Gearing up for Harvest!

[@xavier3961]

Great to see you again. Know that you are busy and Farming doesn't give much time for play.

[@smcox1991]

Everything about that place is setup nice. I always love seeing all this giant equipment. In my neck of the woods you don't see equipment that large due to the fact there isn't thousands and thousands of wide open acres. Biggest tractors around here are probably 250hp on big square balers and even that is rare as mostly everyone bales small squares.

[@Farmable]

Every farm is a different size and all of them operate differently thats what I like seeing on KZbin and how we are all different. Depends on the area too what we can and can't grow.

[@pgrafton]

Love your philosophy on MM tractors. They were amazing pieces. Had two Minneapolis-Moline 670 5.5L 4-cyl LP gas. I thought they were from 1967 and 1968. 67 was our wagon hauler, manure spreader, 68 our primary field tractor in the early days on our dairy farm in south central WI. Really enjoy watching modern farming from MN.

[@tonnymiedema9165]

I would like more videos as other people have said but the videos you do put out are awesome and well put together. Keep up the good work educating us

[@koryleague8833]

I'll watch anything you post. It's great to listen to you and your knowledge. Awesome video loved the little equipment tour

[@Farmable]

I need some ideas on my channel if you'd like to check it out!

[@garlandremingtoniii4679]

Man. You and your family have sure been doing a huge amount of work in expanding your operation !!! Excellent!!!!!

[@thedonleroy]

Great to see another video. I'm not too far from you I think I'm south of Fergus Falls. We have had around 4 inches of rain here. We are also a ways out on beans here. I like the new ripper, we bought a different on last year & it is nice. It doesn't push on worked ground like the old one & replacing the shear bolts on the shanks is much easier than the old one. Ours is red though. A case 870.

[@MillennialFarmer]

thedonleroy We ran a case ripper 2 years ago and really liked that one too. We're south west of Alexandria, near Lowry.

[@benburns5995]

Thanks for posting this video. Noticed your new bin is a GSI. My brother just is in the process of building 4 GSI bins 30,000 bushels each. Hope your harvest is profitable and goes as smoothly as possible. Appreciate filming a video being so busy.

[@samtalley791]

Hope you guys have a good harvest. FIL lives an hour or so north of the cities and last I heard guys in his area were starting silage corn.

[@Farmable]

What is FIL

[@samtalley791]

FIL means Father in Law (wifes dad)

[@Northern_Farmer]

Sweet shop!!!

[@westernwifarmer9770]

Well hopefully the weather turns and we can all get going and get the beans off. Corn is gonna be wet but we'll get through it. Be safe

[@kylekrzewina1135]

maybe just make a few couple minute videos from the cab while harvesting. short and sweet and you wont have to edit...its up to you. I always enjoy your videos.

[@B.E.Long.63]

Mpls Moline, i grew up 3 blocks from their main plant on lake street and minnehaha, yes i'm that old. i remember riding my bike around the building in the 60s, and yes it was a Damn BIG building, took up around 3 or 4 block area.......thanks for sharing my friend...

[@ryanlochtefeld1125]

This is the 1st video of yours I remember watching, recording quality has come a long way since then lol something we all take for granted now.. Keep up the good work!

[@lazeras88]

That’s one job I don’t miss making and fitting feed systems

[@loadpin]

You have a great operation going there. Looking forward to your upcoming harvesting videos and also seeing that new ripper in operation. Stay dry as you can and be safe.

[@MillennialFarmer]

loadpin thank you!

[@TwoHappyChildrenFarm]

It's just amazing how efficient the handling operation is. Only missing is a rail spur. Impressive.

[@paulcoulter7181]

I wish that you would post more videos.

[@MillennialFarmer]

Paul Coulter I'm going to try to again. It's tough when we're busy, and sometimes I have computer issues that I don't know how to fix!

[@paulcoulter7181]

Yeah I've really enjoyed all your videos wish you had a daily or weekly post

[@Farmable]

I'm in the same boat as him. It's hard to get out a video every week when you need to focus on your full-time job and the more important things. We try to get as much video as possible to share but sometimes we forget and fall behind.

[@MillennialFarmer]

Farmable One of the biggest things I struggle with is that I'm always working around other guys and the last thing I want to do is put a camera in their faces while we're working. That's why I'm usually alone in these videos...

[@ReolSPro]

it does not have to be 17min all the time lol, 3-5min vids would be great too

[@bradsmith7106]

Hey if you have a slow day and need to make a video you could do a full tour of your shop for us people that want to see it haha :)

[@MillennialFarmer]

Brad Smith I might do that. It's still pretty unfinished in the break room and office!

[@bradsmith7106]

MN Millennial Farmer you could show it to us now and then update us when it's done haha

[@Farmable]

He just did this the other day so good idea hahaha

[@FarmingLifeCroatia]

Finally a new vid, great job mate!

