How to replace Spark Plugs and Air Filter on 05 Toyota Camry 2 4L

[@davidstephenson7194]

If you use a spark plug socket it should have a rubber washer on the inside that will grip the plug to remove it. You can also use a short piece of the appropriate size rubber hose to do this. Dropping the plug into the head can damage the threads on the head or the plug. I also recommend putting a small amount of anti-seize on the plug threads when you are installing steel plugs into aluminum heads, but be careful not to ove rtorque them or it can cause damage to the head.

[@gavrilovas1]

thank you David, great comment.

[@kali1547]

A video 9 years ago came through clutch! Knowledge gained at KZbin University 🙏🏾 Thank you for service 🫡

[@gavrilovas1]

KZbin is cool you learn a lot almost about everything

[@Brisensei]

I Love The internet THANK YOU FOR UPLODING THIS MAN

[@genuineimpulse9134]

Great tip on using the coil to get the plug out, but you should use it to put the new plug in gently. Thanks for the video.

[@gavrilovas1]

You welcome...

[@MultiWayland]

thank you i must do this this week to my 2005 camry ( god bless you ) you are very kind

[@Toya_the_Explorer]

I have the exact same car and need both of those replaced as we speak this was a two-for-one thank you.

[@shredded8482]

Same lol

[@zunich1]

Great video, thanks so much. I like your use of the coil. I will try that for installing the spark plugs so that I don't drop them into the channel. Cheers

[@susannasay7251]

If you use a "Spark Plug 5/8" socket it makes it so much easier and there is less chance of ruining the threads. I would never, ever just drop the plugs into the hole, it could change the gap and ruin the threads. The rest of the video is pretty.

[@Xomchieu262]

Why unplug the wires?

[@andyl9920]

@@Xomchieu262 so u have room to take out the ignition coils

[@genuineimpulse9134]

I cringed every time he dropped one. If you don't have the spark plug socket then use the coil like you did to get it out.

[@kriscaffrey4615]

Thank uou. Just what I was looking for!

[@GrandsonLogan]

I have a 2005 Toyota Camry XLE V6. Is it the same directions for the XLE V6?

[@gavrilovas1]

Different because engine is v6 but watching this video might help

[@mikekienholz6471]

dropping them in the tubes is not very smart...that's a good way to screw up the gap on the plugs or completely close them

[@fishcatbunnypig]

The connectors on my 2005 Camry XLE have little latches that came off when I pressed them and couldn't seem to remove the connectors otherwise. Now not sure how to put them back, since this was not covered.

[@gavrilovas1]

latches brake because of the heat..

[@edgardoamado7008]

Cool video ... Those r very popular engines .... Can u make a series on the 07 and up Honda crv? Or the 2.4 k motor in the Hondas ? Thank u

[@gavrilovas1]

will do.. i need those cars... will try to find them ;-)

[@daghost25]

Thank you for posting this video

[@smoothsmith1965]

when you said 5-8, do you mean 5/8?

[@gavrilovas1]

Yes

[@iansingsiansings2101]

Thanks for showing...

[@gavrilovas1]

;-)

[@trini_boi2414]

You do not drop the spark plugs in the hole

[@frankc4623]

Perfect job and well explained

[@christinabaca1990]

Good video, thanks!!

[@tomgocubs]

Thanks!

[@andyl9920]

No anti seize needed?

[@gavrilovas1]

I believe I made another video about antifreeze for this vehicle

[@bestcarreview5021]

Awesome 😀 😀 2005 Toyota Camry 25L review.

[@davehak2880]

Was that a cat meowing at 2:53??

[@gloppy101]

Excellent, thank you

[@justzaka4300]

thank u

[@gennadiyshubitidze3607]

SPASIBO LEXA

[@588158]

very good video!

[@gavrilovas1]

thank's...

[@charlesmcteer3234]

The way you placed the spark plugs back in are totally wrong and you run the risk of cross threading

[@gavrilovas1]

could be.... but i replaced spark already on more then 50 vehicles and never didn't cross thread...

[@todosube]

Too tight... Good video 4 bigginers

[@Mr._Lister_The_Sister_Phister]

Someone give this man some sunblock

[@gavrilovas1]

Sunblock for girls ...

[@danielmiller9147]

thumbs down because i cracked my plastic cover because he didnt show the steps to removing the rubber piece on the back of the cover.

[@josegallardo7660]

😃😃😃

[@fishcatbunnypig]

You just pull it straight up. But mine got twisted, do I could imagine how it could be broken.

[@AbelsGamingAdventures]

When your completely useless on your own 😂😂😂

[@gloppy101]

Excellent, thank you