Ge washer noise. Transmission and brake replacement
Пікірлер: 57
@jbs5293 Жыл бұрын
Thank you - THANK YOU, your great video saved me a lot of time. If you view GE's repair guide I would almost disassembled the entire washing machine. The new gearbox didn't have the mounting holes for the shield by the motor, possibly a change in the gearbox housing style - or the forgot to create the screw holes in mine! Once again, thx!
@loisyoung23722 жыл бұрын
Note to this great guy's family or friends looking for a wonderful Christmas gift, drill/impact driver will save his wrists from carpal tunnel!
@c.a.nationwide Жыл бұрын
Manufacturer recommends not using power tools
@dragor6527 Жыл бұрын
@@c.a.nationwide fuck the manufacturer
@intelin123 Жыл бұрын
Wait till you find out carpal tunnel and many other deseases are given to us by the yearly flu shot
@alchemy12 жыл бұрын
Utterly wonderful and thank you for going out of your way making a video of it. ( Oh before I forget, there is no "brake assembly" on this, just what they call "Gearcase"). while you simply laid the whole machine on its side and even keeping the suspension in place, I place the whole basket on its head. Me being an ambitious nut ( even in my old age) I take the gearcase apart and replace the bearing and the seal, a $20 value and a bunch of work as you can imagine. :-)
@frenchonion4595 Жыл бұрын
You replace the bearing and seal on this unit ? Where did you get the seal ? Do you have press the bearing out ?
@alchemy1 Жыл бұрын
@@frenchonion4595 I don't think you will find anyone on KZbin that will go that far to do what I have. Then again I have done all kinds of other things that no one does either. I am more into fixing things than replacing them. And for a reason and it is not economics either, although of course you save money in exchange for your time plus extra extra time to figure things out as there are no "corporate instruction" due to intellectual property rights........ I repair door lock switches, clutch actuators, suspensions and trace problems with control boards. I modify some machines so they work better but that is another story. There are other hidden problems that most people have no clue about at all. And the experts , so called experts are parts changers. They have no clues about what is really going on. You see, you realize that there is no parts listing...( of course not), for the bearings and the seals. Why? They make more money selling you the whole thing. Plus they pay them chinese folks nickle and dime making the machines. But you have to realize that a bearing is a bearing. A bearing is not some unique breed, some especialty item. That would be like saying a tire is a specialty item. It is not. Neither is sealing. A bearing is recognized by three numbers. inner diameter, outer diameter and thickness. That is it. And so is the sealing. Are you sure you want to get miserable and go that far and taking the crap apart? ( I do things for spite. I do things to remove the cobweb out of my eyes. I go to the point that I make the transmission). I find it criminal that a person has to spend from $40 to $100 replacing the suspension rods or the front loaders suspension struts, seeing that it can be repaired actually free. While the monkey see monkey do experts are experts at how to remove some bolts and install another one and walk around beating their chest like you know..... grape..... It appears that you are not concerned about doing what it takes to take the so called gearbox ( I call it a tin can box. It really is) apart but you are wondering where to get the bearings and what is involved in removing them? Is that really the case? ( And there is another thing, not a big deal for me... you can find the seal and the bearing but there is a race you can not find but you can make your own. The race sits right above the top bearing and basically it is there so the seal has a smooth surface to ride on. The seal can not ride on the transmission outer shaft housing. It is not smooth enough.) If you want to do all this. I will tell you the detail and will save you a lot of suffering.
@frenchonion4595 Жыл бұрын
@@alchemy1 . I know you can go on McMaster Carr etc and find the bearing's etc i was just wondering if there was a kit etc but yeah it was stupid question considering the thing is spot welded together also time is an issue. I don't know if you have a lady in the house, but it doesn't take long to feel the wraith if they don't have a washer running
@alchemy1 Жыл бұрын
@@frenchonion4595 There is no welding going on there. Just rivets. Drill them out and then install simple little screws, lock washers and nuts. The bottom bearing hardly is the issue. It is the top one that takes on a beating due to seal leak. All these type of washing machines are of the same type. They all have the same size bearing and seal. I have a bunch of these already fixed up. There are 3 Maytag/whrilpool/Kenmore/Amana type. And one General Electric. There are only two types, GE and the others. The only difference between the two is just the bolt pattern and look of the casing. If I remember right, the GE has more robust gear mechanism itself. But nothing goes wrong with them anyway. GE doesn't leak oil and the others do so you have to do more with the others, the whirlpool types. With them I drain their oil completely by unbolting that gear can. Then I just pump suspension grease instead. And that ends that nonsense. I no longer mess with these things. I was doing it just for experience. I got bored after 3 years. Now I have these left over stuff all over which I am about to take them to the dump.
@frenchonion4595 Жыл бұрын
@@alchemy1 I got the GE and its leaking oil. Got on the belt and making it slip.
@khabeerabdool51742 жыл бұрын
I have the exact model machine spinning not agitating. Made a loud noise 1 time nothing there after. There is also a huge displacement of oil under the machine.
@1922DPenny2 жыл бұрын
Pretty much same thing with mine
@danbrooks2542 жыл бұрын
What size nut are those that is holding the pulling in place
@lukelesperance22962 жыл бұрын
Can you replace just the clutch? Or do you have replace the whole assembly?
