What's That Noise? How to Diagnose Top-Load Washing Machine Noises | PartSelect.com

[@partselect]

SAVE 10% ON PARTS NOW! - USE CODE KZbin2023 AT CHECKOUT

[@LeslieMartinezA]

0:29 - High-pitched vibrating sound - drain pump 1:21 - loud buzzing sound when start - dry motor or motor start capacitor 2:34 - Loud thumping sound, slow agitation, slow spin speed - Motor coupler 3:49 - belt drive model: loud thumping or screeching sound during wash or spin cycle - belt failure 4:24 - Loud roaring sound in spin cycle or scraping sound - tub bearing 6:07 - loud banging in spin cycle, shakes uncontrollably - suspension system (coils) or dampening straps

[@ACoustaDC]

Not all heroes wear capes.

[@lulubelle24]

I have a twin tub and the washer side, sounds like a pneumatic drill when it agitates. LoL 😂

[@cMrob73]

6:10 - Suspension system. That's my problem.

[@stijerina2290]

Thank you Leslie 🙏

[@oxstrangelyrandomxo]

You a real one Leslie! Thank you!

[@ashleypollard3170]

Thank you so much for actually making that washer make the noise associated with the issue to help me better diagnose the problem. That was HUGE help.

[@NaptuRo90]

Agreed 💯

[@wjlavasque]

Well my sound wasn't here. But honestly good job with all the sounds. You might be the only people I've seen actually show the noises.

[@bridgetterosek8630]

The actual noises helped with the diagnosis of the issue, thank you for this!

[@carpepacalis959]

I agree. Most useful site I saw and helped me diagnose the issue!

[@artsbydebi]

@@carpepacalis959 what ended up being your problem???

[@latrice2491]

😂 right

[@camlouie1698]

My washer makes a grinding noice and then nocks out the power I just changed the agitator dogs too but it's not that sounds horrible

[@gijo1609]

Excellent video with a calming guy with Zero BS like so many others on KZbin

[@nicktaylor1649]

The sound I’m getting isn’t in this video, but that still helps me out. So glad this is here.

[@luisb9523]

It was the drive pump in my case, a small zipper from a clothing item got caught in there. You are life saver, sir.

[@Tiggerr90]

I am so thankful I found this video! I was watching another on this channel that led me through taking my washer apart but almost changed the wrong part out. I replaced the motor coupler and we're back in order!

[@katherineluzynski2744]

I know this is 4 years old, but thank you so much for showing actual examples of the machine running with the defective parts you are discussing!! It greatly helped me know exactly what the issues are with my machine. Other folks just describe the sound - nowhere near as effective.

[@rtong12]

Love how you've demystified what cause noises and problems with washing machines. Thank you.

[@grand_vacation]

I just wanna hug this guy lol this was the best video ever.

[@lesley368]

Thank you! This was the most helpful video because you included noises and videos of internal components that helped us rule out and diagnose the issue. Really appreciate your video and help!!!

[@michellecarroll2842]

Excellent video! The inclusion of sounds and defective parts movements or actions was particularly helpful (i.e.wobbly tub bearings). It would have been nice to show us examples of electrical-caused problems like arcing, burning and overheating for novices who might not recognize them. Thanks so much for this hihly useful educational video

[@ferrous719]

That was incredibly thorough thank you. Also, I'm pretty sure about half of those sounds come from my washer. Its probably time to retire it (it lived a good long life and I am not upset by this at all)

[@cassiestephenson6725]

Thank God I found this guy, we were gonna buy a new washer completely but now all i gotta do is change one thing😊 yayyy! Thanks for saving me money😆

[@rosswadeson347]

Thanks for demonstrating the machine noises. My noise was not there but it was so good have them identified.

[@frieseteam1797]

Thank you for giving the sound examples. Very informative!

[@johntbaker]

That was a huge help for me. Very comprehensive, detailed, and the audio 'noises' helped me narrow down the issue with my GE washer!

[@partselect]

Glad it was helpful!

[@griffisjm]

What was it? I'm struggling with mine

[@johntbaker]

@@griffisjm I apologize, but whatever it was returned, and we replaced the washer with a new one.

[@scootermom1791]

The noise my washing machine is making isn't on this list. My washer is suddenly making a high pitched noise while agitating. At least I know what isn't wrong with it. I just wish I knew what was wrong with it, so I can get an idea of how much it will cost to fix it. 😢

[@chicafresca81]

Same! Did you ever figure out what it was?

