in video (2:47:56)at that time you used input as piw256 piw260 piw264 piw268 why you didnt use them as 256,258,260,262 ? because of the pt100 is 4 wire?
@generaltechnologyknowledge51653 жыл бұрын
yes when use with Pt-100 directly the address will jump to piw256 piw260 piw264 piw268 Thanks
@sinanartemis61763 жыл бұрын
@@generaltechnologyknowledge5165 thanks sir
@generaltechnologyknowledge51653 жыл бұрын
@@sinanartemis6176 You are welcome!
@ethioptechzone27383 жыл бұрын
Thanks a lot!
@generaltechnologyknowledge51653 жыл бұрын
My pleasure!
@spanicure72793 жыл бұрын
if i need help some project for label machine or filling machine, would you help me to start the program
@generaltechnologyknowledge51653 жыл бұрын
@@spanicure7279 Dear sir, Sorry because now I have many jobs to do with other requested so I have no time but I can support idea for you. Thanks you sir!
@sinanartemis61763 жыл бұрын
and also ı concern about if ı write for example some blocks and if ı download that my system in factory will stop or will continue to work because ı will make that change when factory works
@sinanartemis61763 жыл бұрын
Hello sir may I ask a question about pid, When we use a pv as pv_per , how it knows range ? I mean for example I gave a set point 50.0 and I give a piw288 input and that value for instance piw value is 15000 . At that condition we didn't give a range to pid input how it's compare value with set value
@generaltechnologyknowledge51653 жыл бұрын
Dear sir, There are two options that we can use it, for PV_PER it mean that PROCESS VARIABLE PERIPHERAL The process variable in the I/O format is connected to the controller and data type is WORD. But for PV_IN the data type is real. Thanks you.
@sinanartemis61763 жыл бұрын
@@generaltechnologyknowledge5165 I mean for example I have a transmitter and it send 13000 value but how that block compare that with my set value for example my set value can be 100 or 200 or 50 ,
@generaltechnologyknowledge51653 жыл бұрын
@@sinanartemis6176 Dear sir, Thanks you so much for you questions, normally output of transmitter is analog right? It provided 0-20mA or 4-20mA or 0-10VDC... ect. Then you can convert from raw value to actual value it mean that convert from INT to real by using FC105 or another function then you can take the value of output from FC105 to PV_IN of PID block it will work. Thanks!
@sinanartemis61763 жыл бұрын
@@generaltechnologyknowledge5165 set point must be in percentage 0-100?
@generaltechnologyknowledge51653 жыл бұрын
@@sinanartemis6176 Yes so you can use memory MDxx for set point value to PID block. Thanks you
@sinanartemis61763 жыл бұрын
Hello sir, may I ask when we use pid block fb41 I want reverse action how can I set that. I mean in normaly when the pv is less then sv output becomes increase. I want a reverse action on output. How can I adjust that
@generaltechnologyknowledge51653 жыл бұрын
Dear sir, Thanks you so much, we can reverse it but basically you can write more about this formular as (100-Output(from PID))=Output(Analog) I hope it work. Example output from PLC =80% so 100-80=20% then you convert 20% to 4-20mA or 0-10V of analog output. Thanks
@sinanartemis61763 жыл бұрын
Thank you sir
@mohamedel-shamy19452 жыл бұрын
Isn't that wrong to use double words for one channel? I need a help on this issue because I know that each channel is represented by single word ,isn't that right ? Why are you using two words for each channel though ??