[@sebastianstickley1453]

Farming Life Croatia k

[@bryanplumbly6846]

Farming Life Croatia saintsbayhotel.com/index.htmle

[@rossgalesk5034]

Farming Life Croatia I

[@oliveraunli1508]

G

[@jodiconley3886]

Farming Life Croatia 🇭🇷

[@mccoysfarming6278]

Thanks for the video!! Miss your videos! Hope you get time to make more! 👍🏼

[@fastsetinthewest]

Another new suscriber. I've worked with the IRS. Nice video and lots of money moving around.

[@thr8061]

Any video (new or old content) are great. Just seeing y'all in the fields, seeing you maintain equipment or showing your grain setup are awesome.

[@jamespowell3173]

thr8061 u have the best faming video's . Keep up the good work

[@Jack--mu3gs]

Love the small “toys” biggest tractor I have been in has been a John Deere 6290r

[@andrewbell4139]

Quite the operation. Still have some old crop corn here too to haul. Just wrapping up sweet corn harvest for the year, and ready for soybeans if it ever stops raining here in southern Minnesota

[@bnsfbandit9807]

Man this is cool! Seeing a first person view of a farmer!

[@curtweatherbee2523]

You're doing just fine👍🏻 keep the videos up and I'll keep watching South Jersey LCW frog hollow farm 🐝

[@rongrose3746]

Very nice set up and equipment !!

[@Jeremy_811]

Wow I never realized how nice of equipment you had

[@MillennialFarmer]

jeremy the cool Thanks! We don't have much for brand new equipment but we try to maintain our stuff.

[@lowellwalter9420]

Simple videos during harvest would be great. They don't need to be edited. Short and sweet

[@57fitter]

"If you don't love MM, you should!" Love it!!Thanks for posting,Nathan 57 BTW we're about a week out from getting going, maybe less- snuck up on us! Also, Need more truckin' with Gaga ; )

[@wdesign1189]

Thanks for that grain bin shot. Now I’m gonna have harvest flashbacks/nightmares...

[@madflyer1093]

kinda neat to see the raker on the bottom of the bin. i delivered a couple to a farm in north dakota a few months ago.

[@landonroberts3261]

These videos r awesome I just started watching them like a mouth ago and I love them!

[@kennethfuselier5252]

Y'all got it going International Falls Minnesota I worked there before in 1989 and 1990 we built the big paper mill there I'm down here in Louisiana we plant saw beans and rice and a little corn down here lot of rice

[@Thehorrorboat]

Wow i should do that job someday

[@brettbaumgarten]

You guys have a 9870 too!!!

[@bradykice8759]

There's no stiffners on that 48 foot gsi bin and it's a split floor. I used to work for a grain bin building crew over the summer and we only put up GSI bins.

[@MillennialFarmer]

Brady Kice This is out first GSI. Nothing wrong with our Sukups, but our builder switched.

[@bradykice8759]

Ah but like what I was meaning is that I have never seen a GSI bin without stiffners and when we built them, we never used a split floor but I hope you have great luck with that bin

[@ReolSPro]

best explaining job from u like always

[@prestonmeadows3564]

I’m going to subscribe now you are very interesting and explain things really well you are also a John Deere fan.Farming is my future career.🦌

[@KuKoKaNuKo]

Great video... I love learning about farming and this video taught me quite a few things. You're very informative, I appreciate it.

[@mikeybosco6875]

nice clean tractor shop nice grain dryer awesome video

[@DiscGolfing]

Videos dont have to be new, just give us content :)

[@nickolairobinson7809]

PHPistols u have absolutely no fucking clue what happens on a farm! Chill out

[@DiscGolfing]

I don't? I grew up on a farm raising beef cattle, and had corn/beans. I have clue about what? I just simply stated that I'd like lots of videos from him and that it doesn't have to be new. No idea what you're so upset at me about stating that. I was perfectly calm making this comment and was actually laughing about my comment when I made it.

[@OhioAgVideos]

2:30 How little he knew it would take 3 years to get that conveyor put in lol

[@Everythingisgoingtobealright]

Beautiful operation. Thanks for sharing.

[@nancypillai8791]

Everythingisgoingtobealright I

[@AndersonFarms]

Sounds that harvest might be a muddy one. We have been getting ready for harvest as well. We were going to try some beans Sunday but it was suppose to rain. That is a nice bin setup. Have a safe harvest.

[@MillennialFarmer]

Anderson Farms we got another 3-4 tenths last night

[@AndersonFarms]

MN Millennial Farmer good luck getting the crops out.