[@joao35409]

Sr you are a true professional

[@fawstino4827]

i suspect a worn bearing, after replacing suspension rods, it isn't off balance now but vibrates. your video helped a lot to narrow down the issues & give me some extra maintenance tips. now i know where to look and what i'm looking for👍

[@NevarRyoko]

THANK YOU! Finally a video that gave a sample of the sound. Now i know my washer has a bad tub bearing. The sound is almost identical.

[@Hoakaloa]

Very helpful. Unfortunately for me the appliance repair folks around here just don't want to deal with these issues. Charge me $100 for a diagnostic and then they say, "Just get a new machine." Sigh.

[@italianballbreaker]

I have a GE top load washer a few years old and it just started making a squeaking noise only during the agitation cycle. Any suggestions on what to look for ?

[@tertiuscilliers6412]

Thank you very much, your video assisted me in fixing my top loader.

[@allenyen5793]

Hi, We have Electrolux washer top load. We can hear louder noise only at the end of the cycle then draining or drying. What do you think can cause? Thank you!

[@karascene13]

Thanks for the video! I appreciate you demonstrating the sounds. Best video I've found. 👍

[@mrsmith5114]

Awesome videos. No clue if I have figured out my issue, but great video.

[@cwood3747]

Great video. Thanks for taking the time to help us all through the diagnosis process.

[@FlyBoyDrummer]

This was quite helpful! When my top load washer first starts to fill, there is a bubbling sound in the bottom of the tub. Is this serious, any idea what causes this?

[@gregwatts2570]

thanks for the info and sharing the "noises"

[@katbosh7748]

Thanks for the various problem's!

[@helpinghand6037]

If your top load washer has a bad baring will it be loud all the time or just on the spin

[@Guest-zm9sj]

my top load washer has those 3 problems 1. drive belt 2.tub bearing 3.suspension system. this was so helpful thank you very much!

[@KentDurvin]

Wow! It must have taken a lot of work to create the problems shown to get the sounds. Thanks! My noise was not in there. It makes a loud repeating clicking sound as it tries to get started agitating. Click-click-click pause click-click-click-click pause click run. It is old, but I keep fixing it.

[@RSkywatch444Hz]

Did you ever figure it out?

[@KentDurvin]

@@RSkywatch444Hz It soon stopped working. The transmission failed, and it was time after 30 years to replace it. I doubt I will be able to fix the new one at all.

[@RSkywatch444Hz]

@@KentDurvin thank you for replying. I’m hoping mine is only a motor coupler.

[@shilorich4646]

I agree, the noises helped immeasurably!

[@Flormorena1020]

Good video. I’m pretty sure the squeaking is the drive belt, thanks for the informative video.

[@l.cameron1724]

Great video! Thanks for the sound demo.

[@giulianafacho330]

My next project after you helped me fixed my dryer! 🤗

[@kam5876]

my Kenmore 90 series washing machine is ticking during spinning. Clothes are too wet at end of cycle. I just replaced the drain pump and coupler a couple of weeks ago. Are these symptoms likely to indicate a failing clutch or do I need to replace the parts inside the transmission? My husband said that he rebuilt the transmission a few years ago.

[@juanbeltran3098]

Hey did you fix the ticking problem and what it was?tia

[@WillaWBlake]

Not my sound but thank you for very good video!

[@margaretsmigiel7091]

My GE washer makes a light knocking sound while in the spin cycle only. Would you know what this could be?

[@cynthiagamez4180]

Thank you for this video. My machine is making a whirring sound, which is not normal. Any thoughts on what this could be?

[@partselect]

Hmmm. It could be a number of things, but the whirring sound you're referring to may have something to do with an unbalanced washer. Here is a list of possible causes of a noisy washer that you might want to take a look at: www.partselect.com/Repair/Washer/Noisy/

[@elpasodanceworks2037]

@@partselect Thank you, it oddly stopped....But, I will look at this link. :)

[@smarroqu]

Steve, you are my Hero. Question, You did not say any reason why the bearings goes bad. I can imagine it has to do with water leaking in to it but I don't really know the reason so I can keep an eye on it. Do you know why? thank you Sir.

[@TheTuffOnes]

It's from overloading the washer, imbalanced loads, high humidity conditions, or just defective bearing. Usually overloading washer.

[@onceuponatimeireadabook]

mine's a grinding screech whenever it draws water. I'm going to check all of these to see if maybe one works. ❤

[@xsietube]

Check the inlet hoses. Could be debris on the filter screen

[@andrewkinzie9564]

This is what mine sounds like. Did you find a fix?

