Geberit Type 360 Fill Valve

[@nikolaykhokhlachev6845]

Спасибо! А то нигде не найти как отрегулировать уровень воды ))) ребята Спасибо вам большое!!!

[@putrapertama9065]

Thanks You,,, Brothers🥰

[@geocarey]

What is the function of the clear plastic tube fitted at 1:22? The one I am replacing does not have such a tube.

[@badimaani]

Thank you guys... You saved me half a day of DIY. I love you 😘😘

[@SALATILLAIL]

Thanks, it help me a lot 🌹

[@ACTAXOB]

Why didn't you show me the results? It's important for me to see how the equipment works and a transparent tank is perfect for that. The marketers are no good...

[@vianrozakurniawan8709]

What is the specific function of plastic tube to fill valve in minute 1:22 ?

[@GeberitGroup]

It is a refill tube. This is needed to refill the siphon of a siphonic toilet with water.

[@vianrozakurniawan8709]

@@GeberitGroupbut, I check my toilet plastic tube not siphon a water. It's not function (blocked). How about if I drill it? Because I will installed toilet sanitizer

[@GeberitGroup]

I wouldn't drill it. Get in touch with a local installer. I am sure they can fix it.

[@vianrozakurniawan8709]

@@GeberitGroup but, the installer suggest me to drill it because the urinal sanitizer worked based on water pressure in toilet bowl (drill in flushing line). If I drill it, what does the refill tube pipe probably happened?

[@GeberitGroup]

We are assuming that you have the wrong article. The valve is available with and without refill tube.

[@ДмитрийСергеевич-ж9я]

Why are there sticks in the drain mechanism?

[@GeberitGroup]

What do you mean? Some sticks are for moving the valve open.

[@wayfaring-stranger]

When will you release a video about geberit type 340?

[@GeberitGroup]

Currently it's not planned.

[@sevenproxies4255]

Having an issue with the fill valve. It keeps filling up the cistern, even though the flotation kicks in and moves the lever up on the fill valve. It's like the diaphragm simply doesn't stop the filling process. I've taken the fill valve apart and cleaned all the components but it didn't help. I also tried lowering the fill valve to get a lower water level in the cistern but it didn't help either. The diaphragm looked intact. Can it get worn without showing obvious signs of wear and tear? It would really help if there was a video showing the principle of how the diaphragm and the lever works.

[@GeberitGroup]

Hope this helps: kzbin.info/www/bejne/pJXIeHd8i82opsU

[@rickeymyers278]

Having an issue with the fill valve hissing and spraying water all over the tank. Also takes forever to fill up. Should the fill valve just be replaced? Or what could I do to trouble shoot. I have cleaned everything out and made sure everything was seated properly. It worked for about a week or 2 and we are back to the same issue. Any idea?

[@scotty1343]

Change washer in the valve pal

[@sheikhsufyan]

Wanted to see the clear tank in action

[@mirzafetic6215]

We just bought a toilet with your valves and the fill valve is leaking. To be more specific, the bubbles are coming from the rubber that is meant to ensure the tank is tight. And it happens only while the tank is being filled.

[@GeberitGroup]

Could you please check if the flush valve basket is fitted correctly? Perhaps something blocks it and the seal is not tight enough.

[@thomaslewisa6039]

Where can I get it

[@jamesdalton9911]

Should of flushed out line via cistern stop valve before reconnecting hose. Fail.

[@GeberitGroup]

You are right, James, you need to rinse the hose before connecting it to avoid blockages. In a renovation situation like this, we skipped this process.

[@briancronshaw9965]

That tells me nothing