How to run electric 100v circular saw with 18v battery

I hope you find this video useful and enjoy it!
I am happy to receive feedback, suggestions to improve myself.
!!! I'm sorry for the mistake if I did in this video !!!
Thank you very much for your likes, comments, and subscription!
Have a nice day
Gear Show

[@pramodravula138]

I'm a Huge fan of your work, I love the way you present your restoration and it means a lot to us when we are in need of such DIY restorations. My only request is to see you restoring a Table Fan and making it run with 12v Bosch powertool Battery and an 895 DC motor, so that it could serve as an emergency fan in times of power outages who's is very important for fathers of small babies like me

[@RyeOnHam]

At 15:14, the blade is installed backwards. At 15:16, it is magically swapped around! The magic of editing! Wonder how many other people noticed this.

[@gear_show]

Haha you are right :D

[@JohnyRalte]

Seeing your sweat drips from your chin as you rewind the rotor makes me appreciate your hard work. Keep it up and keep it coming.

[@patrickmorrissey2271]

I'm always amazed by your motor rewinding projects... That's not easy..... I was thinking near the end, "A better blade would help A LOT..." You got there in the end... Nice job....

[@gear_show]

Yes, thank you!

[@roycolglazier1061]

Without doubt, the most creative & thoughtfully done video, viewed on Y/T today! Very skillfully & intelligently done, a tribute to ingenuity, and a lot of fun for this old TechnoNerd to watch! Thanks! 😁👍❗️

[@gear_show]

You're welcome, I'm glad you like it.

[@TyinAlaska]

Great job. An increase in motor size and a higher amp battery could really help turn up the RPM, but with a good blade it'll get the job done, just not as quickly. Very informative and I'm excited to see you using this tool in your future builds.

[@gear_show]

I'm not yet satisfy this result, I should choose 0.8 mm coil for this rewinding. I will increase the RPM. Anyway, thank you for the tips.

[@WhisnuBabehWe]

That's awesome, Mr. Gear.. I like watching you repairing or modifying power tools.. it looked easy yet required some good skills.. 👍🏼👍🏼👍🏼👍🏼

[@WhisnuBabehWe]

Thank you for those who have dropped LIKE. I really appreciate it 🙏🏻

[@gear_show]

Thank you! I'm glad you like this kind of project.

[@WhisnuBabehWe]

@@gear_show I like modifying things especially tools, yet the limited needed items become the problems; not all the necessary items are sold in my country.. 😓

[@lolcec81]

Комментарий в поддержку канала и ролика, а также труда мастера отреставрировавшего.

[@FGSshopstore]

You are an artist. I love your work.

[@민-h9e]

I've been watching it well every time.I would appreciate it if there was a video about the reason, principle, and method of solidifying the existing copper wire. Also, please make Korean subtitles possible.^^

[@gear_show]

This tool is 100V, while my country is 220V.

[@RyeOnHam]

Solidifying the wire keeps it from creating a short circuit. If it is allowed to move, vibrations will slowly wear away the coating. This is a common cause of failure in electric windings.

[@lcampm2]

@@gear_show dangerous voltage

[@kimkhiienmayhungthuan2259]

Điện máy giá rẻ Hùng thuận kính chào quý xị, mời các bạn vào mua sắm

[@Kamidashi77]

@@lcampm2 And dangerous 50 Herz.

[@Eden_M]

More RPM needed in this case, still love your show, great job!

[@gear_show]

Yes, thank you I think so.

[@Eden_M]

@@gear_show Hey friend, I ran out of epoxy resin, can I apply polyester resin on a rotor windings instead? will it melt the enamel coating? Thanks!

[@aitorius]

Wow, what a difference between disks. Great job!

[@gear_show]

Yes! Thank you!

[@williambarrigaz8862]

Hey Amigo los nuevos genios de hacer los mejores cambios de 120 voltios a solo 18 con baterías 🔋 felicitaciones 👏 Amigo .

[@MYs0708]

When you upload a new video, I will laying down, and Watching your video 😂

[@gear_show]

Thank you so much for always waiting my video.

[@bhaskar0067]

Awesome❤ from india🇮🇳🇮🇳🇮🇳

[@gear_show]

Thank you!

[@ashfakvohra9913]

Good Very Good Work & Expert Technician. Instrument is Very good.

[@DTPTelectronic]

it's amazing

[@gear_show]

Thank you!

[@sddiymakeitworthit7512]

Excellent

[@gear_show]

Thank you!

[@ethanspaziani1070]

So nice to see you have a 3D printer must help a lot with projects when it pertains to restoring and reconfiguring stuff like this must be very useful!

[@manuelsoul1]

Ottimo lavoro fratello, avanti così 👍👍👍

[@gear_show]

Grazie!

[@OVERKILLFPV]

Awesome videos. You should do a fan next for yourself. Must be hotter then heck wrapping those.✌️

[@joaojuniorrib]

Perfeito 👏👏👏👏,ficaria visivelmente mais bonita com a bateria na parte de trás como as convencionais.

