GENIE Wall Mounted Garage Door Opener - Worth it???

[@Growla]

I bought one of these and installed it myself with help from a KZbin video. Without a doubt the best garage door opener out there. It is hooked up to my Alexa. Works perfectly. I couldn't be happier.

[@handydadtv]

Happy to hear that!

[@jmurphy2611]

This looks like a great solution when I need a door opener. My current Genie screw driver opener is 42 years old, and at the time was the only solution because I have a 12" steel beam going across the garage limiting space for an overhead opener, so I was able to cut the screw track shorter in order to make it fit between the front of the garage and the steel beam. It is very loud, but still working for 42 years!

[@handydadtv]

Holy cow! You got your money’s worth out of that thing!

[@normferguson2769]

A lady we did some plumbing work for had a side mount opener. I was astounded how quiet it was. The chain opener I have in my new house is extremely noisy. The side mount opener is definitely on my to-do list.

[@handydadtv]

It’s a good upgrade 👍🏻

[@larry1708]

You were the most thorough I’ve seen here to date. I like those tips on the springs. We can be hours extra without your tips….thanks

[@handydadtv]

Thanks so much 😊

[@PatHaskell]

I love these side mount openers, they give me enough space to install 4 post lifts.

[@handydadtv]

That’s a really good advantage!

[@ivyfrazier8039]

Great video. You were straight to the key points and no blah blah blah. Thanks!

[@handydadtv]

“No blah blah blah.” I might use that on a new t-shirt design.

[@taeum3062]

Our new house has low ceilings in the garage so no overhead unit can be mounted. Previous owner used a DIY bracket to install an overhead unit on the side for both garage doors. The units are relatively new so I'll definitely do one of these side mounted garages when it is about to fail. Appreciate the detailed video!

[@handydadtv]

Thanks 😊

[@Myke15401]

I have a low ceiling as well. I bought this 6172 from Home Depot online and installed it myself. When I got to setting the limits, I found up was down and down was up. At this point I knew what was wrong and there was a disclaimer about low headroom tracks and that this unit is not compatible. It would have been nice if they had mentioned this on the website or box. After talking to 4 Genie techs asking for a workaround they left a message on my phone the next day saying that I’m gonna have to return this unit. I still have the unit installed and really don’t wanna go through the pain of returning it. Too bad the techs all seemed to bot have any real world instal experience. Someone must know of a way to swap around the torsion bar, pulleys, cable and bottom bracket with a separate offset idler to make this work.

[@handydadtv]

Call a garage door installer and see if he can reverse your springs and pulleys.

[@8pilgrim]

We had a two-car garage in our previous home (we moved into our new place 4 months ago). I installed the Liftmaster version on both doors. It was really appreciated as our main floor was about the garage. The living-room vibrated quite a bit and the noise was intolerable when in operation prior to the side-mount opener. What a great change for us and the future residents. Now we are in the process of replacing our 16’ wooden door and I hope to go the same route. I think I’ll look at the Genie version. Seems like some distinct advantages (Wireless, tension sensor). Thanks. Good vid

[@handydadtv]

Thanks 😊

[@berniestarzewski5482]

The vibration is not a function of the controller unless you have an old chain drive. belt or screw type does not do that. If you have a lot of squeaking it can be from the springs or poorly installed or worn out rollers. They have nylon coated rollers now that also reduce noise. These things are not worth the negatives.

[@calivalley9056]

Nice, I also had to change out mine because it was so noisy. We have a two story with bedrooms above the garage, kept waking the kids up when I went work. I also changed out all the rollers to ball bearing nylon, made a big difference.

[@handydadtv]

I replaced the rollers and lubricated the hinges too. The old rollers were also nylon, so that didn’t do much. But lubrication made a big difference.

[@robertheinkel6225]

Don’t forget to lube the center bearing between the springs. That eliminated 90% of my noise.

[@dieselcowboy777]

But that is a double edged sword....the noise would at lease alert you if it was a thief trying to get in

[@TimeAttack2003]

Quality install on a quality opener! Genie stepped up their game and made and great openers across their entire "professional line"

[@handydadtv]

Thanks 😊

[@JoshuaCollins]

Good quality I presume

[@tstewart4853]

Thank you for this video. I just purchased and am moving into a townhome where the main bedroom is above the garage. I don't know how anyone in the home could tolerate the noise from the garage door opener. I am getting one of these this weekend! You have saved me.

[@handydadtv]

Enjoy!

[@Chase023]

When I bought our current house, I replaced the traditional garage opener with a Liftmaster Elite 8500 wall mounted one. I will never go back to traditional. I like the quiet operation and that it auto locks after it closes.

[@handydadtv]

Thanks. I’d like to try that one and compare it.

[@tubesteakjohnson]

Had mine installed 3 years ago. AWESOME!!!

