Lian Li O11 AIR MINI: They Finally LISTENED!.... sort of

[@j.b.7133]

Such a positive dude, I love this channel. I plan to listen to your music when I build my comp soon. Gotta pay homage! Cheers from Canada!

[@ithinkitmightbe]

I was tossing up getting the mini, I was only holding out because of the sfx psu. It’s the perfect case for me, I like it.

[@gdeeable]

I ❤️ mine, despite its shortfalls. 👍🏾

[@blackknight50277621]

yep, 90 deg 2 sides glass is O11 signature look

[@MrLincoln87]

Whats wrong with SFX psu's?

[@chrisandsofia1919]

I think folks have a stigma about SFX PSUs but the current crop from Corsair, CM, etc, are solid. I'm running an 850w unit with a 3080Ti and it works just fine. That said, I'm sure Lian Li will release a Mini v2 with ATX PSU support in the next few months.

[@gdeeable]

@@chrisandsofia1919 Totally agree. I have the Corsair V850, and the reported fan noises have NOT been an issue. Its a solid performer.

[@thiccnick277]

Lian Li should just re-release the mini that can support an ATX power supply. The rest can stay the same, if not include an offset bracket for allowing top 360 AIO support without zip ties or a custom mod. I'll skip on the Air mini, missing out on rad support is a no-go.

[@lzyhns5325]

agree, Lian li should read this.

[@marwanashraf1394]

yeah, it's crazy that everytime they add something, they take something else. if we can have a small case that can support atx psu, noctua fat coolers, high airflow, "better gpu thermals", and thinner bezels of the glass to make the insides like a bit roomer and better, 3 fans on top and 3 fans the bottom, i'm sold on it right now...

[@unironicpanda]

What case are you talking about?

[@nimrodery]

@@unironicpanda 011D mini

[@liantechtube7921]

I hae seen people fit a 360mm aio

[@inmypaants]

I feel like making this slightly longer to accommodate a 360mm radiator would make this the perfect multipurpose case. It can accommodate all motherboards, all PSUs, tons of cooling, the biggest air coolers etc

[@ErgonomicChair]

Ehhh nah... I bought this case specifically because its 2cm shorter than the previous one, it fits my length needs perfectly... well, tbh I would like it to be even shorter haha, but yeah 2cm longer and I would not have bought this case.

[@GalvanisedRed]

The Air version of the case is likely made with air cooling in mind and not radiators, hence the changes you had some complaints with.

[@MrDvneil]

you right. my complains is, Is feet heigh enough for correct gpu airflow?, if you are using tower cooler at cpu, why not rear mesh? to setup rear intake. rear intake and flipped fans on the cpu cooler, prevents reflow. front intake with top mesh, makes most of the air from front to go outside before reaching the cpu. and cpu fans reflowing some of his own warm air. they should have made bottom simetrical to top, same design, and allow to move feet, from "bottom" to "top" so you can rotate the case, and make the gpu intake on top allowing maximum intake for it.

[@GalvanisedRed]

@@MrDvneil you could always use both front/side intakes which would force so much air in that it simply forces air out everywhere, I would also likely not put output on the front top slot.

[@GearSeekers]

It doesn't matter. People buy cases to build what they want. Not to be told how to build

[@MrDvneil]

@@GearSeekers totally true

[@GalvanisedRed]

@@GearSeekers I get that, but at the same time I wouldn't buy a tiny car and be surprised it can't have a V8. Though they should update the o11 mini to support atx psu for the water cooling people.

[@MarcoGPUtuber]

Now let's build a Windows 95 PC in that!

[@shimuzeisusu]

With a GPU from Taiwan. Haha. Hello

[@ties9123]

Marco

[@therealsunnyk]

In some ways this is a great case, because it's small but still "full size" in every way. You can take an ATX case with fullsize PSU and air-cool it, which I think is the most common real-world scenario, with positive airflow and the chimney layout, it's definitely one to be copied. I wish they'd actually go the other way and do a "micro" version of this, where the height is mATX, with SFX-L PSU support, and you can do ITX with watercooling. If you made it 2cm longer than this case it opens everything up even more for RAID + big GPU setups in a very compact chassis.

