GE dishwasher lower spray arm removal

How to remove lower spray arm on GE Dishwasher model GSD4060n10ss.

[@jasonhayes9776]

Thank you. Twelve years later this video is still saving people's lives and sanity. Today, it was mine.

[@theanonymy]

You, Sir, are a gentleman and a scholar! I nearly ripped the thing out by hand....then thought better of it and started manual searching. Which gave me nothing. Wound up here. Happy now. ;-)

[@bullfrog0403]

At 1:03-1:04 you can get a glimpse of the lever you need to get to. Very helpful video, thanks!

[@rstampfle]

Great video! I attempted to remove the spray arm for 30min before seaching the internet...and within 3 mins I had the arm removed! Thanks for the video!!!

[@Teviko]

Thank you so much for posting this. I was trying to clean some foriegn material from the strainer, but couldn't figure out how to get the spray arm off to access it.

[@bmead2058]

How'd you get the filter out?

[@yaelcamacho7788]

Thank you sir. I looked at other videos and none explain how to take the spindle out,they justt showed taking it out but left out the part that there is a clip handle behind. I spent 30 mins trying to figure it out,until I seem your video.I was about to make the mistake of using force to pry out the spindle. Thank you.

[@99coconuts]

Thank you so much sir you are a blessing. We’ve been working on our GDS7100V70WW for a couple days and we could not for the life of us figure out how to detach that sprayer arm. Thank you so much.

[@finagint3646]

Just spent a whole day trying to get the arm off, within 2 mins of watching your video I had it off, THANK YOU!!

[@vannessagreenleaf8724]

Thank you!! Worked with my GSD3360K all these years later

[@lisavolk9493]

They couldn't have put that lever on the front. Could they.

[@tryinification]

@tomgamon I was stumped too, I talked to some appliance repair people and they told me "turn it counter clockwise and pull up" I finally crawled in there and saw that leaver. Once I found it, it was simple. I'm glad it helped you out.

[@melindacleveland8875]

The little lever broke? What can I do now? Doesnt it mean the sprayer arm wont work now ?

[@qjoannag]

I will echo all the other comments on here, this is my sixth video of the day and the first to ACTUALLY show what I’m supposed to be doing w the flat head! All other vids it just magically snaps out and they carry on, TYSM!!!

[@HzG8rGrl]

I needed to get one off today and could not figure it out-Thanks man-tomorrow will be a better day because of you!!!!!!!!

[@kstender]

Thank you!!!!!!! I could not figure it out and this video saved me so much time and hassle. FYI this is also applicable to the Hotpoint HDA2100N00WW

[@dank2059]

Excellent Video. I have a GSD2400. Spray arm easily removed. Really want to remove that filter to really clean it off (mine is very gross). Do you have a video which goes into that part? Or a link to how to remove it? Would LOVE to see that. Thank you so much.

[@Crazkid28]

Did anyone ever find this?

[@Iraqveteran-ke6qu]

Thanks for the video. I almost set my dishwasher on fire 🔥.

[@tyleralbrecht3132]

I owe you a beer. I could not find a manual for my HotPoint dishwasher and it is identical to this.

[@mosiprop]

Awesome. Thanks !! GE service manuals are useless, but your vid helped greatly!

[@nonya7074]

Ok so my lever snapped how do I remove and replace that part that has the lever???

[@andresortiz158]

Thank you I have a little trouble to find out how to pull this part out.very helpful.

[@xxsekoxx]

Thanks for the video, very helpful. Dishwater was not cleaning very well so when i took out the spray arm i noticed either build up or some plastic pieces in both ends blocking the end holes. Haven't tested yet, but should solve my issue.

[@jtannenba]

Finally, Thank you. I have a GSD1300N00BB that come out that way. I spent way too long trying to figure this out. GE had so many ways of doing this, that finally finding the correct way is a relief..Thank you

[@BS-sr1dn]

omg that worked for my dishwasher too! This was a great help!!! Mine is a GE2304k000. On mine there are 2 wee tabs on the arm that you need to jut pull out a bit and then the arm snapped right out. Be careful though, mine is an older washer and the tabs are plasic. As plastic ages, it gets more brittle and I almost snapped a tab right off but I think it will still be ok.

[@princephillip14]

Thank you for the video it was very helpful. I only have one question though if your spray arm filters underneath the spray arms are black, do you need to clean them? If so how?

[@olstar18]

Wrong model but it helped me figure out why I couldn't get the sprayer arm loose. Mine had a tab on the front to hold it in place and I didn't think there could be one in the back as well. Not the best location for it.

[@michaelbeetham2660]

Thank you Sir, It is criminal what these companies do to milk money from their customers. Anything I buy new won`t be GE , that is probably why they are having bankruptcy problems.

[@mlmspohr]

thanks helped me so much! haven't had dishwasher for a month because i couldn't get -afford someone to do a service call. BTW mine is hotpoint but exactly the same configuration.

[@brianfranetovich6973]

Thank you! You are so awesome for posting this, I never would have found the lever

[@milesmseybert]

how do you remove the lower receiver that is the spray arm snaps into?

