobal2633]

Надёжная и брутальная ручка! Хорошая работа!

[@GavinClarkdiy]

Большое спасибо, я рад, что вам понравилось.

[@Kera.S.]

I’m 52 now,but when I grow up I want a playroom and grownup toys just like you!😂 I don’t know what crazy cookoo brained thing I would even make 1st given the opportunity to play with theses kinds of materials. I mean,there really isn’t a lot of limitations in structure. Watching you create with metal is so fun to watch, You truly are a metal artist!❤

[@GavinClarkdiy]

Thank you very much Kera, I appreciate your comment and wish you the best for your future projects, you are right there are not many limitations in structure.

[@estebanpichiur2925]

Excellent work. Greetings from Argentina

[@GavinClarkdiy]

Thank you very much. Greetings from Australia.

[@Hadassah-KaquoliMReno]

I love this handle, very awesome!

[@GavinClarkdiy]

Thank you very much, I appreciate your comment.

[@mohammedkhader3289]

واحله لايك 👍👍👍🕊🌺🌹🇸🇩 جمال الإبداع المستمر تحياتي لى كل حداد

[@GavinClarkdiy]

شكرا جزيلا لك ، أنا سعيد لأنك أحببته. تحية من أستراليا.

[@mohammedkhader3289]

@@GavinClarkdiy 🧢🧢🌺🌹🇸🇩🕊 تحياتي لك من أم درمان سوداني متابع بى شقف لى كل جديد 1\4\2023

[@Goalsplus]

Nice look. You have a good eye for proportions.

[@GavinClarkdiy]

Thank you very much Building Stuff, I am glad you liked it and I appreciate your comment.

[@scottgottfried]

Wow, you really are a rebar artist, that door pull would look great on any massive door!

[@GavinClarkdiy]

Thank you very much, I am glad you liked it and I appreciate your comment.

[@chrishayes5755]

that 1" rebar looks nice for custom gym equipment

[@GavinClarkdiy]

I agree it would look great, that is a nice idea Chris.

[@chikowhitey]

you've done it again Gav....great vid mate

[@GavinClarkdiy]

Thank you very much. Cheers

[@marekwieckowski7038]

Excellent Sir.

[@GavinClarkdiy]

Thank you very much.

[@engahmed4124]

Great and elaborate work. I enjoyed watching your work a lot. Greetings from Iraq

[@GavinClarkdiy]

Thank you very much, I am happy you liked it and I appreciate your comment. Greetings from Australia.

[@ricky450f]

So simple yet looks so good 👍🏼👍🏼

[@Samandcocoa]

Nice work. Always enjoy your work

[@GavinClarkdiy]

Thank you very much, I appreciate your comment.

[@garyjones2582]

I like this kind of stuff, good thing I subbed.. Another beautiful project Mr. R... Thx for bringing us along.. Take care my Australian friend...

[@GavinClarkdiy]

Thank you very much Gary, I am glad you liked it. Greetings from Australia mate.

[@samurai3330]

Nice Job Gavin. Greetings from Germany.

[@GavinClarkdiy]

Thank you very much, I appreciate your comment. Greetings from Australia.

[@samurai3330]

​@@GavinClarkdiy Hello Gavin. I watch all your videos. I'm from the old school. I used to be a pipeline welder. You don't need that many tools to build beautiful things. A welder, an angle grinder and a drill. That's enough. Wish you a nice weekend. Greetings Andi

[@АндрейБорода-р4к]

Привет с холодного Архангельска.Из ни чего,что то!Но в нашем климате это жесткий вариант.А вообще молодец,только лаком бы покрыть,чтоб не ржавела.

[@GavinClarkdiy]

Большое спасибо, я рад, что вам понравилось, да, он будет покрыт для защиты. Привет из Австралии.

[@regsparkes6507]

Nobel door pull indeed, Thanks again for showing us this 'how to' video Gavin.

[@GavinClarkdiy]

No problem at all Reg, I am glad you liked it.

[@regsparkes6507]

@@GavinClarkdiy I always do, Gavin.

[@foxwood67]

Looks great. I have long thought a rebar themed house would look cool.

