The measuring and centering the marks to cut was great. Cutting the tile in half was not necessary, none the less I still learn from this video. Thumbs up either way knowledge is power 👍
@sambulate5 жыл бұрын
Over the years, I have learned a lot from KZbin and always use the comments as a yardstick to gauge whether or not the person I'm watching is on the ball, or full of crap. I think there must be different ways of going about what you did here--either by cutting the tile in half, or by drilling a hole with a diamond bit, or some other method. I'm approaching my first floor tile project, and am rather nervous about it. While I'm sure your method may not be perfect, it mostly makes sense to this relatively experienced DIYer. I may need to adjust the technique to fit my (teeny, irregular) space, but this gives me one more tool in my belt. Please, keep on making great (and free, haters!) content, and don't let the mean turkeys in the peanut gallery get you down. You've had a part in knocking my confidence up a notch. I truly appreciate it.
@rumour98095 жыл бұрын
His technique is decent, but coming from a professional time setter, he shouldn't have split the tile regardless of if it's going to be hidden, if I did that on my jobsite I'd be asked to redo it properly, def works for DIY or handyman but I wouldn't recommend this technique for any professional installs
@toodjackson4438 Жыл бұрын
Yeah I wasted 3:15 to see that this isn't what I'm going to do. The water is definitely going to get behind it
@fododude6 жыл бұрын
Video called "how to cut a hole in tile." Never shows cutting of hole in the tile.
@graphiteguy90286 жыл бұрын
True
@AK-eq1pi4 жыл бұрын
😂😂😂
@galileofig6 жыл бұрын
this video shows how NOT TO cut a hole in the tile
@frazerward367 Жыл бұрын
Agree
@ArksE86 жыл бұрын
The measuring method was good. But I'll then use a tile drill bit
@lanthonyperdum64303 жыл бұрын
I agree totally !!!
@shepss2175 жыл бұрын
The whole point was to not have to split the tile in half, made no sense
@warwickwas5 жыл бұрын
Give him a 'break', he was 'Half cut' at the time...
@catlady83244 жыл бұрын
Thomas Sheppard 😹
@TheSmithyt3 жыл бұрын
🤔
@BREN20093 жыл бұрын
Measure tile like he has done but then once you have a square draw corner to corner so you have a cross in the middle that gives you centre then use a correct diamond tip hole cutter job done
@occasx Жыл бұрын
one can only assume diamond tipped tile cutting hole saws did not exist when this video was made.
@jorge314159274 жыл бұрын
This is absolutely unacceptable .. I would fire the tile contractor immediately if he / she did this type of work.
@ServeMySoul7775 жыл бұрын
WOW! The amount of craftsmanship in this video is AMAZING! (Can you sense the sarcasm lollll)
@mdalaminkhan-khans-power360Ай бұрын
many many thanks. I want more video's. tips and triks
@chriss4365 Жыл бұрын
I'd use a cardboard template to mark on the tile where to cut the hole. They have tile hole saws why cut in 2 pieces?
@emmanueleverett98564 ай бұрын
Do you know how long I've been trying to find this has been over 3 years trying to find a video like this God bless you
@BrooklynBalla4 жыл бұрын
I’m confused.Why did you need to cut the tile in half?
@turboduckhead61798 ай бұрын
You could do corner to corner of the square to find the centre of the square.
@1bestvideos4 жыл бұрын
why did you cut the tile in 2 pieces?!! you had the hole, just drill it!
@jayferreria15374 жыл бұрын
Thanks now I know how to cut a hole.
@TedDixonChannel5 жыл бұрын
Measuring part was useful but you didn't show cutting the hole as per the video title and why the bloody hell did you break the tile in half?
@kraseto92112 жыл бұрын
Why split in half after hours of taking measures???
@fododude6 жыл бұрын
Damn, the Brits love to make How-to videos.
@mistak31266 жыл бұрын
perfect for the trailer park
@_Elfaro6 жыл бұрын
Hole cutter?
@lazarsjojic2 жыл бұрын
The idea was not to make circle hole in the middle of the tile. Image what would you do if instead of this little pipe, you had a pipe of central heating??? Then making only a hole in tile would not work. But the idea of splitting the tile, and then reassembling it was great.
@stevemakowski97762 ай бұрын
Does the term " Diamond hole saw" mean anything to you?
@green2008z5 жыл бұрын
man this guy is way out his mind do we need this shit to cut a hole at his center hell no
@almanibedari4 жыл бұрын
You don’t need to cut it
@ez38173 жыл бұрын
Why not use a hole cutter for pipe ? Far better finish.