[@handydadtv]

Glad it’s working out for you! 👍🏻

[@akroguy]

Great job! Clear, concise and helpful. I have the same opener in the box, just need a non-crazy weekend to free up time to install it. The security options on the phone app will help eliminate those few nights where we left the door wide open accidentally. Luckily, nothing got stolen but could have been really bad.

[@handydadtv]

I have mine set to remind me if it’s left open longer that 15 minutes. Also to automatically close it at 10:30pm.

[@j.delaney5525]

You left out the best thing about the wall mounted garage door opener. The wall mounted opener allows you to raise the door tracks higher so that a car lift can be installed in the garage. Previously, the door was only 7.5 feet off the floor when it was open. Now it goes all the way up to my 14 foot ceiling.

[@handydadtv]

Good point

[@apex007]

Just one thing to point out. If you've never installed an overhead opener, then you might need two people. They are totally doable with one person. The instructions even show you how.

[@handydadtv]

Thanks

[@ericdircks]

Just One Thing To Point Out. If You've Never Installed An Overhead Opener Then You Might Need Two People. They Are Totally Doable With One Person. The Instructions Even Show You How.

[@LessThanHandy]

Our last opener quit working about 5 years ago. It was so old, Jesus' fingerprint was still on the pushbutton remote 😄. I replaced it with a belt-driven one thinking it was a great upgrade over the previous one. This one here on your video will certainly be top on my list next time mine needs replacing. Thank you for this video.

[@handydadtv]

The older ones lasted longer than modern devices. Sad but true.

[@prestonthomas9406]

Loved the Jesus fingerprint, funny.

[@bertblue9683]

Won't be long, those belts won't last

[@jamesmay9560]

How do you open during power outage?

[@handydadtv]

@James - If you don’t have the battery backup, you pull the red release cord and operate the door manually.

[@fubartotale3389]

I have a liftmaster wall mount. Its incredibly quiet and smooth, has a auto dead bolt latch to prevent prying up the door and of course has no track cluttering up the ceiling, so highly recommended, I have had zero issues with the unit, but I can't speak for the Genie.

[@handydadtv]

I may try that one next.

[@Dfk429S9fo3]

@@handydadtv You can get the Chamberlain version of the Liftmaster a little cheaper. Pretty much the same thing.

[@jerryfrederick6610]

I wore out two Sears openers due to under engineered design. Tiny drive sprocket wore right through its housing. I decided in spite of the cost of the side mount opener that this is the direction I would go, rather than replace another overhead opener in another ten years or so. I bought the Chamberlain at Home Depot installed it myself. Best opener on the market. Easy install in a manner that makes more sense than overhead center of the door pull style. To drive the spring axle directly is genius. The side mount opener is quiet, has an interface lock, frees up all the space over the door and has battery back -up which works well in case power is interrupted. Also, my existing remotes and the keypad from the SEARS opener are compatible with the new side mount Chamberlin. No track, no chain or belt. No noise, easier on my garage door. Easy to install. Great value in spite of the price. But when you subtract the cost of the overhead door opener from the price of the side mount opener it is only about $200 more. But, worth it.

[@handydadtv]

Thanks for the info

[@Doormanswift]

Your chain was too tight.

[@noahholt482]

Wasn’t under engineered you either overtigtened chain or had worn springs.

[@brandonhenn5889]

Do you put grease in your tracks to quiet the door down as well?

[@handydadtv]

I replaced the wheels and greased the hinges.

[@grizzlyinvesting]

I just installed one of these units at my house. I chose the Chamberline Rj070 since I dont have backup generator. I installed it with Nylon rollers and a silent kit hinges for a really quiet operation.

[@handydadtv]

Silent hinges? Never heard of them. Do tell!!

[@orangetaby6024]

@@handydadtv Nylon wheels instead of the noisy metal wheels you have.

[@handydadtv]

I changed the wheels too. Surprisingly the old ones were nylon too.

[@ITRMUGENITR]

From what I understand the door springs are always active so I suggest you install the deadbolt. The only time you have the doors full weight is if the springs break. Also insulate your door to help the noise or replace/Lube hinges/rollers

[@handydadtv]

Unless the emergency rope is pulled, the gears are engaged and the shaft will not turn. I tried.

[@ITRMUGENITR]

@@handydadtv that’s good to hear

[@seephor]

@@handydadtv This is correct. The reason for the deadbolt is to prevent someone from breaking the window close to the opener and pulling the manual lease rope.

[@handydadtv]

Ah!! Thanks for that!

[@quinnjets]

The lock is to prevent someone from brute forcing the door open, Overhead openers actually pull/push the door and once it's down it's "locked", the side mount could be hulked open technically

[@mozerdude8102]

I really like the idea of having the wi-fi connection to be able to make sure the door is closed after leaving the house!

[@handydadtv]

And I never wake up to the find the door was open all night!

