GDDR5 RAM REBALL AMD GPU

[@simonharris4873]

It always amazes me how you can solder components like this without destroying them.

[@f1lab535]

Some components will get destroyed, but most of them can withstand high temperatures

[@endurofan9854]

yeah, me too, its like a marvel to me

[@mitas3484]

Because it’s a rock we taught how to think

[@koalapando]

@@mitas3484корпус пластиковый

[@BitHappyy]

@@f1lab535what do you do in the case of a component that would be destroyed? Is there a different method for sensitive components?

[@bluephoenix1525]

This is not nearly as easy as you’ve made it look, this is a great demonstration of your KSAs. Phenomenal work.

[@KingslayerBeforeDawn]

how does he make sure the balls are perfectly aligned with where they are supposed to be on the chip?

[@bluephoenix1525]

@@KingslayerBeforeDawn the outline gives you a rough area, it doesn’t have to be perfect because when the balls melt the surface tension will move the chip into the right spot assuming you have it mostly correctly aligned

[@KingslayerBeforeDawn]

@@bluephoenix1525 Oh I always wondered man. Thanks!

[@Keiuran]

KSAs?

[@bluephoenix1525]

@@Keiuran knowledge, skills and abilities.

[@Xododeadnight]

Me: How many flux do you want to use? Him: Yes

[@f1lab535]

🌹 🤣🤣🤣🤣🌷

[@gjallarhorn456]

Id rather use all my flux than breaking my boards or components and beung forced to order more and wait

[@spinaxchin]

You can never use too much.

[@alexaleardo]

Мне иногда кажется что у этого человека где-то стоит ведро флюса и два ведра паяльной пасты

[@mikefiggy8949]

у него 2 сына есть , один в рабстве на флюсовой фабрике, второй - на фабрике припоя ))))

[@user-lf1qu1ti6v]

Аахахахаха

[@docwiz]

This is a perfect video as to why flux is needed.

[@f1lab535]

You see the board and the chip got discoloured and turned to a brownish color, this would not have happened if i had more flux covering the board and the ram chip protecting them from direct heat.

[@endurofan9854]

really love it when the author himself knew what was wrong with what he do and teach the supposed one

[@Link3000XD]

diglett

[@burretploof]

I've seen processes like this so many times and I'm still amazed that solder and flux can "just" slide things into place.

[@f1lab535]

❤️ ❤️ ❤️ ❤️

[@jameslastname9171]

Never have I seen solder balls like that. I have only seen the solder paste applied to a template and heated.

[@fridaycaliforniaa236]

Same

[@ProfShikari]

Solder balls are fairly common in GPU components for the core and memory re-balls

[@kamilwolinski7739]

wanna see my balls?

[@f1lab535]

❤️ ❤️ ❤️

[@f1lab535]

@@fridaycaliforniaa236 🌹🌹🌹

[@ivanstefancic8938]

That little reball stencil template thingy is awesome 👍 all the little solder balls flying around the place 😅 The worlds smallest game of marbles lol

[@forwardsdrawkcab]

Not enough flux, man. Lol

[@f1lab535]

🌹 😁 🌷

[@vinylmodsmanitoba]

Never enough flux

[@mcpr5971]

imagine doing all that but then putting it on backwards

[@f1lab535]

🤣🤣🤣🤣

[@ProfShikari]

That is the least of the worries here… the SK Hynix chip is the horror story IYKYK ;)

[@06Angry]

another reball video pls

[@f1lab535]

Ok 🌹🥰🌷

[@twangyyy18888]

You make it look so simple and fast but it takes a long time and its tricky sometimes

[@f1lab535]

Yes, it takes 20-40 minutes and maybe more depending on the difficulties.

[@oPtiMuMpRiCe]

This work needs a lot of patience. May Allah be with you and bless you

[@f1lab535]

Thank you brother may allah guide you 🌷🥰🌹

[@user-kd6kt3pw1k]

Sangat menginspirasi untuk hidup lebih teliti dan kreatif

[@jordancoleman2402]

May Jesus Christ find his way into your hearts

Bro re-RAM'd the RAM

[@f1lab535]

🌹 😁 🌷

[@doublesnake18]

Videos like that makes work looks so easy, real life is not.

[@f1lab535]

Yes, you are right 💖

[@BigPanda096]

He needed a bit more flux, if you see he discolored the board a bit. If he used a little more flux to spread to take up the heat instead, it wouldn't have discolored. Only a minor mistake to be clear here.