[@GavinClarkdiy]

Thank you very much. I love the look of rebar and agree a rebar themed house would look cool.

[@FireoftheGreeks]

Those would look so good on a cabin or workshop Gavin! Thanks for sharing!

[@GavinClarkdiy]

Thank you very much, I am glad you liked it, I appreciate your comment. Cheers

[@Arteenhierronuevaatlantis]

Excellent and neat work as always in all your videos

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@EiderJChavesC2]

Perfect!. Thank you, Gavin!.

[@GavinClarkdiy]

Thank you very much Eider, I am glad you liked it.

[@joewhitney4097]

Very nice handle. Great video and build. Thanks for sharing.

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@bradleytuckwell4881]

I don’t know how I lost your subscription but I’m back in and all caught up. They way you shoot your videos makes it very therapeutic to watch and always interesting cheers mate

[@GavinClarkdiy]

Thank you very much Bradley, Welcome back to the channel. Cheers mate.

[@mypride8780]

Gavin, Hello, Finally! as always predict, accurate and very nice!

[@GavinClarkdiy]

Thank you very much, I appreciate your comment.

[@habipargimak1220]

It is very clean and has nice workmanship. Sources are well hidden. Congratulations.

[@GavinClarkdiy]

Thank you very much, I very much appreciate your comment.

[@joesmith1574]

That is so cool! I think it would look even better chrome plated. You can put this on the front door of a brutalist mansion, say the Casa Brutale.

[@GavinClarkdiy]

Thank you very much Joe, I am glad you liked it and I appreciate your comment.

[@KoaAlias]

Chapeau again

[@ajsironworks3937]

Awesome work

[@GavinClarkdiy]

Thank you very much.

[@dirtfarmer7472]

I’m going to make my own coffin & will use something of this sort for the handles, it’ll be interesting that’s for sure.

[@GavinClarkdiy]

WOW, nice idea, I hope you don't get to use it for quite a while. I wish you the best for your project. Cheers! mate

[@dirtfarmer7472]

@@GavinClarkdiy 75 here so I’ve got some time to go yet

[@johncapps5044]

Fine job brother

[@GavinClarkdiy]

Thank you very much John, I am glad you liked it.

[@miguellopezsiccha4457]

Noble corsel amigo.. eres un genio..!!! Saludos.. 😊❤ bendiciones.. muchos y éxitos.

[@GavinClarkdiy]

Muchas gracias, agradezco tu comentario. Saludos desde Australia.

[@mikep1085]

Another great job Gavin! :)

[@GavinClarkdiy]

Thank you very much Mike. Cheers

[@subr2404]

The product is not complicated, but the manufacturing process is on top. Super! As always, everything is neat and clear. It's a pleasure to watch your work. Greetings from Russia.👍

[@GavinClarkdiy]

Thank you very much, I very much appreciate your comment. Greetings from Australia.

[@Dmacs_fishingandfun]

nice work Gav

[@davidmanen5495]

Another great video, thank you!

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@firenbubble]

c'est une belle poignée, bien jouer. Merci pour la vidéo, tchao biloute =]

[@GavinClarkdiy]

Merci beaucoup, je suis heureux que cela vous ait plu.

[@luisvelasquez3216]

Love it. Would love to have that on my entry door.👌

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@gilviz]

Another high-quality and beautiful job well done. Best regards from Mexico 🇲🇽 👌🏻

[@GavinClarkdiy]

Thank you very much, I am happy you liked it. Greetings from Australia.

[@jackthomson73]

Awesome to see another Aussie killing it. I think I have the identical tools in my shed from kincrome square to Trojan vice grips. My dawn vice doesn’t look that good anymore tho 😂. Great video. Cheers from Mount Isa, Outback Queensland 👍

[@GavinClarkdiy]

Thank you very much Jack, yes all is going well, I try to use simple tools that many people may have. Yes, my vice is brand new, I had my last one for over 30 years and took quite a beating. Cheers mate from southern NSW.

[@mikekerr3242]

Another excellent video Gavin. Your Engineering skills are amazing.

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@jorgecortez3231]

Excelente pieza. Gracias por compartir su Arte.👍💪

[@GavinClarkdiy]

Muchas gracias, me alegra que te haya gustado.