[@gear_show]

Obrigado!

[@Боард]

nice

[@gear_show]

Thank you!

[@vedantkaothekar8089]

Soooo much love from india

[@gear_show]

Thank you!

[@yeagerxp]

Excellent work👍👍👍. Thanks for sharing

[@gear_show]

Thank you 👍

[@justarideout]

Brilliant a real pleasure to watch

[@gear_show]

Thank you!

[@swaruppatra8823]

Perfect. Extraordianery Method

[@gear_show]

Thank you!

[@duranozkan1133]

eline sağlık gardaşş işin gücün rast gitsin

[@gear_show]

Teşekkürler!

[@glynprice3815]

Excellent work as ever.

[@gear_show]

Thank you!

[@domelodi]

Hi! Another fascinating material. I like your content a lot. I wonder how do you know what gauge of the wire to use, how many turns etc. to change a motor from 110VAC to 18VDC. Is there any math formula for that? Could you please share some knowledge or give me a hint what should I look for in Google? Thanks

[@gear_show]

Hello domelodi, I just understand a little a bit about magnetic field. I followed the 24V armature structure. You can buy few DC armatures, disassembly them than you will learn something.

[@kimkhiienmayhungthuan2259]

Hung Thuan cheap electronics greets you, invite you to shop

[@বেইমানসালমা]

Very good tutorial

[@MangeurDePoulet]

Ur very good, i would definitly loose my self into this wiriing lol

[@gear_show]

Thank you!

[@jasonmartin9393]

Great video my friend I think u can make any thing battery power would u think u could make a air impact battery power or a electric push mower that would be cool keep up the good work

[@gear_show]

Cool idea, thank you so much!

[@TyinAlaska]

I would really be impressed if you took your knowledge and applied it to an old ride on lawn mower!

[@gear_show]

Yes, that is an interesting project. I will try it someday. Thank you!

[@kimkhiienmayhungthuan2259]

Điện máy giá rẻ Hùng thuận kính chào quý xị, mời các bạn vào mua sắm

[@kimkhiienmayhungthuan2259]

Hung Thuan cheap electronics greets you, invite you to shop

[@Hackbridge1963]

I have a cordless 18v hedge trimmer. My friend took the battery apart and says it's too corroded, but the battery is discontinued. Is there a fix for this, Inn this channel or any other. I won't throw it away, I just need a battery. Thanks! That's in part why I love these videos, because things can be repaired if we only try.

[@gerardoneill1568]

Have a look at videos on KZbin on how to convert your battery to 18650 battery,it's easy if you watch the videos and try for yourself,I done one for my 18v drill and works great,good luck.

[@gerardoneill1568]

@@E-hab 👌

[@gear_show]

If you're difficult to find its battery, you can convert it to use with Makita battery 18V like I did kzbin.info/www/bejne/qpq0XoyZrcaKeck

[@vinceianni4026]

good job mister

[@MeilyFoodie]

❤️❤️❤️❤️❤️❤️

[@gear_show]

❤️❤️❤️❤️❤️❤️

[@Mustafa.B2]

Great work . What the gauge of wire and the no of round before armature winding.

[@mraksnajper8683]

Great job !!! I already checked under your video - do you have deep discharge protection on your cordless instrument? Thank you!

[@thestrangerthattalks9516]

I think the battery pack itself has a battery discharge protection

[@mraksnajper8683]

@@thestrangerthattalks9516 No, unfortunately this protection is implemented in the tool itself. if you connect a light bulb to a battery, it will discharge it to 0.

[@thestrangerthattalks9516]

@@mraksnajper8683 I meant inside the battery pack itself, see how he makes his own lithium ion battery packs. There is always a BMS inside everytime he makes one

[@hamradio599]

You did a very good job. May I know how to define 5 turns matching to 18V？

[@Shan-ij7rs]

Nice bro

[@gear_show]

Thank you!

[@williambarrigaz8862]

Veo que en la 2da oportunidad no olvidaste el aislamiento del enducido Amigo .

[@emrhcaglar]

Good job

[@bledlbledlbledl]

I notice you changed the field over to PM, rather than rewinding the existing stator. Was that for better speed control? Better efficiency? Or just so you'd have less rewinding to do?

[@luizantonio4633]

Belo trabalho, parabéns. 100 %.

[@pkf4124]

Whats the white powder you use to clean the case parts.

[@bangiffat966]

Komen ke 2 kang, di satu menit...

[@gear_show]

Thank you!

[@70_T_N_70]

watching late today 😆😆😆😆😆😆😆👍👍👍👍👍👍👍

[@gear_show]

Okay!

[@حسين-ج9ط7ي]

thank you teacher

[@xby2918]

Awesome❤️

[@gear_show]

Thank you!

[@mr.makeandtechtamizhan856]

Good job brother 😁😁😁

[@nourddinenourddine1107]

اعمالك رائعة أيها العبقري.

