Genius ideas 💡How To Cut A Floor Tile Circle ✅ How To Drill Into A Tile Wall. Tile Cutting

How to cut a circle in a piece of tile for the toilet bowl or how to make a hole in a tile, I will show you all these things in this video.
For the first example, I used a special drill for ceramics and glass, then I used a normal drill for concrete and brick, with which I enlarged the initial hole.
For example 2, I used a grinder with which I made a hole for a drain pipe, to which I attached a special disc for cutting stone. With this method you can make holes much bigger than that.
If you liked it and it was useful for you this video, do not forget to subscribe, if you have not already done it, and press the bell to not miss the future videos.
/ @diyideashub
Please tell me what you think about this project and if it was helpful. Also, if you have any questions, please do not hesitate to address them to me.
Another video that might be helpful to you is:
• Video
Please note that we do not offer any guarantee regarding safety. Any action you take in connection with the information in this video is strictly at your own risk and we will not be liable for any damage or loss. It is the responsibility of the spectator to use judgment, care and caution if he intends to reproduce something of the presented.
Music: Epidemic sound.
All best!
#diy #tools #floortile #tile #bathroom

[@DIYIdeasHub]

kzbin.info/www/bejne/jaaaaYNmjcicgqs

[@DIYTechTrends]

Super work 😍

[@DIYIdeasHub]

Thank you. 🙏

[@SallyK-k9m]

I have seen the second method but the hole was made through the back, this seems to me a much better option, thank you.

[@DIYIdeasHub]

Thank you. 🙏

[@dustinsmith4860]

Diamond hole saw for small hole. Big hole, cut slightly smaller, then use a diamond shaping bit to get up the the line. Will be MUCH cleaner cuts. (and faster)

[@DIYIdeasHub]

Thank you. 🙏

[@ctuht]

Я такое делал 25 лет назад, когда ютуба в планах не было

[@Mitza-u1x]

Good job, useful tips. 👍

[@DIYIdeasHub]

Thank you. 🙏

[@karenparker7830]

I just looked up for myself freecut tile and glass cutter. There is one tool that scores the tile and then you apply the clamp that is a part of the same tool and it breaks perfectly on the score mark. It is faster and cleaner break. It cost less than 30$ on Amazon and at Lowes.

[@Franco-yo2uv]

Super useful stuff, nice work 👏👏

[@DIYIdeasHub]

Thank you. 🙏

[@NangaiEsther-nt4cb]

Good 👍👍

[@DIYIdeasHub]

Thank you. 🙏

[@PretonCast]

Pare foarte ușor de făcut, e bine de știut. Bravo pentru idee👍

[@DIYIdeasHub]

Thank you. 🙏

[@mario2011mc]

Nice work, thank you man.

[@DIYIdeasHub]

Thank you. 🙏

[@snooze1950]

Ça aurait pu fonctionner avec la mèche à béton si tu ne mettais pas le cogneu sur la drill.

[@LanceMcGrew]

I need to cut an outside circle and have it not look like it was cut by arthritic beaver

[@jazzlover10000]

Use the angle cut method he used three times on three pieces of tile... the third one will come out circular (if you aren't a beaver that is). Do _try_ to make it circular each time one will come out fine (probably the third try). These tiles aren't generally expensive so you can break a few and not care.

[@rodrigograjales5038]

😅😂😅😂😅😂😅😂😅😂 castor.😅😅😅😅👍👍👍

[@MichaelT.-fy7wj]

Good job! Tks

[@ToniP.-vy9bu]

I like both methods, a useful video that I will save. 🙂

[@DIYIdeasHub]

Thank you. 🙏

[@govardhanagirivenkateswarl3731]

Smart Tip

[@DIYIdeasHub]

Thank you. 🙏

[@alterstassfurter5743]

Einfach das Schlagwerk ausschalten...billiger geht's nicht!

[@willamorim7492]

Good

[@tkytkytky1403]

Thanks for the video. The second tip is really awesome, way easy to do something like that than I thought

[@DIYIdeasHub]

Thank you. 🙏

[@DegeaVR]

Very nice.

[@DIYIdeasHub]

Thank you. 🙏

[@colexcolorart8230]

Good job, really useful.

[@DIYIdeasHub]

Thank you! 🙏

[@zulsyed486]

Brilliant and TQ for the tips

[@DIYIdeasHub]

Thank you. 🙏

[@gustavomunevar3157]

Compre tableta buena. Si es del caso remojela 24 horas. No le ponga el martillo al taladro. Acaba con todo el enchapado por una tableta que necesita? Chambon

[@DIYIdeasHub]

Ok, thank you! 🙏

[@charlys1219h]

That's very stupid if you drill any tile with the rotor hammer, never, never use the rotor hammer to drill any tile.. and all the drill bits for glass will drill any tile like granite, Porcelain, Travertine, slate,ceramic, ( you don't neet to punch it first) if the drill bit spin around on any surface is because it doll doesn't have any more sharpening, that's when you need to get a new one or otherwise will heat up and will possibly the tile or the bit will brake.. even if you pour water to minimize the heat will take time to drill and will evaporate the water...there's special tool for any application's..

[@nafsinafsi8180]

Pourquoi j’ai pas vu cette vidéo avant-hier 😢

[@DIYIdeasHub]

Thank you. 🙏

[@siprianeduard1154]

Gaura din mijloc pentru ce ai dat o daca ai taiat cu flexul, sa se sparga usor pe interior?

[@DIYIdeasHub]

It is another tile that I cut with the grinder, there are 2 different examples and 2 different tiles. 🙂 Tks! 🙏

[@FrancoMez-cl9qs]

👌

[@DIYIdeasHub]

Thank you. 🙏

[@cedric6545]

👏👏

[@DIYIdeasHub]

Thank you. 🙏

[@user-bi4bm2th1l]

👏👏👏

[@user-ry1zy1st9s]

Дырка у тебя, а это отверстия 😂

[@guerotemartin3042]

Un oyo por broca

[@Sub_zero0107]

😂😂 WTF I'm a professional builder

[@DIYIdeasHub]

Good for you, but this is not for professionals with professional tools.

[@selim.gravto]

Nice tips. 🙂👍

[@DIYIdeasHub]

Thank you! 🙏