[@Michele_in_color]

Impressed by your video... thanks! I will hire someone to install ours, but I love how you narrate and film the steps with plenty of tips. 😎🙏

[@handydadtv]

Glad it was helpful 👍🏻

[@pf5658]

I definitely need this. Went to bed with garage door wide open and didn’t realize till after I woke the next morning. Good thing I leave in a decent neighborhood. Thank god nothing was stolen. My opener is old and has a very noisy motor and chain so it’s definitely time for a replacement. Looks like none of he previous owners never changed the original opener ever. Now I know it’s that easy I’ll definitely give it a go myself. Th quotes I got to replace was ridiculously outrageous.

[@handydadtv]

Yes it’s easy to do yourself.

[@Sparky4Life913]

I installed the Chamberlain version from Menards (11% rebate) and love it. Fast, quiet and wi-fi.

[@handydadtv]

Wish we had Menards in NJ.

[@Vitamin-Q]

I have really tight clearance between the garage door and wall. It's nice to see a unit this small that might be a good fit in the future. I like the wireless network connectivity, deadbolt, and smart close features of this Genie.

[@handydadtv]

I’m very pleased with it.

[@Bigdaddy-lp7yq]

Nice! I’m going to do my research on this model. I like the idea of creating more overhead space in my garage. Great presentation!

[@handydadtv]

Thanks so much 😊

[@grizzlyinvesting]

Check out the video on my channel if your researching jackshaft openers. I just installed one on my house.

[@prestonthomas9406]

Definitely prefer the wall mounted opener compared to my GENIE (24 yrs old and still working without a hitch) ceiling mount. If ever I need to replace it I’ll be switching to this system. Thanks for the video, nicely done.

[@handydadtv]

24 years!! Let’s hope my new one lasts half as long.

[@prestonthomas9406]

@@handydadtv I was just talking to our garage door installer (I’m re-placing both doors and openers) a few days ago and he said the new Genie’s are coming out of Red China and their junk. He said he installed 3 of them at a clients home and 2 weeks later he had to go back and repair 2 of them. Hopefully you have better luck with yours.

[@handydadtv]

It’s been about six weeks so far. Fingers crossed 🤞🏻

[@arthuralzamora7331]

We got one from Lowes - I installed it with my brother. At first it wouldn’t work - played with it - eventually after talking with tech support, got a little better,but still not working - I had 2 other garage doors replaced & the installer looked at it stated binding in the tracks - lubed it & adjusted - now works awesome. On a 10x10 garage door.

[@handydadtv]

Mine was binding at first because of those spacers. I needed to move one of the tracks by 1/2” and all is good now.

[@robertheinkel6225]

My door was noisy, and found I needed to lube the center bearing between the springs. Now it makes so little noise, I can’t hear it opening or closing.

[@trimule]

@@robertheinkel6225 A huge amount of peoples "noise" problem can be solved with a good application of a can of commercial garage door lubricant (any hardware store) on the moving parts. Giving the spring itself a good spray can also help.

[@seephor]

I have the Liftmaster version. Absolutely love it and will never use a overhead opener any more. The cable tension sensor Genie has is quite unique. The Liftmaster one is just a simple arm with a switch. The switch is only closed when the cable loses tension so there's no reason for the switch to wear out. The only thing that could go wrong with it is mechanical but even if it does, it's only a few bucks to replace. I'm also not a fan of battery powered remotes. Changing the battery is just another thing you need to do occasionally.

[@handydadtv]

I hate disposable batteries too. Good thing is, the Bluetooth transmitter only uses power when you press the button, so they should last long. The tiny amount to blink the blue locator light every few seconds can be disabled.

[@StevenBanks123]

Me too. Chamberlain calls it a “jack shaft” opener. Did it myself in a day. Very quiet too. My car is a 2004 and they changed the HomeLink protocol a few years later. Got an extra $35 unit to let my older protocol bridge to the opener. Works with a slight delay. Also, no center rail so more overhead storage.

[@handydadtv]

Thanks for sharing

[@larrybruce4856]

Great video but I'll stick with my current Genie garage door opener. I have had it in use for over 30 years and have never had an issue with the opener using occasional lubrication of the screw drive and garage door track wheels, and replacing the remote control battery about every 2 years. Very reliable.

[@handydadtv]

Good to know they last 👍🏻

[@seancolon9890]

My wife has wanted one of these for a long time. Our garage has really low ceilings so we can not install any other type of garage door opener. One day Ill be able to get one of theses.

[@handydadtv]

It’s a good solution if you have low overhead.

[@noahholt482]

They are not to be installed on low headroom

[@greatsdeals3014]

Great buy. You can oil your rollers and track to quiet to door when opening and closing.

[@handydadtv]

Yes I do. Thanks.

[@TharonJames]

Do you need a plug near the opener?

[@handydadtv]

Yes, code doesn’t allow extension cords with garage door openers.

