Gear Talk : What Bass Amp Should I Get?

► Check out my courses at: TheBassWizard.com
▼Donations are appreciated!
►Bitcoin address:
38LxHw2yMgUEGJCB7XykLvVub4qytsidJj
►Bitcoin Cash address:
qr4smvnk2lxu67cxs0q9ww4ue03jfytt9ynjjrmcgc
►Ethereum address:
0x5362802eaab4103754C488E1A05dD829Ad9e5bb7
►Litecoin address:
MSEaJfBcwHJgBHebM9QxXBokQD4CDjKM3a
►PayPal email:
[e-mail]
▼ FOLLOW ME:
Instagram: / basswizard
Facebook: / thebasswizard
Twitter: / marcbasswizard
Marc the Bass Wizard discusses all the different options and considerations you have to make when looking for a bass amp. Things like speaker size, cabinet size, heads, room size, venue type, impedance, etc.
Check out my Slap Bass Mastery Course: www.thebasswizard.com/slap-bas...
Check out my Solo Bass Mastery Course here: thebasswizard.com/how-to-play-...
Don't forget to subscribe and signup for my mailing list at www.TheBassWizard.com !
Facebook:
/ thebasswizard
Instagram:
/ basswizard
Twitter:
/ marcbasswizard

[@caseyharrell702]

Looking back I made some rude comments a year ago, I have learned humility and rewatched and was impressed. You have a new subscriber.

[@williamshird4253]

good stuff you just said,,keep learning and listening

[@nicolasurteagabriceno3388]

Nice one, dude. You have a new like.

humblebrag smh

[@terryrowland1558]

Marc is super knowledgeable, and very talented.

[@bumpdunlop]

This guy deserves a few rude comments. He says he sometimes uses 2x10 cabinet because there isn't enough room for a 4X10. An 8x10 takes up the same floor space as a 2X10. How simple minded does he think his listeners are? I haven't accepted a gig that gear had to be carried upstairs or downstairs since I was in high school. Who is hard up enough for a gig to do that?

[@greedygringoprospecting6941]

make sure the cabinet has WHEELS trust me

[@ianperge7331]

I'm not a fan of wheels or castors on Gear, which besides making a hole in something that is designed to not have additional area removed, usually aren't Lockable and will start to roll backwards on the smallest of inclines. I also don't like automatically decoupling from the Stage Floor depending if it's hollow or not, which can cause the type of low-end "boominess" that Sound Techs can only control by lowering the Bass practically out of the FOH (if I need to control that, I'll do it myself with my Auralex GRAMMA). IMO I think one of the many transformable 8-in-1 "Transport Carts" which can be repositioned into a Transport Cart to a "Furniture Dolly" to a 2-Wheeled Handtruck (and usually multiple-sized versions of each, for single-person set-ups or "Large Band w/ Horns carrying their own PA) is a much better choice: I personally use and recommend the Rock N Roller-brand "Multi-Cart" line of transporters. Firstly, depending on the size one can usually bring their ENTIRE load-in & out in a single trip, which eliminates leaving a pile of expensive gear in the venue or by your car as you go to get the second half and the rest of your bandmates doing the same when no one notices some guy that was maybe helping was in actuality making off with your Gear (true story: a Guitarist friend I'd worked with on several projects had a 1972 Gibson Les Paul Recording, early '90s Gibson Les Paul Standard & Fender American HSS Stratocaster stolen after a Gig in NYC right out of this scenario). You can also make the horror of a basement or 2nd Floor gig far easier as just about all of these can be used as a Handtruck instead of needed 2/3 people and eliminate the danger of a dropped-and-tumbling cabinet. So do yourself a favor and invest in the $60-$150 range (beyond that is just larger models that can honestly take up too much space even when folded up for transportation in your car) and just make sure you get one with inflatable Rear Wheels and not Molded Solid Plastic or Rubber-type material: going up-or-downstairs or anything but totally dry outside ground will thank you for it!

[@BarrySPeas]

+Ian Perge Castors don't necessarily have to be on the bottom of a cab, seen alot of bass cabs with them on the side so you still get the coupling effect while having the portability.