[@lisaclark7291]

That was a great tutorial. The background music made it difficult to hear the sound on some of areas you were explaining. Please don’t take this comment as rudeness. I meant it as corrective criticism. Others may have the same issue. I would hate to see you lose viewers due to background noise. I wish had known these things earlier in life. It truly is helpful.

[@amseek94]

Excellent video! Actually hearing each sound is so much better than trying to describe a sound. Thank you!

[@Majoreete13]

My motor and belt may Be out time for a new one . Thanks for this video

[@davidpeterson4416]

Thank you for a great video. You covered all of the problems I needed advice on.

[@2manycatsforadime]

I have tried to remove this shaft 4:53 and it won't come out, direct drive. Is there a trick or is this part of my noise problem like a bad bearing. My motor couple was replaced and the noise is still there. The reversing parts in the transmission were replaced correctly and still the noise, banging back and forth.

[@sislau]

Please, if you can help me? I didn't notice my top load washer's problem addressed in your video ... As it's running it makes (indulge me) a 'wehwehwehwehweh' kind of sound. And then when it drains it's an even singier sound. What can that be? Some belt? A pump? Both? I have a Whirlpool Ultimate Care top loader. Thank you for any direction you can give me!

[@danielyang5033]

I had replaced the suspension rod for my whirlpool top load washer,and it worked fine until recently the problem came back, is it because I didn’t replace the 4 old plastic cup suspension rod supporters and kept using them?

[@nikleigh456]

very good video . nice and thorough . why do you suggest avoid very small loads?

[@merseybeat1963]

No help as problem we have is not covered. Our Top Load Washer is making a loud Squealing or Squeaking noise in the actual wash cycle. Any ideas

[@andrewkinzie9564]

This is what mine is doing. Did you find a solution? Thanks

[@merseybeat1963]

@@andrewkinzie9564 it has been coming and going..we have a neighbor who will look at it if it gets worse..I was gearing up to buy a Speed Queen : (

[@andrewkinzie9564]

@@merseybeat1963 Okay, yeah I think I'm going to have to replace mine as it makes that sound, doesn't do the wash or spin cycle. It only fills, drains, and makes that loud annoying screeching sound while trying to spin. Thanks for responding back. Have a good one.

[@merseybeat1963]

@@andrewkinzie9564 sorry can't be of help as ours hasn't actually stopped working so haven't had to call the repair guy neighbor.

[@soundhill1]

Also a cracked hose may be dripping slippery water on to a belt. Mend hose and clean belt with meths,

[@purduephotog]

Thank you for the audio!

[@LOCOSCLAN718]

You the goat 🐐 Steve. Thank you

[@patriciasmith3906]

Excellent video because you show the noise and that was very helpful thanks for sharing 👍 😀 🙏

[@tonyl4571]

Poor guy ... his washer has ALL of the most common issues at the same time.

[@KJ-xx6xr]

adding in the noises was helpful. Unfortunately my washer's noise was not there...dino death scream is what i'm calling it, started in the end of the rinse cycle and now just screams. 21 yr old whirlpool. Think I got my use outta it.

[@jamesbasedgod1389]

Under rated video

[@reenXsham]

My sound wasnt there.. i just got kenwood twintub 2022 model..its been obly 2 months and i use it v nicely. But in the spin tub..now a screaching sound os coming when it runs. Usually its not there when clothes r only drying..but when i spin with water..then it comes. Should i not put water in there? But then why is the water inlet present in that dryer tub? To spin right? Pls someone answer tonthis problem if u know.thanks alot

[@RS-xt6bo]

Best part of the video is sounds of machine is also audible

[@jordanedwards7800]

My top load switch that is activate when the cover closes is defective,can it be by past I try it nothing the machine only may the sound before it start washin

[@parveshv.merchant9806]

Sir... You are a blessing..

[@triciaspreen4650]

My machine is a stack washer/dryer combo. The washing machine is making a sound like a depressed ghost, it sounds like sighing and moaning. What could cause that?Its creepy! I hope you have an answer. This is driving me nuts.

[@gingerbabyyonkers5272]

Welp seems like a suspension issue, time to pull money out of nowhere 😭😫😂 Thank you so much for helping me figure this out

[@partselect]

Happy to help!

[@sparkone007]

Great video

[@rod1148]

What could the problem be if it seems to be getting noisier on the agitate cycle but normal on spin? Thank you.

