Gearz on the Road & What Specialty Tools Do You Need? - Stacey David's Gearz S10 E4

The Gearz crew mount up and head out to visit a young gearhead whose love of wrenching started with 4-wheelers and has grown to include 4-wheel drive pickups. Young Adam has a few surprises in store as Stacey visits him in his dad’s garage and discusses tools, storage and tearing apart things to see how they work. Then, it’s back in the shop as Stacey takes on the big question every gearhead has: What OTHER tools should I have in my box? A look beyond the typical wrenches, hammers and clamps will show you what you may need and what you may not, depending on your project. Finally, Stacey shows you some tricks on how to bring a tired paint job back to life with the right buffing pads and compounds…..all this and more only on GEARZ!!

[@krzi-o5619]

Always loved this show . Started watching when it first came on . Every Saturday morning , after cartoons of course lol , I would watch Power Block . Stacey David is one of the most talented and genuine people I have ever seen . Great video .

[@CharlieRasch]

I love how Stacy is going out and helping people like this young man. Thanks Stacy for helping out where you can.

[@azadkamil6193]

Full episodes are the best I wish we had more of them

[@alaskanken2132]

My first new from the dealer pick up was a 2000 z71 off road short bed. Man I loved driving that rig. Every place I went was fast and sideways until the tickets came and helped me grow up 😁

[@dougmiller951]

Really dig the full episodes

[@mirycreek]

Nice, nice, nice, been a fan since Christ was a cowboy,can't say how happy I am to see you still making episodes, was hotter than a 2 dollar pistol when they quit airing GEARZ in Alberta glad to see your still at it Mr David, all the best

[@Vincent-ke5zn]

This kid will go far in life with his dreams and drive. I like trucks to ride level, I don't want any vehicle to be higher in front than the back

[@JustAGearHead]

Don’t like that stance, Truck looks like it’s dragging ass.

[@tomcooper920]

I like your shows and have ever since you started back in the 90's. I only wish there were new ones more often and not as many reruns. Are we going to be able to see the wrecker completed?

[@mykecollins3255]

Tom Cooper I totally agree with you..love the show ,but am sick of ALL the reruns.

[@JaMarvelousjmar]

Gears on the road is a good idea.

[@Vincent-ke5zn]

Great project vehicle, good luck and drive safely

[@ToddHLHG]

Always enjoy your show Stacey!

[@mreed353]

My truck is really similar! It’s a 2001 2500hd single cab long bed with a vortex 8100 and a six speed standard! I love her!

[@vertonmccaulou5]

Matthew Reed I myself love driving a standard great to see others do also

[@brettkoeshall2325]

I really love doing projects on different cars.

[@theguyokcolorado6367]

Coolest videos ever because I'm that everyday Joe that works a lot and play's when I can.

[@JMcCannATC]

Shout out to jesse ryan and KAA, nice to see the sticker in the wild

[@mitchf1508]

Give the kid a break.. It's HIS truck and he's doing it the way HE wants it.. Not the way YOU want it.. Do what you want to YOUR truck, that's the whole point of Stacy doing what he's doing and I think it's great.

[@hammerdragon4321]

Those tools are very nice I buy both snapon and cornwell tools those cornwell tools that they got with the little tool cart cost a total of $6500

[@heres2ya]

Why the drop/squatted rear end?... really ?

[@jeepish4938]

Butch It's absolutely horrendous. No truck should have a squat.

[@heres2ya]

Jeepish49 I know, it's like it's broken, or something. Must be a Cali thing.. freaking mall crawler's!

[@jeepish4938]

Butch It's actually called a "Carolina squat". It's from the Carolinas. but yes, mall crawlers.

[@genejackson4261]

So you can tell from the parking lot which guy takes it in the ass

[@jeepish4938]

art vandelay Lol it's funny because it's true.

[@kennethsmith8968]

Stacey is such a cool guy

[@concepcionberistain81]

What do think of doing a 1970 cadillac coupe deville project

[@delvinchandler]

That crossfire is dope, just picked me up a dodge magnum with the 3.5 v6 I'm a sound man love bass and sound quality at the same time don't know where to start though

[@willburking1708]

Dude . Back in the late 70's . There was a company called "tuff truck" . The had a kit , where you could put a tag axle on one ton trucks . Can you help me dig any info , on that company ? Thank you Willbur King

[@Roadglide911]

Is this show still in production?

[@MakingBoost]

More full episodes!