[@johnaquino4291]

First, I'm an overhead door dealer, in business for over 35 years. Chamberlain operators, be they the older Sears Craftsman, Master Mechanic, Raynor, Liftmaster, etc. enjoy excellent parts availability. Most major distributors carry Liftmaster, NOT Genie. Genie was bought out by Overhead Door some years ago, and Overhead Door products have declined in quality over the years (Wayne Dalton merged with Overhead Door - ask anyone who's gone to Lowe's and bought a garage door that's constructed of cardboard with a vinyl overlay what they now think of Wayne Dalton). One thing that struck me about this particular installation was how the Liftmaster was installed. If noise lever was an issue a DC belt operator could have been installed. Moreover, Chamberlain used to offer a "vibration isolation" kit, that can still be found online, that effectively isolated the operator head from the hanging angle, dramatically cutting down on vibration & noise. The biggest issue with Genie is their lack of technical support - out in the field, when I've tried to call Genie for technical assistance, the wait time has been ridiculous. I do not repair any Genie products, nor do most of my competitors. If you buy a Genie product online and run into an issue, good luck trying to find an overhead door company that will service your Genie operator, especially if they didn't install it. If you actually want to learn about operators seek out content from actual overhead door companies that have been in business for over 20 years - we all know something the average DIY'er doesn't.

[@handydadtv]

Thanks for your feedback. I guess Genie is more of a household name and does a better job of direct-to-consumer advertising than LiftMaster. But it’s really good to get a pro’s perspective even though I still advocate for DIYers.

[@dtxgmoney]

Dang this was an excellent takedown of Genie and hopefully it's a comment those (like myself) read who were considering buying one.

[@JackT_Music_on_Vinyl]

When was the last time a garage door opener (not springs, wheels or rails) broke down and was not just replaced by service Co? I've owned 5 over 40 years in different homes and only replaced one due to burned out motor. That said, it does seem the Chamberlain is fine but the Genie is just slightly lower priced. Maybe worth spending a few bucks more for Chamberlain or LM.

[@saltysteel3996]

Weird how Genie has better reviews on every website in the last few years compared to the other brands.

[@updatename6637]

I have genie for 11 years….. not even one issue !!!!!!

[@patmason7276]

Cool setup think I'll give that a try when our old ones go out.

[@handydadtv]

Thanks

[@Rabbitsarewonderful]

Darn! I didn't know there was such a thing, and I just got a new ceiling unit! Next time. And, by the way, you are very clever, and I hope your wife appreciates you.

[@handydadtv]

She does 🥰

[@sasanfahimi7262]

Hey man, really good video. I like that you get to the point and still covered important details of the install. Thank you!

[@handydadtv]

Glad it was helpful 👍🏻

[@Co-SS]

I have one of these for my 1 car garage. since I got it setup for a high lift. Pro said that the side mounts can be a real pain. you have to have a separate locking bolt since you could just raise it. the only time you should look at one of these is if its a one car garage door. they suck for 2 car garage doors cause they are so heavy.

[@handydadtv]

If the springs are set correctly, the motor shouldn’t feel the weight. Mine is working fine so far.

[@Co-SS]

@@handydadtv just telling ya, this is a pro been doing this for decades. one the pressure is not balanced on top on the bar. its got to come in the side. two its a pain to adjust and keep working. I have had no issues with mine yet but I could totally see on a two car having this just not work for long. Anyone reading this, no one gets a side mount opener unless you have to. like I did so I could get a car lift under the door while opened.

[@patmcbride9853]

I'd love to ditch the overhead track, but I have an extension spring setup, although I love that my springs have held up for >25 years. 2:42 That cable is looking ragged.

[@handydadtv]

Thanks

[@michaelkendall3379]

Call a local garage door repair place. Your door can be converted to a torsion spring.

[@frankpropri540]

I'm a professional garage door technician I've installed both the LiftMaster and the genie do yourself a favor purchased either the LiftMaster or the Chamberlain unit much better quality!

[@handydadtv]

Thanks for the tip

[@TheWagnerAdventure]

I just put mine in. Love it! Super quiet

[@handydadtv]

Awesome! Enjoy it.

[@Tleffew1]

Just found a solution for my garage golf simulator! I will be getting one of these so I can put my projector where the opener is. Thanks!

[@handydadtv]

That’s a good use-case I didn’t think of!

[@CJ-tx8nu]

Thank you very much for the video. Great information. I had installed the Liftmaster in a previous house, but I think I will use this one for Melyssa new house. My spaces are tight and I like the narrower design.

[@handydadtv]

Was that a wall-mounted LiftMaster?

[@LuxAudio389]

Use Garage Door Lube to lubricate thoroughly lube your tension springs, roller pins (not the track) and all the door hinges and your door will virtually be silent. Also take a socket and make sure all your hinge hardware is tight.

[@handydadtv]

Thanks 😊

[@ItsEverythingElse]

It's nice that this Genie doesn't need a cable tension monitor but the cable keeper is an extra piece to install (two pieces actually). Does the Chamberlain require a "cable keeper"?