[@housebrigade]

kenny cadarett what if the cabinet is 10cm by 10cm

[@greedygringoprospecting6941]

that's 10 centimeters correct that would be quite small my cabinet is a neo 4-10 no vents and the wheels just pull out so you can put it on the ground I use a 500 watt true rms head it's loud enough I have always been a fan of raising up the cabinet better sound even when I was using 2 15 inch EV prolines in single 15 cabinets it just tends to blend better than being a sub woofer when it has contact with the floor

[@mr.esfusioncollect8494]

my peavey tko115 breaks my back.

[@TheRealNewBlackMusic]

oh how we long for the good ole days back in the 70's when we would get on stage with big giant ampegs and marshall stacks that we taller than we were. still have nightmares about unloading those things at 5 in the morning after the shows. LOL!!! great video keep it up!!

[@TheBassWizard]

+nublackmusic All setup nightmares aside, it did look cool though... Lol!

[@SgtTronBon]

Looks are fine, as long as some roadie is doing the heavy lifting! lol

[@adamziolkowski2549]

Some still do, if you have the means

[@rome8180]

I still play with an Ampeg, because it sounds so good. I leave my 810 cab at home though. The 212 is plenty loud, especially with FOH support. And it sounds just as awesome.

[@jimcampbell8061]

Far too much emphasis on the weight of gear these days. People used to drag hammond b3/leslie and big tube amps wthout roadies. Oh how did they survive?

[@dogcowrph]

Thank You! I'm 55 and always wanted to play the bass guitar. I'm considering my options as a beginner. The discussion of impedance was very helpful. It took me back to my college days. I'll be checking out all you videos. Again, thank you so much.

[@ryanmcfarlane453]

Drew Freeman never late to start, welcome to the musician family :)

[@ahbicr]

hey man if your just starting you should look at a combo amp!!! they are literally hundreds of dollars cheaper. as in the cheapest you can get at guitar center right now is $500 for a head and cab and they are literally bottom of the barrel brands but on the other hand you can get the fender rumble 25 for $100 and it will sound very good and give you plenty of sound if your just learning alone (i would often have my whole family yelling at me when its only at half volume), but if you are playing with friends maybe go for the rumble 40 same great sound with substantially more power but its $200. Another hint is that if you are playing with other players you should have around 3-4x their wattage, this isnt the rule but its a good general guideline. Good luck!!

[@conanhayle]

go for it ,I,m 70 and have been playing bass since I was 19

[@conanhayle]

get yourself a Yamaha rbx270 bass ,,used about £50 and a set of rotosound strings ..and a 20 watt bass practice amp .. you will be more than happy

[@InVivoRL]

Drew Freeman if you’re a beginner you should get a small amp that won’t take any effort carrying unless your a beginner playing gigs for some reason

[@64jazz]

Hey Thanks for "clearing up" that whole 4 ohm/ 8 ohm thing. No one's ever broken it down so that I can understand it like you just did, Thanks a lot Bro.

[@weezerman2002]

Ampeg classic 4x10 is an amazing cabinet that you would never have the urge to upgrade.

[@TheRealCowlick]

With what head would your pair that?

[@chloedegurechaff1941]

@@TheRealCowlick My dad uses a David Eden Trailer pro 400w head with his ampeg 4x10. Its a great combo.

[@TheRealCowlick]

@@chloedegurechaff1941 nice. I just picked up a hughes and kettner quantum 600 head with a 4x10 cab. Only for 750 dollars.

[@adamziolkowski2549]

Unless you can get an Ampeg 2x15 😉

[@rhoodj]

I agree, but if you can have a deal on a 8x10 go for it.

[@JustinBruton]

been playing guitar for years thought I would try my hand at Bass, wanted to learn a little about bass amps. Your video was clear and extremely informative to me, thank you.

[@mikeyspikey001]

This video is golden!! I can't tell you how much you have really helped me both musically and gear wise. Everything was so clearly explained and now I have better knowledge on ohms, heads and cabs. Thank you for sharing your knowledge to help us noobies. You are a great bass inspiration to me.

[@Christianonbass]

Basic, yet extremely important info. You did a great job of explaining Ohms in regards to matching speakers with amp heads. Good job!

[@TheBassWizard]

Sigh Co. Bassist Thank you!

[@Nintendoazerty]

The Bass Wizard Yes really good explaination and nice video!

[@tino8442]

Sigh Co. Bassist Bass-ic

[@cfoscoop]

Thanks for clarifying this. I finally understand the whole wattage/ohms thing.