[@gdeeable]

They should have paid you a consultant fee, royalties and made a MUCH BETTER case -- SERIOUSLY. IMO, two steps forward, then three backward. Beautiful case, though. Sticking with my original PC 011 mini. On a more positive note, I was so hoping you'd do a build with the Gigabyte x570s AERO mobo. 👍🏾 Thank you. I just received mine. Hoping to feel up to building soon. I love the work you three (Bindie) are doing. Keep it up!!!

[@ciawarhater]

Imo without glass in front it loses that specific O11 look ,and just looks like most cases

[@dlam5342]

I'm with you. It looks like a fat meshilious now

[@slinkywizard]

@@dlam5342 Lian Li "Phatlicious"

[@Ineluki_Myonrashi]

As a user with an O11D XL, 011D, and 011D Mini I'd definitely agree with you. This iteration loses the lineups distinction that makes them different.

[@senoaji9056]

Corsairs Crystal 280X alternative yes

[@Daisudori]

I really like this look also tho. Finally a actual minimalist mesh case without weird shapes or alot of plastic.

[@leeuniverse]

*The below CHANGES need to be made,* and the case would STILL be small, but it would be more versatile. *1.* Should have just made it "slightly" LONGER so we can fit 140mm Fans on the side, little more space for graphics card and Front Radiator, as well as 3 140mm Fans for the Bottom and Top. *2.* Should have made it just a "little" TALLER so we can fit radiator at the Bottom or Top with an ATX MB. *3.* Should have made the Hard Drive Bay "removable", and also made more areas in which we can mount drives and/or Controllers.

[@abnormallynormal8823]

I love how all the water cooling bros are hating in this case because it’s hard to fit rads, and all the air cooling bros are fawning over this because it’s this small and can fit a D15 or an Ice Giant

[@dimitriid]

No offense to all other reviewers out there but whenever I see there's an embargo lifted I immediately check your channel for your awesome b-roll footage. As for this case it's interesting that this is now a regular ATX case except you trade height for width. The perfect one for me would be this vents but with sfx space instead since I like the case being a tad thinner but I still like the aesthetics and functionality of this new version quite a bit

[@Beatlabdj]

Forget the build! You sir! Have great taste in music :D The track playing in the cinematic mode is killer! Great job!

[@GearSeekers]

That's because I make all the music

[@FreeZatE]

No 360mm rad-support is a big step down. That case would be my dream with 360mm at top and bottom, 240s in the front and side.

[@atheart_]

A mesh side panel option would be great! The way RGB illuminates inside mesh cases is so cool in my opinion.

[@Kaos-fn9pl]

Another draw back is that you cannot access the motherboard backplate.... meaning it is not possible for swapping cooler unless you tear your build apart...

[@Michael-js6co]

Nice video, thank you. Agree with you - if they had made it 20mm longer it would be possible to easily mount a 360 on top, a 280 on side and also a bigger GPU in. Why they are struggling always on such small things…

[@jamesbarlett246]

My favorite part of this case is the dust filter at the bottom. Weird I know but I wish more manufacturers would do it like that. My P600s you have to get up and walk around to the back of the pc and slide the filter out of bottom in the back to clean it for the psu.

[@sch-corp]

I don't mind the design decision to make the case shorter, it is meant to be "mini" after all. I hope Lian Li makes a v2 of their regular O11 Mini based off this chassis! Having to use a SFX PSU is what put me off the original O11 Mini...

[@danmarm5357]

Quick question from a noob, why so much hate on SFX PSUs? Like they only are smaller than ATX, is there something that I'm missing? If you go for the case you just buy an sfx

[@toxicturkeyy]

@@danmarm5357 eh, cost more, usually louder, only available in lower wattages, and people don't want to buy a new power supply.

[@danmarm5357]

@@toxicturkeyy Thank you for your answer!

[@sheilaalsy]

@@danmarm5357 sigh this is me looking up this video because I didn’t realise the incompatibility with my atx and mini

[@gingi_swagg9304]

Can’t wait to see you do an Air-Cooled set up in this case. Seeing some reviews where people aren’t using all the fans and I would love to see what the difference is between the side being intake and exhaust when air-cooled. Keep up the amazing content man!!