[@handydadtv]

Not to my knowledge

[@sentaya809]

Good video. As a Garage door installer I give you a 9 out a 10 installation and that only because I saw that the left side take up cable need to be replace. I recommend to replace both (by a professional) never touch those springs you can lose a limp in a blind of a eye. Be save

[@handydadtv]

Thanks. You’re not the first to notice that cable.

[@sentaya809]

@@handydadtv Haha I did it for so long that my eyes can't pass it 😅.

[@SAVAGEROAMER]

Glad i found this. My old unit trys to bend the top panel everytime i close it via the motor. Thanks for uploading

[@handydadtv]

Yeah that’s not good.

[@kwdthatsme2711]

Well, that was a completely outstanding video - Thank You Very Much for creating this content. Time for me to DIY my shop garage door and enjoy the automation!

[@handydadtv]

Thanks so much 😊

[@mdemers767]

When I was younger, my family's chain driven unit conked out and my dad replaced it with an overhead unit that had a threaded shaft instead of a chain. I thought that thing was SO quiet compared to the chain system. Then years later I was working as a house painter, and some lady had what must have been one of the earliest wall mounted lifts like in this video. It was practically silent! Like literally silent. I don't know what brand it was, but it was WAY quieter than this Genie, but I'm sure the Genies are pretty quiet compared to any overhead unit.

[@handydadtv]

I haven’t seen a screw drive since I was a kid!

[@keithhere5868]

Master make one too

[@StefanMueri]

Amazing had no idea this exist, added to the my house project list

[@handydadtv]

And that’s probably why they’re more expensive. Nobody knows about them so they don’t sell as many.

[@imknot]

My Daughter and Son in law have one of these on each of their garage doors. They were installed with new garage doors by a professional garage door company. I believe It is a chamberland it has the cable slack levers. I have been over to their house numerous times to rewind the cables due to the door opener being activated while the car was in the door opening. (grand kids lol) While there was no serious damage to the door, car or opener I have definitely decided I won't be installing these units on my doors. Also there is the issue that the door tension spring has to be biased to allow the door to come down and not be balanced. Which in my opinion is an unsafe condition because when you pull the release cord to operate the door manually the door automatically wants to come down. Those two things are what are keeping me from purchasing this unit.

[@handydadtv]

I didn’t touch the spring and mine works fine.

[@nightcoder5k]

Never trust a professional garage door company entirely. They often show up, get the job done as quickly as possible then leave. They can do a shotty job. Regardless of which garage door opener is installed, if you pull the release cord, it should not want to come down. The door should be sticky at any point as you pull it up or down then let go of your hand. If it doesn't stay when you let go of your hand, then the spring or springs need to be adjusted. I would have someone knowledgeable check the installation before a serious accident happens.

[@noahholt482]

That is a poor install . You do need the Correct track set up the reason for the spring and cable issue is installers that’s think less tension will help the door come down easier causing cable slack

[@latu8923]

Thanks you got a new sub here. I was in the market for a new garage door opener and I was doing some research and happened to picked your video. I guess it's a win win situation both ways, you got a new sub here, and I'm ordering a Genie to replace my old 15yr Craftsman opener..thanks for sharing.

[@handydadtv]

Thanks for subscribing! Welcome to the family!

[@THEDC777]

That left torsion cable is freying. Youre going to have an out of level door soon with a gap on the bottom. Ive done doors for 24yrs & that genie jackshaft is a good unit. Its pretty close to the liftmaster version. The liftmaster has a cable tensioner that is better. If the door starts down & slack is thrown into the cable, it stop & reverses back open. Its just a fail-safe to prevent cables from being thrown off drums & having a racked door. Nice install my friend👍👍👍[edit] love that tesla too

[@handydadtv]

Thanks! Do the cables get replaced in pairs?

[@ethelryan257]

@@handydadtv Always.

[@jeffw8057]

The genie operates in the same manner...and won't even start to go down if the cable tension is improper.

[@tbirdracefan]

I have a liftmaster on the 12x12 door in my Barndominium. Had it for close to 20 years only having to once replace the motherboard. Remotes for Liftmaster tend to not be as supported as the one Genie use. Thinking of adding a second one to put on my door on the other side of the building and glad I now have a choice.

[@handydadtv]

Thanks

[@RafaelSwit]

Is it possible to add a second set of safety sensors at the top of the door? With storage shelf above the door, there’s a chance that someone could be up on a ladder while another person drives up and initiates the door lift. Neighbors a couple years ago accidentally lost a cat which got stuck at the top of the door.

[@handydadtv]

I don’t think so.

[@bradhineman4796]

Maybe you've already answered this but have you had to replace the batteries in the wall console? If so how long did the batteries last and do you have any dislikes so far?

