General Aptitude Detailed Solution | CSIR NET June 2021 | Answer Key | Explanation

[@AllBoutChemistry]

Note 1: I did mistake in angle question at 09:45 The angle made in the triangle which I extended should be 50, 50 and 80 instead of 50, 50 and 100. This will make the angles for the triangle containing x to be 100, 50 and x. Thus it would make x= 30• So basically the answer is correct in the video, while explanation I did wrong. Note 2: In question at 06:23 the answer should be 2. I did mistake by telling it'll be 4.

[@chemclassesbyruchi6217]

One question is....we have three equations y=x, y=1-x, x=0, then we have to tell which type of triangle will be formed by using these equations.

[@AllBoutChemistry]

@@chemclassesbyruchi6217 the answer will be isosceles and right angled

[@amreshkumar-db4li]

Sir also about maximum volume question... Answer should be 2

[@AllBoutChemistry]

@@amreshkumar-db4li yes you are right... Answer should be 2

[@jmzz43]

For UGCCSIR questions is asking about to rotate after 1 rotation

[@VishalRKadam]

19:30 Q8). What day is today? Ans: The day of Exam is Wednesday. CSIR just confused everyone. It was just simple😅

[@souvikroy8517]

There was a big problem in server issues at many parts of west bengal and other states. We couldn't give exam because all grp C questions and some grp B questions were not loading.sir what can I do right now!!??

[@tannukaushik9]

Yes, I saw some questions in the videos which were not there in exam, I don't know how did it happen..

[@snishakv6598]

Answer key of questions from chemistry ? ... plz upload🙏

[@tannukaushik9]

Sir, I didn't see some of part-B or Part-C ques in my paper which are being discussed by some channels like VO4(3-) etc wavelength ques, quantum's commutator ques & there were some other ques also I think What should be done in this case?

[@tannukaushik9]

Sir, kindly suggest should we mail CSIR in this regard?

[@tannukaushik9]

@All Bout Chemistry

[@neharohilla4901]

Sir pls ye suggest kro hme apptitude ki right way me preparation kha se krni chaiye plsss sir

[@mamidaladivya2028]

Tq sir Sir will you give information about upsc geoscintist exam it is conducting on 20 nth only day after tomorrow

[@santanus5316]

Please you suggest a book or something which will be something enough for preparing aptitude part for gate or net

[@shalinisiddhula1303]

Hello sir almost all the questions from previous year is every year same repeats sir....

[@hareshraygor2194]

Sir in que 3 the equation was simplified that x^2-8x+12=0 And ans was 6 and 2 ,the right answer was 2.

[@Lee-xy9mf]

Sir, I present at exam center lately, Unfortunately biometric is closed, is there any chance for Rescheduling my examination?

[@oneandonlyfoodies673]

Sir square vale question ka answer answer key me 2 dia hai

[@surajitsahoo5933]

Exam ke time computer bar bar hang ho raha tha, ek sath 4 yea 5 questions skip ho raha tha, aisa kisike sath hua tha kaya?? I am from west Bengal In kolkata maximum students face the problems, in different centre. I know this is a technical problem but sabke sath hua yea hamare sath???? Plzzz response anyone 🙏🙏🙏

[@anjupal3828]

Mere sath bhi aisa hi hua, kuch question youTube pr pta chle ki ye bhi the exam m😞

[@surajitsahoo5933]

@@anjupal3828 I think we should mail csir regarding this otherwise this will happen again in the next exam

[@piyaapaul2520]

Sir I'm from West Bengal , sir there was a big internet issue and that's why I couldn't see some of very easy question from part B and also 1-2 question from part c.😔

[@vipulsingh5478]

Sir apptitude kha se kre please

[@manyapal6139]

Sir general aptitude ko kaise cover kare jaise 7 to 8 ques kr paaye exam me. Please help sir .

[@harshinimohan2684]

Good evening sir.Sir can you plz tell how to find hybridization of FXeN(SO2)2 and FXeO(0S02F) plz sir

[@vijay8269]

I have 10 correct out of 11 in general aptitude 🙏.One questions tha ki jisme N coin the and use N side square vale surface par rakhne ka combination btana tha and one row contain one coin

[@shivanigupta3824]

What did you choose for coin question

[@jy12amu]

Please share the reply. I am getting factorial n.

[@narendergarg2876]

previous year question

[@simrandumra2101]

Sir in square question volume are coming 100,128, 108 ,64 respectively with cutting side of 1,2,3,4 cm thus square of 2cm cutting give maximum volume

[@AllBoutChemistry]

Yes I corrected that in PINNED comment. The answer should be 2

[@Honey78611]

It was asked for weight proportion of copper alloy only

[@pawanjandu4285]

Next csir kb hoga

[@sabithasangem1134]

Yes only copper.... We don't have the option 1/23 .... We have.. 1/12 , 1/24...

[@sujjuuraoyadav]

Sir 180-130=50 correct answer hoga na ?

[@AllBoutChemistry]

Note: I did mistake in angle question at 09:45 The angle made in the triangle which I extended should be 50, 50 and 80 instead of 50, 50 and 100. This will make the angles for the triangle containing x to be 100, 50 and x. Thus it would make x= 30• So basically the answer is correct in the video, while explanation I did wrong.

[@jotishdas]

Sir angle will be 180-130 = 50°

[@AllBoutChemistry]

Note: I did mistake in angle question at 09:45 The angle made in the triangle which I extended should be 50, 50 and 80 instead of 50, 50 and 100. This will make the angles for the triangle containing x to be 100, 50 and x. Thus it would make x= 30• So basically the answer is correct in the video, while explanation I did wrong.

[@AK-mo5nc]

34:00 question was Ratio of copper alloy only Answer was 1:24

[@amreshkumar-db4li]

@@AK-mo5nc I also think the same

[@karthikkd3471]

Thanks a lot sir

[@adinathchore768]

Angle must be 50

[@organiclovers6432]

Sir I think if they lied yesterday today is sunday

[@amreshkumar-db4li]

No answer should be Thursday only

[@amreshkumar-db4li]

@ridhu i think data inadequate

[@manivannanm3819]

180-130 = 50 not 30 once check it bro

[@AllBoutChemistry]

Plz refer to the pinned comment. I have explained it

[@utkarshsaini8742]

25marks in part A

[@jotishdas]

Thank you sir

[@bichumonlotha3130]

22:30.. This question got me.. Lol

[@zeefat83]

May m fir see csir Ka form niklwa do

[@sivalakshmipola8971]

Thank you sir

[@Artistkajalpatil]

Thank u sir

[@sainisumitra6986]

Thank u sir