@MarkKempner17 күн бұрын
Did fine until cutting the tile in half!!! Just cut out a HOLE with a tile hole cutter. Simple!
@countryasjed16904 жыл бұрын
Take this off the internet...
@Munson-lz5gh Жыл бұрын
What was used to cut the tile with?
@bdtilesdesigner75163 жыл бұрын
Nice
@adab42165 ай бұрын
I did same instaling wall tap and my wife doesn't happy when saw half tile facing her eyes 😂
@omprakashkumarkumar37594 жыл бұрын
गोलाई में टाइल्स कैसे कटेगा
@webaruhazberles6 жыл бұрын
this was made in 60s
@benexbriz4490 Жыл бұрын
any the method is good but after cutting the tile ahalf its not work better
@stephensharma4994 Жыл бұрын
why not use a hole saw ??
@nicktanner56066 жыл бұрын
That's a terrible way of doing it. Mark the hole exact centre by drawing corner-to-corner lines in the resultant square and then cut using a tile hole cutter. No need to snap the tile in two and have a broken tile!
@drygordspellweaver87616 жыл бұрын
It's clearly not in the center of the tile
@thanxx5 жыл бұрын
fkn knob
@dannytaylor68442 жыл бұрын
@drygord he mean centre of the square you sausage
@benexbriz4490 Жыл бұрын
thax
@filipino_GMA5 жыл бұрын
you never split a tile for a hole, this is really bad, especially with todays hole saw are so cheap to buy to make a perfect hole. this video should be banned on youtube. and the cut around the pipe was too rough , sadly this video had so much potential.
@nabinsinghthapa2794 жыл бұрын
Old school!
@thomasmalone66545 жыл бұрын
Or just use a masonry hole saw, done.
@paulgillbanks21114 жыл бұрын
This was made in the dark ages
@ramadanahmed8925 Жыл бұрын
Have you ever heard of hole saw
@tomassvatik39484 жыл бұрын
What was the point to cut the tile in half?
@sydneyrogers9697 Жыл бұрын
What?? I've never seen this before. OK I guess if a vanity or other fixture is hiding it.
@nkgolan2 жыл бұрын
u can install the tile complete
@igorparamount30995 жыл бұрын
How to cut a hole in tile
@twickersruss2 жыл бұрын
This was disappointing as it leaves a cut line right through the tile. I was expecting use of a hole saw for professional job.
@pallikorva115 жыл бұрын
What was that? Have you ever heard of tile drill bits?
@deborahhughes88672 жыл бұрын
Showed measuring, then cut the tile in half, the the pipe hole magically appeared - absolutely NOT a ‘how to’ video
@andyrbush Жыл бұрын
The video has nothing about its title!!! How to Cut Tiles! The whole idea of watching was to find out how to 'CUT', not how to 'MEASURE'. But why not show the cutting? Anyone can measure where a hole goes.
@lindafoofoo5 жыл бұрын
"Almost invisible",,,but not really. Also not really waterproof. Better to but a diamond tipped hole saw, the right sized, or used a small, carbide drill bit to cut several, small holes around the perimeter of the hole and break out the circle.
@jurnagin5 жыл бұрын
smh! that cut tile will look awful, unless you apply some filler in crack and paint it with paint that matches tile, a hole saw would be better but they cost around 30 bucks, so this method may be better if you don't have a hole cutter
@BrooklynBalla4 жыл бұрын
jurnagin Another way if you don’t have a holesaw bit is just drill a hole with the biggest bit you have.Then use a file to file it down to size.Also you can attach a round file in your drill or use a dremel to remove the rest of the material.
@paulenyaw808523 күн бұрын
What a stupid way… just drill a hole using ceramic drill bit, widen the hole using tungsten file or use chisel tapping lightly?
@green2008z5 жыл бұрын
ho ho ho he cut the tile in the half lol lol lol
@tongvang7245 жыл бұрын
No, he cut the hole in half
@spicky29663 жыл бұрын
tks stencil rule now
@XperiaVideosCR4 жыл бұрын
Everything was right until the point where the tile was cut in two...
@ajhopman6541 Жыл бұрын
I’m confused why you held the tile up to mark the wall when you could have marked the time at the same time at very least. Hey I have an idea. Buy a 2” diamond hole saw. It’s like $25-$65 and if you’re doing work that is even half decent you better have a little coin to invest. It will speed your process up dramatically and give a FAR better result than this junk
@porfiriocadenas4404 жыл бұрын
I've done this before but I'm not a professional
@beaufighter2455 жыл бұрын
This is a joke, right?