[@patriots1needed]

Well done!

[@GavinClarkdiy]

Thank you very much.

[@MrBenabida]

Très très très belle vidéo. Merci pour ce bon travail 💪

[@GavinClarkdiy]

Merci beaucoup, je suis ravie que cela vous ait plu et j'apprécie votre commentaire.

[@MASI_forging]

Great work as always.

[@GavinClarkdiy]

Thank you very much.

[@mikewilliams-no9cm]

Beautiful videos

[@GavinClarkdiy]

Thank you very much, I appreciate your comment.

[@katbobyr]

Люди, умеющие делать подобные дверные ручки, наверняка могут создавать и империи, как государства. Люблю когда чугун и сталь. Мне это даёт ощущение земного долголетия, если не вечности.Работа на высоте.

[@GavinClarkdiy]

Большое спасибо, я рад, что вам понравилось, и я очень ценю ваш комментарий.

[@PaganWizard]

Your work is amazing, it combines an industrial look with elegance. Keep these videos rolling!!!!! GREAT VIDEO!!!!!!

[@GavinClarkdiy]

I am glad you liked it, thank you very much, I appreciate your comment.

[@noiseosoutros]

Thank you my friend

[@GavinClarkdiy]

Thanks for watching

[@davidhdez6066]

Espectacular !!! como siempre!!

[@GavinClarkdiy]

Muchas gracias, agradezco tu comentario.

[@duberc.alvarezb6713]

Excelente y detallado trabajo

[@GavinClarkdiy]

Muchas gracias, me alegro que te haya gustado.

[@raybeattie985]

Master class fabrication...awesome job sir!

[@GavinClarkdiy]

Thank you very much Ray, I am glad you liked it.

[@hernanmoreira7838]

Muy meticuloso para trabajar. Detalles muy finos🙏

[@GavinClarkdiy]

Muchas gracias, agradezco tu comentario.

[@Fhhcfsckus]

Excelente trabajo muy profesional

[@GavinClarkdiy]

Muchas gracias, agradezco tu comentario.

[@mr.ranyhomemade2466]

Hello Mr. Gavin Thank you for your Diy very interesting 😮😮😮 now you have a new Vise where is older

[@GavinClarkdiy]

The old vise is now on another bench in the shed, I have been doing heavier things on my youtube bench and I did not want to break my old faithful vice so I moved it, and bought a new vise for the heavy work.

[@adnacraigo6590]

Very nice.

[@GavinClarkdiy]

Thank you very much.

[@gcbhatt3371]

Good Work 🍎🍎

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@diegocorrea7722]

Excelent video, ❤

[@GavinClarkdiy]

Thank you very much.

[@macariobuenomenacho170]

Buen trabajo mis felicitaciones

[@GavinClarkdiy]

Thank you very much, I am happy that you liked it.

[@ronnyschleinig3347]

👍👍👍 from Norway

[@GavinClarkdiy]

Thank you very much. Greetings from Australia.

[@brumer333]

Que bonito trabajo lo felicito amigo se ganó un seguidor saludos desde Uruguay

[@GavinClarkdiy]

Muchas gracias. Bienvenido al canal, me alegro que te haya gustado. Saludos desde Australia.

[@diyohan2226]

Encore un beau projet 👍👍👍

[@GavinClarkdiy]

Merci beaucoup, je suis content que ça vous ait plu.

[@Figueiredo74]

Magnifique❤👍

[@GavinClarkdiy]

Thank you very much.

[@christopherdean2893]

Very cool

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@gustavofedericoruiz]

Excelente producto! felicitaciones por el trabajo! Gracias por compartir

[@GavinClarkdiy]

Muchas gracias, me alegra que te haya gustado.

[@pedroluciano7217]

Bom dia, como sempre mais uma otima peça parabéns o Sr e fera

[@GavinClarkdiy]

Bom dia Pedro, muito obrigado, fico feliz que tenha gostado, e agradeço muito seu comentário.