[@lulubelle24]

I'm having this problem with my twin tub.

[@translateslowly]

Mine is making a clicking sound and won't agitate and it's not the agitator. In fact it trips the breaker when trying. Spin and drain work fine. It is a 2 or 3 year old hot point. Any ideas?

[@dogwink]

What a fantastic video

[@alansanchez4048]

What a great informative video! 👍🏼

[@amypatriquen354]

Thanks Grandpa 👍

[@jbtwo1733]

Perfect video thanks a million

[@iowabackyardfarmer2952]

nice video, but I get a clicking (kind of a "tat tat tat tat") during agitation. Is that the clutch?

[@timothymarshall6709]

I have a Maytag bravo x and when its sensing it sounds like there is something round rolling around the outer tub

[@Adnaw-n5l]

Excellent video!!!!!!!!!!!

[@MatthewMcFarlands]

Great video + layout

[@ALCRAN2010]

What about loud cluncking noise only when the tub is spinning down after wash? Sounds like gears jumping its teeth, idk...

[@swasjed9002]

i had spin problem replaced drain motor and it worked

[@rahulmenon12]

Really helpful! Thanks a lot!

[@neeshapatterson2730]

Omg your so good at explaining thank you

[@reneeklimala6868]

Thanks Steve! The video was helpful.

[@ScantPear]

1:29 that is the water solenoid... not the motor especially that the washer is not connected to the water

[@GloriaMiller-ue9yr]

Very informative video.

[@ennaeerdnatedraf9776]

Thank you! Very helpful

[@comeLetusAdoreHim]

how about the clicking sound during rinsing and spinning cycle?

[@dragonkat13]

still trying to figure out why our top load LG washing machine is making a grinding sound on agitation....any ideas?

[@stephy6199]

Or water valves are clogged from dirty junk in water when humming but spin cycle works

[@sbearly]

I have kind of a grinding noise when in agitation mode, like metal teeth are scraping against each other. But it still agitates. Would like to fix before what ever it is breaks.

[@partselect]

Depending on your make and model of washer that sort of noise is common to worn agitator dogs assuming your washer may have a dual stage agitator. If this not the case we would require a bit more information on your machine to assist you better. Good luck and thanks for reaching out!

[@andrewkinzie9564]

This is what mine sounds like. Did you find a fix?

[@sbearly]

@@andrewkinzie9564 It was the transmission. I had a pro replace it for $385. Expensive, but I'd rather keep these older machines working than buy the newer style water saving types.

[@andrewkinzie9564]

@@sbearly I see. Thank you so much for the info. Have a good one.

[@sbearly]

@@andrewkinzie9564 If you have done any repairs yourself you should be able to do this if it is the issue with your washer. I have done many repairs, including replace the motor. The reason I called an appliance repair shop to do it is because we were expecting visitors to spend the week with us arriving the next day and I knew it could take me several hours to get it fixed once I figured out what the problem was. It took the appliance guy about an hour to do the repair - he had the part in his truck. Not sure how much of my bill was part vs labor, probably about half and half.

[@WV591]

I replaced all springs and washer still making loud banging sound in spin cycle . even when i spin it by hand slow I hear a knocking sound at apx10 and 4 o'clock positions.

[@georgecourter4845]

What does a large squishy sound only dieing tge wash cycle mean? In spin cycle there is no problem.

[@dsquare3703]

Thank you so much It's just as I thought. The Guys put too much in the washer. Then it thumps and practically walks across my pantry floor. Spin. Ok suspension I wonder how much it will cost

[@emmygee6219]

Do we replace the drive belt if it's really noisy and squeeky? So loud and annoying it gives me anxiety 😂

[@singinalex52]

Excellent video!

[@richard-fy2mu]

Never had a washing machine growl and literally jump off platform. At 8 years old, is it even worth the technician costs? On small loads it can go out of balance so bad it has to be stopped. On full loads it makes a low growling grinding noise but no jumping around.

[@Nerd_Gamer_Buddy]

mine makes this whining noise when the spin cycle is about to start. what would that be?

[@ztuber7763]

Figures you didn't go over creaking during agitation which is what i have now.

[@karenlowrimoreaaron8788]

How to remove agitator in hot point washer

[@Lil_HandGrenade]

Well my problem is the last one, but the only thing additional to that is that the spin basket or drum is tilting to the right rear. It agitates normal, no excessive noise. I wonder if something is broken

[@stuartbear922]

Check your suspension springs.