[@redrangerJ]

Just skip the rear exhaust fan to mount a 360mm rad on top. Wouldn't it fit that way? Lots of people already do that with the O11 Mini. It's really a case meant for 5/3 slot configuration with MATX/ITX Motherboards. Or...could the offset kit fit the original O11 Mini? Even better then.

[@marissagonzalez5093]

This is what I'm thinking too and I'm really tempted to try

[@Blue_Monkey]

3x 120mm fans barely fit already (see video) - most likely the longer radiator doesn't, because of the ports and (subsequently) tubes

[@th0r904]

This guy is spot on I’m building one now and if they would have made it 2cm longer the universe would open up because finally a case maker would have the grail of cases. Li an Li has always been my favorite. Love there cases. But we all want 140’s everywhere they are quieter. Don’t get me wrong it’s the best except for all the rest. Also the front panel was redesigned to make it more flow. He probably doesn’t have the redesigned one if it’s 2 months old video. They just rereleased the case with better front holes.

[@GoodGuyMatty]

Wish we could have these new features with the classic glass look

[@TechBasic111]

I almost almost click the buy button immediately untill I figure out that it doesn't support 360 rad on top, the front 280 is perfectly fine... But damn.. the case itself has so much potential to be the BEST case ever made and yet LianLi disappointed us again. Btw, great & fun review as always.

[@unknowntechio]

The only thing I wanted them to do the ONLY thing was to support a 360mm Rad with ATX support. That's what I was waiting on. The length change also makes that impossible. So dissappointed. All they had to do is support the radiator offset forward..that's it. Having said that this is the exact build I was planning. Gigabyte x570 Aero, Vision RTX 3080Ti..etc.

[@jphyun5469]

You can still put a 360 Rad on top but you have to mod the radiator all the way to the glass panel and using the zipties

[@unknowntechio]

@@jphyun5469 I know..I wanted a turnkey solution..not zipties. Let's be real here..this wasn't a hard thing for them to fix.

[@cupcakeobsession]

Looks like a better and bigger NR200. love the the size, any case bigger than this would be a no go imo. NR200 can get difficult with cable managements. This looks sick. I can imagine a clean all white build with while/blue rgb, a white desk, a white keeb, and white mouse, maybe called... spectre/ghost. Definitely sick case!

[@Cpmnk]

Yeah but this isnt sff

[@cupcakeobsession]

@Cpmnk it isnt but just give me that vibe, the other lian li was more of a showcase case with temp glass and more of aio/custom cooling in mind imo, this is like a brother of the nr200 but better in my opinion. 🥳📈

[@Cpmnk]

@@cupcakeobsession again, cant be a "brother" because its nothing like the nr200. Different size and use cases. It makes no sense to compare them. The 011 is huge

[@cupcakeobsession]

@@Cpmnk true but not as huge as the 400d. I meant as feeling wise, not really bother brother

[@jasonyang2288]

Just bought the mini Yesterday，omw to return it.

[@jSNR6S]

Love the in depth analysis about EVERYTHING! Covers all the small questions in the back of my mind about the product. Thank you for the hard work!

[@gamignman267]

This case would be perfect if they made the hard drive cage removable (such a weird step down from the original...) and make it literally 20mm longer. If they made it just a little longer it could fit 140s on the side, but more importantly it would fit 360 radiator on top, and 360 fans on bottom

[@stefanospap6288]

I don't care about AIO coolers, overkill fan configurations that only make the system noisier etc... 3 fan slots are enough. All I want is compact size, ATX mobo support, full size PSU, mesh front and good looks. This is the perfect case.

[@KevinM0890]

true. thats thee case ive been waiting for

[@StalewindFarto]

i think this a micro ATX case with optional ATX support, but not intended to be ATX foremost. Micro boards allow top mounted 280mm AIOs, just not enough for a PP config. Because the front mesh barely allows good views of any RGB fans, I decided to leave them in place while adding twin 140 SLs top and bottom. A nicer AIO would have saved me the cost of the top two SLs, but the EVGA fans aren't worth using. Top AIO (w/mATX) frees up yards of room for any card, but I suppose that's a pretty limited TOP SPEC, but worth considering since CPU heat will never be an issue while trying to expel video card heat from the case. That's the idea anyway, cheers and great stuff man, I love your channel!