[@Dominik-bass]

I really would NOT say that 12" and 15" speakers get muddy. Some of them can, probably... I mainly use 12" for bass. never had problems with them. Most of them have a nice mid voiced tone and they can move a whole lot of air! Think about a 4x12" =)

[@eknight101]

I agree 💯. I have a 12" hartke amp and I just eq the muddiness out if it is necessary.

[@Metalbass10000]

I run an Ampeg SVT 4 Pro, using the internal crossover to run everything above about 800 Hz to 1kHz into a 4 x 10" w/ a horn, and everything below this into a cabinet with an 18" Electro-Voice. I have never heard the words, "mud," or, "muddy," even spoken in the building. Most of the time I'm just playing an all original 1983 Fender P bass American. I get compliments on my tone from fans of all genres. I primarily play metal, but jazz, blues, funk, a wide variety of rock, even played a couple R&B studio gigs (old school 1970's stuff, what I think of when I hear the term, "R&B," but that's just me), and a few country live gigs, when money wasn't flowing for me many years ago, have been played through that rig. My most recent metal band, about a year and a half ago, told me after my first jam with them, my defacto tryout, that it was the best bass tone they'd ever heard. When I brought my 1992 Ibanez, loaded with EMG PJ- X pickups and the BQC system preamp and pots, two weeks later, they corrected themselves on the new, "best bass tone they'd ever heard." Personally, I thought they were blowing smoke up my ass, and paying me false compliments, but they insisted on how they were serious. The point is, any bass rig can sound muddy, if there's enough factors creating muddy tone: the hands creating the player's technique (or picking if using a pick?), or the player's ear doesn't know any better, yet, the bass itself, even rolling off too much on the knobs/pots, especially if it's got active electronics or EQ and someone starts turning knobs they don't understand, then bad cables, really cheap cables, or needlessly long cables can contribute to mud, then finally, the amp and cab(s) can contribute to muddy tone as well, but unless it's a REALLY low quality amp or cab, anyone who's reasonably knowledgeable at how to dial in an amp can get a bass tone that's not muddy. I never even knew that was a concern until I started watching KZbin videos about 5 years ago. Best advice: play, listen, experiment, play, listen, experiment, etc. And learn from others (who know what they're talking about, some don't).

[@rke422]

True, you just have to dial in your tone differently - I bought a used Peavey PVH 212, and LOVE it (but in TGC store, it did indeed sound muddy, even through a MarkBass head - when I upped the treble & took down the bass, it was warm and clean, but has a tendency to be a bit dark - which I love, because, metal blues:-)

[@cezaralopes]

I'm starting studying bass and seeing it in 2019. Thank you for the direct, simple and accurate answer.

[@rome8180]

I would say don't worry about the weight unless you're just playing shows constantly. Nothing beats an Ampeg tube amp. As for cabinets, I prefer smaller speakers. They give a tighter sound. Right now I have an 810, which never leaves my house, and a 212, which I use for gigs. But honestly, I could go even smaller on gigs. A 112 or a 210 would be fine. Every place I've played since the '90s has full front-of-house support. You don't need a loud amp.

[@jackkrag]

Dear BW, I bought my first ampeg in 72. I have seen countless tutorials. You are right at the top of clarity and very concise. Well done young man well done. k

[@stratoshell]

Man, i´ve learn so much with this this video, thanx!!

[@Kenosistoblood]

I too love cabs with neodymium speakers and class D heads. When I signed my endorsement deal with Gallien Krueger, I ordered the Gallien Krueger MB 800 Fusion head and NEO 410 cab. By far, the best amp and cab combo that I have ever owned! Endless power, clear tones, even at very loud volumes playing on a down tuned 5 string bass and extremely reliable. Gallien Krueger did a fantastic job on designing and building both, my amp and cab.

[@MrPrincebass99]

Been playing for over 30 years, and toured for years. Good info. Right on. I use a mountain of SWR gear, including a Headlite in one configuration. Not one failure or problem, ever. Good post.

[@FenderBassMan]

"Lightweight" cabs and class D heads. Having played--oh so many years back--an Acoustic B360/361 (with an 18" woofer and folded horn), I share Marcelo's pain and enthusiasm. Just recently purchased a Quilter Bass Block 800 class D, and matched it with a pair of 2x10s. The power out/decibel level is astonishingly loud yet clear and rich/deep.