[@curtmyers9814]

Nice video. I hope you send a video of the 8360 pulling that ripper. I think you might find you got more ripper than tractor. We're in southern mn, steel county and we setup our 2700 to 9 shanks and pull it with a T9 435 and thats a load for it. We also have a 870 cih 11 shank which is pulled by our 600 quad which will pull it good and when that goes on nitrogen the ripper will go on the 9630t and theres time we have to go to 9 shanks instead of 11. We've got some pretty heavy ground and hills. We run 2 9870's and 2 635 flex heads and one combine on 12 row corn head both great combines. We took one load of beans yesterday and even with the green stems they was 11%. Have a safe harvest

[@michaeldierks3708]

Nice video. It’s very interesting to see what you guys have got going on around there. Best part was the Minneapolis Moline!

[@ugly1354]

Thanks for the update, a vid on some crop issues might be nice to hear what things you deal with and how you combat with them. We have a ton of white mold and our corn became deficient on nitrogen and potassium earlier than normal. Also weeds got out of control in our area late. Our coop was talking about gosses wilt, are you seeing any? Thank you again for the educational vids you are putting out

[@jordanstone7478]

love this vidoe you should walk us thru all the equment like one or two a day for a month

[@maineman11]

Maintenance & repairing videos would be cool. The trucking video's are cool as well.

[@LandonHarris.]

that 9870 is a beast of a machine!

[@MillennialFarmer]

Landon Harris We love it!

[@jeremyvonkeman4900]

Just found your channel! I love the content! I’m a farmer/truck driver as well!!

[@MillennialFarmer]

Jeremy Vonkeman Thanks for watching!

[@Farmable]

Share the love on my channel would ya! hahah

[@jeremyvonkeman4900]

Farmable heyyya not a problem!

[@robm3419]

Love the comment about the Moline

[@Farm382]

My pre harvest check is kicking the tires and if there not flat you start harvesting

[@MillennialFarmer]

🤣🤣 good enough!

[@Thehorrorboat]

Maybe i should harvest in florida

[@TeezleySPT]

Gotta spend it to make it! Good video

[@Thehorrorboat]

How do you feel about the tanzanian war in uganda

[@westernwifarmer9770]

100,000 bushels to haul in Spetember is alot. How long does it take you to fill a semi out of the Leg? Hope your basis is better than ours??? Here in Western Wisconsin its 75 cents on fall beans and 65 cents on fall corn. Storing all the grain you can will definately pay off this year! Have a safe harvest out there!

[@MillennialFarmer]

WesternWi Farmer We contracted it a couple months ago and we felt it was a fair price (all things considered right now anyway...), which is why we sold so much at once. We run 3 trucks and when things are going good we can load 1 in about 9 minutes.

[@williamhamill813]

Do more in depth repair and maintenance vids. The format Onelonelyfarmer has is good.

[@MillennialFarmer]

William Hamill I would like to but I don't think the other guys want me pointing a camera at them while they're working!

[@case315mag]

We just got done putting up a 42ft. x 13 ring 60000 bushel bin.

[@kurtpyrah]

Great looking videos. I like the Green Equipment. My favorite. I am in Idaho and like the weather here. Minnesota is too cold for me.

[@MillennialFarmer]

Kurt Pyrah it's usually too cold for me too!

[@wbball15]

Thanks for sharing. Watching from SW Iowa.

[@kajomelimaelvitrev]

Wow! Great to see Tony Romo doing well. Farming! Who knew!

[@jamesd6972]

Hey I was just busting your chops bud I love your shows n all the nice green equipment

[@kennethfuselier5252]

I wish you would post more videos of y'all

[@jacobmiller6543]

am grow up working on a miller and hook farm am still work on my uncle farming hhfarming butler Indiana county folks

[@jameshilts5285]

Want to see the ripper going across the field

[@just-incase3483]

James Hilts that jd won't be able to pull it, he needs a case IH !

[@MillennialFarmer]

James Hilts If you haven't seen it yet, I made one about 6 weeks ago!

[@MatthiasSchulenburg]

Catching up on the older videos. Great stuff, and I am sooooo glad you don’t say “you guys” in every sentence any more! It is a very annoying phrase, for some reason.

[@2fast65]

great video thanks and have a safe harvest.

[@jeffstewart82]

I Remember a long time ago when I was a kid my dad having a John Deere mobile grain dryer running off PTO of a tractor. Have you ever seen one of those? This was probably early 80s.

[@MillennialFarmer]

Jeff Stewart I haven't! That sounds interesting!

[@byrongrochowski3644]

How does he keep his stuff so clean an spotless and especially rust free?

[@MillennialFarmer]

Byron Grochowski the camera makes it look cleaner than it is!! But we do you our pressure washer A LOT

[@Diamond_Z_Cattle_Co]

Don't I remember you saying that you have a dirt late model? That would be cool to see I'm a late model junkie myself! Lol

[@MillennialFarmer]

Zach Diamond Z Cattle Co. Yes, my dad and I have a dirt late model (I drive it) and I also drive a wissota modified for another owner. I've debated making a video of racing but I'm not sure about mixing the 2 (farming and racing).