[@kenh86]

If it has an all mesh option, I'm sold on that.

[@averagedad5844]

Knew you would get this case been waiting for this I love this case and seeing this build solidifying my decision

[@andrewc20]

such a shame it couldn't fit a 360 aio or fans on top, that's a deal breaker for me, such a shame, thank you for the great video as always, bee's D made me ROFL !! edit : came back here to write this ! the transition between glass on and glass off in cinematic mode was very nice !!

[@AlexaRex]

Yeah, the ATX PSU being supported is why I will get this. I don't get the 2cm shorter part. Several case manufacturers has this problem. They make a small case that is just a tiny bit too small to what it could have fit an been so much more versatile. I get that you have to limit it at some point, but come on. Design the case, check fitment for regular things see how much is missing to make them fit, then change it if it's just a tiny bit different. Please!

[@iceyynova1841]

I wish they would make a new version of the original with these new features and call it the Lian Li O-11 Mini II.

[@loufrancotajanlangit8257]

Im back. Busy with works. Glad to see this video.

[@erikdude95]

Not being able to mount 3x120 in bottom and 360 rad in the top totaly kills the case for me. The empty space in the bottom and top looks so sad. 2 damn centimeters. As GS said, 2 extra cm wouldn't make the case feel any larger.

[@honggoo]

I love youtuber dare to give their honest judgement when reviewing product. Good work and keep it in this way.

[@eric.ko.]

If I was going to build a new system today, I would simply build in o11-Dynamic Evo with front mesh. The size difference is so minimal for the extra breathing room.

[@aftermax01]

Lian Li Ceo: let's fix the mini! Everyone: Yesss! Lian Li Ceo: but let's make a new big flaw Everyone: dude, what?

[@KOT-ANGRY]

Please, answer to me... I bought Seasonic PX-1600 and its 21cm long PSU! O11 Air Mini specs said it supoorts 20cm PSUs... My question is will my 21cm PSU fit in this case? I dont need HDD upper bracket!

[@XCPTNL]

@Gear Seekers What are these cables with the running lights? And also: why wouldn't you put in a longer PSU, seems like there's plenty of space...

[@SmittyAZ]

Excellent review - Thanks. I was disappointed that this case is not yet available for the normies. I just finished an obnoxious light show 011 mini white build and was ready to upgrade since I do air cooled builds. I'm glad that you actually did a comparison review. Other reviews I saw didn't do a comparo. I'm not so sure now.

[@encaged314]

I was upset that the original mini didn't have mesh and couldn't fit an ATX PSU. I can't wait to pick up one of these to build in.

[@Cruor34]

Im glad I found this. I have a 4090, and wit5h that said, cases are too damn big. Who the hell needs all that room? Who has 4 old SATA SSDs they want in there? I cant be the only one who only needs it to hold a 4090, MB, CPU, and like 2 M.2's on the board with 1 water cooler.

[@camotech1314]

Made it shorter so it's more suitable for air cooling rather than huge radiator support. Nothing wrong with that imo, for people most air is enough.

[@VijitChandna]

i love how this looks

[@weirdodude1173]

I like this case a lot. There's so much airflow and the PSU is not in the way! Thumbs up.

[@xoffworld]

I agree with you nick, i like this case but i already hav a 360 rad and would love to mount it at the top.

[@andreaskuhn7619]