@teddybearopposum41614 ай бұрын
Engineered Obelesence by GE. Shame on GE for making JUNK transmissions. Im on second GE washer. Hope it last longer than first one. Thank you for video, im gonna try to fix my broken one. Great video.
@AndrewARGO4 ай бұрын
It will not last. GE sold appliance field to Chinese company Hair. All GE appliances are made by Hair now…
@ryanhartkorn29392 жыл бұрын
How did you get the pulley and clutch off? It showed you prying and then it went to a different clip
@1for4ll2 жыл бұрын
Pulled out with big flat screwdriver Nothing special tools bro
@kevincannava30882 жыл бұрын
No lube for tub seal?
@thaflame842410 ай бұрын
can you replace just the bearing?
@tammythomas10810 ай бұрын
How do you know if it's the transmission that is broken? My GE is just like this one and the agitator doesn't work. How can I tell if I need a new agitator or transmission?
@MrsEagle10137 ай бұрын
Did you figure it out? Mine is doing the same.
@user-ef5fb2oh7n9 ай бұрын
Tengo una igual , el Clutch está gastado y también el drive pulley , suena fuerte mientras da vuelta , puedo cambiar el clutch oh necesito toda la transmisión
@opinion1625 Жыл бұрын
how much could this job cost? is it worthy repairing than buying a new washer?
@studyallthetimeallthetime84732 жыл бұрын
what kind of noise was it making?
@1for4ll2 жыл бұрын
The gears loosen so making sound when spinning
@shilohmcrae9862 Жыл бұрын
Was it a loud grinding noise on wash cycle?
@homeguestunton Жыл бұрын
Was it a bearing?.
@JuanMartinez-mf5bm Жыл бұрын
Good video ! Minute 11:30 hope doing good your hand 👌
@tedthornton7791 Жыл бұрын
It must have still been under warranty?
@1for4ll Жыл бұрын
Yes sure ,but my country out of coverage
@ttc30042 жыл бұрын
I hope someone can help me. I have a washer that I am unable to turn the coupler on the transmission clockwise it will only turn counter clockwise BUT with motor and transmission out of washer both spin freely. Since I am currently unemployed I have to determine if its the transmission or something like the brakes dragging or basket drive assembly. i noticed the cam has no play outside the washer but while turning the basket drive assembly counterclockwise to get it back up into the washer it is difficult maybe its supposed to be? Also once in the washer there is alot of play in cam. One other thing I noticed was once the transmission was in the coupler would spin clockwise a little bit but not enough to turn the tub then I would hear a click and it wouldnt turn anymore and it never turned far enough for the tub to spin. Is that click something locking up with the brakes or in the transmission? i disassembled the brakes took of the spring to make sure they move freely. There was no play in the brakes so they seem okay to someone who doesnt know what they are supposed to feel like. Also we replaced the transmission fluid with 90 wt. Ugh someone please help we have been watching videos and searching the internet for a week. We replaced the capacitor before figuring out it was bound up somehow. thanks in advance for any help you can give.
@1for4ll2 жыл бұрын
Can i know the model your washer
@justdissin73402 жыл бұрын
I got the same style & it makes grinding noise only when agitating. What could it possibly be? Maybe pulley?
@jordanchristie96272 жыл бұрын
If it's only when agitating and not when the basket is spinning, it's most likely a worn out or broken clutch. Those are fairly cheap and can be replaced during this procedure.
@ashlierawlinson71714 ай бұрын
I replaced my clutch and transmission pulley and the spring and the mode shifter and it still makes noise.
@jsolo7576Ай бұрын
@@ashlierawlinson7171 hi. Did you find the issue?
@rightconditions20102 жыл бұрын
You replace the whole transmission right? Theres no way to replace bearings only. Thank youf for the video.
@MrPurepecha872 жыл бұрын
I was waiting for the same thing until I seen the big part lol wtf
@jordanchristie96272 жыл бұрын
There's no way to replace the bearings separate from the gearcase on this model. Gotta buy the whole assembly.
@SoullessProductions Жыл бұрын
A drill with a clutch works for every bolt but the nut for the basket. You could have had this done in 15 minuets.
@xandervk23712 жыл бұрын
You could have used a transmission with all metal gears, it costs just a little more.
@JaimeP83 Жыл бұрын
Mmmm but you don't show how remove the basket!!!
@bigdaddy4975 Жыл бұрын
Buy a drill preferably an impact 😂
@luisrosado4181 Жыл бұрын
He get pay by hour.
@fmcalv48892 жыл бұрын
Dude are you going to talk
@shilohmcrae9862 Жыл бұрын
He’s at work lol
@ilosappliancevideos47 Жыл бұрын
No customer is able to pay for all that time, labor and parts. This has to be covered under warranty.
@1for4ll Жыл бұрын
Yes but my country far away from US
@ilosappliancevideos47 Жыл бұрын
@@1for4ll Ok. Good luck Sir.
@dragor6527 Жыл бұрын
Some people do occasionally pay for this. Ive had a handful, but i can liteeally count them on one hand ha
@user-ef5fb2oh7n9 ай бұрын
Tengo una igual , el Clutch está gastado y también el drive pulley , sueña fuerte mientras da vuelta , puedo cambiar el clutch oh necesito toda la transmisión