[@ruthlessadmin]

Very comprehensive answer - thanks! Most answers to questions like this are "oh, well it really depends on your budget and needs...vagueness....vagueness....budget...needs....mostly budget but also needs...more vagueness". It is very frustrating.

[@woot1404]

Great explanation. I'm still learning about ohms and wattage, cab size vs heads, how much power/sound I'd need based on the venue, etc. This helped break it down pretty well for me. Thanks, much.

[@Losbass]

Good video and advice! One thing to keep in mind , for optimum even speaker power distribution for a 6X10 setup, a head that is capable of 2ohm load is most efficient. The setup i have is like yours only difference is my 2x10 cab is 8ohm and my 4x10 cab is 4ohm , total impedance 2.67 ohm, even power distribution to each cone. They say that matching cabs are the way to go , so say 2 410 cabs @ 8ohms , would be optimum , so it will run at 4 ohm , which most amps can handle , without a sweat. When i gig , small coffee house gigs get my single 210(8ohm) 400 watts , bigger shows get my single 410( 4 ohm) 800 watts, using my Gk MB fusion amp( 4 ohm minimum load) . And when i want balls to the walls output , i'll run both cabs(2.67 ohm total) but with my mesa walkabout amp, which can do minimum 2 ohm. Also , if i may request a video that showcases amp settings as a guideline. I have found that there not enough videos floating around KZbin explaining how to use amp eq's and or compressor, limiter's. Wish i had KZbin when i first started playing bass , what a great resource of information and entertainment. Anyhow great channel and keep up the great work ! Cheers!

[@BigA_13]

I have a Peavey Vb 2 Tube bass head at 225 watts and a Hartke 410 cabinet at 400 watts. I love my setup! It has great tone and warmth and is great for any style of music. The tube amp is very loud and sounds amazing! The big drawback I have is that my rig is very heavy but I pretty much keep this rig in one place and mainly use it for rehearsals, practice, and recordings.

[@dorianclini]

Thanks for the ohm explanation! I almost made a big mistake :D

[@Beemerguy929]

Thank you so much for making this video! I never understood the Ohms portion of heads, and cabinets. I really appreciate this, thank you again.

[@shrnkng3753]

Marc thanks for the advice I wish I had seen your post before I bought my Ashdown Combo, its now on Ebay. Thanks again Mark

[@jimincornwall1925]

Thanks Mark for a very informative primer on bass amps, especially powering 2 cabs - I learned a lot. I am just starting to play bass, and your video helped me a lot.

[@Marlina66]

Just starting bass. Great info, especially about impedance. Had no idea. Thanks for sharing.

[@paulaubertin1274]

Love your no-nonsense explanations. Very helpful.thanks man!

[@ghostofresonance4025]

Extremely helpful! Just when I was debating about live sets after releasing a few songs. Thanks

[@johanneswarn5488]

One thing that popped into my mind when i watched this is regarding the pre/post EQ options. What i always do when i get a new amp is set the EQ preferrably with good headphones so that i KNOW that the sound coming out of the head and out to the PA is just the way i want it. If the head doesnt have a headphone jack, then i try to set the EQ in a room with good acoustic properties and through a decent and transparent sounding cab. My opinion is (talking PRE EQ) that the sound guy often can quite easily dial in a sound that HE think is good, although not necessarily resembling the sound you really want people to hear. Thats the difficult bit of setting your bass sound up i think,

[@DropB]

If you play stoner, doom, sludge or similar music, always go with 15" speakers. Preferably large sized 2x15" with lots of power or two quality cabs. 8x10" is OK too, but I personally hate the dispersion with that.

[@gutierrezp49]

Mikko Puhakka what kind of cheap head would you reccomend?

[@SolidFoxHoundSF]

Triple6 Peavey

[@bernieriegger7447]

Your explanation of amplifier and speaker ohms was awesome. I finally got it figured out...Thanks

[@fireemblemistrash75]

I got my own Headlite bass amp, same as yours, sounds amazing.

[@sallen4848]

packed with a bunch of great info without getting bogged down in the weeds with tech geek stuff. Thanks, man!

[@researchmuffin]

Dude this was awesome, thank you so much! A lot of knowledge in a short amount of time that was easy to understand and easy to stick with.