@paultiler23294 жыл бұрын
What a waste of time. Who cuts tile in half???? Maybe 50 years ago.....
@cagrice7822 Жыл бұрын
really disappointing to find the video recommends cutting the tile in half , much much better to drill pilot hole in centre of pipe marks and then cut to size using correct size diamond tipped drill bit.....if you're going to do a job , do it well !
@mauricioh67162 жыл бұрын
Blessings, John 3:16 (NIV). Jesus loves you.
@ibringthelastwords13583 жыл бұрын
I just take the measurement method then buy a ceramic hole saw 😁
@davishernandez49386 жыл бұрын
We just cut a square on pipes but do not draw lines we do it just by eye trust. We do transfer the measures on the back to cut from the back
@maxrome673 жыл бұрын
How not to cut tiles around pipes....
@dennisgarcia11833 жыл бұрын
This is a joke right?
@COLEEN3223 жыл бұрын
Why in the name of Jesus, Joseph and Mary, didn't he just drill a neat hole? As opposed to halving the tile and having an ugly crack???
@The40Glock14 жыл бұрын
Ypu also gonna grout that cut? 🤣🤣
@RickBasset5 жыл бұрын
Wow...really?
@oguzforever4 жыл бұрын
A big disappointment. That’s a wrong application.
@Broncort1 Жыл бұрын
That’s cheating!
@lennykelly99524 жыл бұрын
Crap video he could find the centre point score it and use a masonary hole saw and knock the drill off hammer action cuts a perfect hole in the tile no joints.
@leejohn54015 жыл бұрын
you use black magic wow
@hmg89155 жыл бұрын
All if his videos have mostly thumbs down. Check out the rest of the channels content.. wtf smh? How can you be so bad at something and have the balls to put it on youtube..
@joseomar484 жыл бұрын
Are you serious? Esa mierda no se hace
@orabmacat Жыл бұрын
Or use correct technique
@MoizCOUK6 жыл бұрын
How the Fuck this you cut the hole ?
@pearldowell63343 жыл бұрын
Wow! Are you kidding me? Don't do this.
@keliberapi5 жыл бұрын
So stupid.. titles "how cut the hole".. not showing
@alfred97755 жыл бұрын
WTF....
@marianjavorka77124 жыл бұрын
This video is a complete fail. Didn’t learn anything
@reyhidalgo23 жыл бұрын
Mas calabaza para el internet .👎
@ryanteddar51897 жыл бұрын
Be sure to read Simple Solutions review on my blog before you buy. Go to *stevenreviews. com/simple-solutions-review/* Thanks. Lpd Calvin.
@jasroe5 жыл бұрын
Stevenreviews.com/simple
@jayline82505 жыл бұрын
Guess he doesn't know how to use a ruler and bit
@mattfern8675 Жыл бұрын
No.....
@brandonross77615 жыл бұрын
I hope the tile cracks
@markraymond63514 жыл бұрын
No, just no.
@zzubuzz6 жыл бұрын
I liked the method for marking the center of where the hole goes, but than when he cut it in half instead of using a hole saw I thought this was a re-run of the Benny Hill show. The only thing missing was the Saxophone playing Yackety Axe and some chick with big boobs helping. Are hole saws banned in the U.K. cause they might drill a hole in somebody cause they banned guns?
@neondiamondsaquaberry175 жыл бұрын
Slow way of doing this
@ronnavarro63583 жыл бұрын
haha
@letstalkaboutit-lta94354 жыл бұрын
It needs 2 thumbs DOWN!
@akashchauhan79195 жыл бұрын
Old way
@catlady83244 жыл бұрын
A real tile guy would be finished and home having dinner while this dummy is still cutting the tile in half! 😹
@paulclarke32746 жыл бұрын
Don't give up your day job, longwinded and unprofessional
@DmitryKolomiytsev6 жыл бұрын
Paul Clarke look how it more easy to cut holes kzbin.info/www/bejne/rIGvqZVnmciUmdk
@HassanRaza-bd3ik2 жыл бұрын
time waste
@muhammadalilala90685 жыл бұрын
No good work
@jimmytheslacker2 жыл бұрын
This is insanity. Who splits a tile just to cut around a pipe? Do this and your tile job will look terrible. Just use a diamond tile drill bit or a diamond blade on your angle grinder. Then use a metal file to smooth the edges if you want the hole to be perfect.
@HUNmerlin2 жыл бұрын
I love how everyone here just assumes the guy is an idiot instead of realizing this is just a demonstration for a case when the pipe is part of a network and you can't pull a tile on it.