[@handydadtv]

I haven’t had to change the batteries yet, but the wall console freezes occasionally and I need to remove a battery temporarily to reset it. That’s my only complaint.

[@bruceaugustine6486]

I bought a house that has a car detached garage but there was only 1 door with an opener. the closest door to the house had a Lift Master opener with a chain drive there was nothing for the other side. on Black Friday the local Home Depot had a Genie that came with 2 remotes, and it had a built in light 3/4 hp belt drive and a battery powered keypad and the safety openers. with wifi for $75.00 so i bought 1 and installed it. I couldn't believe how quiet it was. I liked it so much the following year on Black Friday they had a similar one that had a wall mount button but also had battery backup, so i grabbed one and replaced the Lift Master $85.00 and now the 2 doors open nice and quiet. So, both doors for $160.00 and they have worked flawlessly.

[@handydadtv]

Thanks for sharing

[@robertheinkel6225]

I am on my second belt drive Genie opener. First one was hit by lightning. Easy to install and adjust.

[@handydadtv]

There seem to be a lot of Genie haters, but I’ve always had good luck with them.

[@jetpuffed47]

I like this solution - I too use storage above my garage that precludes me from having a door opener on one side. This would solve my issue and agree it would be much quieter - Seems like whenever the garage door is opened or closed its loud enough to inform everyone in the house.

[@handydadtv]

That happened with every house I’ve owned. They all had overhead openers.

[@horacewones6570]

Looks like the way to go. Thanks for the video

[@handydadtv]

Glad it was helpful 👍🏻

[@DIYReid]

05:26 How many times do you try to hit the garage door button on the wrong side now??? :D

[@handydadtv]

Constantly!

[@yaminshao8181]

may I ask what is the door width/ height? I wanted to install the same for my 18ft*7ft door but my contractor strongly suggested to not do wall mount.

[@handydadtv]

That’s the size of my door. Maybe get a second opinion.

[@joeyhazlett]

I've had to replace two garage door openers in my life so far, and both times I went with a wall mount unit. I'm never going back to overhead units.

[@handydadtv]

Good to hear! Thanks.

[@t.r.766]

still have an original I-drive unit once you use this type of shaft torque system you wont go back ! The overhead space is so nice 👍

[@handydadtv]

Thanks for the info

[@uknowwhatthisisfor]

I've installed two chamberlains and am going to install one more!

[@handydadtv]

Nice!

[@thehobbyshop5306]

Just took down a brand new Genie 6172H that was glitchy from the get-go. They also put out a constant, annoying transformer hum which the Genie help line says is completely normal. Replaced it with a Liftmaster 8500w and am much happier with it across the board, including the app.

[@handydadtv]

The only glitchy thing on mine is the Bluetooth remote. It stops working every few months and I need to pop out a battery to cycle power. Then it’s fine.

[@thehobbyshop5306]

@@handydadtv How's the transformer noise level on yours? Maybe I got a bad one.

[@handydadtv]

No noise at all

[@cycloneyou]

Great video will be getting one next week. My old opener got to be 90 plus noise.

[@handydadtv]

Mine’s still working great.

[@Kyle-ev4fk]

pretty cool, definitely worth it if you are in the market

[@handydadtv]

I agree

[@TheFeist77]

will this work on a roll up door like they use on metal buildings and mini storage?

[@handydadtv]

Possibly. I’m not sure.

[@pcelectronicsaudiorepairan4164]

Hiya, I'm a bit concerned by the unit twisting at 6:24. Doesn't look good for wear and tear.

[@handydadtv]

We’ll see. But I think it’s got flexibility in the bracket by design.

[@pcfxr4u]

@@handydadtv Seriously, Contact the manufacturer, see if that's normal. Generally speaking, that twisting indicates misalignment, and energy being diverted from the planned point if delivery. BWDIK?

[@noahholt482]

It’s normal . If it didn’t flex some it wouldn’t last

[@pcelectronicsaudiorepairan4164]

@@noahholt482 I don't buy it. Other installs on YT don't flex. Something is mis-aligned, or out of round. My last comment.

[@Mexicanracing]

Any updates on this?

[@mv.m5438]

Did you remove the center overhead unit? I didn’t see you remove it on the video.

[@handydadtv]

It wasn’t part of the video.

[@mv.m5438]

@@handydadtv ok thank you.

[@lenwheeler9695]

I have a lift in my garage, this opener would give me a lot more height with my lift by eliminating the rail for the current garage door opener.

[@handydadtv]

Yes indeed

[@chancewaddle2303]

Does your unit flex at all when in operation? I notice mine flexes or sways but it’s rock solid on the wall.

[@handydadtv]

Yes mine sways as it turns. It’s possible the shaft isn’t perfectly straight, or that I didn’t align it precisely when I attached the collar. The bracket appears to allow the flex, so it’s not an issue.