Looks nice... and I love all the improvements. but I still don't understand why they do not just place a "real" external 1x5.25" or 2x 5.25" Slot on the back. That would be much easier and you could buy any kind of "converter", HotSwapCage ect from 3rd parties like ICY/Raidsonic. And would even be able to put in a TapeDrive for Backups. Same with the front: Why not build in a 3.5" or 5.25" Slot or to? It would be so nice to place something like the IB-2260SSK-12G or even an IB-2280SSK on the Back or Front or al that other stuff you still get to mount in a 5.25" Slot. Imagine a Litte TFT as a staus Monitor right there in the Front - like the Lamptron HC060 or some extra USB, Cardreader Combo in the Front. or something like that New Evercool HD-AR-R ARMOR 2x 5.25" Drive Bay to 3x 3.5" There are still endless things you can get for a 5.25" or 3.5" Slot to Mount in - or you can to a lot DYI things very easy. I am using 2.5" HDD Cages for mounting my SATA SSDs even on the inside of my case from preventing them from breaking the connectors by pulling on a cable and make them easy swappable too. I also use a version that has an integrated RAID1 System. I even still use an old DVD Writer to backup some word/excel files and pictures an easy and cheap - and reliable way. Lian Li also used to have a ton of things that you can screw in 3.5 or 5.25". Like that BZ-502B or some Fan controllers So please Lian Li: Just make these rear Slots just 2x 5.25" "External" and Incloud some cheap mounting Adapters for 3.5" and 2.5". And put in at least a single external 5.25 Slot or a 3.5" slot in the front. And please: Give me the chance to get a mesh side panel instead of that stupid glass stuff. And have you ever thought about a "grey" version instead of black/white? Just like that cheap BeQuite Basic 500 Case that looks great in this color

[@benputhoff9898]

this is actually perfect. I tried running the Corsair Crystal 280X for a bit, and this is like that and the original o11 mini in steroids

[@myBacau]

Cant wait for a special Mirror finish PCMR edition like the original o11 got

[@jettsom]

I don’t know why people complain about the SFX PSU on the original mini. It is the best feature and I love my Corsair SF1000L with type 5 plugs. One of the best PSU out there.

[@GearSeekers]

Not when this case launched

[@BluesElwoo2]

Just got mine today! So far it seems freaking sweet! I can't build in it yet, as I don't have my new MOBO or DDR5 ram yet, but I have everything else! Im so excited! I had one problem with it. The power button was sticking. I was able to get it to stop doing that by taking off the cover on the I/O panel and gently rocking the switch back and forth a little bit and pressing it at different angles. Now it pops up every time. Must have had some plastic burrs that needed to be worn off. Other than that, it feels really high quality!

[@th0r904]

Omg don’t talk to me about DDR5. I’m thinking mid December.

[@BluesElwoo2]

@@th0r904 yeah man, since this post, I gave up on ddr5. It's too bad, but I finally almost have my pc built! Everything looks super cool in this case! I think I will have it running tonight!

[@evilblade5040]

that radiator - ram clearance is bang on man... i can't fit my 28mm rad + lian li uni fans.... think i need smaller ram...

[@Shrek765]

Lian Li has my attention and I get what you had said on both accounts!

[@Phalaxis83]

Excellent build video fams. Neat looking case, great price for what you're getting. Keep up the great work :)

[@cesarsstuff5099]

Thank you for uploading. I was looking to buy a small atx case looking into the corsair 220t but I wasn't sold 100 percent. So glad I slept on buying it to see this video also didn't want to buy an sfx power supply since already have a atx one.

[@RusyaidiDzulkifli]

Can someone start a petition or something to get Lian li to make this case slightly longer to accommodate 360mm AIO? It's so frustrating to see a perfect case for me but can't fit my AIO😩

[@Beerdwolf]

Seems like you can fit a 360 rad on top, ditch the rear fan, not needed. 280 in front, 240 in the side or bottom - seems really impressive

[@GearSeekers]

It won't fit. 3x120s barely fit.

[@Zombie101]

you cant remove the HDD cage, which makes cable management very hard, the holes for air flow are too small. if they made this 2cm longer and had an option to remove drive cage/ larger air holes this would be king

[@siomaiethan]

This is perfect. I was looking for a corsair 280x, which is unfortunately unavailable in my country. This is much better

[@th0r904]

I had a Corsair 280x for my build but my graphics card would have been too close. So I moved to this in 5 slot for MATX.

[@michaelw2263]

I actually really like this case with the mesh set up and might push me to change out my mini-ITX build for this!

[@jomesguerra]

Nick you are a mastermind, that’s almost the build i was going to go for! Aero 570s is too clean!

[@gdeeable]

I went to the Snow Mini case and the AERO 570 because I saw his build and overview. Go Nick,, K.aire & Bindie!

[@nghuyquocc]

I’ll build exactly the same but I’ve heard ppl said the Third RAM slot RGB doesn’t work no matter what.

[@jomesguerra]

@@nghuyquocc the aero?