[@f1lab535]

That happened thanks to my bad hot air station 😁😁😁

[@user-vx5yg1oq6j]

Работникам этого сервиса нужно все флюсы и припои покупать за свой счет, тогда научится экономно использовать!!!!! А эту работу сможет сделать ученик после 3 дневного обучения, тут нет ничего сложного!!!

[@f1lab535]

Да, брат, здесь нет ничего сложного, и это простая работа, но мне еще нужен флюс.🌹😁🌷

[@user-xz1ur9sr6i]

ты собака экономичная

[@najibkasim9102]

probably the best and hardest work

[@f1lab535]

🌹 😁 🌷

[@bestbuildpc]

amazing skills👏👏

[@f1lab535]

🌹 🌷🌷🌹🌹🌹🌷🌷🌹

[@user-eo9oj7wv8r]

Навыки чего ? Посадки пожелтевшего от нагрева говна обратно на плату ?

[@riccardorossini1794]

Good job, Man. It is not at all easy to perform the complete rework of a BGA IC totally by hand, only with Hot Air and without using automatic IR Rework stations or combined air and IR.

[@georgereynolds6022]

Tf this gotta do with Palestine?

[@kpridezzang]

Everything bud

[@user-adgsfh0408]

여기서도 빛나는 하이닉스. 진짜 메모리 반도체는 국내기업이 꽉잡고있긴 하구나... 비메모리 산업만 좀더 발전시키면 참 좋을텐데

[@AliceNine]

문제는 한국 기업의 많은 직원들이 회사 기밀을 중국에 팔고 있다는 거다.

[@Floofie_boi]

Fun fact the memory on GPUs is called GDDR And not just DDR

[@f1lab535]

I edited the title ❤❤❤❤ thank you 💖💖

[@Floofie_boi]

@@f1lab535 you are very much welcome. I'm glad to have been able to help. ❤️❤️

[@aarbamlel]

Que trabalho Maravilhoso!! Muito Profissional!

[@f1lab535]

❤️ ❤️ ❤️ ❤️ ❤️

[@christianmaxpicellicorrea5298]

Parabéns. Excelente trabalho. Não deixe a inveja dos compatriotas ofuscar seu trabalho. Parabéns 🎉

[@ulinkot]

Очень хорошая работа😮

[@f1lab535]

Спасибо 🌹🥰🌷

[@arrazi8625]

Flux really is a game changer in soldering

[@spinaxchin]

It's essential. You could not solder without it.

[@TheEleventeen]

I watched it continuously at least 10 times

[@maher5830]

اجمل شي صوت القرآن ❤❤❤❤

[@f1lab535]

🌹 🥰🥰🌷

[@philippossnortis2035]

❤

[@KarimBELGHAZI]

Wayeehhh

[@apple-ytff4275]

Reball with solder paste time will save❤

[@f1lab535]

Yes 🌹🥰🌷

[@sabahattinyakt5557]

eltronık tamir işlerini seyretmeyi seviyorum elinize sağlık.

[@f1lab535]

❤️ ❤️ ❤️ ❤️ ❤️ ❤️

[@luisflores3292]

I could do this all day.😮

[@Del0w_]

beautiful reballing

[@f1lab535]

🌹

[@Abdallah.795]

What temperature and air flow was used to remove and solder the vram. Plz let me know thanks

[@rachmanfachri]

This guy is (re)ballin'

[@nickst2797]

So you dont need a full reballing station? Because i have been told if you dont have a hot plate underneath, to provide temperature evenly, the heat from the heat gun will damage the board.

[@f1lab535]

I have a bottom heater but i dont use it, instead i just pre heat the board during the process before focusing the heat on the ram chip

[@nickst2797]

@@f1lab535 Thanks!

[@user-cr9xj9sp4e]

Опять этот любитель флюса

[@ArmpCS]

I'm glad that the memory which was reballed is korean memory 🇰🇷

[@f1lab535]

Very nice, i did not know it was made in Korea 🌷❤️🌹

[@petevenuti7355]

If you know someone with a laser cutter and happen to have a few strips of that really thin stainless, can you have them make those stencils? I mean is it a downloadable file?Or do you have to go crazy with a micrometer precisely measuring. Or is there some software to turn a PNG into gcode?

[@andressosa1]

You need a lot of coherence in a láser focus to do that , but its posible.

[@petevenuti7355]

@@andressosa1 it's like a professional $10,000 unit I'm sure he can do it, from foil to 1/4 inch steel. Question is can I download a image or file to give to him or do I have to make a lot of super accurate measurements?