[@gear_show]

Thank you!

[@jacksonroad9263]

nice just need to tweak the motor.battery location id put where the cord was

[@Hackbridge1963]

@3:46 How long did that process take with the copper wire?

[@gear_show]

Around 20 minutes

[@BITTYBOY121]

Nice 1 👍👍👍

[@chintubagga6883]

Nice vdo all sir 👌

[@troyna77]

fantastic job!

[@bumohamedubualooy7111]

can u make a video about proper safe handling of circular saw, I'm hesitating to use one for the first time.

[@gear_show]

Trust yourself, protect your eye, start it without cutting any wood, after you feel a bit confident try it with the wood. After a few times cutting, you will be confident.

[@shadewgarage0136]

Amazing video ✌️

[@myrestorations]

Great video 👍 👍 👍

[@gear_show]

Thank you!

[@ahmednasser-yd1rq]

Where do you get the battery and the future?

[@michaelhodge9902]

Can you try this on a electric belt sander

[@delfinoguzman0713]

How do you turn the cordless into electric? 🤔

[@thomastechnical2075]

You are great

[@kgf_neetesh_yt5458]

😘😘

[@gear_show]

😘😘

[@aguswasito6089]

How much rpm is generated after you rewind like you did

[@camilof.pacios6844]

Bueno, para cortar maderistas vale... Pero malamente. Con mi Bosch de 1500 Guachs, corto todo.

[@AKNath-rg8rm]

Smooooooooth...

[@weedeaterkid666]

Can you tell me how I can print my own stickers for it

[@tatianadevena5364]

The best❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

[@Akc64]

Great, but what about balance of rotor?

[@gear_show]

Okay, thank you!

[@shahinshiblu3848]

Brather what is the name of your country????

[@thomasmcdonnell1957]

why do you remake the motor?

[@gear_show]

Because my power supply can't run this motor, so I don't have the motor information

[@ferko6]

👍👍👍

[@montvilds]

Слабоват получился. Толстую доску за раз не возьмет. Но сама идея интересна.

[@danggiacorp]

Có bán máy k vậy a

[@kravar]

is this motor case from PLA? It will melt.

[@gear_show]

Yes, it is from PLA. Let see it after time.

[@kusumchettri6513]

Op

[@tunahanugurlu8021]

👌👍

[@zainulabdeen203]

Please restore skill 12v drill with bettery🙏🙏

[@girolamonicoletti9619]

Ciao dove posso trovare il connettore della batteria. Saluti

[@gear_show]

Lo trovi con questo link detail.1688.com/offer/581131309931.html

[@girolamonicoletti9619]

@@gear_show grazie, ma non riesco a compilare il modulo dal sito cinese, sai se c'è un sito in inglese.Saluti

[@Myeong_ei]

I think that the power weak than original machine.

[@gear_show]

Yes, you're right

[@marcelonunes6766]

⭐

[@braydenh190]

The hell....is banana vinegar....?

[@gear_show]

Yes, it is banana vinegar.

[@Razmann1337]

I usually really like you videos. And the technical part is still very interessting. But it feels like, you shouldn't have saved that thing. Rpm seems way too low for a circular saw. The blade is shaking like crazy, so no straight cuts... You´re cutting wall plate with a crossbar blade AND there is no splitting wedge. Do yourself a favor and don't use that unsave machine. Still thanks for the entertaining content. Looking forward for more tools, that are hopefully more worth of beeing saved.

[@gear_show]

Okay, thank you for sharing!

[@makitabelgorod]

ok

[@pachecoCardososilva]

Gostaria que tivesse usado um motor DC 775 ou mais potente

[@alexandres8846]

895 dc motor more power!

[@gear_show]

Okay, thank you for the tips.

[@joaquinvidela1554]

alambrico vs inalámbrico Sierra circular

[@m0sh1994]

try this with angle grinder pleas :)

[@gear_show]

Yes, I will do it, thank you!

[@espinozajorge7]

Poca fuerza

[@DenisSTALKER15]

чел ты чё, 2 часа по помойкам бомжей пинал чтобы найти эту железяку?😹😹

[@ElektroTechNL]

Its to weak to cutt.

[@gear_show]

Yes, it is.

[@abdelhakimbouamama2465]

I have an old impact wrench. Is there a way i can send it to you for repair I live in france Do you have a website where i can get your mail address

[@kenhbinhluan7293]

Không đủ tốc bạn ơi Vết cắt xấu

[@danieljrpeters6637]

The circular saw turned out weaker than it would of been if it were powered by mains electricity.

[@naimkrasniqi3036]

🙀

[@ahmedahmadey5136]

Please tell me your name😭

[@abhishekgourav6144]

Motor's gonna stall

[@newface14k]

please 220v to 18v

[@gear_show]

I think it is the same.

[@logangebhard391]

1sr

[@gear_show]

Thank you!