[@nghuyquocc]

@@jomesguerra yep I've read some comments on newegg ppl said that happened to them

[@alrizo1115]

I think the o11 air mini is mainly for air coolers if you want to build full atx motherboard. It can still do 280mm aio on top with matx motherboard so still good if you have a long gpu.

[@emp1985]

dang it, they went the other direction for me. The O11 Mini needed to be thinner, not fatter (not fatshaming here).

[@sunraiii]

Totally agree

[@kevinw7319]

Thinner? Then you lose the dual chamber design which is what this case is all about!

[@BrazenFond]

understand the 2cm shorter is a problem for some but this case is gonna work for my setup perfectly want the size but dont wanna have to get sfx power . another great review! thanks

[@IqbalSaiful]

Thank you for the insights great & useful comments 👍🏼 🙏🏼

[@jteds711]

Intro beat is so tough

[@archillusion]

Good content as usual. Glad to see the aero x570s used, was wondering how that would look like and run

[@jwaye89]

Awesome video fams, awesome coverage of the case

[@Kizzster]

Why on earth would they make the case shorter... Lian Li please revise your case. Love the ATX PSU support but to get rid of the 360mm AIO support makes ZERO sense. This case could of been awesome but Meshlicious or NR200P Max it would be for me!

[@dustingomez7590]

I think you can move the rear panel down so you can fit an AIO

[@gdeeable]

But, you’re locked into using an ITX or MATX board. 🤔

[@dustingomez7590]

Yes, because it’s the 011 mini. If you want it all get the dynamic

[@GearSeekers]

It won't fit. 3x120s barely fit. AIOs have end tanks that make them longer

[@dex5151]

I want this case with a class front panel, looks so clean

[@Tava]

built in this case about a year ago (10900k and 3090 build) and i found the thermals are pretty sick too even with a 240 mil aio (probably due to 8 fans lol)

[@Brenrys]

What do you mean by sick? In a good or bad way?

[@Mart7y]

Glad I watched this before getting mine. Was going to swap my o11 dynamic into one bc of the power supply being able to fit a atx psu but the fact I’d have to buy new fans and a new rad (just got my 360mm aio a couple months ago). I’ll wait for the mini evo or the mini 2. Love the mesh front though.

[@bichstewie]

Nice video! I can't figure out the best fan setup in terms of intake/exhaust. Is your radiator here doing exhaust? which fans are intakes? If anyone in the comments can advise too that'd be great, thanks!!

[@VonFenal]

I have a lian li 011 mini and i have a atx with a 360 rad and 3 fans mounted on top, only had to made two little brackets and push it to the side of the case. just have to make sure your ram isn't to tall.

[@milktea5348]

The case looks really nice, but I wish they kept the same look as the original mini

[@markdavenportjr5129]

I am totally gonna upgrade to this case later this year from a crappy ibuypower pre built case and my mobo is a matx b560 board so ya this case is just perfect for it. :)

[@何凌虚]

Hello GS. Does this case support front 240mm radiator, with 280mm radiator on top and 2 140mm fans at the bottom? I saw from the Lian Li site there's no room for front radiator if both top and bottom 280mm radiators are installed, and 40mm thickness max for the front if both top and bottom 240mm radiators are installed. Not sure how's the clearance situation for my case.

[@Swindy]

Hey Nick, I'm really considering getting this case but I've currently got a 280MM AIO for my CPU and my GPU has a 120MM AIO on it. Do you think I can fit them both at the top/rear? It looks to me like they'll fit if I go tubes down on the GPU AIO on the back, but I can't tell 100% for sure. If I can, I reckon I'm sold on this case. The ATX PSU support is a big win for me too!

[@slinkywizard]

What sized motherboard? That would be key to fitting the GPU 120 AIO on the rear. Otherwise perhaps you could mount the GPU 120 AIO on the top side position? Would be an interesting build

[@Swindy]

@@slinkywizard It's an ITX motherboard at the moment but I'm looking to possibly upgrade to the Gigabyte X570S Aero G to get 4 M.2 SSD's cause of the Direct Storage stuff coming out soon. In my current case, I can only fit my 120 AIO in with a slim fan because the pump housing actually interferes with a 25mm 120 fan. Watching some other angles in other videos, I think it could fit with the slim fan so I think I'm going to pull the trigger when it's available in my country

[@shiranzac]

“Air” in the case name doesn’t imply its for air cooling only, it means the case is airflow optimized, you need airflow for both liquid and regular air coolers, so saying it’s not for liquid cooling is incorrect, the case differs from the regular o11 mini by giving more options for air flow, rather than being a fish tank, hence the name o11 Air mini. So it is valid to criticize the lack of options given in the case to mount radiators as it could have been easily done.