[@tripppayne8777]

For a "what bass amp should I buy" primer for both someone new to bass and making the right investment and the working bassist and the scenarios they will encounter at venues, this video hits on all the right points. I would refer people to this video for a concise explanation. Brands, speaker sizes, etc. are rightly left to buyer's own ears for their application and budget. I always buy gently used to get the most for my dollar. Some of the comments below criticizing this video should be ignored. Sure, they may be factually correct but the points they are arguing are really left to the buyer to determine what's best for them. Nice job "Bass Wizard"!

[@peterbaker3878]

Wow you just helped me out tremendously on how the ohms work on speakers and amps. I'm stoked now haha! Thanks

[@conanhayle]

Marshall 100watt and 4x12 bass cab,, this is the ultimate ...bin playing bass for 50 years and I have never found anything better

[@Synsizer]

Thx man! There are certainly other factors, but this is some of the basics that many just starting out don't know, so definately helpful for sure. Appreciate your time and efforts.

[@samuelobregon5521]

I watch your video and think you were very honest and very informative. I appreciate all the info, thank you and great job!

[@ryanwarsh]

I'm currently looking for my first head/cab setup since I've been using a Fender Rumble 100 on stage and it's a pain in the ass to carry around. Your video is very informative. Thank you.

[@zag1118]

Fender rumble 100 is very light weight

[@ryanwarsh]

@@zag1118 You must be referring to the second generation.

[@Sco1t_]

RE: Your comments about impedance affecting output @5:25. It is true that a Class D amp will halve its output when the impedance is doubled and so for maximum volume the lowest load allowed (usually, but not necessarily 4ohms) should be used. Again, for people that don’t know, using two 8ohm cabs in parallel will create a 4ohm load. But, other types of amp won’t respond in the same way. A class A/B amp (like the Orange OB1 series) won’t drop output at quite the same rate as class D, so whereas a 500W class D amp might operate at a maximum of 250W at 8ohms a 500W class A/B amp might run into the same load at 300-350W. These numbers are for purposes of illustration, you need to talk to the manufacturer about a specific amp if you want to know how it will behave.

[@junbu8958]

Thank you for your comments on the bass amp issue, I have a Hartke 4X8” 500 watt combo coming home with me soon ,I hope this will do it as far as being heard also with my sound in tact

[@terrimac7993]

Thanks Marc. The best/simplest explanation ...especially about ohms and wattage.

[@jburdsinfuse]

Really helpful. I'm a guitar guy and this is new stuff to me. Thanks!!!

[@raybassman7536]

Hi Marcelo..I am 61 and have always run original SVT's from 1974 and built my own cabs with JBL K-140's and E-140's ( all 15's ) and I'd port the cabs to JBL specs, but still use my own cab designs. I can't get raw JBL speakers anymore, maybe they closed down the Northridge plant, I don't know. I had an Ampeg refrigerator cab 8-10 too. Well...I am over all that big equipment now, because I do like the micro amps, not just cause of lighter weight, but the amount of power available for sizeable gigs, and mainly because they DO sound good. Bottom line is, ...the way the companies are making bass amps now...you can get your prefered bass tone out of any one of these amps now days, so just grab one you like and go.

[@laurentnaminzo4686]

A great thanks for these clear vision of using amp heads and cabinets, Marcelo!

[@Dronesword123]

I use a vintage fender bassman with the dual showman 215 cabinet for my house or very large gigs. For regular shows, I’ll use either my old BXR 300 with an ampex tube preamp and a 115 cabinet or I’ll use my BXR 60 combo with the tube preamp. The 60 is a 1x12 combo.

[@RossDuClair]

Bass Wiz: Excellent mastery of the subject. Your presentation is informative and helpful. Well done.

[@Kcducttaper1]

I concur. I've used an Ampeg 410 all through college and often wish I had gone with a 210 just for portability and size. I can't think of a time where I've actually NEEDED my 410 rig over a quality 210 and that includes college auditoriums, camps, conferences, outdoor gigs, etc. For most everything a quality 210 should work fine and a 410 will be way plenty.

[@stevenordstedt2535]

The Crown XLS Series automatically Senses what ohm cabinet you plug into and adjusts itself. SO you Dont make a mistake. Good for Crown!

[@evanlecarde281]

Hey man, good video. The part about impedance was really helpful.

