Cooler Master 360/240 Atmos INSTALL GUIDE

[@JohnDavidSullivan]

Props to Cooler Master not just for upping the game and making this in house, but also their efforts with regards to reducing waste packaging and the instructions on the boxes. Pretty simple and actually pretty genius.

[@appualliyanaa]

@@JohnDavidSullivan actually i guess the paper manuals are better rather than scrolling up to another page up and down to check the code of the component again and again. Maybe cause i am building after 10 years and a lot have changed

[@remy090]

The box is great. But I wish it came with a proper instruction manual tbh.

[@jamesbarlett246]

I really appreciate the mounting hardware coming in their own boxes and properly labeled. Normally I end up keeping all of the packaging and it takes up too much space. Also great seeing some manufacturers for cases labeling the plastic screw box. So much easier to identify them.

[@phil_matic]

Cooler Master has stepped up their visual aesthetic so damn much over the years I truly believe they are making some of the best looking components out there right now. And it all started from one simple design change, and that was to remove that hideous text from their logo.

[@livinglegendrey3100]

hahahaha for real, that CM logo sucks

[@Watch-Kiran]

Perfect detailed explanation, as i was looking for perfect detailed video, there was none until today. Thank you so much

[@Rumikiro]

Thanks for the video man. My first AIO install on an older Corsair Crystal 570x. Took me awhile to figure out I couldn't mount a 360 to the top but it had to go in front. Your instructions got me through it. Appreciate you.

[@damau5687]

Been waiting for the 240 to launch here in India...this guide will help once I get it. Thanx!

[@IsCarryingACuriousMap]

Would have been absolutely lost without this. Thanks heaps mate!

[@GearSeekers]

Glad I could help!

[@noxxiisproject2075]

That looks quite nice, anyone who's doing a cooler master build should get this

[@eternaljoker99]

Just a heads up, if you want to use the software, I believe you have to use the included rgb hub. I plugged my atmos 240 directly into the motherboard's argb header and it won't show up in any of the Cooler Master programs, but the rgb does show up under Asus Aura (I use a ROG Strix B650E-I itx motherboard in a Dan A4-H20) and is controllable there.

[@atta1798]

r u using he the 240 for a 7900X? trying to decide between that n the 360

[@liltesla]

thanks! this was super helpful. finally installed my atmos.

[@ARDREAMCOLERA]

Hello. After 2 Months. Are you still happy with? And can you turn off Fan Rgb while still having them turn on on the pump?

[@Games_and_Tech]

Best package system for an AIO, other companies should take notes

[@MG0301]

The pump design looks very cool and pretty NGL

[@freedomdst]

the software might not be very good, but the Spectrum effect is very nice, i prefer it over the regular rainbow one and most other premade effects in other softwares.

[@Dave-J.E.T.S]

Exactly

[@freedomdst]

too bad my atmos pump died in a month

[@AznPhatty]

This has to be one of the best packaged AIO and those instructions are great. Love the design.

[@issaedits3350]

nzxt lcds still my favourite

[@Henrique-wv9xq]

wish there were some video reviews comparing this one to other 240s

[@건우-d2h]

Thanks for the good video. I'm using a b450 mainboard right now, so I don't have a 5v argb 3-pin port. If I use the controller in masterliquid atmos 240, can I adjust rgb on the cooler master app even if I don't have a 5v argb 3-pin port on the board?

[@zachfarris69]

That is crazy, I'm literally incapable of installing this cooler after purchasing it. I'm upgrading from a previous aio and no longer have those inserts to install the standoff. I dont remember ever having them tbh but it has been 4 years. Edit, I was able to buy a new backplate on amazon for $9

[@ayojords]

Another GearSeekers W!

[@terronedilordran1693]

i'm new in pc building and i have heard of liquid change about liquid coolers in general. what does that mean? changing the liquid inside the tubes? i dont know please let me know since i want to buy the cooler master 360

[@tonychan1031]

Great video 😀

[@sergeymerkulov2737]

Thanks for video. Perfect.

[@bruhhhhmoment4848]

I thinking about getting an APNX C1 case and it comes with a hub for the rgb fans already in it. Could I just plug the rgb cable into an extra argb port in it to sync the lighting with my cases fans

[@rickgear2579]

I see a cease and desist coming from Dolby over the name.

[@Yoda_Koda_]

can you still use other aRGB software with the controller installed?

[@mirkodiciano4647]

those clips that are included are dope, nice one guysnickemoteSmile

[@buzzfunk]

Why does the manual display the fan mount the wrong way? The way the manual shows it - the power cables will be in front. Really weird to have the pump cables go by the back fan of the case.

[@jasonscottsego7311]

I've daisy chained the fans as shown, but there's no RGB. I've watched this again and again, do you not need one connected to the rgb header on the motherboard?

[@GearSeekers]

It was shown in the video

[@gabrielirvin8167]

So I have the 240 on my pc build just installed. I was wondering on how the cooling works. Like do i have to put water in it? Or does it already come it in. Im doing my first pc build so any info would really help!

[@ALPHA17I]

It is an All in One (AIO), liquid cooler also called a CLC (Closed Loop Cooler). This is because the cooling liquid is pre-filled in the system and then it is all closed up. You do not need to add any water to the ATMOS, just wire it up correctly, and it should cool your CPU just fine.

[@gabrielirvin8167]

Omg thats the best! Thanks so much I actually really appreciate that! I get my graphics card tomorrow super excited!

[@gabrielirvin8167]

I don’t have a cpu-opt or aio plug in on my motherboard what do I plug it into?

[@ALPHA17I]

@@gabrielirvin8167 what motherboard do you have?

[@Kilohotelwhisky-u8o7q]

Is it compatible with Asus Aura Sync?