[@MrBurgandy25]

At my old house I replaced a noise chaindrive door opener with a Belt drive Genie. Was fantastic, my only issue (and one I hated, which is why I probably won't get another Genie) is that with the door open crossing the beam didn't turn the overhead light on. It makes the garage too dark when out with small children, a dog, or it getting late out while hanging outside. My new house has a genie, and same thing, this one's worse though, not only does crossing the beam do nothing, if you press the light button on the pad, it will not go back out. I found this out when I pressed the light to grab a beer one night, about 3 hours later I went to grab another and the light was still on. I'll probably be getting the direct drive chamberlain or liftmaster, unless the genie finally added the beam crossing light feature.

[@handydadtv]

I know what you mean. That’s a good feature. Mine doesn’t have it either.

[@jordanrx1]

I believe I am having the same issue you were having with your cable keeper. The cable keeper opposite my opener tends to come detached from the nylon eyelet. It does appear that the space between the track and door is to narrow. I wasn’t sure how you resolved your issue. Any help would be appreciated. Thanks

[@handydadtv]

I loosened the track bolts and spread it a little. Problem solved.

[@jordanrx1]

@@handydadtv thank you

[@arabinow]

Do you need a certain amount of ceiling clearance for the install?

[@handydadtv]

It doesn’t go much higher than the shaft, but you should check the manual online to be sure.

[@ShouVertica]

Thanks for making this video, it helped a lot!

[@handydadtv]

Glad it was helpful 👍🏻

[@tacocin]

Always good to know what options are out there!

[@handydadtv]

Thanks

[@MrVeeBlog]

Good stuff. I'll need to look at these a little more before committing. Besides, I'll have to convince the wife of yet another of my investment ideas. She's already talking about storage systems on the ceiling. So, this could possibly work. hehe. Thanks for the video.

[@handydadtv]

It’s a good solution if you can take advantage of the height in your garage.

[@SunnySunny-jz8kg]

Does it stop if the door hits some thing on the way down before the cables to loose and fall off the drums?

[@handydadtv]

Yes. It’s stops and reverses.

[@MidwestMotor]

I wish you would've shown how you worked that massive spring-arm /shaft and installed it into the Genie wall mount. But great video.

[@handydadtv]

I didn’t do anything with the torsion spring. The opener slides onto the shaft.

[@MidwestMotor]

@@handydadtv After I wrote this I realized that spring isn't messed with and how easy this install really is - except just time consuming and a lot of steps. Thanks.

[@kyak938]

question, I have an older wooden 2 car oversize garage door, big enough that I can fit my conversion van in, i.e. taller than most....is this a good opener choice considering the weight of the door, do you think? there is currently little clearance with the currant overhead rail and I'm ready to replace. I've seen other reviews that say this is not a good choice for heavier doors.

[@handydadtv]

I’m no expert, but I didn’t think the weight of the door matters because the spring does most of the lifting.

[@gsxr600rafii]

The genie is the best wall mount operator for garage doors out there right now residential wise. It is not recommended to install them like you did on your specific setup of garage door. They should really be used in a high lift configuration not a standard track like you have at your house. Unless your door works absolutely flawlessly it will give you problems over time. It will throw the cables the door will get sideways and almost fall out of the tracks. We repair those every single day around here. Like I said they are great but they have a specific application that they are designed to be working with.

[@handydadtv]

Is there any literature or studies to support this claim? Because all the brands say they work on normal height doors like mine.

[@noahholt482]

@@handydadtv it’s like a bare minimum code . Yes they can work but they work best on at least 15 inch radius track or high lift ask any professional company and they will tell you it’s nothing but issues

[@973C8]

Just found your channel and successfully installed the Rachio. I;'m now moving on to this same exact opener. How has it been for you over the past year? Thanks!

[@handydadtv]

This opener is awesome. Expensive but really a good and quiet machine.

[@EricPardo]

Great stuff, glad to know I too can install it myself!

[@handydadtv]

Yes you can!

[@tomg6284]

Good info. Just what we need.

[@handydadtv]

Glad it was helpful

[@cmckee8056]

Just curious how this opener is holding up since you've had it for a year now? I'm very interested in replacing our old noisy openers with something like this. We also have a detached garage that has a very low ceiling, the previous owners cut a hole in the sheetrock in order to install an overhead opener.. SMH!🙄

[@handydadtv]

I’m still using it. Working great. Only complaint is the Bluetooth wall control loses its connection and I need to pull out a battery momentarily to reset it. Maybe once a month. Not terrible.

[@yoboyjose5.361]

I believe you said your door is quite heavy, went on manual mode? If so, it’s best to replace your springs. One because the springs might be old already or two they installed the wrong springs. You should be able to lift the door with one hand only. And also see from the video that the wires for the door for sure need replacement. The last thing you want is for them to snap and now you got yourself a leaning garage door with the bent corner. Just some tips 👍🏼

[@handydadtv]

Thanks. New springs and cables are on the to-do list.