[@RedArrow73]

To paraphrase Hendrix,: "Gimme whatcher givin' John Entwistle"

[@joshuacrandellmusic]

That tip about the ohms was really helpful!

[@DjunkMusic]

Wow, that was super informative and in plain english. thank you so much!

[@Eng202]

This video came very handy just now that I'm about to buy a bass amp. Impedance thing was clear after your explanation. Thank you so much for the help :)

[@forester_overland_nz]

listen to this guy. he knows what he's talking about.

[@Fender701]

Thanks for the clear explanation of the combination ohms and watts

[@steevieel]

I had my cabinet custom made for my style of playing .. the cabinet has 2 10" Eminence 300 watts each speakers with a small Tweeter , running it through a 700 Watt Peavy Tour Amp , Korg EQ both rack mounted .. and on the Bottom End I have a Custom 15" Cabinet with a Peavy Black Widow Speaker for ultimate low end .. they are a little bigger than your standard cabinets and a bit heavier in weight .. but the sound I get out of it is well worth it .. Tremendous Low End , a High .. Thanks for the Tip .. 😎😎😎

[@arnoldchickenshorts6697]

Good info. Concise and succinct. Keep the vids coming brother. PEACE

[@oniaiki]

Great explanation. I am just an apprentice and got a Markbass CMD JB Players School Amp. It supports 150 W at 8 Ohm and 300W with another cabinet. Really simplified things for me. Thanks.

[@nd8579]

Aside from a few minor things, that was a pretty good overview. I've ran an Ampeg SVT 410HLF for a couple years in college and it's been plenty loud for anything I've thrown at it and I'm actually thinking of downsizing to a good 210 cab. Something else to possibly consider is the efficiency rating of the cab. My Ampeg is rated at 98dB sensitivity while the Markbass stuff I'm looking at is about 101dB sensitivity. That basically translates to the Markbass cabinet being able to move more air (and being louder) with the same amount of power due to the cabinet being more efficient at translating wattage to sound.

[@dezsodebreceni4829]

I love the vintage sound of Ashdown

[@P0V3RTY09]

I bought my first Peavey Mark III XP Series Bass Amp head ( a literal beast ! Weighs a metric ton! ) but has the versatility in regards with dialing the tone I wanted. Played through a Peavey Black Widow 15" cabinet...very street worthy ! But like you said in the video...playing clubs the bass is most likely through a direct box to the PA . I only play casually nowadays and that same 17 year old Mark III head and cabinet still work flawlessly !

[@MyFloridaLife]

So I got some new gear, looking to start playing again. I got a 500w, two 10” speaker combo amp (Hartke). Can I daisy-chain a cabinet to this combo amp or no?

[@jennlam]

loved the way you described the ohms!

[@richardmerriam7044]

You can plug two 4 ohm cabs into a 4 0hm blackface late '60s Bassman with no problems. Leo designed his amps for a 100% mismatch with no chance of failure. I've plugged a 2-15" 4 ohm and a 2-12" 4 ohm Bassman cab into one with no problems. Of course this is an 'old school' tube amp. You can't believe the volume for 50 watts of vacuum tube. It's insane.

[@richardbartkus4192]

Thanks for an informative video, especially regarding lods and matching heads with the proper ohm speakers. Thanks again.

[@wheresmycheese8511]

One of the best KZbin channels out there! Very underrated

Wow...you did answer my question without asking....thanks a lot and for your tutorials...I'm honored👍🏽🇵🇷

[@searayus1]

Just bought a new Fender Rumble 200, the new redesigned one. Absolutely love it! This thing cranks! Highly recommended.

[@miguelfensterseifer]

Excellent explanation! Just a little correction: if you plug a 8 ohm cabinet into a 4 ohm head, you actually get a QUARTER power.

[@kosmicwizard]

no. i get 700 watts at 4 Ohms and 475 at 8 Ohms, how is that 1/4?

[@offroader22]

So...sometimes the stage is so small that you can't fit a 4x10, so you use a 2x10 instead. Considering that the 2x10 and 4x10 is the same with (as we can all see) and most likely the same depth, there must be really low roofs in those venues :P :P :P

[@aaronb1185]

Espen Løken i think you meant width not with :)

[@ggp21]

So stand it on its end, make it tall and thin!? You can play tiny stages like that.