[@brinkme1772]

Maybe I missed it, but did you explain what the maturity #s mean in a previous video? Glad to see you posting more video again!

[@MillennialFarmer]

BrinkME I did not. I would actually have to do some research to find out why we use the numbers we do for soybean maturities...

[@brinkme1772]

igrow.org/agronomy/soybeans/soybean-physiology-relative-maturity-explained/ Short explanation, but it helped explain it for me.

[@jkelsh]

13:30 That's precision agriculture right there! :-D

[@DMSparky]

Neat to see behind the scenes from a city slicker like me.

[@MillennialFarmer]

Daniel M cool, thanks for watching!

[@Military-Museum-LP]

Nice shed!

[@stanleyjones4180]

great machinery you have there thanks for the video

[@kevinfarmer5895]

Thumbs up

[@Farmable]

always

[@d6joe]

With all the nice equipment, I am surprised you do not have air bars on the flex heads. Fast payback.

[@MillennialFarmer]

d6joe There are a few guys around here with those but I don't have any experience with them.

[@garlandremingtoniii4679]

I hope that CensorTube is not demonitizing your videos like they have so many!!!

[@howardyounger5456]

coo;l tour thanks. that disc ripper is nice. it would be a pain in wheat stubble that is soft though i beleave the discs would not turn good. better if there is a whole gange. really love your videos. thanks for making them.

[@ml2trick]

Sweet Work Shop. Looks like lots of work. Hey From Central Wiscosnin.

[@MillennialFarmer]

ml2trick Yo! Thanks for watching!

[@sbrown7210]

Look at all that Green.

[@whitewips1]

You do a nice job on the videos. I miss farming and used to do it. I am now in Law Enforcement. I would love to come help out for a few days in the busy season free of charge, just feed me lol. I miss combining and just being around and wrenching on equipment. I have ran a lot of different machines and know how to drive a semi. So if you'd have me, Id love to come help out! Jeff from Brainerd

[@nickblank402]

Man I would love to have you're shop awesome video

[@MillennialFarmer]

Thank you! Having the shop has been awesome

[@rogerwilson9361]

The overhead conveyer system good ideal give space to move between bins and faster movement on corn or soybean the unloading from the bottom and loading from the top less use of one system to move all of corn and soybean when have to move it to be dry or loading of trucks.

[@hudsong5498]

Your red semi looks just like the one on our farm

[@MillennialFarmer]

Guidinger Family Those T800s are good trucks for on the farm

[@hazellagriculturalservices3614]

Very impressive grain storage

[@alexandermattjus9492]

I'm a farmer from Finland.

[@ianrobinson1589]

Another great video Thank you

[@grantbetts6564]

good looking john deere there. love them combines. my family owns about 8,ooo acres here in Missouri. and we have mostly john deere tractors and combines. I'm wanting to see those combines in action with a big bean header like that. how big is that header.

[@MillennialFarmer]

Grant Betts 35 feet!

[@PristineAutoDetailing]

Clean farm shop!

[@banjobenson9348]

greetings from Idaho, I grew up in Benson area you don't need anything special to post, just the normal harvest is interesting to most of us out here, the new equipment and technology is so interesting . and of course that always ugly weather out there. any pheasants out there this year ?

[@MillennialFarmer]

Banjo Benson I've seen a decent amount. Still nowhere near like it was 10 years ago though.

[@Farmable]

I've seen a ton of pheasants in the spring, almost ran a few over with the tractor actually lol

[@jasonprocai1020]

About dam time, thought you quit us? No new spayer videos, how about a full equipment run down? Glad your back !!

[@88jayhawks88]

What was pulling the 2730 when you demo'd it? Do you really think a 8360r will pull a 9 shank? We bought the same ripper (2730 foldable 9 shank) and I'm a little skeptical that our 9530 will pull it. We're in heavier/hilly ground south of the Twin Cities. How deep are you going?

[@garlandremingtoniii4679]

That new big LP tank will save you a good amount of $$$$$

[@MrPlaasjapie]

Great video. Really nice machines.

[@MillennialFarmer]

Quentin Coetzee Thank you!

[@omarmata4206]

Add videos of you working on your machines mate! Show us what's broken and what's not. :--)

[@tspielm21]

very well done!

[@thcenterprisellc112]

Love your workshop mate! Just subscribed to you keep up these good vids !

[@MillennialFarmer]

THC Enterprise LLC Thank you!

[@waterskiingfool]

Did this new grain bin survive the tornado?

[@noelhohberger1188]

You guys got a sweet shop

[@MillennialFarmer]

Noel Hohberger thank you, we had it built about 4 years ago to replace a building that collapsed in an ice storm.

[@noelhohberger1188]

MN Millennial Farmer very cool!