[@f1lab535]

@@petevenuti7355 the template that you have to do will depend on what the laser machine accepts, ex: it requires a corel draw file or an image file, the owner of the machine can tell you.

[@turolretar]

Can’t you like etch this template with chemicals? You know, like PCBs?

[@petevenuti7355]

@@turolretar its a sheet of springy stainless steel, it's very thin, but it's not copper foil. Might get a rough and dirty version with nitric acid to dissolve the steel. But it's sounds so messy I don't want to try.

[@timhnartiel]

Dang, that's some dedication 😅

[@existingevil]

I have a question that i hope sometime can answer: Why resolder the board if you're just going to wick that clean solder back up?

[@f1lab535]

I put low melt solder paste 183c or 138c, to mix with the old factory solder, it will lower the melting temperature of the factory solder, and help me remove it with ease and avoid ripping pads, you need to try it yourself, with low melt solder, and without, and you will see the difference.

[@Catspawsdose]

“And … Oh, I got to tell you, it was perfect. Perfect! Everything, down to the last, minute details” (c) Homelander 😂

[@ssasppn0834]

How do you keep your hands so steady like that?

[@f1lab535]

They are not steady, my hands are shaky but when you move its not really visible 🌹🌷

[@EPA-NOOSPHERE]

Работа профессионала

[@MrDarkside1355]

Bro fluxed the hell at out of that board

[@f1lab535]

🌹 😁 🌷

[@KerbalLauncher]

Dragging the solder wick around like that can tear pads

[@volodimirsci]

Сперва сделаем продукт из низкопробных микросхем памяти, сэконимив на охлаждении, заставим их работать на грани. Потом распустим слухи о майнинге на видеокартах. И в финале реболим эти чипы небесплатно.

[@lafix2341]

Ты только сейчас понял, как устроен современный бизнес?

[@dik-007]

зачем здесь этот комментарий

[@danny_racho]

Wow that's crazy. I didn't know you need special stencil for BGA soldering. So if I have a large PCB, do I need to do a special stencil for the BGA parts or did you only do it here?

[@jdm2269]

I.... I need this job...

[@f1lab535]

🌹 😁 🌷

[@user-bj8se2me5o]

BGA Be That Easy! Wow😮

[@jimechols4347]

Looks a bit like you're working at a fast food restaurant 😊

[@Bobsmith-yf9oy]

I'm not trying that at home. Not nearly as easy as it looks.

[@f1lab535]

😁😁😁😁 Dont put your gpu in the oven

[@user-ow1rj5qo2o]

Песню вспомнил, гимн ребола: сектор газа - шары😂😂😂

[@antistopham777]

это вышка! даже не пытайтесь без опыта

[@restlessdragon]

Flux, Malla desoldante, Estacion de Soldado, Cinta Kapton y una buena Lupa y si tienes buen pulso eres un "Cirujano" electronico, q rico el olor de la resina al desoldar, lamentablemente nunca pude dedicarme a eso y solo de vez en cuando lo hago de hobye para reparle el celu o alguna q otra tablet a mi hijo, pero es hermoso!

[@user-zy9ul8bh9t]

Это ремонт, а на заводе 🤖 делает всё сам!🙋

[@antseigar2435]

я бы этому пайщику и метлы не доверил бы 🥴😵‍💫

[@f1lab535]

Почему? 🌷😁🌹

[@ThePhoenixAscendant]

Doing this job takes a lot of balls...

[@dunckeroo1987]

The replacement balls are probably a better alloy than original.

[@jordancoleman2402]

Takes some big balls to deal with those little balls 👍✌️🤙

[@yusufhamad9884]

That quraan in background is ❤

[@f1lab535]

🌹 ❤️❤️❤️❤️❤️

[@Astakun8800]

I came to the comment section to make sure it was

[@arkoz_6058]

@@Astakun8800 same lol

[@samedyalcinn]

hypnotizing

[@rodiculous9464]

All these board repair videos be like take off the doochickey spill goo on it dry it off spill more goo dry it off spill more goo move it around spill more goo dry it off spill some alcohol dry it off

[@f1lab535]

🤣🤣🤣🤣🤣

[@codynorman7744]

Amazing

[@f1lab535]

❤️ ❤️ ❤️

[@lrrrofomikronparmaside8904]

True art.

[@f1lab535]

❤️ ❤️ ❤️ ❤️

[@luzzx2184]

too satisfactory

[@f1lab535]

❤️

[@matias_kamissani]

Why in some cases is recomended to use soldering balls and when soldering paste?