[@zerotwo57]

Yes if you don't use the controller

[@acloudyboy]

my one didnt come with the sata to 2pin connector for the rgb

[@Farly98]

You left out the step on installing bracket behind CPU.

[@salehabdulla9177]

This cooler or Lian li II lcd 360 for 14900k?

[@rodhester2166]

Great video, Curious as to the average life span of todays AIOs

[@fisher_price]

What are the length of the tubes?

[@sprukeii]

Would the 240mm version fit in the lian li a4 h20 mini itx case?

[@livinglegendrey3100]

Yess!

[@profile1365]

Are those cable holders at 9:20 sold separately.

[@pauloDG]

No, there are exactly 4 in the kit.

[@atta1798]

For the three fan cable from the mother board the red connector has 4 contacts instead of three......so?

[@flaccus123]

It's red to remind you that is the 4 pin pwm cable that goes into your cpu header. This provides the tach signal to the other 2 fans which are 3 pin.

[@pauloDG]

I want to share an experience regarding my PC setup. I purchased a 14th-generation i9, known for its high temperatures. My colleagues with the same processor and I have tested various AIOs and found that the one we chose offers the best performance and quality. It was so good that even though my unit arrived with a defect, emitting a strange noise from the pump fan, I decided to replace it with the same model. On another note, there are other AIOs in the market that seem superior due to their high price, but they aren't. From my experience, NZXTs lack sturdy construction and are too expensive for what they offer; with them, the processor ran slightly hotter compared to the Atmos 360. Although the temperature difference was minimal, the sound was noticeably different. Regarding LIAN LI AIOs, while they are good, they don’t match the price-quality ratio of the Atmos 360. If you're considering a different AIO, my second recommendation would be ARTIC or ASUS. As for a third option, I don’t have a clear preference.

[@riktamsarkar7684]

I brought this today and it is making weird noise please do help me out. Is it air that causing the issue? The noise is unbearable and how can I reduce the fan speed? Please do reply

[@pauloDG]

“The sound is coming from the pump? If so, the same thing happened to me. I recommend that if the sound is from the entire system, it might be bubbles, and that’s normal while the system settles. If after a while it continues the same, you can try removing the radiator and moving it a bit. But if it’s the pump, I recommend changing it. I had the same issue and decided to replace it with the same model because this brand and version are very good, and it’s the only one that kept my i9 running at good temperatures.”

[@cannotkazi]

Hey bud did you just solve it through replacement? Has been a week with mine. Hunting for tips. Got recommended to run pump 80+ flat out. And since then a buzzing gradually grew from the pump and is now quite jarring. Any input by anyone would help, As I'm not in a warranty eligible region. Case: Ap201 Rad top. No exotic mounting. Sound definitely emitting from the pump. Temps unaffected, Functioning within spec. It's just the static like buzzing that's really sullying my whole experience cus i keep thinking about how it might just die anytime now

[@riktamsarkar7684]

@@cannotkazi It took a week for me and yes the above guy was correct it was just air bubble. I will tell you to wait for another week and see if the issue is resolved. Look at your replacement policy if it is ending or near ending then replace it now.

[@cannotkazi]

@@riktamsarkar7684 Oh cool. I suppose then your sound was emitting from the Radiator. Sadly mine's definitely coming from the pump end. Yikes. Oh well. Sound advice. Will do. Thanks for writing back so quick! Appreciate it.

[@sirsmeghead]

Do the cooler also have Dolby Atmos? 😊

[@mikebaker2927]

Shouldn’t the pump fan cable go into the cpu fan header?

[@GearSeekers]

No. Big misconception. That is only for boards that complain about not having a CPU Fan plugged in

[@psyber84]

too many cables! Which one is the best performing 360 aio WITH NO RGB?!

[@theduderlife]

@@psyber84 I didn’t even plug in the RGB cables cause I don’t use RGB and it works great. I just use the PWM amd plugged pump in.

[@arielgarcia9329]

Me: my name is deez X: deez what? Me: 7:26

[@thomassimmons2989]

It’s a shame the mounting hardware isn’t black to make it look a little bit more premium

[@oscarcharliezulu]

Jim’s mowing?

[@dancoways]

Surely Dolby gonna have something to say about this? lol

[@meza5207]

Link ?

[@GeekShhh]

6:01 Oh wow thats new

[@vinishooter]

Anyone have experience with this cooler? For AMD Ryzen 7 7800X3D? Please give me an explanation! Big Thanks.

[@pk.002]

It should be very good, 7800X3D has low power draw. I plan on getting one also for mine. You can even air cool that chip instead if you prefer.

[@remy090]

This is a 4 month old comment, but I just did a build with this cooler and a 7800x3d. Cooler is good. Software for it is god awful. Kept causing fan spikes. Use software to set RGB settings, then don't run it again. If you want to find something to check cpu temps, use a different software.

[@SyntaxSinner]

I got a cpu fan detection error

[@mahmutcalka]

@@SyntaxSinner bende aynı hata var alıyorum

[@XmXStuka2]

Is the process of changing the fluid similar to installation?

[@OmniVisionElite]

FOUR OF THEEEESE NUTZZ

[@TheA340pilot]

Is it possible to keep the tubes on the front side of the case???

[@rockymarquiss8327]

I'd think it would be easier to put the thermal paste on it just before you put it on the CPU

[@remy090]

Just a heads up to anyone here installing this cooler. DO NOT use Cooler Master master control software. Or, at least, use it to check temps once, and set RGB, but then exit it out, make sure it doesn't run in background. The software was literally causing my AIO to spike randomly AND even when I plugged in my Iphone to charge. Took me ages to figure out why it was happening, evem after changing fan curves in bios. Summary. The software is beyond horrible.