Seam Line That Dont Want To Go Away : Tutorial

[@cdfe3388]

I never would’ve thought of doing it that way. Thanks, Bob!

[@pawpawstew]

I can't tell you how many times I've chased seam gaps. This video is a light bulb moment for me, Bobby. Thanks for sharing this tip! 🤜👍🤙

[@genessismodels]

Glad it was helpful!

[@Model770]

Nice tutorial ❤

[@genessismodels]

Thank you! 😊

[@stevejesus6525]

My tip: before cementing the fuselage halves , sand a very fine bevel on the top edge of each half . Then after the glue sets you will have a nice micro recessed gap for your filler

[@genessismodels]

Great tip!

[@DavidMarzola]

Very nice presentation. Learned something new. Thank you

[@genessismodels]

Glad it was helpful!

[@dah9093]

Great vid. Wouldn’t be bored by a filler vid at all. In-fact, I’d love to know when and why to use the numerous fillers that I own. From Mr Hobby alone, I have Mr Putty, Mr Putty R, Mr Dissolved Putty, 1200, 1000 and 500!!!

[@JDK16]

As you mentioned, if it's a seam gap on the top of the spine or similar area, you have to be real careful not to sand away plastic as the CA is going to be harder. For those areas, I recommend sprue-goo, sprue plastic dissolved in Tamiya extra thin or similar. I actually use Tamiya Airbrush Cleaner.

[@cosmarendy8417]

Thanks for an informative video as usual. For a relative beginner, this is great.

[@tcandle695]

Good tip. I make my own filler mixing CA glue with baby powder or corn starch. Thanks for your videos.

[@raymondmoore8320]

Nice bit of info,thanks for the video.

[@genessismodels]

No problem 👍

[@deltic5514]

Home brew filler sprue and glue, like JDK16 says, sticks like xxxx to a blanket and as its the same plastic as the kit you don't run risk of shrinkage etc. And its cheap.

[@daniellabra4186]

Another suggestion for gaps such as these ones: Mix some CA with nail acrylic powder. It's an excellent filler, doesn't shrink and can be filled without problems. But, please, test it before with some scrap parts or model.

[@nicolaisen1]

CA doesn't shrink from reaction with solvents. Awesome filler on its own or mixed with dental resin powder.

[@davidcole333]

very helpful!

[@joseluiscastanorestrepo]

Great technique

[@jimplaysric]

I've only ever used Tamiya white putty for filling so far, there are a lot of other good products out there I haven't used yet, but for Tamiya white I think you want to leave it set for at least a day.

[@montyenright]

How about Sprue Goo ??? I use that sometimes and most of the time that is enough to refill the gap.

[@onuresenlik4796]

Which super glue is that? Is that 15187? Thx!

[@genessismodels]

I just use any cheap glue

[@onuresenlik4796]

@@genessismodels Is it a liquid one or a gel? Thx.

[@akosyoutub]

Yep... CA glue for the win for me.

[@trikkke11]

needle 48th is a walk in the park

[@BigAndTall666]

Try the italeri a4, it's flaky as hell, lol...

[@HootOwl513]

I thought Green Putty was a Squadron product, and they folded last year.

[@genessismodels]

this is true, need to find a new filler I like

[@HootOwl513]

@@genessismodels Darn!. I was hoping you had a new source for Green Putty.

[@robertjensen1438]

Just a comment for the algorithm

[@robertmunoz7543]

ACC glue?😳 Jman

[@adrianrichards247]

Cut / form a v when possible…filler likes that more