[@Theweeze100]

Thanks for the info. My back hurts too having grown up moving refrigerator size cabinets around back in the 70's. Good advice on the lighter SWR 4-10's. I too like having extra cabinets just in case it gets loud, or I'm playing out of doors where the sound seems to disappear. Great to mention the impedance issues, I sadly didn't pay enough attention to it and have blown up more than one decent head learning my lesson!

[@AndBassForAll1]

Your explication of impedance was the clearer I ever heard, I finally totally understood thanks ;-)

[@oysteinhaugen7055]

Dude, this was awesome! I really appreciate your response on my comment! This video is going to be informative and helpful to a lot of people! Have you released any albums?

[@TheBassWizard]

Thank you Oystein, glad it helped you! I haven't released any albums yet, but working on it!

[@richardgray7310]

I have an ancient SWR Goliath 4X10 from when David Eden was still the head engineer for SWR. I has his name on the back. It sounds absolutely gigantic! I use a light weight GK MB500 plenty of power. BTW an experienced player will always send the DI Pre and not post. I also have a 2X10's too I add just when I need a taller amp.

[@RitchieRosson]

Love your points about saving your back. Brilliant video sir. Thank you!

[@eliseoborrerobass]

You are right about the 4 10's. I have a trace elliot 4 10's with a bright box which I modified it to be full range with 2 horns. It sounds amazing, but I am selling it (on ebay $750.) because it's a little heavy. It's ok for taking it in and out of the car, but it's the stairs that I cannot handle. These days you can't count with the other musicians to help you carry anything. Everybody wants to get paid for anything, so you have to plan to carry everything alone in any situation. I found a 12" Beyma speaker with the light magnets that is rated at 900 watts (continous power). I mounted it in a small PA cabinet with a horn. I use it with the Gallien MB200 and, as long as you don't turn it up all the way, sounds great and it's super light. I have a crown power amp that goes up to 1200 watts (bridged) for that once a year outdoor situation when you need to sound louder than usual, and of course, I will never turn it all the way up (the speaker would fry). I've seen that the new tendency is to have a lot of power and turn it up half way or less. The amps and speakers work cool and there is no distortion. I still have my doubts that it's going to sound as good as the 4 10's, but now there is sound reinforcement almost everywhere and big amps are not needed. Thank goodness!

[@davidgrason161]

BOOM! Your video is a perfect example of never being too old to learn something new. I'm not a young kid anymore. I've been playing guitar professionally since WAY before you were born but I have to say that I still found your knowledge and experience very very informative. Now, I'm not a bass player, I'm a guitarist. But HEY, that means that I can play bass too - right? I fully understand your pain when having to move heavy amps and cabs in and out of venues. But I honestly did not know about these ultra light heads and speakers. This is great stuff to know as I am shopping for a bass rig currently. I fully agree with your take on the 10" speakers vs the larger ones. I used to have an Ampeg with 8 10" speakers back when we didn't have options other than to carry around massive boxes. That rig always sounded better than the ones with the bigger speakers. When talking about the impedance of various speakers and cabs, I've always likened them to flowing water through a garden hose. A single hose will have so much resistance. If you run this into a "Y" connector and divide the first hose into two, the water can now flow easier because it's half the resistance. By the same token, if you have two 8 ohm cabs and run them in parallel, you have a total load of 4 ohms because you've divided the signal to each by half. In the good old days when I was playing an old Les through a Marshall stack (and giving myself a lifetime case of tinnitus XD) I had just what you're saying here. The Marshall head was designed for a total load of 4 ohms and each cab had four Celestions wired for 8 ohms. I ended up with a total impedance of 4 ohms. However, for rehearsals, I only wanted to have to carry one cab around and so, I was losing efficiency but still, it worked...ok...it was't bad but it never really cooked like it did on stage with both cabs. I have not played many venues in recent years with a house system and a sound man to run it. If I had stopped to think about it, I would have realized that a pre-EQ DI box is very important to a sound guy that knows his business. So, in addition to the rest of the information in your great video, than you very much for opening my eyes to that DI box situation. I just learned a lot from you young man. Thanx

[@TheBassWizard]

+David Grason Thank you for the great comment! I'm glad my video was helpful!