[@ACollins6158]

Thank you for posting this, I was able to diagnose a cracked spray arm/remove and replace it with your help!

[@moneyhungry2020]

Thank you soo much! I have tried to take this apart 5 times and was getting really frustrated trying to figure out where the noise came from.

[@kellyreader6885]

Thank you so much!! We some how got a butter knife down in there and I was going crazy trying to figure out how to get it out.

[@Azaz3ll1]

Just saved our a** ! Thank you so much for posting this video! Great work!

[@MikeBarr444]

Was getting frustrated with my GSD3300N20BB. This is exactly what I needed! Thank you!

[@pictureBigger]

bummer. i should have watched this before the lever broke. is the cylinder head that has the lever (holds the sprayer) replaceable? doesn't look like it. new dishwasher in order?

[@User31178]

I broke mine a few days ago as well. I found the parts online but seems like the whole DW needs to come out to replace that from the bottom up. WD12X10244 was the part I found - Anyone know cost of having someone replace this for me?

[@JenSiegeltube]

Thank you so much!! Could not have figured it out without you!!!

[@mikegleave13]

Thanks for refreshing me on this. Been awhile since I've done one.

[@origins2437]

Thank you! I was taking off bolts and I said damnit lemme KZbin this lol.

[@bongbreaker7404]

THANK YOU My Neighbor ! ... GSD4000R00WW GSD4000ROOWW GSD4OOOROOWW ... The Little Leaver Clip Also Has To Be Pulled Back When Removing The Meshy Filter Thingy On My Model.

[@billworley7344]

Man, you just made my day. Thanks!!!!

[@rox.ie.g]

Thank you! Just replaced mine thanks to this video!

[@tryinification]

@stavorgen My 7 year old was holding the camera and directing, you can hear him saying "tadaa" as we were finishing.

[@Tule987654321]

hi i have the same dishwasher like that and i cant get it to be working i dont know what is the problem i havent use it in 2 years so i dont know how to use it it might be broken or i didnt do it right

[@fgaven]

I love that 23000 people saw this. Thanks, i was going insane!!

[@valeriewilliams5165]

Thank You, I was struggling. :)

[@mightygreenm]

Thanks this is just the info I was looking for.

[@SeattleRingHunter]

I bring you case of beer thanks bro! I just want to check my catch screen and this top rotating spray arm has to come off fist.

[@easylistening66]

Thanks bro Your knowledge helps out a lot

[@ritaberaro3282]

It worked except I broke the clip at the back when I was prying it with a screw driver. How do I fix that?

[@robwomack3481]

This was extremely helpful. Thank you.

[@dragonlady1850]

We have a gsc3500r20ww and this helped. Thanks!!!

[@TheDriveThruLife]

Thank you. That helped make my Saturday a little less stressful.

[@denrop]

This was golden. Thanks!

[@nikkibrown7155]

yay thank alot for that info.....my boyfriend could not figure it out.....so i got on you tube seen this video and than i went and done it myself...lol i showed him

[@mariadefalco2850]

GSD4800J UNFORTUNATELY THE LACH FRIGGEN BROKE IS THER ANY WAY TO REPLACE THE. LATCH WITH SOMETHING HELP

[@beckyrich7516]

Thank you for this!

[@tizbrin]

2 -3 inches of water will not drain from dishwasher bottom..how do I clean this??

[@abirdinthecity]

Thanks! needed this!!!!! About to break this dang thing.

[@Quadstriker]

Thank you very much. I might have been there all night.

[@tryinification]

no problem, I was supprised how simple it was once I fig out how to do it.

[@mistershivers8887]

Thank you helped so much

[@KeithBlade]

Thanks, that's a huge help

[@rhlogic]

Man! This is genius!

[@alfredwong9388]

1:29 Ta-da............... Thanks! i almost broke the spray arm if it wasn't for this video

[@ThaLadyDorian]

Thanks, dude. You're a lifesaver.

[@McSmacks]

Thank you so much!

[@jelowery2]

Thank you, thank you, thank you!

[@richardreeve6100]

thank you - so easy when you know how!

[@jbeanburrito]

Thanks. I almost took the whole thing apart.

[@bonn1771]

great video thanks for helping it out!

[@allenxav4754]

Thank you!

[@mistyblueworld3773]

TYVM! ❤

[@devinbrooks5603]

Thanks!

[@isscotty2hotty]

Thanks bud!

[@agentsarahjane]

Thanks a million!

[@IsaacAndDaddy]

I have no clue what I am doing and I can’t see anything in this video

[@aConcernedHuman]

THANK YOU!

[@stavorgen]

Spielberg look out you have competition

[@Bipets2001]

Thank you!! :)

[@jeannettekantzalis]

Thank you!!!!!!!!!

[@pictureBigger]

got it. part 451

[@richardlampley8831]

Thank you! Lol!

[@lhrjfk2000]

So dumb to have it in the back. I still cannot find it

[@mercertj]

Pliers were much more useful IMO. Why would you use a screwdriver?

[@jongeorg]

Thank you!

[@JayDaGreat85]

Thanks!

[@Tymyshoe2000]

Thank you!