[@GutoGerbase]

Hey mate, did you hear anything about a revision/new version of this case? I'm about to build a new PC on Q1.23 and I would be really unlucky if they release a new version right after I buy this one 🤣 Amazing video as always; Thanks for your content!

[@GearSeekers]

Haven't heard anything from Lian Li for a while

[@GutoGerbase]

@@GearSeekers thx again mate

[@ProNinjaBoy88]

Great vid n insight! I love how u can use a regular PSU which is why i would love to have this case! my only question is that i have a 280 mm rad; would that fit on the front with 120 or 140 mm fans on the side or would there be no room?

[@th0r904]

280 will fit in front with radiator but your video card size will determine that. The 240 side slot is receded so has no problems hitting 280 front fans

[@Gamingtechgg]

This wont fit in my suitcase :D cant hit the dislike button when you do such beautiful build 8 ungrateful people. I look at you

[@654321yhtaeD]

it bothers me that you can see the mounting rails for the back 2 120mm fans. i like that d mini with 2 140 fills that space and looks cleaner. i think the d mini looks better with the 280mm back mouted rad with just 3x120mms up top. i still like it though.

[@Synophic]

I think people forget that this is an air variant... If you complain about options with radiators then you it's on you as you shouldn't be looking at this case.

[@geo41e]

Hey boss, very late here..but wondering... I just got a 3070ti founders...and wanting to vertical mount the card with this case...what are your thoughts based on the airflow of the case, relative to the cards unique fan style ? Would be great if you could do a test, as I have not really seen any tests with the 30 series founders vertical mounting !

[@ErgonomicChair]

If this case was 2CM longer, I wouldn't have bought it. I wanted the smallest ATX case with good features I could get... this is the perfect length tbh. Even shorter could have worked for me tbh.

[@mercesletifer9553]

i hope you can remake this video with side to side comparison for the previous case and the new one

[@cloveravalon444]

well, I think Lian-li reduced the length intentionally for the business matter. Because, if the 011 air mini can mount 360 aio, people will by the air mini for 360 aio and ATX psu rather than O11D mini.

[@atomsapple]

Do you think a 280mm AIO can fit up top? Lian-Li says no on an ATX build, however in eyeballing your build… why wouldn’t it fit?

[@GearSeekers]

It will hit the motherboard

[@MRDEEGAMING]

Love your reviews just makes me want to build another pc

[@jeffmartin8377]

Great case with upgrades still cool

[@jkristia2011]

I just got my case, and I'm disappointed in the size of it. It doesn't look that chunky in your video, but man, in person I think it is an odd shape (way too wide). I really wish I had gone for something slightly taller and slimmer. I haven't started my build yet as I'm waiting for a LG1700 cooler bracket. Hopefully it will go smooth when I get to that

[@Daisudori]

So normal thickness 240 aios do fit now in top with ATX, thats nice! Since its still above the Ram, i wonder if 280's would fit. or a Liquid freezer 240 with the offset brackets...

[@sunraiii]

Good stuff on the build and damn that Phanteks AIO is sleek af

[@Boria0]

I agree about them making it unnecessarily shorter. Now can't put 280 rad on the side. If want to keep nice, unrestricted chimney airflow bottom to top for the gpu. Only 280 AIO mounting point is the front. Which in turn means not every gpu will fit. I wish there was a longer version of this case for 3x 140 at the top and bottom as well as 2x140 Side. Either air or glass front. I'm not too bothered

[@th0r904]

You can mount 280 AIO at top it just has to be in 5 slot mode.

[@Boria0]

@@th0r904 I'd rather have nice airflow from bottom to the top without a rad blocking it. That side mount is a perfect spot for a rad. No idea why they've changed it to 240 from 280