[@marcoacevedo6240]

What a cool build ,i love it .have you made a gate lach with rebar if not could make please make one,. A thanks from Texas

[@adrianocorreadonascimento9016]

Fantastic

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@adrianocorreadonascimento9016]

@@GavinClarkdiy you deserve.

[@dabogeyman6280]

Love them hidden welds, you have taught me well Jedi master 👌

[@GavinClarkdiy]

Thank you very much, I am glad you liked it even if it is a lovely weld I hate them on show. Cheers

[@venom82mlc]

Beautiful work. 👍👍 May God bless you and your family in Jesus’s name.

[@GavinClarkdiy]

Thank you very much, I am glad you liked it, and I appreciate your comment.

[@GilbertoMartinez55]

Olá Senhor Gavin, bom dia, bastante saúde e alegria para o senhor, e parabéns.

[@GavinClarkdiy]

Olá Sr Gilberto, bom dia, muito obrigado, agradeço seu comentário.

[@j.iturburu]

Hermoso trabajo, gracias...

[@GavinClarkdiy]

Muchas gracias, gracias por mirar.

[@limajunior2001]

Boa noite amigo, parabéns por sua bela arte, simplesmente inspiradora. Seu exemplo me motivou a montar uma pequena oficina em meu quintal. Fascinante seu detalhismo. Deus abençoe sempre. Lima Júnior -Recife PE Brasil

[@GavinClarkdiy]

Muito obrigado, estou feliz que você gostou e desejo-lhe o melhor para seus projetos futuros. Saudações da Austrália.

[@aminoyneog8092]

You are so amazing 🎉

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@viorsa8200]

Excelente proyecto Gavin muy bien desarrollado y mejor ejecutado, la cabilla corrugada elebada a la maxima potencia, el asa elevada al máximo nivel, en resumen " la perfección" enel trabajo, gracias por compartir sus conocimientos y experiencias maestro, un cordial saludo y por supuesto un merecido like desde Narón (Galicia)👌🤓😜

[@GavinClarkdiy]

Muchas gracias, me alegra que te haya gustado, y agradezco mucho tu comentario. Saludos desde Australia.

[@xanyppuk]

Мне нравится. Дизайн необычный . Стиль "гранж".

[@GavinClarkdiy]

Большое спасибо, я рада, что вам понравилось.

[@mead6754]

Your one handy dude

[@GavinClarkdiy]

Thank you very much, I am glad you liked it.

[@ailtonacr]

Parabéns pela peça, ficou muito bem feita. Saudações do Brasil...

[@GavinClarkdiy]

Muito obrigado. Saudações da Austrália.

[@jesusmarte1880]

Excelente trabajo

[@GavinClarkdiy]

Muchas gracias.

[@flavioherculano8778]

Talento e humildade. Parabéns ❗

[@GavinClarkdiy]

Muito obrigado, agradeço seu comentário.

[@da_Woody]

hey gavin! if u don't need this thing, i'll doing a new door for my shop... 🤣

[@GavinClarkdiy]

Sorry Simon, this one already has a future home. I think the new door to your shop should have an awesome handle made in your shop. Cheers mate.

[@da_Woody]

@@GavinClarkdiy 😂 it's ok! just joking, your ideas are so amazing...

[@nik8242]

Excelente!!

[@GavinClarkdiy]

Muchas gracias.

[@goptools]

Hi Gavin. Beautiful door pull. That must be a massive door! I really enjoy welding to rebar. You can put tons of heat into it to get complete penetration. Glad to see you back. I hope everything is good with you and yours. Thanks for the video! -mike

[@GavinClarkdiy]

Thank you very much Goptools, the handle will be on an all-steel door/gate so it should match nicely. We are all going well here, I have just had a lot of other things on, hopefully, soon I can get back into making more videos, as I do enjoy doing that. Cheers mate.

[@bur23]

Это самая чистая и простая красота.

[@GavinClarkdiy]

@@bur23 Большое спасибо.

[@torowazup1]

👍🏼👍🏼👍🏼👍🏼👍🏼👌🏼😎 It’s been a while Gavin, Hope all is well 🙏🏼📿

[@GavinClarkdiy]

Thank you Max, yes we are all well, I have just had a lot of other things on, hopefully, soon I can get my act together and start making more videos.