[@clarenceswope3026]

I would have to say the best tool any Gear Head should be a Chelten or one of those mechanic Bibles because how can you fix something even if you have all the proper tools if you don't have the manual just say how to do something enjoy the program I wish we had gears TV down here in Arizona

[@manfacilitymetalworks1296]

Get yourself over here to the UK... Plenty of projects over here to tackle

[@michelantoniomorin2201]

AWESOME

[@ccmyart]

It's too bad about the direction the Eagle Scouts are heading. They were a fine organization.

[@moctezumaRevenge]

Poor kid he couldn't finish lifting the rest of the truck lol. I dont care for cali lean trucks. I wonder how much squat there is if he tows or can he even tow with it.

[@robertmercer5759]

Need upload full sgt rock episodes

[@isuguy82]

18:49 You should really take the tags off the microfibers when removing the product.

[@dano4572]

the kidz chevy is beautiful"! but lose the California drop look! level the truck UP!

[@Christopher-et7bc]

dano that isn't California style. People don't really do that here. They level the trucks here

[@dano4572]

thankyou! the power of youtube. got it! California born and bred. in fact, in 1975 I did the first lift kit!! did 4 trucks with my kit. note: only for 2 wheel drive independent suspensions. if I had the moneys then I'd in the money now. just sayin

[@swampcritterisbackbaby1740]

It needs to have a big foam turd hanging from the rear bumper.

[@tiredrummertube]

I hope the young gearheads learn to lower their head lights when they have the front end up... if not, low beams turn into blinding high beams... and the low beams don't cover the road as well either.. c'mon man!!!

[@ericmcginnis9413]

The crossfire needs a hemi!

[@MDC2020]

Why the hell have the back of your truck lower than the front? kinda defeats the purpose of a truck doesn't it.

[@dijopd9e]

Yes hell 👆🏼☝🏼

[@hambone03]

I wish he would come help me

[@Ford679]

Hay man love the show my name is brandon i have been a fan sens i was a kid im 35 and been disabled all my life in other words my legs dont work right butt i still work on stuff i have a 1979 f 150 supercab long bed 2wd that i love she need some love but being disabled and living on ssi i don't have a lot of money to do the truck like i wont i just wont it like it was new stock my be make it 4 welldrive that's all id love to meet you some day and see some of your rides in the shop up close n e help wood be appreciated have a allsome day

[@foewilla7790]

Brandon Caison hell yea brother! Man me and you in the same boat. My names bryn. I been in a wheelchair all my life from a car wreck but it don't stop me. But yea I love cars and anything with a motor. I got so many ideas for bad ass show winning builds but no shop no tools and no money to do it with. I got a good bit of know how but just need to find sponsors.

[@jrg7951]

Trucks are much more practical to restore vs a car

[@stevemanxxx]

Obviously he will never tow anything with that truck. Headlights are aimed at the sky as is. Absolutely no thought into the handling aspect of having a 6 inch front lift and stock rear suspension. Yikes!

[@zacharywhite8230]

Should get rid of the HID bulbs in the stock housings. Not only is it illegal in most states it’s a prick move to blind everyone.

[@loranzobaker7293]

Wonder how much the kids dad had to pay for that

[@robertmercer5759]

Shagging rear looks dumb

[@2011Fatman13]

Stacey,have loved your stuff for years,but must say was thoroughly disappointed in the paint tutorial.Just claybarring would have fixed most of the stuff you fixed buffing without the risk of burning up the paint.Using buffers,pads,and compounds are a distinct skill set that requires a good deal of practice.Go to Ammo NYC for good tutorials on this.

[@gambj]

2011Fatman13 As an Ammo Nyc sub you should know better my friend... clay is absolutely never the answer for removing any sort of paint imperfection like swirls or scratches, only to remove the surface contamination like tar or fallout. Clay even mars the paint on a small scale, the opposite effect of polishing. Perhaps refer to an Ammo Nyc video on clay for more information ;)

[@mirycreek]

Joey Gamblin ya we have to stop watching gears and watch lumpy's web cast and paint tutorial, I've been watching Mr David's shows for almost 20 years he knows his shit, can't believe these keyboard commandos

[@fidelserrano466]

Clay bar would not fix what but he might have been able to use dual action instead of rotary for unexperienced viewers to be safe

[@vladk568]

The back of the truck ruins the whole truck

[@BrandonSchumacher9519]

Has that Cali lean to it and them big old tow mirrors. Ugly as hell. Level it out and take those fucking tow mirrors off.

[@thecman26]

That truck is all kinds of fugly! Ass draggin, tires way outside of the fender flares, and it's basically all Florida Georgia Line bs...

[@KendallForshee]

The tires outside are the only exception

[@KendallForshee]

And Chevy's front end track width is a bit wider than the rear end.

[@Beux3751]

Rear sag looks stupid

[@lookeywho1287]

Worst wig I've ever seen.