[@yoboyjose5.361]

Will definitely feel the difference

[@gvet47]

So on a power failure how can you manually open the garage door? How do you disconnet the drive?

[@handydadtv]

Yes, like any door opener, you pull the red cord to disengage the motor. Then operate the door manually.

[@uf1978]

Looking into buying one of these. Are you still happy with the Genie? I'm between this and the Chamberlain. Thanks for sharing!

[@handydadtv]

I haven’t tried the Chamberlain, but I’m very happy with the Genie.

[@edrumsas5420]

Very cool. Not in the market for an opener- however you never know. Lol.

[@handydadtv]

I wasn’t either. Until mine started flaking out on me.

[@royromano9792]

I’d like to get one of these. I’m just worried about the width of the device. From my wall to where the shaft starts is only about 4-5 inches. Think it can be done? I know the specs say 6.8 inches wide. But do you think there is any play there?

[@handydadtv]

What about the other side?

[@royromano9792]

@@handydadtv same size

[@handydadtv]

I don’t think that’s enough room.

[@scdi12]

We have a low ceiling. 3.5 inches from the ceiling to the bar that the opener needs to attach to. Is this enough space in your opinion? Thx for the video. BTW-Thx also for having a Tesla.

[@handydadtv]

I think you’ll be fine, but I’d take a look at the manual online to verify the required clearance.

[@scdi12]

Thx much@@handydadtv

[@TruthTroller]

Cool video!!! I've been watching and learning cool new ideas for many years, so I'm a fan of your channel. This one is really cool, and I would definitely consider using this if/when mine needs to be replaced. Anyway, I just would like to know if there's any chance you could do maybe like a one-year update to see how its holding up. How long have you been using it??? THANKS FOR THE CONTENT!

[@handydadtv]

Ask me again in a year 😉

[@donroy9968]

Nice video. How is it operating 1 year later. Another question that I have is , would I be able to operate it without Wi-Fi, as I would need o e at my cottage that doesn't have internet.

[@handydadtv]

@donroy9968 Great opener even after a year. My only complaint is the Bluetooth wall remote occasionally needs to be reset by removing/reinserting the battery. Maybe every 2 months or so.

[@jeffw8057]

I installed this garage door opener about one year ago...and agree it's very quiet, frees ceiling space, and performs wonderfully. My ONLY complaint is with the two spring brackets that are installed on the lower rollers and attached to the cables of the doors. These spring brackets (which assure proper cable tension during closing) are buggy and often get jammed while the door is in the up position and keep the door from closing. Attempts at reshaping the arms and the use of spacers have yielded varied results but have not solved this issue. I can not trust the door to close properly and have to double-check it all the time. This aspect of this otherwise wonderful opener should be re-engineered for a better solution.

[@handydadtv]

Interesting. You would think a simple spring would be a better solution than a cable sensor. Now I’m not so sure.

[@jeffw8057]

@@handydadtv In concept...I agree. But the reality is that garage doors...specifically the lower cable attachment bracket, and the spaces (tolerances) involved vary considerably by age, usage, installation, rail types, etc....and this challenges the spring design and shape, and its ability to perform. It's frustrating that a tiny and inexpensive component can render an otherwise wonderful opener inoperable.

[@followerofgod7935]

As a professional garage door installer, I have brought this up to Genie. Some brands of garage door tracks are not as tight where they meet as they should be. This allows for a small window where that cable tension spring can get caught right in-between. Once that happens it will jam up the garage door and cause problems. I will remove these entirely if the door is properly balanced and rolls perfect in my eyes. I am not telling you to take yours off, but you might want to have a professional look at it first. The engineers put a lot of work in developing this stuff to work right but they don't test every brand of door nor can they test every scenario.

[@jeffw8057]

@@followerofgod7935 Thanks. Good advice. Yes, I have talked with Genie a number of times over the phone and, although they were quite friendly, I didn't get a good solution. I've considered removing the springs...my door is well balanced but I fear having the cable loose when closing and then not functioning properly.

[@followerofgod7935]

@@jeffw8057 If the cable tensioning springs are causing the problem.....then remove the problem. 😉 The homes that we have removed them on are still working just fine. 😊

[@clayhughes3263]

Holy cow that door squeals! I bet if you sprayed some $5 garage door lube on those wheels and tracks once in a while you’d quiet it down another 20 db lol

[@handydadtv]

I replaced the rollers and lubed the hinges too. Thanks.

[@wgrasqu]

I got the same unit all is working well but the app saying status unknown so its doesnt know it the door is up or down. Its show connected in the app but i cannot do anythign as the app doesnt know if the door is open or closed.. did you have to do anything to make it work?

[@handydadtv]

Repeat the app setup process. If you still can’t get it to work, 👉🏻 store.geniecompany.com/pages/contact-us

[@blackstorm86]

Where did you buy the cross shaft and torsion springs?

[@handydadtv]

They were installed with the door.