[@f1lab535]

Its up to you, for me the only differences are melting temperature and the workflow.

[@maluszek892]

Wow. Not expected. Same chip?

[@Skylane182R]

Recuerdo los tiempos que poníamos una pinza de aluminio a las patas de transistores, pues la temperatura de soldadura lo destruía. Como ha evolucionado 😂

[@Smiga-Driga]

Это просто мрак... Куда столько флюса? Зачем паяльной пастой собирать припой? Так делать не надо.

[@billnoname8093]

brand new ddr5 and it already needs to be fixed, most everything is junk nowadays , of course this could of been from someone trying to do something foolish

[@user-mt7cn3ci7x]

القطعة النقدية الظاهرة هي نصف دينار جزائري تم إصدارها سنة 1992 و توقف اصدارها في نفس السنة بسبب التضخم

[@RedRingOfDead]

The people who can sit there and reball anything are saints. Well done 🫡🫡

[@user-wp4et4jz8d]

Все отлично, но мне кажется нужно больше флюса😂😂😂😂

[@aziaev]

This is crazy type of surgery

[@f1lab535]

🌹 🥰🥰🥰🌷

[@SpenceReam]

Ballin’ 🤙🏻

[@sander2443]

Зачем ты добавляешь олово на плату? Эти пины можно ведь и без уменьшения точки плавления заводского олова оплёткой снять, не перегревая саму плату

[@doyouliketacos7809]

I would have just bought another set

[@MBLX555]

Dios su nivel de soldadura es más de 9000

[@Walker-cw3ms]

Ребята флюса льют прямо не жалея:)

[@f1lab535]

🤣🤣🤣🤣

[@0m1d]

I think he forgot to use some flux

[@andresvaldevit3692]

I’ve always wondered how is this type of repair even feasible outside a factory. How is it possible that not even a single microscopic drop of solder spills over the next contact, literally 1/10th on a mm next to it and fucks up the whole thing??? And he just soldered blindly a chip with a couple of dozen contacts face down

[@spinaxchin]

Solder is very attracted to copper (and other solder). It's kind of hard to explain unless you've worked with it. It's the same concept as surface tension with water. With enough flux and a clean PCB (and lots of practice), you can resolder pins on an integrated circuit simply by dragging the soldering iron tip across the chip leads.

[@JbVest]

I had no idea you could reball with little balls of solder How have I never seen that before usually I see people put paste over it and scrape.

[@ljsifszo]

the chips were made in Korea

[@f1lab535]

❤️ ❤️ ❤️

[@SomePotatoChannel]

Looks like a cooking video

[@abdelrahmansamir1380]

Masha'allah, my Muslim brother

[@f1lab535]

🌹 ❤️❤️❤️🌷

[@миха86]

Без нижнего подогрева?

[@vitaliy7518]

Нет, в том что здесь нахрен не всралась паяльная паста!

[@RenatTatarin444]

Маловато флюса, нужно в флюсовой ванне купать детали и паять

[@gushenkai]

It is rediculous to do the reball directly on the main board. What happens if any loose solder ball melts on the main board at the worst place?

[@user-pb4qj5ck7k]

Флюса много не бывает😂😂😂😂

[@f1lab535]

🌹 🤣🤣🤣🌷

[@f2phonkai]

Can you tell me what causes chip pin errors?

[@f1lab535]

Cold solder joints

[@ko3ak112]

They call him mister-flux

[@CIPHERFLEX]

What's with the bronze age shitpost music in the background

[@f1lab535]

Its quran not music

[@sevensoulsmovies]

Ходят слухи что он до сих пор реболлит чип

[@alfonsobazan5296]

Parace tan fácil.....ya lo intente compré las herramientas pero fracasé

[@Bobsmith-yf9oy]

I haven't got the tools and not tried it - but I would have failed...

[@ilyestanki7618]

Are you Algerian? I'm asking because of that 1/2 Algerian Dinar coin you used.

[@eros5420]

I mean that's awesome but why do you keep doing it over and over again?

[@f1lab535]

Just for your satisfaction 🌷😁🌹

[@eros5420]

@@f1lab535 ❤️

[@dreambig121]

Waste of money if upgrading for performance Can not get real results like original and will face many other issues or bad bad performance and other issues

[@poind3xt3r4]

Runescape noises

[@transgrl]

Why did yog pour the solder balls over the pcb 😨

[@f1lab535]

Its not solder balls, that was salt 🌷😁😁😁😁🌹