[@mattu8286]

I appreciate the video. Good information that will certainly help me in my search. You were the first, that I found, to mention the issues regarding the ohms. I may not have learned that otherwise and seems to be a pretty big deal. Thanks!!

[@mattbenedetti1897]

Thanks man, I was considering buying a 1x15. I appreciate you letting me know before buying it!

[@MrDangard]

SWR has NOT gone out of business. As much as they've slimmed down the variety of products they offer, the end is surely in sight. Thanks Fender.

[@restoxxx6366]

Ok, I need help. I loved the sound of this SWR Headlite so much that I actually bought a used one. I also bought a used Goliath III Jr. 2x10 cab (the 8ohms versión). 1. Can I use the Headlite with the 2x10 alone or do I need the 4x10 as well? 2. I thought I could connect the Headlight pre out into the Goliath “in” but I got no sound...what speaker out cable would you recommend with one end as Speakon connector (and I’m assuming the other end into the cab has a regular amp cable terminal for input? Please help!

[@hodaridaniels8786]

I also like the lightweight amp combos, I don't like them really heavy and has a great clean tone. Most of the time, I like the eq that's what make the amp sounds good.

[@chrischervin9329]

Excellent explanation, you made it clear and cut to the chase.. Thank you!

[@paulmockalis4743]

That's a good overview... I'm using a Mark Bass 2x10 combo with the option of another 2 x10 bottom and I think over the vast span of 45+ yrs of playing bass in all kinds of different situations....The 10's definetely win out with their punch, power, lows and highs. I've tried many different brands and stacks... using 18's, 15's and12's, but the 10's seem to, in my opinion cut thru perfect. This was a good breakdown of the scheme of things, well done my friend!

[@jahiasad]

Dude! Thank you so much. You broke it down to a pure science. Love this tutorial. Here's a question...I just purchased the Avalon U5, but I have 2 powered Samson monitors (250 watts ea.). Could I run the U5 through those or will I need to buy an amp and cab to get the best tone? I would love to hear your input on the ultimate Avalon U5 stage setup. Gear I use: Fender Jazz Geddy Lee 4 active EMG Pickups Squier V with J-Retro Onboard Preamp Line 6 Combo 2x10 SansAmp Tech 21 2 Samson powered monitors Send me youre idea of the ultimate affordable stage setup (U5 included in chain) Thanks!

[@jimbigboystoys4077]

Thank you very much Mark for your professional insight! 👍

[@MCP1BEME]

What do you think about a Bi Amp setup??

[@downseyes]

This is great, really informative. Thanks man.

[@fcaneda]

I have two Mesa Boogie heads. The Prodigy and the new Class D Subway. In my humble opinion, the Subway is the best bang for the buck. It's made in the USA and it's come closer to my Prodigy than any Class D amp I've tried. It's 800 watts at 4 ohms and 400 at 8 ohms and will go to 2 ohms. I'm using an Eden 4X10 Neo. It's easy on my 65 year old back.

[@randywilliams9889]

Thanks for the information on this topic on speaker and bass amps I might have spent too much with out the understanding on rigs thanks wizzard

[@sethkelly45]

Hey thanks for the upload, man

[@tranerecks]

I had an h&k 200w with a 4x10. It did pretty darn good. Now i've downsized to an ampeg svp- pro and a fender rumble 75.

[@theanthonyrw]

I have used every combination of speaker cabinets. And nothing says Tone like an Ampeg 8x10E. I dont mind the weight And i employ an Ampeg 4 pro. I have heard so many people say I should just use 2 4x10 HLF cabinets. Well the news is in from Dino at Ampeg. The Ampeh 4x10 HLF's and other 4x10 Cabs are fine and can get loud for sure. But if your looking to have a good volume and tone combined then NO. your not going to get both with any 4x10 cabinet. I agree having use every name brand 4x10 cabinet on the market. But i never look back when i am using my 8x10E...

[@pmR32red]

Well done!... Thank you.

[@memozero13]

Awesome info bro! and thanks for your speech, i don't speak english, but i understood everything you said :D

[@kuhlmikeb]

Very clear, and thorough!

[@Andystonemusic]

Thanks really good info! A single 10" should suit me fine. Btw you could wire two 4 ohm cabs in series to equal 8ohms BUT if you are using two cabs you probably want full power not less but then it's not always half my mosfet amp is 75W into 4 Ohms and 50W into 8 Ohms.